all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL | Users Manual | 1.11 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | Attestation Statements |
1 | USERS MANUAL | Users Manual | 1.11 MiB |
OWNER INSTRUCTION DECT 6 CORDLESS TELEPHONE SYSTEM Contents Unpacking and Installation .....cccceseecsessseeeseeeeesessaseeseeeseesensees 7 Telephone Par t Identification ...... TDesceseceeaeeececesneeseeseeessessnaesneoes 8 Tnstallation ce ceeccesecsessccsscsssssessessscssssscsssesescnessseseasseeseesesseseeeens 9 Desk Mount \........cccsccsccsscscesssecesesssscerescesceseensseaceesesescsnecsnersvarsassecssenseeusasarsenvass 9 Wall Mount ....c..ccsccsscsscscesssscesssecssscerssssseseseseseeasecesesenssasesecssesseesseensesssssnsnurenenes 9 Tinitial Setup oo. ee eee ceeseeceeseseeseeeeeetesteeesecenseseeeesesseseeeeneneeeee 9 Setup Men oo... ee cccsesessceccseeseeectecscesssssssesssseseeaescsssesesssecesseeeeseees 9 Local Code w.ccccccscssssscessesssssecscssssssesssesesssescessssseasesececeseseeeeecsscssesssessessoesesnsesses 9 Set Default occ ccccsesccsscsescssscsersceevscssersessesasesesesseseceecesssasesecssveessseavessessseersetes 9 Set Time ..ccecccsessssssccssssessssccecsscsesssenersescesecsgesseasecseecesecassacescssessssesevsessseseass 10 Time Format .........cccccsssccsccecssecescesesecvscsessnsscnsesesssecesesseseesorassesescssevssseecacseess 10 Change PIN Code ....eccesssssescsssecssssscssessescssssssssescsescsesevesseseercncsescsenseenentseeeaeas 10 REGiSter oes ceeeecnsesescesssesecsssssosssssnsessssssscansceesssseeatenseassesanecseeanananeeesentoess 10 New Register oo... ceeecescsseseessssscnecssessssnscessesnensensessensenaessesesssesenaseaeseaseseees 11 Select Base ....cccccccssccsccessssssssesscsnsessenscsesseesseteaeesenseseeesseaesaneranesseecesesesassesessasons 11 De register ..eeecsessecscseseesececcnccceceesenssesseeeesssessssnssssssssesessassecessenreseneeenanseeseaanees 11 COmtrast coeecscesscsescesssessscssscsssesssssssssssvessssssssessscsscsssssseceseesecesecesesenecssecsssesseesess 11 LANGUAGE oes eeeceeeseserseecsesesssssnsesssssvsnsesessessessvscsssessnerssseecarseseneesssseneseeneeseese 11 Unit Name .0.......cccccscssccscssescescsessrescssceessecsssceseseeescesssavsresesesasesseesessossesseneosaness 11 AUto Talk voiccccccecsesscscssscscsssssscsscsssssssssssessesssssessessesseesssecsessesssarsescsaessesenesesnases 12 Dial Mode ...........ccccssccsctecssceseccnsecesecseesoreecerereeesseersesesssescscesssssssasssassssseaseaeess 12 Backlight Time occ seesscesessesseesssscssssessessseeesseseeesneenseneeseseessseessnensenaes 12 Telephone Featur 8 oo... ccc cccsssssseeeeeeseesesensseessseseesesersereeeeaes 13 Receiving a Call oc eceeecesserssecsssesesessssssssensssssssseeseesesscsssesessensssssereeseseeees 13 Placing & Call ...cceccsscssscssesscecsserssssssscsssscsessrsssssesssssessessresassnssnrstsssssesssneseesees 13 Predialing ......ccssssscsssscsscssssssesesesscsesenseecssssesessssesevesenssesessessesesensesensseesscssaceess 13 Duration Timer ........ccssssssescescsesonscsssseseeerensessesessssveessossssensasseeosnssnessssssacaseesees 13 Ending a Call woes cesssscssesecerapesssvsssssssscsesssseerenseessseesesseesessateaseeeeeseeneqeneees 13 Dialing eee eeeeeeesseeesessconeessssesesessescsssensesessseseseseceneeeseseessarenesessenssaneessenenes 13 RUNQCL oe eeeeseeeceeseeeeeceeecsseensasevsessssesussssuscevsessasseeeasueneseescessnesteaseassesseeeseneees 13 Reial .....cccssssscssesseccsescescsssscssssersesssesesesceaceceaceeesesensesssecssessassaveesseasossseessaseass 13 PASH oo. eeecsssscssececceseceaceescesssnceessenccssssanssseacesasessescesaecdseneasseassesessssssesensesssessees 14 Keypad Lock os. csssscssssessscerssssssssssesscsensssreesseseecenecssanesseseatenssessserenesenanees 14 Conference Call o...cccccccsscsscscseseccesseessesseeseessseaecssesssseacssscssesessasesessssssseseeaas 14 Transfer ...csccsesscscstecsccesceesssecensenersrscenssacsceseessereedsosensrsseracerseesssesvsesssuseersseeses 14 Tntercom Call oie. ieccceceseececeeeeecseeceesnesesacesensbensseaesssasesarssasons 14 Volume Contr O1 .....ccccccssssscsrecesscecsacereacensecesacscesscassnsnessssessssesseseesassrssssersteeaes 15 Profile Menu oo... cee esceeecesecesevneesecrecsecseeessesseseesensesssesesrssnseess 15 HS Ringer MUSIC o...cceessscssecessseessessresssscesscuserserseeeeerscesseresressseceesesorensesents 15 HS Ringer Vol oo... eesscesessesscsseeessvsascesssssvsssssssssensssecerssaresesseensseresesssiseseass 15 Page TON ...eccsscecccsecsseserevecssvssssssesevsssscseeessesssesssecesssseseressensessesessessseasssseseees 