FCC ID: N7K-KR167 Wireless Headphone

Li eyson 9 Package Contents:

ya Heysong Wireless Carry bag Headphones ales |

Type-C User Guide Charging Capte 3.5mm Audio Cable Product Diagram:

Bluetooth Name. MeysOng Ma-bMU! \ QO Ce Bluetooth Chip: |L5.3 The hi in or sp Speaker Unit: OD40mm extrem OE Res NMC pwc terna Es \\ *The in USB Interface Type: Type-C Audio Connector Type: 3.5mm Low Battery Reminder: Device connection state, the voltage and do the use

*The hi no burt

*This p is lower than 3.3V reported low battery tips (30 seconds apart when once). *This p Charging: Charging will start automatically with the LED please indicator turning red. The headphones are fully charged COMPLI. when the Red LED indicator turns off. Blue light on constantly. Power display: device connection status, Bluetooth connection Bluetooth, there is a power display (some devices do not support this function) woos Power on Button: On/Off Bluetooth Button: On/Olr SS Ensure that the headphone and your Bluetooth device are adjacent (within 3ft/1m). Once switched on, the headphone enters pairing mode and the LED flashes blue and red. rues. anuscasacteese-yoin mcm pee wewerimee Git ce HUNTON YOU PONE 5 DIUELOOLT SEGICI.MEYSONYg Mo mpm! lr pairing, and the second power on will automatically connect FCC Re back after pairing is complete. This de Operat

(1) this K / fi (2) thie includi ution eneorent or revocate tne receiving antenna.

- Increase the separation between the equipment and 2adphone is not waterproof and must not be immersed 5 receiver. lashed with water; ~The product must not be used in ~ Connect the equipment into an outlet on a circuit different e temperatures. from that to which the receiver is connected. ternal structure of the headphone must not be opened Consult the dealer or an experienced radio/TV technician for es not contain any parts that require maintenance by r. If opened, the warranty of the product will be void. 2adphone should only be cleaned with a soft cloth and

-prone cleaning products should be used. roduct should not be used when driving, cycling etc. help. XK Correct Disposal of This Product (Waste Electrical &

Electronic Equipment)

(Applicable in countries with separate collection uu attention Is required. systems) roduct is not suitable for use with high power amplifiers, This marking on the product, accessories or literature use this product with care. indicates that theproduct and its electronic accessories should not be disposed of with other ANT household waste at the end of their working life. To e Ge JQ prevent possible harm to the environment or human health from uncontrolled Complies with the EU Restriction of the Use of waste disposal, please separate

} Certain Hazardous Substances' Directive, which these items from other types of waste and recycle restricts the use of certain hazardous materials and Net oe gee gga, a MSL ATA Sane. MUST PE SVUTISIOLY WW IPO Le products in order to protect the environment. sustainable reuse of material resources. Household This product is CE marked and labelled to comply users should contact either the with all provisions of the ROHS Directive 2011/65/EU. retailer where they purchased this product, or their local government office, for details of where and how they can take these items quirement . q for environmentally safe vice complies with Part 15 of the FCC Rules. : : ;

ion is subject to the following two conditions: recycling. Business users should contact their device may not cause harmful interference, and supplier and check the terms and device must accept any interference received. Coanditione af the niirchace contract Thie nractict oe a=

and its electronic accessories Changes or modifications not expressly approved by ng interference that may cause undesired operation. his equipment has been tested and found to comply

PRODUCT INSTRUCTION 1, Speaker 5, Power Button 2, Volume + (long press) Previous Track 6, Working Indicat 3, Multi-functional buttons 4, Volume - (long press) Next Track 7, Type-C Chargin 8, 3.5mm Audio P hneyson 9 Liererumtang:

Heysong Kabellose Die tite. Kopfhorer Cyl WITT Th 15 of th reasor reside canr used ir Play/Pause. Previous Song: Click Volume +

Next Song: Click Volume-

Volume limit designed for children Press and hold Volume+/Volume- for three seconds to switch between 85dB/95dB maximum volume limit (default limit is 85dB). harmft there i partict harmft can be g Port ort Volume -: Long press volume-

Volume +: Long press volume +

In Play: Click on the multi-function button to Play/Pause UMSETr Is or mor Bluetooth Name: Mevsona HS-BHO1 O Ac Bluetooth-Chip: |/5.3 Lautsprecher-Einheit: 0040mm. Sprechendes Mikrofon: CM4015, -42db+3db

