IMPORTANT SAFETY INSTRUCTIONS Please read and understand all safety instructions before use.
* Read these instructions. Keep these instructions. Heed all warnings. Do not use this apparatus near water.
* Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
* Do not push objects into apparatus vents or slots because fire or electric shock hazards could result. Maintain a minimum distance of at least 6 inches around apparatus for sufficient ventilation
* Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloth, curtains, etc.
# No naked (open) flame sources, such as lighted candles, should be placed on or near apparatus. Place apparatus in a stable location so it will not fall causing product damage or bodily harm.
# Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized plug. A polarized plug has tow blades with one wider than the other. The wide blac is provided for your safety. If the provided plug doas not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Operate the apparatus only from the low level audic line output jack of the computer or of an audio device. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
# Only use attachments/ accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The apparatus shall be disconnected from the mains by placing the power/standby switch in the standby position and unplugging the power cord of the apparatus from the AC mains receptacle. The socket-outlet shall be installed near the equipment and shall be easily accessible. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE 1D ir ane RAIN OR MOISTURE. DONDTOPEN e CAUTION PILOT LAMP SOLDERED IN PLACE. TO REDUCE THE RISK OF ELECTRIC SHOCK, REFER TO REMOVE COVER OR BACK CAUTION:TO REDUCE THE RISK OF ELEOTRIG SHOCK. AAU IED SERVICE Fi bas DONO ENVIRONMIENTAL PROTECTION RECOMMENDATION NO USERSERVIGEABLE PARTS INSIDE At the end of fis workdng [fens product should not ba dlgposed of wih standard REFER SEVIS Te GALIED SENICE PERS EL 6 howschold Wits, but niher cropped off ata collecon porn fer the clepoeal of Waste Elactical and Electronic recycling. Wy Ths bs confirmed by the symbol found on uct, Leer manual or packaging. The exclamation point within an equilateral triangle is The lighting flash with arrowhead symbol with an equilateral triangle Intended to alert the user ta the presence of Important Is Intended to alert the user to the presence of uninsulated operating and maintenance (servicing) instructions in dangerous voltage within the products enclosure thet may be of the IIterature accompamang the appliance, sufficient magnitude to constitute a risk of electric shock to persons. 3.Pairing with the computer 1.Pairing with the computer without Bluetooth transmitting device 1.1 Plug the USB device with Bluetooth transmitting function into the computer. 1.2 Open the USB Bluetooth-enabled device software to search the Bluetcoth-
enabled device( please refer to the user guide of the USB Bluetooth-enabled device for detailed operation ) 1.3 Power on the speaker and enter into the pairing station { please refer to the user guide of the pairing description 3-6 part between the speaker and the handset for detailedinformation ) 2.Pairing with the computer with Bluetooth transmitting device 2.1 Start the Bluetooth software on your computer( please make sure the Bluetooth software was installed on your computer ), then make the USB Bluetooth-enabled device enter into searching pairing station. 2.2 Power on the speaker and enter into the pairing station { please refer to the user guide of the pairing description 3-6 part between the speaker and the handset for detailed information } . IMPORTANCE: if the pairing can not be completed within 90 seconds, the blue and red indicator will stop flickering and the Bluetooth will be disconnected automatically. Pleaserepeat the pairing procedure to pair the speaker system with your computer . Specification Total Output Power: 18W Power Use: AC12V 2A Response Frequency: 50Hz~20 KHz Input Sensitivity Maximum: 700mV Satellite Speaker :1.5"8Q 4W Magnetically Shielded speaker Woofer:3"80 10W Magnetically Shielded speaker Speaker Size: L220xW125xD100mm This equipment has been tested and found to comply with the limits for a class 6 digital device, pursuant to part 15 of the FCG Rules_ These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radiosT technician for help_ Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Info To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter 6