15 Key Tone oo. eeecsceccecssesssensssesescscesssevsessssuesssssnsssssussaesessseeaseessseesensensutensereeaees 16 Function Mend .....ccccccscccsscseesessecsecescsecseseccsecessseeseesnssenenaseeeoes 16 NOndisturb oo... ccc ccsesececeeceecseeeceesssesereeneteceeectessdssesessneseseeseeneseessesenenseeseeaes 16 ROOM Monitor oc ecceeesteseeescseeeeeeee Sv esceateceecacscesecseasecesceasesssenesssersedssensenoeees 16 Baby Call ce cccccccsscssseecssessessesesecceeseaceeseecnecsesssrenscssssseesesessessseeserseeseeeteenseeess 17 Walkie Talkie 0. cssssssseccsescscsssssssscsssssssseerseerssnsssesessssesseseeesescersesseteteneeneeeses 17 Alarm (Alarm 2 oo ieeeccssscsscesssesscessssssessersssssssseesessnesensseseeeseeenssesasseseceeesees 17 Phone Book oo... eceeeeeesecteesecseeseescsescesseussssacssssessesensnrssecssneees 18 Entering a New Number 200... eee cecceeeescscscscssesssssasesseseseesseeesesseesesessassanencens 18 Dialing from the Phone Book oo... csesesesesssseeessessseereeeeesessesseseseeessnneensseeee 18 Memory Statuis ...... ccs sesevsseseseessosssssscssesssssssssvesssevessssssseeeeeseeessasseeeseees 18 Speed Dial 0... ce ssesessssssesescsesesseseessecssscssseseassesasesnsssescessseeseesessenesessseentere ees 19 Storing a Speed Dial Number oo... cccccsessseeseseeeeeseenens sess eeaceseesssssseseassuenseess 19 Dialing a Speed Dial NOMbET oo... cece sseeceeseseeeeneeseaesenesseeentenees 19 Assigning a Number to a Group oa.ccccccccssscscceeeesesecsensseesssssceaneseeaeeensenreeeens 19 Deleting a Phone Book Entry oo... ccc csssssssscessseseseceseeeseeesenssenssneeseeseeens 19 Deleting All Phone Book Entries 0... ccccccssssssssssssssssserseseesesersssseesesseseesees 20 Bditing a Phone Book Entry ......scssesssseerssssscesseessseesseeeserssecssssssevsnssessesseeserens 20 Call LOg .cccescscscssccssececsececestecessesscssessenesnseseseesnesessessatersnaseneess 20 Reviewing Call Records ..ccccccesssssscssssssssecscesessseeessssnesssesessseseeesssessaeeeneeaces 20 Dialing from the Call Log co.cc esscssesstsessesessssssesesssseseseseseseeeesssssieseeeeseass 20 Storing a Call Log Entry to the Phone Book u.....cccccssesesesecseseseseesenssessssneeneneees 21 Deleting a Call Log Entry ccc cscssessesssecsssssecssessssseesesseessesssessessees 21 Deleting All Call Log Entries wo... ccscscssssssesessesssseessessceesseseseseesseessssneeens 21 TELEPHONE SER VICE PROBLEMS ou... eeeecesseseeseeeees 22 TROUBLESHOOTING ou....ecscsesesessssstesesesessseessesesenseeeenesesenenees 22 MAINTENANCE INFORMA. TION 0... cecescceesessseeessesereneenees 23 TELEPHONE REP AIR .00......cecesssecsenseeeceeeeceeeececeeeeteteeseesesenerees 23 LIMITED WARRANTY uc ccccssccsseseeeesscenereetesteseessetsetseneees 26 THANK YOU FOR PURCHASING THE 6012 DECT 6 CORDLESS TELEPHONE SYSTEM We want you to know all about your new telephone, how to install it, the features it provides, and the services you can expect from its use. We have included this information in your OwnerInstruction Manual. PLEASE READ BEFORE INSTALLING AND USING YOUR NEW TELEPHONE Important Safety Instructions Always follow basic safety precautions when using your telephone to reduce the risk of fire, electical shock and injury 1. 2. 3. 4, 10. 11. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Do not place this prodtict on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by persons walking on it. Do not overload wall outlet extension cords, as this can result in the risk of fire or electric shock. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on this product. To reduce the risk of electric shock, do not disassemble this product. Instead, when some repair work is required, take the unit to a qualified technician. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
When the power supply cord or plug is damaged or frayed. If liquid has been spilled into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. ae op 5 13. 14. 15. e. If the product has been dropped or cabinet has be damaged. f. If the product exhibits a distinct change in performance. Avoid using a telephone during an electrical storm. There may be a risk of electrical shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Plug the power adaptor into an electrical outlet that is near the equipment and easily accessible. Safety Instructions for Handset Battery Pack CAUTION:
There is a danger of explosion if the batteries are incorrectly replaced. Use only approved batteries in the handset of your telephone. To reduce the risk of fire or injury, be careful not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries or conducting material may overheat and cause burns. CONTAINS NICKEL-METAL HYDRIDE BATTER Y. BAITER Y MUSTBE RECYCLED OR DISPOSED OF PROPERLY 1, 2. na Do not dispose of the batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conductor may overheat and cause burns. Charge the batteries only in accordance with the instructions and limitations specified in this manual. Observe proper polarity orientation for the batteries as marked in the telephone. , Do not mix old and new batteries. Do not mix batteries of different sizes or from different manufacturers. SAVE THESE INSTRUCTIONS Unpacking and Installation Box Contents The following items should be packed with your 6012. Please contact your dealer if any of them is missing. __
[meee peeve Note: The handset is shipped with batteries installed. 7 Telephone Par t Identification feds samen |
Installation Desk Mount 1. Connect the power adapter. The power adapter connects to the round jack on the bottom of the base. Plug the large part of the adapter into the wall outlet. Use only a6VDC 350mA, center positive Class 2 adapter 3. Connect the line cord. The line cord conncects to the telephone line jack on the bottom of the base. 4. Ensure that the batteries are installed in the handset by removing the battery cover. 5. Place the handset on the base. Wall Mount 1. Connect the power adapter and the line cord. See Steps 2 and 3 above. 2. Mount the base on the telephone wall jack. 3. Ensure that the batteries are installed in the handset by removing the battery cover. 4. Place the handset on the base. Initial Setup After installing the phone, you should configure it for your location. To do this, you will need to set the local area code and the time and date. There are several other settings that you may wish to modify. All of these are contained in the SETUP menu which is discussed in detail on the following pages. Setup Menu Local Code 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. LOCAL CODE is displayed. 4, Press MENU. 5. Enter your local area code (3 Digits) with the keypad. Any calls received from this area code will be displayed as 7 digits in caller ID. If you make a mistake, use the ESC/FLASH button to erase. 6. Press MENU to save the LOCAL CODE. Set Default Use this to return the unit to the original settings. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. Set Time 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until SET TIME is displayed. 5. Press MENU. The year begins to flash at the bottom right of the screen. 6. Press CID/UP to increase the year value. Press Volume Down button to decrease the year value. 7. When the correct year value is displayed, press MENU. Now the month value begins to flash. 8. At this point, you can enter values for month, day, hour and minutes as described in Steps 6 and 7 above. However, you can also just press MENU 4 times to accept the current values. All values except the year will be reset by any caller ID (CID) calls. Time Format 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4. Press CID/UP until TIME FORMAT is displayed.. 5. Use CID/UP or Volume Down to toggle between 24 Hour and 12 Hour Format. 6. When the desired format is selected, press MENU. Change PIN Code Use this selection to change the PIN code that links the handset to the base. The default PIN code is 1234. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4, Press CID/UP until INPUT PIN is displayed. 5. Use the keypad to enter the new PIN (4 digits). Use ESC/FLASH to erase. numbers. 6. Press MENU when finished. Register Use this option to force the handset to register to a base or to deregister it from a base. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4, Press CID/UP until REGISTER is displayed. 5. Press MENU 6. Use CID/UP to select between New Registration, Select Base, and Deregister 10 Contrast 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3, Press MENU. 4, Press CID/UP until CONTRAST is displayed. 5. Use CID/UP or Volume Down to select a contrast value between | and 8. New Register 1. Press MENU. BASE UNIT is displayed. 2. Use CID/UP to select between Base 1 and Base 2. 3. Press MENU. INPUT PIN is displayed. 4, Use keypad to enter the 4 digit PIN. 5. Press MENU. Unit will begin registration. This may take up to 2 minutes. Select Base I. Press MENU. 2. Use CID/UP to select between Base 1, Base 2 andAuto Select. 3. Press MENU. Deregister 1. Press MENU. INPUT PIN is displayed. 2. Use keypad to enter the 4 digit PIN. 3. Press MENU. Unit will deregister from base. The contrast of the screen will change as the numbers are changed. 6. When the desired contrast level is selected, press MENU. Language 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4, Press CID/UP until LANGUAGE is displayed. 5. Use CID/UP or Volume Down to select English, Spanish or French. 6. When the language is selected, press MENU. Unit Name 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4, Press CID/UP until UNIT NAME is displayed. 5. Press MENU. 6. Use the keypad to enter the desired unit name. You may enter up to 8 -
