TM Model M operating manual Table of Contents 1. APPLICATION .......................................................................................... 4 2. TECHNICAL SPECIFICATIONS ................................................................ 5 3. PACKAGE CONTENTS ............................................................................. 8 3.1. T1-D PACKAGE CONTENTS .................................................................................. 8 3.2 KEY ELEMENTS ..................................................................................................... 8 4. HYPERVSN MODEL M ASSEMBLY ...................................................... 9 5. HYPERVSN MODEL M INSTALLATION AREAS ................................... 12 5.1. PROHIBITED AREA ............................................................................................. 12 5.2. INSTALLATION REQUIREMENTS ....................................................................... 12 5.3. SUGGESTED SITES ............................................................................................. 13 6. INSTALLATION GUIDE ........................................................................... 14 6.1. HYPERVSN MODEL M INSTALLATION .............................................................. 14 6.2. INSTALLATION PROTOCOLS FOR CONNECTED HYPERVSN MODEL M. 15 7. HYPERVSN MODEL M OPERATION ..................................................... 18 7.1. OPERATING MODES OVERVIEW ....................................................................... 18 7.2. SWITCHING DEVICE ON AND OFF ..................................................................... 18 7.2.1. LED BLINK PATTERNS ...................................................................................... 18 Kino-mo LTD 2018. All rights reserved M01Db 2 7.2.2. ENGINE OPERATION LOCKOUT ................................................................ 20 7.3. INITIAL ACTIVATION .................................................................................................... 21 8. TECHNICAL MAINTENANCE . . 34 9. SAFETY PROVISIONS . . 35 10. DISPOSAL. . 37 10.1. PACKAGING. . 37 10.2. DEVICE DISPOSAL ........................................................................................... 37 11. WARRANTY AND MAINTENANCE .......................................................... 38 11.1. WARRANTY ....................................................................................................... 38 11.2. SERVICE MAINTENANCE AND SPARE PARTS ....................................... 38 11.3. SPECIAL REQUIREMENTS ................................................................................ 38 Kino-mo LTD 2018. All rights reserved M01Db 3 Hypervsn Model M Operating Manual WARNING! The present operating manual must be carefully read before using the device. The operating manual covers device(s) (hereinafter referred to as the device, devices or Hypervsn Model M) overview, technical specifications, safety requirements, and other information required to operate Hypervsn Model M. The present operating manual is designed for Hypervsn Model M. Hypervsn Model M complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Kino-mo Ltd, the manufacturer, disclaims all liability for any harm caused to a consumer by improper device operation and use. No changes shall be made to the equipment without the manufacturers permission as this may void the users authority to operate the device. The device appearance may vary slightly from the pictures presented in the current manual. Thank you for purchasing our product. PLEASE READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE CONNECTING THE DEVICE TO A POWER SOURCE. Kino-mo LTD 2018. All rights reserved M01Db 4 Hypervsn Model M Operating Manual The present operating manual is designed for Hypervsn Model M. Hypervsn Model M is designed to display videos and images formed by spinning rays. The content is uploaded through a Wi-Fi connection. The device is to be connected to single-phase alternating current mains with 110/230V voltage and 50/60Hz frequency and can be operated continuously while plugged in. The device has Class A electromagnetic compatibility. The device is designed for static mounting on walls, custom-made structures such as free-standing structures or structures hanging from the ceiling or other stable surfaces and can be operated indoors under the following conditions:
1. Temperature range from 0 C to +35 C. 2. Relative humidity up to 80%. Basic technical device specifications are listed in Table 1 (page 6). The device consists of two major elements:
1. Rotor 2. Stator The device assembly process is specified in paragraph 4. Kino-mo LTD 2018. All rights reserved M01Db 5 Hypervsn Model M Operating Manual SPECIFICATIONS Table 1. Basic technical specifications PARAMETERS DESCRIPTION MODEL M Maximum image size (diameter) 567 mm Dimensions, mm Diameter Depth Number of LED rays Rotational speed Number of LEDs per each LED ray Average power consumption Rated voltage Rated current Input AC frequency Net weight Noise figure on the device axis
(3 metres from the unit) 567 mm 174 mm 4 670 RPM 168 35 W 110/230V 1,0/0,5A 50/60 Hz 2.8 kg 45 Db Fuse ceramic 4A 250VAC 5X20MM Kino-mo LTD 2018. All rights reserved M01Db 6 Hypervsn Model M Operating Manual Power cable length 3 metres Power cable thickness 8 mm (max) Plug: the size of the head of the plug depends on its region. Kino-mo LTD 2018. All rights reserved M01Db 7 Hypervsn Model M Operating Manual CONTENTS Table 2. T1-D package contents COMPONENT NAME QUANTITY Stator Rotor Wall bracket Operating manual Set screw 3.2 Key elements Table 3. Components of the device 1 piece 1 piece 1 piece 1 piece 1 piece ROTOR STATOR WALL BRACKET Kino-mo LTD 2018. All rights reserved M01Db 8 Hypervsn Model M Operating Manual MODEL M ASSEMBLY Picture 1. Wireless antenna Attention. Please mind the device wireless antenna integrity. Make sure you do not cut the antenna off. Before assembling the device, make a visual check of its components integrity. Rays should not have any cracks or other visual damages. The stator should not have any dents and contain 4 tightened screws on the back side. Make sure that the shaft axis is parallel to the ground and turns on its axis (rotate the shaft with your fingers). Contact your supplier if you notice any disproportions during the visual check. A screwdriver with a PH2 bit is required to assemble the device. The device is to be assembled in the order shown in Table 4 below:
Kino-mo LTD 2018. All rights reserved M01Db 9 Hypervsn Model M Operating Manual Table 4. Hypervsn Model M assembly 1. The recess in the shaft (marked with a turquoise arrow on the right image below) needs to be positioned so that it remains against the white mark on the rotor (marked with a turquoise arrow on the left image below). ROTOR STATOR Picture 2. Placing the recess in the shaft 2. Take the rotor carefully while trying not to damage the rays. Place it gently and fit straight onto the stator shaft as shown below. You will hear a typical click. Picture 3. Fitting the rotor onto the stator shaft Kino-mo LTD 2018. All rights reserved M01Db 10 Hypervsn Model M Operating Manual Kino-mo LTD 2018. All rights reserved M01Db 11 Hypervsn Model M Operating Manual 5. MODEL M INSTALLATION AREAS It is prohibited to install the device without the dome (regardless of the height) in the following areas:
1. Children playgrounds, 2. Animal open-air cages, 3. Areas with birds and insects that can get in contact with the device, 4. Next to any objects (curtains, drapes) that can potentially come in contact with the device under the influence of wind or in any other way. 1. The device is allowed to be used indoors only at the temperature ranging from 0 C to +35 C and relative humidity of up to 80%. 2. The device must be installed out of public reach and reach of animals (dogs, cats, etc.). Such sites include but are not limited to:
a) Custom-made device installation structures without free inward access, b) Closed-type display cases provided that the personnel examines the safety provision. 3. If the device is installed in public places, the mounting height must be at least 2.9 meters. The mounting height is defined as the distance from the floor level to the lowest point of the rotating element. 4. Please do not install the device in areas affected by high temperatures, heavy steam/vapor, great amount of dust, or close to heaters, air conditioners, radiators, ovens and other similar equipment. 5. The device should not be installed under direct sunlight. Kino-mo LTD 2018. All rights reserved M01Db 12 Hypervsn Model M Operating Manual Please read the requirements below carefully to achieve the best visual effect of the device:
1. Do not install the device in close proximity to bright light sources such as large LED displays, projector screens. 2. The most suitable background colour for device installation is dark grey
(anthracite). To achieve a better effect do not install the device against white or very light background. 3. Please do not install a single Hypervsn Model M unit in spacious premises since this will significantly decrease the visual effect. It is recommended to install at least two Hypervsn Model M devices side by side in premises of over 100 square metres and with ceilings 5 metres high; and at least three Hypervsn devices side by side in premises over 200 square metres and with ceilings 5 metres high. Under such circumstances it is critical not to space the devices apart but install them side by side. 4. The recommended device installation angle is 90 to the mounting surface. Kino-mo LTD 2018. All rights reserved M01Db 13 Hypervsn Model M Operating Manual GUIDE Installation can be completed only by an authorised specialist. Select the required mount based on the bearing surface where the device will be placed. The bracket has three holes, each with a 5.2 mm diameter. Important. Screwhole diameter:
