FCC ID: N7KS6 Model Name: S6 Bluetooth Speaker Users Manual S6 Description Introduction Thank you for choosing the S6 Speaker as your source for entertainment. You can use this item with iPad, iPhone, iPod and many types of smart-phone to stream music and enjoy hands-free calling. For the best results, please read this manual before using the speaker. Important Safety Information 1.Keep this product and its charging cable away from excessive heat;
2.Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner;
3.Do not disassemble your device;
1.ON / OFF 2.Next Music/Volume 3.Pause/Phone 4.Previous Music/Volume 5.Bluetooth LED 6.Micro USB Charging Port 7.AUX in Port Include 1. Speaker 2. 3.5 mm Audio Cable 3. User Manual Specification BluetoothRange33ft10M TWSdistance11.5ft5M Dimensions:236mmx59.5mmx102.8mm BTVersion4.2 Output2x10W Speaker/driversize57mm4 10W Battery:7.4V 2400mAh 3C Charging:4 H Operation Power on Press and Hold button 2 seconds to power ON. Power off Press and Hold button 2 seconds to power OFF. Bluetooth Mode Pairing The unit will automatically go into Pairing Mode when it is powered ON. Go into your Bluetooth device settings menu and look for S6. After the unit has been paired and connected, it will re-connect automatically when the unit is powered on and the device is in range. Press and hold 2 seconds bluetooth will be disconnected Note: Bluetooth Timeout :10 minutes. Begin Streaming Music Press to start playing music. Press and Hold 2 seconds to play the next track. Press and Hold 2 seconds to play the previous track. Press either or for volume control. Hands-Free Function When the unit is connected and paired to your device, you can use the hands-free function with its built-in microphone. Press to accept a call. To end a call press . TWS Wireless Stereo Mode If you have two pieces S6, you can use TWS function to achieve wireless stereo combined-playing music. 1.Make sure both S6 are without any Bluetooth connection. 2.Power on both speakers, and touch each other with the side, the two speakers will connect automatically with a notifying tone. When LED blink on one speaker and keeps solid on the other one, it means the TWS connection is successful. 3.Then you can search your Bluetooth device and select S6. 4.Touch them again for Bluetooth Disconnection. 5.Press and Hold button 2 seconds on one of the units, both units will be powered off. Aux-In Mode Plug in the supplied 3.5 mm audio cable into the unit. The other end is connected to your device. The unit will automatically enter the Aux-In mode. Please note music and volume can be controlled by your device. Charging Attach the USB cable to the unit, and plug into any USB charger. If the unit is completely discharged, it will take approximately 4 hours to fully charge. These three key lights will be breath lighting when charging, and they will become solid once fully charged. Note: There will be a beep when the battery is low and needs to be recharged. Troubleshooting Unit doesnt connect to device A tone is heard every few seconds Unit will not power on Speaker needs to be connected /
re-paired to device Speaker needs to be recharged Speaker needs to be recharged Unit doesnt control track(s) / volume Unit distorts at high volume Speaker needs to be in Bluetooth mode for full control The devices volume needs to be lowered FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.