characters. Use the ESC/FLASH button to erase if you make a mistake. 11 nt Auto Talk If Auto Talk is ON, calls will be answered by removing the handset from the base. If Auto Talk is OFF, you must press the ANSWER button to answer a call. The default setting is OFF. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4, Press CID/UP until AUTO TALK is displayed. 5. Press MENU. 6. Use CID/UP to select between ON and OFF 7. Press MENU. Dial Mode Use this option to select TONE or PULSE dialing. The default setting is TONE. 1. Press MENU. 2. Press CID/UP until SETUP is displayed. 3. Press MENU. 4, Press CID/UP until DIAL MODE is displayed. 5. Press MENU. 6. Use CID/UP to select between TONE and PULSE. 7. Press MENU. Backlight Time Use this option to change the time that the display is lighted after coming off hook or pressing a key. 1. Press MENU. Press CID/UP until SETUP is displayed. Press MENU. Press CID/UP until BACKLIGHT TIME is displayed. Press MENU. Use CID/UP io select a value between 5 seconds and 20 seconds. Press MENU. NAMB Wh 12 Telephone Featur es Receiving a Call When the phone rings, remove the handset from the base and press the green ANSWER button or the SPEAKER button to answer the call. You may toggle between normal mode and SPEAKER mode by pressing theANSWER button. Note: If the phone is configured forAUTO TALK ON, you will be connected as soon as the handset is lifted from the base. Placing a Call To place a call, remove the phone from the base and press the sreenANSWER button or the SPEAKER button. After you hear dial tone, dial the desired number. Predialing It is also possible to predial your numbers. To do this, enter the desired numbers first. The numbers will appear on the display and will be dialed out when you press the ANSWER button or SPEAKER button. Duration Timer A timer will start counting 6 seconds after you lift the handset or 6 seconds after you dial a telephone number. Ending a Call To end a call, either press the red HANG UP button or return the handset to the base. Dialing The 6012 is capable of either TONE or PULSE dialing. The default dialing mode is TONE. In almost all cases, that will be correct. To change the dialing mode, see the DIAL MODE section under the SETUP menu. Ringer You may choose from 20 ring tones. Detailed instructions for selecting a ring tone are given in the PROFILE MENU section. Redial There are two ways to redial the last number dialed. To redial immediately, press the ANSWER button or the SPEAKER button, and then press the REDJAL button. 13 Flash This telephone provides a line break signal for accessing PABX service or for use of Call Waiting from your local telephone company. If you have Call Waiting service, you can use the Call Waiting function per the following instructions. i. While having a conversation, another party calls and you hear a tone. 2. Press ESC/FLASH once and release. The first conversation is placed on hold and the second call can be answered. 3. Press ESC/FLASH again and release. You may speak to the first caller again and the second call is placed on hold. Keypad Lock To lock the keypad, press and hold the # key for 2 seconds. A small key icon will appear in the display. To unlock, press and hold the # key again for 2 seconds. Conference Call The 6012 can make a conference call between one outside party and two 6012 handsets registered to the same base. 1. Initiate a call to the outside party from one of the 6012 handsets. 2. Once the outside call is connected, press INT/TRF. 3. Dial the registration number of the second 6012 handset. 