Partition Wall - 5.2 mm Solid Wall - 5.0 mm 1. Drill holes in the surface area so that the central hole of the fixture faces upwards. 2. Screw the bracket tightly into the wall with the relevant fittings. 3. Place the device on the wall bracket and fit it firmly downwards. 4. Attach the set screw to the bracket. Picture 6. Device installation against a wall Kino-mo LTD 2018. All rights reserved M01Db 14 Hypervsn Model M Operating Manual Attention:
In order to avoid illegal actions by unauthorised persons with regards to the device, do not forget to secure it with the set screw (4). Before pressing the On button make sure that the device remains at a safe distance from the viewer at least 0.5 metres. The correct Hypervsn Model M installation angel is 90 to the surface (shaft axis should be parallel to the ground). Protocols for connected Hypervsn Model M and recommended spacing between the central points of the brackets are as follows: 403 mm (accuracy 0.5 mm) Grey devices: front White devices: back Table 5. Multi-unit installation patterns HYPERVSN WALL PRE-SETS DESCRIPTION 403 mm m m 3 0 4 m m 3 0 4 Hypervsn Wall pre-set: 6 units;
Height: 1.38 meters; 54 inches;
Width: 0.97 meters; 38 inches 4 0 3 m m 4 0 3 m m 403 mm Kino-mo LTD 2018. All rights reserved M01Db 15 m m 3 0 4 m m 3 0 4 m m 3 0 4 m m 3 0 4 m m 3 0 4 m m 3 0 4 m m 3 0 4 4 0 3 m m Hypervsn Model M Operating Manual Hypervsn Wall pre-set: 6 units;
Height: 0.97 meters; 38 inches;
Width: 1.38 meters; 54 inches Hypervsn Wall pre-set: 9 units;
Height: 1.38 meters; 54 inches;
Width: 1.38 meters; 54 inches Hypervsn Wall pre-set: 15 units;
Height: 2.18 meters; 85 inches;
Width: 1.38 meters; 54 inches 4 0 3 m m 4 0 3 m m 4 0 3 m m 4 0 3 m m 4 0 3 m m 4 0 3 m m 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm Kino-mo LTD 2018. All rights reserved M01Db 16 Hypervsn Model M Operating Manual Hypervsn Wall pre-set: 15 units;
Height: 1.38 meters; 54 inches;
Width: 2.18 meters; 85 inches Hypervsn Wall pre-set: 28 units;
Height: 1.78 meters; 70 inches;
Width: 2.99 meters; 117 inches 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm 4 0 3 m m 4 0 3 m m 4 0 3 m m 4 0 3 m m 4 0 3 m m m m 3 0 4 m m 3 0 4 m m 3 0 4 m m 3 0 4 m m 3 0 4 403 mm 403 mm 403 mm 403 mm 403 mm 403 mm Attention. The current options are valid only for rigid surfaces. Kino-mo LTD 2018. All rights reserved M01Db 17 Hypervsn Model M Operating Manual MODEL M OPERATION Attention. Sections 7.1-7.2 are designed for overview only (no action is required). Read them carefully and follow further instructions. The device has two operating modes which are selected on the switch at the LED ray base. Setup mode is used ONLY for setting up the device, Operating mode for daily operation. If you are using the device for the first time, please choose the Setup mode. 1. Setup mode (marked with a black dot). When turned on, the device displays Wi-
Fi Hotspot message and creates a wireless network in close proximity to the device. The network is named hypervsn-XXXXXXX, where XXXXXXX is a 7-digit number. The same serial number can be found on the base of the rotor. 2. Operating mode. This is the main operating mode. In this mode, the device can be connected to the Internet, be remotely controlled, and display user content. If there is no user content uploaded on the device, the device will display an animated Kino-mo intro. Setup Mode Operating Mode Picture 7. Switches Kino-mo LTD 2018. All rights reserved M01Db 18 Hypervsn Model M Operating Manual 7.2. Switching device ON and OFF It is prohibited to turn the device on when it is partly or fully disassembled, and, particularly, to switch on the stator separately from the rotor. Before pressing the On button make sure that the device remains at a safe distance. To switch on:
Put the switch at the base of the stator into the anticlockwise position. Plug the device in. The device will start working straight after that. To switch off:
