FCC ID: 2A33Z-N808 Kiwi Tablet 1

KIWI TABLET PC Safety, Warranty & Quick Start Guide Model Number: N808 Read this guide carefully before using your device. Reading before using your tablet Reading first - regulatory information 1 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2 Device overview Product name KIWI Tablet 1 Model N808 3 Using your device for the first time Charging the tablet You might need to charge the battery before using your device. Insert the DC plug of the power adaptor into the DC port of the tablet pc and plug in the power adaptor to a wall outlet. Below are battery icons showing different status of the battery. Low battery Fully charged Charging Turning on/off Turn on: Press and hold the Power button until the Android boot on window appears. Turn off: Press and hold the Power button for a few seconds, then tap Power off. Restart: Press and hold the Power button for about 10 seconds to restart. 4 Important safety and handling information Built-in rechargeable battery notice This device contains a Lithium-Ion Battery. Caution: The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, do not heat above 60 degrees C (140 F), do not crush or puncture the battery, or short external contacts or incinerate. See more information on the Quick Start Guide. Tips for proper care of your tablet battery include:

Dont overcharge. Avoid using the tablet when its plugged in. Store your device at the correct (cool) temperature. Dont let the battery get all the way to 0% before recharging. Never use an unauthorized charger. Avoid physical stress to your tablet. Turn off your device when charging. Caution about high volume usage Warning: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the sound, the less time is required before your hearing could be affected. To protect your hearing:

Limit the amount of time you use headsets or headphones at high volume. Avoid turning up the volume to block out noisy surroundings. Turn the volume down if you cant hear people speaking near you. If you experience hearing discomfort, including the sensation of pressure or fullness in your ears, ringing in your ears or muffled speech, you should stop listening to the device through your headset or headphones and have your hearing checked. To prevent possible hearing damage, do not listen at high volume levels for long periods. 5 Environmental, recycling, and disposal information Important battery and WEEE information Batteries and electrical and electronic equipment marked with the symbol of a crossed-out wheeled bin may not be disposed as unsorted municipal waste. Batteries and waste of electrical and electronic equipment (WEEE) shall be treated separately using the collection framework available to customers for the return, recycling, and treatment of batteries and WEEE. When possible, remove and isolate batteries from WEEE prior to placing WEEE in the waste collection stream. Batteries are to be collected separately using the framework available for the return, recycling, and treatment of batteries and accumulators. FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(2) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for Compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction 6

Power Input: 5V =z:

FCC ID: 2A33Z-N808 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Made in China KIWI TABLET 1 Model: N808 Tou oT AULA OL 0 OE Ob 0S 09 OZ 08 06 QQ 01 a yA

Kiwichat inc Agent Authorization Company: Kiwichat inc Address: 355 NE 59th Terrace, Miami, FL, 33137, USA. Product Name: Kiwi Tablet 1 Model Number(s): N808 Product Description:

Tablet PC We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Jan.14,2022 Name:

Melvin Gerena Title:

VP Hardware Company: Kiwichat inc

Kiwichat inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:

2A33Z-N808 Date: January 20, 2022 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Melvin Gerena Title: VP Hardware

Kiwichat inc FCC Software Configuration Control Declaration Date: January 14, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number:

Regarding FCC Country Code Selection guidelines identified in KDB 594280. Kiwi Tablet 1 / N808 All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Melvin Gerena Title: VP Hardware Signature of applicant Date: Jan.14,2022 FCC Software Configuration Control Declaration Rev1.1