-Das Kc getauc nicht bi

-Die int a USB-Schnittstellentyp: Typ-C Audio-Anschluss-Typ: 3,5 mm COMPLI. Erinnerung an schwache Batterie: Gerat Verbindungszustand, die Spannung ist niedriger als 3,3 V gemeldet niedrigen Batteriestand Tipps (30 Sekunden auseinander einmal). Aufladen: Der Ladevorgang beginnt automatisch, wenn die LED-Anzeige rot leuchtet. Der Kopfhrer ist vollstandig aufgeladen, wenn die rote LED-Anzeige erlischt und das blaue woHs

: Licht konstant leuchtet. ie Leistungsanzeige: Gerateverbindungsstatus, Ee UMS TOF a UlaSs BD algitat Gevice, pursuant tO Fart 1e FCC Rules. These limits are designed to provide able protection against harmful interference in a ttial installation, This equipment generates, uses, and diate radio frequency energy, and if not installed and

. accordance withl the instructions, may cause the party responsible for compliance could void your authority to operate the equipment. 1 interference to radio communications, However, Ss nol guarantee that interference will not occur ina ilar installation. If this equipment does causell il interference to radio or television reception, which determined by turning thel equipment off and on the PEMCUUPAGYEU LU Ly tO CUTE UIE HET Terence OY OMe e of the following measures:

-htung!

ypfhrer ist nicht wasserdicht und darf nicht in Wasser ht oder mit Wasser bespritzt werden; - Das Produkt darf ej extremen Temperaturen verwendet werden. rere Struktur des Kopfhorer darf nicht gedffnet werden a ee heysong HS-BHO1 sananap havcannaidinc-eam ea Aare ee NN NS YE EET EUROPE Email:

a ADK Kr heysong.eu@gmail.com ANT we N Le heysong.uk@gmail.com EU Importer: WOTRONICS GmbH Address: Beblostr.13 c/o Liu, 81677 Munich, Germany Complies with the EU 'Restriction of the Use of

} Certain Hazardous Substances Directive, which MANUFACTURER Dongguan Peilin Acoustic Technology Co., Ltd. Address: Building B, 3rd floor, Jinwanxin Industrial Park, restricts the use of certain hazardous materials and products in order to protect the environment. USN) Type-C Bedienungsanle Ladekabe 3.5mm Audiokabe AN\ Product Diagram:

___. Ma,

1, Sprecher PRODUCT INSTRUCTION 2, Lautstarke + (langes Driicken) 5, Power-Knopf Vorheriges Lied 6, Ladestandsar DE 3, Multifunktionale Tasten 4, Lautstarke - (langes Drucken) Nachstes Lied 7, Type-C Ladea 8, 3.5mm Audio

; 7 Hf) Bluetooth-Verbindung Bluetooth, gibt es eine Leistungsanzeige C

; Einschalttaste: Ein/Aus (einige Gerate unterstiitzen diese Funktion nicht). itung Bluetooth-Taste: Ein/Aus Stellen Sie sicher, dass sich das Kopfhrer und Ihr <4 Bluetooth-Gerat in unmittelbarer Nahe befinden (innerhalb von 1m). Nach dem Einschalten wechselt das Kopfhorer in den Pairing-Modus und die LED blinkt blau und rot. Schalten Sie die Bluetooth-Suche lhres Telefons ein: Heysong HS-BHO1 ftir das Pairing, und beim zweiten Einschalten wird die tevexvttistbeusus sellcse VEIN GULUTITIGUSUTT VWWIEUE! HEIQe ote, Hae! Uds Pairing abgeschlossen ist.