To switch the device off, unplug the device. The device state can be determined on the basis of the activity of the three LEDs on the stator. Please read the LEDs activity description below carefully to understand different device states better. Kino-mo LTD 2018. All rights reserved M01Db 19 Hypervsn Model M Operating Manual Table 6. Stator LED blink pattern description LEDs ACTIVITY DESCRIPTION All LEDs are off The red LED is on The red LED is blinking The red and the green LEDs are blinking The device is not connected to the alternate current mains. The device is working in the Operating mode (showing content). The device is connected to the alternate current mains (but is not turned on). Device engine is not working. This might be due to fact that the Shunt component is removed or its contact integrity is disturbed. The device is connected to the alternate current mains without the rotor. Attention. It is forbidden to connect the device to the alternate current mains without the rotor. Technical issues. Please contact support@
kino-mo.com if you notice that the red and the green LED blink. The main function of the shunt component is to stop engine operation if the shunt contact integrity is interrupted. Example case: Reed switch is connected to the shunt contact as well as to the external protection (dome). If the dome integrity is interrupted, the device will shut down immediately. Kino-mo LTD 2018. All rights reserved M01Db 20 Hypervsn Model M Operating Manual The device requires activation for the first-time use. To do so, connect the device to an Internet-enabled Wi-Fi network. If the router is provided, please configure it in accordance with the instructions provided. Upon purchase, each customer receives a personal email invitation. Follow e-mail instructions in order to create your personal account. Its time to set your password!
The next step in setting up a new account is to choose a password. Youll need it to log in to your personal account. Were glad youre using Hypervsn management platform!
Set my password You may copy/paste this link into your browser:
http://platform.kino-mo.com/#/signup/........ Your sign in email is:
example@kino-mo.com 2017 Kino-mo LTD London The Light Bulb SW18 4GQ
+44 (0) 203-0363-627 www.kino-mo.com Picture 8. Personal email invitation The process of connecting the device to a wireless network is as follows:
1. Go to https://platform.kino-mo.com and enter your E-MAIL and PASSWORD from the previous step. Picture 9. Platform login screen Kino-mo LTD 2018. All rights reserved M01Db 21 Hypervsn Model M Operating Manual 2. Open My Company page https://platform.kino-mo.com/#/company and copy the information from the Company Name field, and save it for further actions. Picture 10. My Company page 3. After that go to My profile page. Copy the information from Nickname and E-mail fields and save it for further actions. Picture 11. My Profile page Kino-mo LTD 2018. All rights reserved M01Db 22 Hypervsn Model M Operating Manual 4. Turn the device off. Move the switch at the base of the rays to the Setup mode
(marked position). Picture 12. Switching device into the Hotspot mode 5. Turn the device on. 6. Messages WiFi Hotspot and ACTIVATE HYPERVSN will appear on the device. Picture 13. WIFI HOTSPOT service message that you should see in Setup mode message Kino-mo LTD 2018. All rights reserved M01Db 23 Hypervsn Model M Operating Manual Picture 14. ACTIVATE HYPERVSN service message that you should see in Setup mode 7. Turn on Wi-Fi on your laptop or any other device and the Wi-Fi network hypervsn-
XXXXXXX (where XXXXXXX is a 7-digit number) will appear in 1-2 minutes. Wi-Fi: On hypervsn-1700124 Picture 15. Connecting to the hotspot Kino-mo LTD 2018. All rights reserved M01Db 24 Hypervsn Model M Operating Manual 8. Connect to the hypervsn XXXXXXX Wi-Fi network and use the following password: 0c3a71dad2. WPA2 password. Password: 0c3a71dad2 Show password Picture 16. Password input 9. Type in 192.168.0.1:6747 in the browser to access the webpage with a form to fill in. Picture 17. Input this IP-address into your browser address bar Kino-mo LTD 2018. All rights reserved M01Db 25 Hypervsn Model M Operating Manual 10. The Screen calibration page should appear. Calibration mode ON 20 Apply User Data Company Name* Enter your company name Enter your nickname Networks settings Network 1 Network 1 name Enter the name of the network to which you would like to conne
(SSID)*
Network 2 Network 2 name Enter the name of the network to which you would like to conne
(SSID)*
Security WPA2-Personal Network 3 Network 3 name Enter the name of the network to which you would like to conne
(SSID)*
Security WPA2-Personal Save Picture 18. Screen calibration page 11. Calibrate the image horizontal orientation:
a) Switch the Calibration mode on. After that the device will display Kino-