4. Once the second handset answers, press INT/TRF to create a conference call. Transfer The 6012 can transfer an outside call to any other handset registered to the same base. 1. Press INT/TRE 2. Dial the registration number of the handset to receive the transferred call. 3. Hang up the phone or wait until the second handset answers and then hang up. Intercom Call The 6012 can make intercom calls between any 2 handsets registered to the same base. , i. Go off hook. 2. Press INI/TRE 3. Dial the registration number of the handset to receive the intercom call. 14 MDM PWN AW PWN re Volume Contr ol During a call in either handset or speaker mode, you can press CID/UP to increase recieve volume and CID/DOWN to decrease volume. Profile Menu This menu allows you to set the tones made by the phone. HS Ringer Music This selects the ringer tone. Ring tones can be assigne for up to five different groups. Numbers placed in these groups will then ring with that tone. Press MENU. Press CID/UP until PROFILE is displayed. Press MENU. Press MENU. The DEFAULT GROUP will be displayed. Press CID/UP until the desired group is displayed. Press MENU. The current MELODY for that group will be displayed. Press CID/UP to select a melody. A sample of each melody will play as you step through them. 8. After the desired melody is displayed, press MENU. HS Ringer Vol This selects the ringer volume. Only one ring volume can be set. It will be the same for all ring groups. Press MENU. Press CID/UP until PROFILE is displayed. Press MENU. HS RINGER MUSICwill be displayed. Press CID/DOWN. HS RINGER VOL will be displayed. Press MENU. The current volume will be displayed. Press CID/UP or CID/DOWN until the desired volume is selected. A sample of the volume will play as you change settings. 7. When the desired volume is reached, press MENU. Page Tone This selects the tone played by the handset when the PAGE button on the base is pressed. There are four different page tones. Press MENU. Press CID/UP until PROFILE is displayed. Press MENU. HS RINGER MUSICwill be displayed. Press CID/DOWN until PAGE TONE is displayed. 15 AWN Pr nr Press MENU. The current page tone will be displayed. 6. Press CID/UP or CID/DOWN to select a tone. A sample of each tone will play as you change settings. 7. When the desired tone is selected, press MENU. Note that the page tone will not change until the handset is returned to the base. Key Tone This selects the sound that is made when a key is pressed. The choices are: OFF
- No Tone, TONE ~ Each key makes the same tone, and MUSIC - Each key makes a different tone. Press MENU. Press CID/UP until PROFILE is displayed. Press MENU. HS RINGER MUSICwiill be displayed. Press CID/DOWN until KEY TONE is displayed. Press MENU. The current key tone setting will be displayed. Press CID/UP or CID/DOWN to select between OFF TONE, and MUSIC. When the desired tone is selected, press MENU. MIAME WNP Function Menu This menu allows you to access the special features of the phone. Nondisturb This feature disables the ringer of the handset. You can choose to have the ringer disabled from 1 to 16 hours or select OFF to have the phone ring normally Press MENU. Press CID/UP until FUNCTION is displayed. Press MENU. NONDISTURB will be displayed. -
Press MENU. HOUR and the current NONDISTURB setting will be displayed. 5. Press CID/UP or CID/DOWN to select OFF or the number of hours for NONDISTURB. 6. Press MENU. If you selected a value other than OFE notice the NONDISTURB symbol in the display PwN Pr Room Monitor This feature enables you to listen to a room using the transmitter of the handset. 1. Press MENU. 2. Press CID/UP until FUNCTION is displayed. 3. Press MENU. NONDISTURB will be displayed. 4, Press CID/UP. ROOM MONITOR will be displayed. 16 WP wD Pe 5. Press MENU twice. ROOM MONITOR will begin to bllink on the display The unit is now in ROOM MONITOR mode. 6. To use the handset as a room monitor initiate an intercom call to it from another handset. Baby Call This feature will allow you to progarm an emergency number This number will be dialed whenever the phone is taken off hook. Warning: If this feature is activated, the phone cannot be used to dial 911. ANWR WN Press MENU. Press CID/UP until FUNCTION is displayed. Press MENU. NONDISTURB will be displayed. Press CID/UP until BABY CALL is displayed. Press MENU. INPUT NUMBER will be displayed. Press MENU. Ifa number is stored, it will be displayed. Use ESC/FLASH to delete numbers. Use the keypad to enter numbers. 7. When you are finished entering numbers, press MENU. 8. Press CID/UP. Select ON/OFF is displayed. 9. Press MENU. The current setting (ON or OFF) will be displayed. 10. Press CID/UPor CID/DOWN to toggle between ON and OFF. 11. When the desired setting is selected, press MENU. 12. If you have activated this feature, BABYCALL will flash on the display. Walkie Talkie Press MENU. Press CID/UP until FUNCTION is displayed. Press MENU. NONDISTURB will be displayed.