; TaN :

Lautstarkebegrenzung fiir Kinder QQ Drucken und halten Sie Volume+/Volume- drei Sekunden lang gedrtickt, um zwischen 85dB/95dB maximaler Lautstarke zu wechseln

(Die standardvorgabe ist 85dB) Wiedergabe/Pause. Vorheriger Titel: Klicken Sie auf Lautstarke +

izeige Nachster Song: Klicken Sie auf -

LAUISlafKe - LGUIStarke tang GrucKen-

LautstarkeLautstarke +: Lautstarke + lang drticken +

anschluss Im Spiel: Klicken Sie auf die Multifunktionstaste zum Abspielen/Pausieren inschluss This product is CE marked and labelled to comply Shiheng Avenue, Shipai Town, Dongguan City, Guangdong with all provisions of the ROHS Directive 2011/65/EU. Province, China, 518110 Correct Disposal of This Product (Waste Electrical &

i Learn more about the EU Declaration of Conformity:

Electronic Equipment) HLS. // WWYVWV EY SONG UOIO.COIT/ GOW I=

Applicable in countries with separate collection

(App loads-HS-BHO1-CE-Cert.html systems) This marking on the product, accessories or literature indicates that theproduct and its electronic arraccenrine chai nnt ha diennced nfiaith athor ee eS eee eee MS MS EEE MARE INT household waste at the end of their working life. To XK SC U K ay prevent possible harm to the wWoHS Cc A %

environment or human health from uncontrolled waste disposal, please separate MADE IN CHINA these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product. or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their suppuer and cneck tne terms ana conditions of the purchase contract. This product and its electronic accessories

DATE:2023/7/21 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 2104 6 Authority to Act as Agent On our behalf, I appoint BlueAsia of Technical Services(Shenzhen) Co.,Ltd And Building C, No. 107, Shihuan Road, Shiyan Sub-District, Baoan District, Shenzhen,

(Name of Agent company name and address) to act as our Guangdong Province, China I certify that this application for equipment certification. in the preparation of agent submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on ourbehalf, I acknowledge that all responsibility for complying with the terms and conditionsfor certification,still resides with KINGTA TECHNOLOGY CO., LTD. And Floor 2,Building 10/ Floor 4, Building 9, Futing industrial zone, Zhucun, Guanlan, Longhua Shenzhen China (Applicant Name and address)

<Signature>

NameMarco Pan Titlemanager Company KINGTA TECHNOLOGY CO., LTD

DATE2023/7/21 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: N7K-KR167 Product Name: Wireless Headphone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors

<Signature>

NameMarco Pan Titlemanager Company KINGTA TECHNOLOGY CO., LTD

Product Name: Wireless Headphone FCC ID: N7K-KR167 Model No. Heysong HS-BH01 KR167 All above models are identical in the same PCB layout, interior structure and electrical circuits. The differences are model name for commercial purpose.

<Signature>

NameMarco Pan Titlemanager Company KINGTA TECHNOLOGY CO., LTD

KINGTA TECHNOLOGY CO., LTD

(date)2023/7/21 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCCID: N7K-KR167)

[KINGTA TECHNOLOGY CO., LTD] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving a n equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Applicant printed name):Marco Pan KINGTA TECHNOLOGY CO., LTD

(date)2023/7/21 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCCID:N7K-KR167)

[KINGTA TECHNOLOGY CO., LTD] (the applicant) certifies that, filing of the application, the applicant is not identified on the Covered List as an entit y as of the date of the producing covered equipment. Sincerely,

(Applicant signature)

(Applicant printed name):Marco Pan

C5266091_X23_Ed.1 US AGENT LETTER OF ATTESTATION US Agent:

Company Name:Baihetian Innovative Solutions Contact Name:Kenneth Young Address:6837 Chase Rd Dearborn, MI 48126 Telephone No::313-395-3113 Fax No:/

Email:ken.young@baihetiansolutions.com FRN: 0033401605 TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 This letter is to confirm that we have accepted the responsibility to act as US agent representative on behalf of the (KINGTA TECHNOLOGY CO., LTD) noted below for all future FCC certification/registrations obtained during the period of this agreement, which ends at the specified date below. As per US agent, we are aware of the requirements involved as outlined in FCC Equipment Authorization Program in their Report and Order FCC 22-84 and the clause 2.911 Application requirements.

N7K Marco Pan

+86 13760257887 Applicant Company name: KINGTA TECHNOLOGY CO., LTD Grantee code FCC ID: N7K-KR167 Contact Name:

Address:

Telephone No:

Fax No:

Email:

FRN:0021736640 The Applicant acknowledge the acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Date: 2023-07-21 Applicants Name: Marco Pan

US Agents Name:Kenneth Young Title:

Signature Floor 2,Building 10/ Floor 4, Building 9, Futing industrial zone,Zhucun, Guanlan, Longhua Shenzhen China Title: /

Signature 1/1