mo image and its serial number. Picture 19. Kino-mo image and device serial number Kino-mo LTD 2018. All rights reserved M01Db 26 Hypervsn Model M Operating Manual b) Enter the correction angle and press Apply. The correction angle must vary from -170 to +170. A positive number rotates the image clockwise, while a negative number rotates it anticlockwise. ON Picture 20. Screen calibration Follow the instructions and fill in the required fields in the User Data section:
Company Name, Nickname and E-mail (use the information from steps 2 and 3 of this instruction). Attention. All fields are case sensitive. User Data Picture 21. User Data section Fill in the required fields in the Networks settings section in order to connect to the previously configured access point. Table 7. WI-FI network requirements (
- correct,
- incorrect) Kino-mo LTD 2018. All rights reserved M01Db 27 Hypervsn Model M Operating Manual 2. Distance to the router: up to 3 metres. 3m 5m 3. Wi-Fi frequency: 2.4 GHz. 2.4 GHz 5.0 GHz 4. Router network mode: B/G. Interface <wlan 1>
Interface <wlan 1>
General Wireless HT HT MCS WDS. .. General Wireless HT HT MCS WDS. . Mode: station Band: 2GHz-B/G Channel Width: 20MHz Frequency: 2412 MHz Mode: station Band: 2GHz-G/N Channel Width: 20MHz Frequency: 2412 MHz 5. General recommendations: choose a less congested Wi-Fi channel, avoid physical barriers between the router and the Device. Kino-mo LTD 2018. All rights reserved M01Db 28 Hypervsn Model M Operating Manual Hypervsn operation assumes using a personal router. We recommend to use 3G/4G routers. If you are experiencing problems with your home or office Wi-Fi network, try to share the Internet connection from your mobile phone by creating a Hotspot. Please note that your service provider may charge a fee for using the Hotspot. Important: the device supports up to 3 networks, so you may want to save a couple of them if you plan to move the device. Networks settings Network 1
(SSID)*
Picture 22. Networks settings After you complete the device configuration, click Save. The device will start booting animation. Picture 23. Booting animation If everything is connected properly, a success message will be displayed. If the device is not activated, a message ACTIVATE HYPERVSN will appear (see Step 6 of the current section). Kino-mo LTD 2018. All rights reserved M01Db 29 Hypervsn Model M Operating Manual Picture 24. Success activation message If the activation process goes wrong (Wi-Fi network is not available, etc.) you will see the following message on the device:
Picture 25. Incorrect data message Attention. After using the device, the stator and rotor can become hot to touch. Please wait until the temperature falls before proceeding with the next step. 12. Turn the device off. Move the switch on the rotor to the Operating Mode
(unmarked position). Picture 26. Switching the device to the Operating Mode Kino-mo LTD 2018. All rights reserved M01Db 30 Hypervsn Model M Operating Manual 13. Turn the device on. Kino-mo labels should appear on the display one by one. The messages disappear gradually and the screen turns black for 10 seconds. Kino-mo animated intro will appear 30 seconds after turning the device on. 14 .If the device is successfully connected to an Internet-enabled Wi-Fi network
(that you set up in Step 11 of this section), it is ready to be used and becomes available in your personal account at https://platform.kino-mo.com/#/devices. Detailed instructions on how to manage the device via your personal account are available on Hypervsn management platform. Picture 28. Hypervsn management platform tutorials Kino-mo LTD 2018. All rights reserved M01Db 31 Hypervsn Model M Operating Manual 15. Find the My Units tab on the main page and click on it. Picture 29. Platform main page 16. After that you will see the list of your devices including the one you just activated. You can also enter the device serial number in the search bar to see the required device below. Picture 30. List view tab Click on the activated device and select Edit information. Fill in the following fields in order to recognise your device in the future sessions:
1. Hypervsn name 3. Tags 2. Address 4. Description Kino-mo LTD 2018. All rights reserved M01Db 32 Hypervsn Model M Operating Manual Picture 31. Editing device info Attention. You need to enter the correct display address so that the device is located correctly. Click on the icon on the activated device and select Edit information. After all these steps you need to create a media campaign and download the content. To do this, use the Campaigns tutorial that can be found on the main page of Hypervsn management platform. Kino-mo LTD 2018. All rights reserved M01Db 33 Hypervsn Model M Operating Manual MAINTENANCE For technical maintenance, please unplug the power cord from the alternating current mains and make sure the rotating element has fully stopped. The device needs to undergo technical maintenance at least once a month with the following actions required:
a) Visual check of the power cord. The power cord should not have any cracks or cuts compromising its base isolation. If there are any faults of this kind, please stop using the device immediately until the faults are fixed or the device is replaced. b) Clean the LED rays from dust. Attention. Do not use a moist rag. Kino-mo LTD 2018. All rights reserved M01Db 34 Hypervsn Model M Operating Manual PROVISIONS The device must be installed so that the lower edge of the LED rays is at least 2.9 metres off the floor. Exceptions are allowed in case there is a natural barrier or similar preventing the public from approaching the device closer than by two metres. Additional safety requirements that have not been mentioned above yet are outlined below:
The device belongs to I class with regards to protection against electric injuries. It is forbidden to operate the device using alternating current mains without any grounding system. To avoid electric injuries, please do not turn the device on while the stator safety cover is removed. The power voltage must match the information on the device type label. Under no circumstances touch the device while it is rotating. The LED rays on the rotor become effectively invisible, which might pose danger. Since Kino-mo Display relates to TYPE A pluggable equipment it is necessary to have an easy-to-reach socket nearby. After using the device, the stator and rotor elements can become hot to touch. Please wait until the temperature falls before proceeding further. Do not throw any objects into the device. Do not use the device if the power cord is damaged. Make sure the cord is not in contact with any sharp edges or hot surfaces. Do not pull the power cord, do not rewind it and do not wind it around any part of the device. If the device produces any abnormal sounds during operation, please stop using the device immediately and contact the vendor. Do not let children play with the device and do not leave them unattended in close proximity to an operating device. Kino-mo LTD 2018. All rights reserved M01Db 35 Hypervsn Model M Operating Manual When the device is already attached to the wall, please keep the device power cord as far from the rotating element (rotor) as possible. You can also use wiring duct the colour of which matches the colour of the mounting surface. Hypervsn model M device requires an attention-label near by. Please download the label from the following page: https://kino-mo.com/wp-content/uploads/
WARNING_Sticker_device.pdf Attach the label in a close proximity to the device. We recommend to place it above the device. We disclaim all responsibility for any injuries or device malfunction if the current requirement is not met. Kino-mo LTD 2018. All rights reserved M01Db 36 Hypervsn Model M Operating Manual Hypervsn Model M packaging is environmentally friendly and reusable. All plastic parts contain special labels, e.g. >PE< for polyethylene, >PS< for polystyrene. The sign on the device or its package means that the device cannot be disposed of as domestic waste. Instead, please pass it to an electric equipment recycling center for proper disposal. By adhering to disposal regulations, one can prevent causing potential damage to the environment resulting from mishandling this type of waste disposal. Kino-mo LTD 2018. All rights reserved M01Db 37 Hypervsn Model M Operating Manual AND MAINTENANCE 11.1. Warranty The device warranty life is 12 months. The average operation time is 5 years. If the guarantee label is broken on the rotor or stator, the device warranty will be considered voided. If the device needs to be repaired or if spare parts need to be purchased, please contact your vendor. Hypervsn Model M complies with ISEDs license-exempt RSSs. The device operation is subject to the following conditions:
1. It may not cause harmful interference, and 2. it may accept any interference, including interference that may cause undesired operation of the device. This device complies with the FCC radiation exposure limits for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 2 cm between user and/or bystanders and this device. Hypervsn Model M complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Kino-mo LTD 2018. All rights reserved M01Db 38 Hypervsn Model M Operating Manual NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. No changes shall be made to Hypervsn Model M without the manufacturers permission as it may void the users authority to operate the device. Kino-mo LTD 2018. All rights reserved M01Db 39 Revolution in Every Dimension HEADQUARTERS Kino-mo Ltd | London The Light Bulb | SW18 4GQ T: +44 (0) 208 0685 328 E: info@kino-mo.com