' Press CID/UP until Walkie Talkie is displayed. Press MENU twice to enter Walkie Talkie mode. The handset will now connect to all other handsets registered to the same base. 6. Press MENU twice to exitWalkie Talkie mode. Alarm 1/Alarm 2 The 6012 will allow you to set up to two alarm times. At this time, the ringer of the telephone will ring. BwNP Press MENU. Press CID/UP until FUNCTION is displayed. Press MENU. NONDISTURB will be displayed. Press CID/UP untilALARM 1 orALARM 2 is displayed. 17 wm Press MENU. The current setting of the alarm will be displayed. Press CID/UP to toggle between ON and OFF 7. Ifthe alarm is turned on, SET TIME will display and the alarm time will show in the lower right of the display. 8. To-setthe alarm time, press MENU. 9. Use CID/UP or CID/DOWN to select the hour Note that you must select the AM or PM value at this time. 10. When the hour is selected, press MENU. 11. Used CID/UP or CID/DOWN to select the minutes. 12. Press MENU. If you have activated an alarm, notice the alarm clock symbol in the display. Phone Book The 6012 can store the numbers of up to 100 of your contacts in the phone book. Names are sorted alphabetically starting with the first character. (If you want your Phone Book sorted by the last name, enter the last name first.) ca Entering a New Number j. Press PHONEBOOK. The first entry in the phone book is displayed. 2. Press MENU. NEWENTRY is displayed. 3. Press MENU. INPUT NAME is displayed. 4, Use the keypad to enter the name. Use the 0 key to enter a space. Use the ESC/FLASH key to delete a character You may enter up to 16 characters. Press MENU. INPUT NUMBER is displayed. 6. Use the keypad to enter the number Use the ESC/FLASH key to delete a character. You may enter up to 24 digits. 7. Press MENU. 8. Press the HANG UP key to exit the Phone Book. wm Dialing from the Phone Book 1. Press PHONEBOOK. 2. Use CID/UP or CID/DOWN to scroll to the desired entry 3. Press ANSWER and the number will be dialed. Memor y Status This wil] tell you how many entries are in your phone book. Press PHONEBOOK. The first entry in the phone book is displayed. Press MENU. NEWENTRY is displayed. Press CID/UP. MEMORY STATUS is displayed. Press MENU. The number of phone book entries is displayed as XXX/100 where _]XX7is the number of phone book entries. 5. Press the HANG UP key to exit the Phone Book. PWN 18 Speed Dial You may store up to 10 of the Phone Book entries as Speed Dial numbers for ease of dialing. Storing a Speed Dial Number Press PHONEBOOK. Use CID/UP or CID/DOWN to scroll to the desired entry Press MENU. NEWENTRY is displayed. Press CID/UP until SPEED DIAL is displayed. Press MENU. HOT KEY 0 TO 9 is displayed. Press the desired key. The unit will beep to confirm and the phone number will be displayed. 7. Press the HANG UP key to exit the Phone Book. Dialing a Speed Dial Number 1. Press and hold the key assigned to the desired speed dial number for 2 seconds. The number will show in the display. 2. Press ANSWER or SPEAKER to dial the number AMP WN re Assigning a Number to a Group The 6012 allows you to assign your phone book entries to 1 of 5 groups. Groups can have special ring tones assigned to them. Press PHONEBOOK. Use CID/UP or CID/DOWN to scroll to the desired entry Press MENU. NEWENTRY is displayed. Press CID/UP until SELECT GROUP is displayed. Press MENU. DEFAULT GROUPis displayed. Use CID/UP or CID/DOWN to scroll to the desired group. The choices are DEFAULT, VIP FAMILY, FRIEND, and COLLEAGUE. When the desired group is shown, press MENU. The unit will beep to confirm and the phone number will be displayed. 8. Press the HANG UP key to exit the Phone Book. AAP WN
Deleting a Phone Book Entry Press PHONEBOOK. Use CID/UP or CID/DOWN to scroll to the desired entry Press MENU. NEWENTRY is displayed. Press CID/UP until DELETE RECORD is displayed. Press MENU. The unit will beep to confirm and the next phone number in the phone book will be displayed. Press the HANG UP key to exit the Phone Book. We WN re aN 19 Deleting All Phone Book Entries Press PHONEBOOK. Press MENU. NEWENTRY is displayed. Press CID/UPunti] DELETE ALL is displayed. Press MENU. CONFIRM is displayed. Press MENU. The unit will beep to confirm and EMPTY will be displayed. Press the HANG UP key to exit the Phone Book. Editing a Phone Book Entry Press PHONEBOOK. Use CID/UP or CID/DOWN to scroll to the desired entry Press MENU. NEWENTRY is displayed. Press CID/UP until EDIT RECORD is displayed. Press MENU. The name will be displayed. Use ESC/FLASH to delete characters. Use the keypad to add characters. Press MENU. The number will be displayed. Use ESC/FLASH to delete digits. Use the keypad to add digits. Press MENU when finished. The unit will beep to confirm and the editied entry will be displayed. 10. Press the HANG UP key to exit the Phone Book. Call Log The 6012 will store records of your calls. It records missed calls, received calls, and dialed calls. Each of these records can be dialed, stored to the phone book or deleted. MAMA WN WHONAARWNE Reviewing Call Records Press MENU. PHONEBOOK is displayed. Press CID/UP CALLLOG is displayed. Press MENU. MISSED CALL is displayed. Use CID/UP or CID/DOWN to select either MISSED CALL, RECIEVED CALL, or DIALED CALL. Press MENU. The first entry in the list is displayed. Use CID/UP or CID/DOWN to review the call records. AONE Dr Dialing from the Call Log 1. Follow the procedure for reviewing call records above to display the desired record. 2. Press ANSWER or SPEAKER and the displayed number will be dialed. 20 Storing a Call Log Entr y to the Phone Book 1. Follow the procedure for reviewing call records above to display the desired record. 2, Press MENU. STORE RECORD is displayed. 3. Press MENU. INPUT NAME is displayed. 4, Use the keypad to enter the name. Use 0 for space. Use ESC/FLASH to delete a character. 5. Press MENT. INPUTNUMBER is displayed. The selected number is displayed at the bottom of the screen. 6. Use the keypad to make any changes needed to the number. Use ESC/
