Know the Social Distance Alarm K18 K28 K58(S) K59 How it works 1. Touch the buon for 3 seconds, the blue LED quick ash and device power on 2. The blue LED will slow ash to indicat the device is in working mode 3. In default, the product will make vibraon/red LED to alert when other device comes too close 4. If you don't need to use it, long touch the buon for 8 seconds to power o Baery state: the blue LED will ash very 3~5 seconds when its in working mode. If the blue LED stop ashing, the product is in sleep mode. Please recharge the product, or replace the baery. Note: You can use App for more features. For the models without buon, please follow the below steps to acvate the alert funcon Use the App to achieve more features Connect to App STEP 1:
STEP 2:
STEP 3:
Scan the QR code to download in App Store or in Google Play. Turn on Bluetooth. Make sure your phone Bluetooth is on. Place the tag close to the phone. STEP 4:
STEP 5:
Tap on scan icon on the top right corner. Then click the device shown in the list. Come to product detail page and achieve more features.
*For models without buton only Click the ACTIVATE to turn on the alert funcon. Features ID Seng Group ID: You can set the range from 0~65535, Users in the same Group will not trigger the alarm when they are close with each other. Serial ID: Dene dierent members in the same Group. Alarm Type You can select the alert way as you need. Alarm Distance Sleep Time Select the distance to meet dierent scenarios. The device will vibraon or sound alaert if distance with other device is less than selected. Select the no-disturb period. The device will not alert during this period. Nearby History View the history for when and who doesnt respect the security distance. Note: When you are connecng the App, the distancing alert feature is disable. Please make sure you quit the App aer you make the seng. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modicaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.