FLASH to delete digits. 7. Press MENU. The unit will beep to confirm that the number is stored. 8. Press the HANG UP key to exit the Call Log. Deleting a Call Log Entry 1. Follow the procedure for reviewing call records above to display the desired record, 2. Press MENU. STORE RECORD is displayed. 3. Press CID/UP or CID/DOWN until DELETE RECORD is displayed. 4, Press MENU. The unit will beep to confirm the deletion. 5. Press the HANG UP key to exit the Call Log. Deleting All Call Log Entries You can delete all the entries in any section of the Call Log. 1. Vs wWH Follow the procedure for reviewing call records above to display a record in the desired section. _ Press MENU. STORE RECORD is displayed. Press CID/UP or CID/DOWN until DELETEALL is displayed. Press MENU. CONFIRM is displayed. Press MENU. The unit will beep to confirm the deletion. EMPTY is dis-
played. 21 TELEPHONE SER VICE PROBLEMS If you have any problems with your telephone service , determine if the problem is with your unit or the telephone company lines BEFORE CALLING THE TELE-
PHONE COMPANY. Be aware that the telephone company may chage you for a service call if the problem is caused by your telephone. TROUBLESHOOTING PHONE DOES NOT RING 1. Line cord is disconnected at telephone outlet or at telephone. 2. Phone isOFF HOOK . Make certain the phone is well seated in the base. NO DIAL TONE Wire is disconnected at telephone or at wall jack. Test the telephone in a different wall jack. If it works, the first jack may be defective. BLANK SCREEN Check if the adapter is connected properly. CALLERS ARE NOT DISPLAYED ON THE SCREEN 1. Verify that you have subscribed to the appropriate service (Caller ID and Call Waiting Caller ID) from your telephone company. If you only subscribed to Caller ID service the unit will not display call waiting caller ID information. 2. Check if your answering machine is set to answer before 2 rings. NO CALLER INFORMATION IS DISPLAYED WHEN HEARING THE CALL WAITING BEEP Verify that you have subscribed to Call Waiting Caller ID service from your telephone company. MESSAGE ERROR HAPPENS FREQUENTLY Caller information was not transmitted properly Check with your telephone company to see if there is a problem with your phone line. Since the 6012 will retain your stored call records even with the power adapter disconnected, we encourage you to disconnect all the telephone cords and adapter; and then reinstall the unit step by step per this instruction manual before you ask for service. 22 MAINTENANCE INFORMA TION Treat your telephone equipment with car e for trouble-free performance Avoid dropping the handset. Carefully place the handset in the base after use. Avoid putting near heating appliances and devices that generate electrical noise
(for example, motors and florescent lamps). Clean your telephone equipment with a damp cloth . Stains may be removed with a mild soap. Do not use liquid or aerosol detergents or cleaning agents. Do not expose to direct sunlight or moisture Retain the original package in case you need to ship it at a later date. TELEPHONE REPAIR DO NOTATTEMPT TO REPAIR THIS PRODUCTYOURSELE Telephones manufactured by CORTELCO must be returned to us for repair You can return your telephone to CORTELCO for repair or replacement in accordance with our LIMITED WARRANTY. CORTELCO warrantsTHIS PRODUCT against defects in material and workman-
ship in accordance with our LIMITED WARRANTY. If your telephone is returned for repair, include a copy of your sales receipt containing the date-of purchase. DO NOTINCLUDETHE ORIGINALSALES RECEIPT If date-of-purchase is not included, the factory date printed on the label on the bottom of your telephone will be used as the date-of-purchase. The factory date allows six months for distribution and sale of this product. If you return your telephone for repair, the warranty period is not extended. The original date-of-
purchase continues to apply to your warranty. OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after the LIMITED WARRANTY has expired if you send it to us in a complete and undamaged condition. The repaired unit will be shipped to you C.O.D., freight collect. RETURN-FOR-REP AIR PACKAGING If you are returning a unit to us for repair, package it car efully, preferably in the original car ton. Be sure to include your return address, a copy of the sales receipt showing date-of-purchase, and a note describing the pr oblem you have with your Telephone. Shipping must be prepaid. If the telephone is in warranty , it will be zepair ed or replaced, at our option, at no cost to you, and it will be returned shipping prepaid. Ship your telephone (shipping prepaid) to:
CORTELCO REPAIR CENTER 1703 SAWYER ROAD CORINTH, MS 38834 23 FCC I NFORMATION Part 68 is a Federal regulation which requires equipment to be tested and registered with the FCC prior to its connection to the network. This equipment complies with Part 68 of FCC rules. On the bottom of the telephone is a label that contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. The Ringer Equivalence Number , which is used to determine the number of devices you may connect to your phone line, indicates the amount of power that your telephone draws from the telephone company line during ringing. If you have more than one telephone (or other terminal device) connected to the telephone company line, you should total the ringer equivalence numbers (REN s), and be sure that the total is not more than five. Your telephones may not ring if the total is more than five. Also, in some rural locations, your telephone may not ring if the REN total is more than three. RESTRICTIONS You must not connect your telephone to coin-operated lines or party lines. INSTALLATION This model telephone must be connected to the telephone company lines through a modular jack. The required USOC for the modular jack is RJ11C for desk mounting and RJ11W for wall mounting. The USOC number is printed on the label on the bottom of your telephone. HEARING-AID COMP ATIBILITY The handset on your telephone will work with magnetically-coupled hearing aids. You can use a hearing aid equipped with aT (Telephone) switch. IN CASE OF TROUBLE If your telephone should cause problems on the telephone line, the telephone company can temporarily disconnect your service. The telephone company must then notify and allow you to correct the problem. The telephone company may from time to time change its lines or equipment. They must notify you if planned changes will affect your telephone service, to allow you to take steps to prevent interruptions. Part 15 regulates the electromagnetic energy emitted by equipment to minimize
- interference to radio, television, and other wireless devices. This telephone complies with Part 15 of the FCC Rules. In the unlikely event that interference occurs, move the telephone and/or radio, television, etc. to increase the separa-
tion distance. 24 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference;
and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is receiving the interference). * Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
* Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected PCC RF Radiation Exposure Statement The installation of the base unit shouldallow at least 20 centimeter between the base and persons to be in compliance with FCC RF exposure guidelines. For body worn operation, the portable part (handset) has been tested and meets FCC RF exposure guidelines. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 25 LIMITED W ARRANTY If you purchased this product new in the U.S. or Puerto Rico.CORTELCO warrants it against defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty is in lieu of all other express warranties. During the warranty period,COR TELCO agrees to repair or at its option, replace the defective product, or any part of it without charge for parts or labor. This is your exclusive remedy. This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or opera-
tion, lack of reasonable care, the affixing of any attachment not provided by CORTELCO with the product and loss of parts. The warranty is voided in the event any unauthorized person alters or repairs the unit. Telephone companies use different types of equipment and offer various types of services to customers.CORTELCO does.not warrant that this product is compatible with the type of equipment of any particular phone company or the services provided by it. CORTELCO DISCLAIMS ANY IMPLIEDWARRANTY, INCLUDINGTHE WARRANTY OF MERCHANTABILITYAND THE WARRANTY OF FITNESS FORA PARTICULAR PURPOSEAS OFTHE DATE ONEYEAR FROMTHE ORIGINALPURCHASE OFTHE PRODUCTCORTELCO ASSUMES NO RESPONSIBILITYFOR ANY SPECIAL, INCIDENAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY GIVESYOU SPECIFIC LEGAIRIGHTS,AND YOU MAY HAVE OTHER RIGHTSWHICH VARY FROM STATETO STATE. SOME STATES DO NOTALLOWTHE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR CONSEQUENTIALDAMAGES OR LIMIBTIONS ON HOW LONGAN IMPLIEDWARRANTYLASTS, SOTHEABOVE EXCLUSIONAND LIMITATION MAY NOTAPPLY TO YOU. If failure occurs and your telephone is in warranty, service shall be provided by returning it toCOR TELCO - Repair Center, 1703 Sawyer Road, Corinth, Mississippi 38834, shipping prepaid .The product will be repaired or replaced if examination by us determines the product to be defective. Telephones received damaged as a result of shipping will require you to file a claim with the carrier Rev. 1.0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-07-17 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-07-17
|
||||
1 | Applicant's complete, legal business name |
KINGTEL Corporation
|
||||
1 | FCC Registration Number (FRN) |
0017520578
|
||||
1 | Physical Address |
10F, No. 510, Sec. 1, Neihu Road, Neihu District
|
||||
1 |
Taipei City, N/A 11493
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
V42
|
||||
1 | Equipment Product Code |
6012D6
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C******** P********
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
h******@etc.org.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | US DECT BASE UNIT | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Electronics Testing Center, Taiwan
|
||||
1 | Name |
W**** T********
|
||||
1 | Telephone Number |
886-3********
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
w******@etc.org.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 68 | 1921.53600000 | 1928.44800000 | 0.0730000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC