FCC ID: 2AI28-AEPJS3A Bluetooth Speaker with Magnet and Hook

ENGLISH ESPAOL FRANAIS Klein Tools AEPJS3A is a powered speaker designed to provide high-

quality sound for smart phones, tablets, computers, or other audio devices. The AEPJS3A will also charge common mobile devices like cell phones, tablets, headphones, and other smaller USB devices. CONTENTS AEPJS3A Bluetooth Speaker 39.4" (1000mm) USB-A to USB-C Cable 23.6" (600mm) 1/8" (3.5 mm) Auxiliary Cable Instruction Sheet GENERAL SPECIFICATIONS Dimensions: 5.46" 5.39" 2.34" (139 137 59 mm) Weight: 1.4 lb. (635g) Bluetooth Version: 4.2 Bluetooth Connection Range: 100 ft. (30 m) in open space Support Profiles: AD2P, AVRCP, HFP, SPP Battery Type: Internal, Li-Ion, 3.63V / 5200mAh (18.88Wh) Battery Life: 20+ hours at 70% volume Daisy-Chain Range: 30' (9 m) in open space Operating/Charging Temperature: 32 to 104F (0 to 40C) Storage Temperature: -22 to 140F (-30 to 60C) Relative Humidity: <85% non-condensing Drop Protection: 6.6' (2 m) Ingress Protection (IP) Rating: IP54 Certifications: CE, UKCA, FCC, IC, DOE/CEC, NRCAN, NOM Specifications subject to change. WARNINGS Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in risk of fire or electric shock. Keep these instructions for future reference. DO NOT use the product if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or injury. Risk of fire and burns. DO NOT open, crush, heat above specified maximum temperature or incinerate. Prolonged exposure to direct sunlight can result in elevated temperatures. DO NOT immerse in water or other liquids. Properly seal the charging port cover to achieve specified water & foreign object ingress protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in risk of fire or electric shock. DO NOT open the charging port cover if wet or in a wet environment. Thoroughly dry the unit and the seal around water-resistant cover completely before opening water resistant cover. DO NOT subject to impacts or drops greater than 6.6' (2 m). Drops larger than this may not show signs of damage, but internal components may have been compromised. It is advisable to replace the unit if any such severe events occur. DO NOT attempt to repair the product or charging cable. There are no user-serviceable parts. SYMBOLS ON PRODUCT Warning or Caution Strong Magnetic Field Risk of Electrical Shock Read Manual Conforms with particular Code of Federal regulations Energy Efficiency Verified This product has been independently tested by Intertek and meets applicable published standards NOM-NYCE IFETEL Conformit Europenne: Conforms with European Economic Area directives UKCA - United Kingdom Conformity Assessment Do not place equipment and its accessories in the trash FEATURE DETAILS (FIG.A) 1 Power Button 10 Battery Status Indicator 2 Skip Backward Button 11 Broadcast LED Indicator 3 Play/Pause/Talk Button 12 Nail Hook 4 Skip Forward Button 13 Magnets (2) 5 Broadcast Button 14 Auxiliary Aux In Jack 6 - Volume Down Button 15 USB-A Charge Out Port 7 + Volume Up Button 16 USB-C Charge In/Out Port 8 Voice Control Button 17 Water/Dust-Resistant Cover 9 Bluetooth LED Indicator OPERATING INSTRUCTIONS CHARGING BATTERY NOTE: Fully charge speaker before use. First-time charge should be at least 4 hours. Connect the USB Type C cable connection to USB-Charging port 16 ;

plug the other end of cable to computer or USB-AC adapter or other USB power supply (not included). Charge times will vary: 5V-2.4A Charger

- Approx. 3 Hours, 5V-1.0A Charger: Approx. 5 Hours. The battery level indicator will illuminate to indicate charging status (see table below). CHARGING STATUS LED INDICATORS Not Illuminated LED Solid Yellow Solid Green Status Cascading Green Cascading Green Cascading Yellow Cascading Red Cascading Green Cascading Green Cascading Yellow Solid Red Cascading Green Cascading Green Solid Yellow Solid Red Blinking Green Solid Green Solid Yellow Solid Red Solid Green Solid Green Solid Yellow Solid red Solid Red

% Charged Blinking Cascading 0% to 24% charged 25% to 49% charged 50% to 74% charged 75% to 99% charged 100% charged ON/OFF: Press & hold power button 1 for 3 seconds, a tone will sound. Unit will automatically power off after 20 minutes of inactivity. NOTE: Turn unit off when not in use to prolong battery life. PAIRING: Wireless connection activates automatically and is ready to pair when unit is turned on. On your Bluetooth wireless compatible device, enable Bluetooth and search/scan for devices that can be paired. Select AEPJS3A when it appears (refer to the user manual of your device). If necessary, enter 0000 as pairing passcode. A tone sounds after a successful pairing. NOTE: Unit automatically attempts to connect the last paired wireless device but is ready to pair with any compatible device if the last paired device is not detected within 5 seconds of powering on. DISCONNECT CURRENT PAIRING:

1. Turn unit off, -OR-

2. Single-press Power Button 1 . Bluetooth LED Indicator 9 will blink, -OR-

3. Plug a cable into AUX jack 14 , -OR-

4. Turn off Bluetooth wireless connection in paired device. PAIRING DIFFERENT DEVICES:

1. Single-press Power Button 1 (tone sounds twice) to re-enter pairing mode. 2. Follow instructions in PAIRING section to pair with a different device. RESET WIRELESS CONNECTION:

1. Double-press Power Button 1 (tone sounds once) to to clear the Bluetooth pairing list. 2. Follow instructions in PAIRING section to pair with new devices (a new pairing list will be created). AEPJS3A-1390371ART.indd 1 El AEPJS3A de Klein Tools es un altavoz elctrico diseado para proporcionar sonido de alta calidad a telfonos inteligentes, tabletas, computadoras y otros dispositivos de audio. El AEPJS3A tambin carga dispositivos mviles comunes como telfonos celulares, tabletas, auriculares y otros dispositivos USB pequeos. LarticleAEPJS3A de KleinTools est un haut-parleur amplifi offrant un son de qualit suprieure et qui peut se connecter aux tlphones intelligents, aux tablettes, aux ordinateurs et dautres appareils audio. Il peut aussi servir recharger la plupart des tlphones mobiles, tablettes, couteurs et autres petits appareils USB. CONTENIDO Altavoz Bluetooth AEPJS3A 39.4" (1 000 mm) USB-A to USB-C Cable Cable auxiliar de 23,6" (600 mm), 1/8" (3,5mm) Hoja de instrucciones ESPECIFICACIONES GENERALES Dimensiones: 5,46" 5,39" 2,34" (139 137 59 mm) Peso: 1,4lb (635g) Bluetooth versin: 4.2 Rango de conexin Bluetooth: 100' (30m) al aire libre Compatible con perfiles: AD2P, AVRCP, HFP y SPP Tipo de batera: interna de iones de litio de 3,63V/5200mAh (18,88Wh) Vida til de la batera: ms de 20horas a un volumen del 70%

Rango para conexin en cadena: 30' (9m) al aire libre Certificaciones: CE, FCC, IC, BC y NOM Temperatura de funcionamiento/carga: 32 a 104F (0 a 40C) Temperatura de almacenamiento: -22 a 140F (-30 a 60C) Humedad relativa: <85%, sin condensacin Proteccin ante cadas: 6,6' (2m) Grado de proteccin IP: IP54 Certificaciones: CE, UKCA, FCC, IC, DOE/CEC, NRCAN, NOM Especificaciones sujetas a cambios. ADVERTENCIAS Lea, comprenda y siga estas instrucciones para garantizar un funcionamiento seguro. El incumplimiento de estas advertencias puede provocar riesgo de incendio o choque elctrico. Conserve estas instrucciones para consultarlas en el futuro. NO use el producto si est daado o ha sido modificado. Las bateras daadas o modificadas pueden presentar comportamientos impredecibles que pueden provocar incendios, explosiones o lesiones. Riesgo de incendio y quemaduras. No lo abra, aplaste, caliente a ms de la temperatura mxima especificada, ni lo incinere. La exposicin prolongada a la luz solar directa puede provocar temperaturas elevadas. NO lo sumerja en agua u otros lquidos. Selle correctamente la cubierta del puerto de carga para lograr la proteccin especificada contra el ingreso de agua y objetos extraos. Procure que el sello no contenga suciedad, aceite, arena u otros materiales que afecten un sellado adecuado. De lo contrario, puede provocar riesgo de incendio o choque elctrico. NO abra la cubierta del puerto de carga si est hmeda o si est en un ambiente hmedo. Seque cuidadosamente la unidad y el sello alrededor de la cubierta resistente al agua antes de abrir la cubierta resistente al agua. NO lo someta a impactos ni cadas mayores de 6.6' (2 m). Es posible que cadas mayores a esto no muestren seales de dao, pero los componentes internos podran estar comprometidos. Se recomienda reemplazar la unidad si sufre alguno de estos eventos de gravedad. NO intente reparar el producto ni el cable de carga. No contiene piezas que el usuario pueda reparar. SMBOLOS DEL PRODUCTO Advertencia o precaucin Fuerte campo magntico Riesgo de choque elctrico Lea el manual Cumple con un cdigo de regulaciones federales en particular Verificacin de eficiencia energtica Este producto ha sido probado de manera independiente porIntertek y cumple con las normas publicadas vigentes NOM-NYCE IFETEL Conformit Europenne: cumple con las normas del Espacio Econmico Europeo UKCA - Conformidad evaluada por el Reino Unido No arroje el equipo ni sus accesorios a la basura DETALLES DE LAS CARACTERSTICAS (FIG. A) 1 2 3 4 5 6 7 8 9 Botn de encendido Botn para saltar atrs Botn para reproducir/pausar/hablar Botn para saltar adelante Broadcast Button Botn para disminuir el volumen -

Botn para aumentar el volumen +

Botn de control por voz Indicador LED Bluetooth 10 11 12 13 14 15 16 17 Indicador de estado de la batera Broadcast LED Indicator Gancho de fijacin Imanes (2) Conector auxiliar AUX IN

(Entradaauxiliar) Puerto de carga de salida USB-A Puerto de carga de entrada/salida USB-C Cubierta resistente al agua/polvo MANTENIMIENTO LIMPIEZA: asegrese de que el altavoz est apagado y lmpielo con un pao limpio, seco, que no deje pelusas. No utilice solventes ni limpiadores abrasivos. ALMACENAMIENTO: si el altavoz no se utilizar por un tiempo prolongado, crguelo antes de guardarlo y vuelva a cargarlo peridicamente durante el perodo de almacenamiento para preservar la capacidad de carga de la batera. INSTRUCCIONES DE FUNCIONAMIENTO CARGAR LA BATERA NOTA: Cargue el altavoz completamente antes de usarlo. La primera carga debe ser de al menos 4horas. Conecte el cable USB tipo C al puerto de carga USB 16 ; conecte el otro extremo del cable a una computadora, a un adaptador de USB a CA, o a otra fuente de alimentacin USB (no incluida). Los tiempos de carga variarn: Cargador 5V-2.4A

- Aprox. 3 horas, cargador 5V-1.0A: Aprox. 5 horas. El indicador del nivel de batera se encender para indicar el estado de carga (consulte la tabla a continuacin). INDICADORES LED DE ESTADO DE CARGA Apagado LED Amarillo fijo Verde fijo Estado Verde ascendente Verde ascendente Amarillo ascendente Rojo ascendente Verde ascendente Verde ascendente Amarillo ascendente Rojo fijo Verde ascendente Verde ascendente Amarillo fijo Rojo fijo Verde intermitente Verde fijo Amarillo fijo Rojo fijo Verde fijo Verde fijo Amarillo fijo Rojo fijo Rojo fijo Porcentaje de carga Intermitente Ascendente 0% al 24% de carga 25% al 49% de carga 50% al 74% de carga 75% al 99% de carga 100% de carga ENCENDIDO/APAGADO: mantenga presionado el botn de encendido 1 durante 3segundos hasta or un tono. La unidad se apagar automticamente despus de 20minutos de inactividad. NOTA: apague la unidad cuando no la use para prolongar la vida til de la batera. CONEXIN: la conexin inalmbrica se activa automticamente y est lista para conectarse cuando la unidad se enciende. Active el Bluetooth en su dispositivo con compatibilidad inalmbrica Bluetooth y busque/escanee dispositivos que puedan conectarse. Seleccione AEPJS3A cuando aparezca (consulte el manual delusuario de su dispositivo). Si es necesario, escriba 0000 como cdigo de acceso a la conexin. Sonar un tono cuando se logre la conexin. NOTA: la unidad intenta conectarse automticamente al ltimo dispositivo inalmbrico conectado, pero est lista para conectarse a cualquier dispositivo compatible si el ltimo dispositivo conectado no se detecta transcurridos 5segundos del encendido. DISCONNECT CURRENT PAIRING:

1. Turn unit off, -OR-

2. Single-press Power Button 1 . Bluetooth LED Indicator 9 will blink, -OR-

3. Plug a cable into AUX jack 14 , -OR-

4. Turn off Bluetooth wireless connection in paired device. PAIRING DIFFERENT DEVICES:

1. Single-press Power Button 1 (tone sounds twice) to re-enter pairing mode. 2. Follow instructions in PAIRING section to pair with a different device. RESET WIRELESS CONNECTION:

1. Double-press Power Button 1 (tone sounds once) to to clear the Bluetooth pairing list. 2. Follow instructions in PAIRING section to pair with new devices (a new pairing list will be created). CONTENU Haut-parleur Bluetooth AEPJS3A Cble USB-A vers USB-C de 1 000 mm (39,4po) Cble auxiliaire 3,5mm (1/8po) de 600mm (23,6po) Feuillet dinstructions CARACTRISTIQUES GNRALES Dimensions: 139x137x59mm (5,46x5,39x2,34po) Poids: 635g (1,4lb) Versionde Bluetooth : 4.2 Porte de connexion Bluetooth: 30m (100pi) en espace dgag Profils pris en charge: AD2P, AVRCP, HFP et SPP Type de batterie: interne, lithium-ion, 3,63V/5200mAh (18,88Wh) Autonomie de la batterie: plus de 20h un volume de 70%

Porte de la connexion en srie: 9m (30pi) en espace dgag Temprature de fonctionnement et de recharge: 0C 40C (32F 104F) Temprature dentreposage: -30C 60C (-22F 140F) Humidit relative: <85% sans condensation Protection contre les chutes: 2m (6,6pi) Cote de protection contre les infiltrations: IP54 Certifications: CE, UKCA, FCC, IC, DOE/CEC, NRCAN, NOM Les caractristiques techniques peuvent faire lobjet de modifications. AVERTISSEMENTS Veuillez lire, comprendre et suivre ces instructions afin de garantir une utilisation scuritaire. Le non-respect de ces avertissements peut causer unrisque dincendie ou de choc lectrique. Conservez ces instructions des fins de rfrence. NUTILISEZ PAS le produit sil est endommag ou modifi. Des batteries endommages ou modifies risquent de produire des effets imprvisibles et de causer des incendies, des explosions ou des blessures. Risque dincendie et de brlures. NOUVREZ PAS ce produit, ne lcrasez pas, ne le chauffez pas plus de la temprature maximale indique et ne le brlez pas. Une exposition prolonge la lumire directe du soleil peut entraner des tempratures leves. NIMMERGEZ PAS ce produit dans leau ni dans tout autre liquide. Scellez adquatement le couvercle du port de recharge pour garantir la protection prvue contre les infiltrations deau et de corps trangers. Retirez du joint les salets, lhuile, le sable ou tout autre matriau qui pourrait nuire ltanchit du couvercle. Autrement, il pourrait y avoir un risque dincendie ou de choc lectrique. NOUVREZ PAS le couvercle du port de recharge sil est mouill ou si vous vous trouvez dans un environnement humide. Laissez scher compltement lappareil ainsi que le joint entourant le couvercle tanche avant douvrir ce dernier. NEXPOSEZ PAS lappareil des chocs ni des chutes de plus de 2m

(6.6pi). Aprs une telle chute, le botier pourrait sembler intact mme si les composants internes sont endommags. Il est recommand de remplacer lappareil sil est soumis de telles conditions. NE TENTEZ PAS de rparer le produit ni le cble de recharge. Ils ne contiennent aucune pice rparable par lutilisateur. SYMBOLES SUR LE PRODUIT Avertissement ou mise en garde Champ magntique puissant Risque de choc lectrique Lire le manuel Conforme la rglementation particulire du Code ofFederalRegulations Vrification de lefficacit nergtique Ce produit a t test de manire indpendante par Intertek etrpond aux exigences des normes applicables NOM-NYCE IFETEL Conformit europenne: Conforme aux directives de lEspace conomique europen UKCA valuation de la conformit du Royaume-Uni Ne mettez pas lappareil et ses accessoires au rebut CARACTRISTIQUES DTAILLES (FIG.A) 1 2 3 4 5 6 7 8 9 Bouton de mise sous tension Bouton de saut vers larrire Bouton de lecture/pause/microphone Bouton de saut vers lavant Broadcast Button Bouton de rduction du volume (-) Bouton daugmentation du volume (+) Bouton de commande vocale Voyant DEL Bluetooth 10 11 12 13 14 15 16 17 Indicateur dtat de la batterie Broadcast LED Indicator Crochet clou Aimants (x2) Prise auxiliaire (AUX IN) Port de sortie USB-A Port dentre et de sortieUSB-C Couvercle tanche et rsistant la poussire ENTRETIEN NETTOYAGE: Assurez-vous dteindre le haut-parleur, puis essuyez-le laide dun linge non pelucheux propre. Nutilisez pas de nettoyant abrasif ni de solvant. ENTREPOSAGE: Si le haut-parleur doit rester inutilis pendant une longue priode, rechargez-le avant de lentreposer. Rechargez-le ensuite rgulirement afin de maintenir la capacit de charge de la batterie. INSTRUCTIONS DUTILISATION RECHARGE DE LA BATTERIE REMARQUE: Rechargez compltement la batterie du haut-parleur avant son utilisation. Lapremire charge prend un minimum de 4heures. Connectez le cble USB de typeC au port de recharge USB 16 , puis branchez lautre extrmit du cble un ordinateur, un adaptateur secteur USB ou tout autre bloc dalimentation USB (non compris). Les temps de charge varient:

Chargeur 5V-2,4A - Env. 3 heures, chargeur 5V-1.0A: env. 5 heures. Lindicateur de charge de la batterie sallume pour indiquer ltat de la recharge (voir le tableau ci-dessous). VOYANTS DEL DTAT DE LA RECHARGE Voyant non allum Jaune continu Vert continu Rouge continu DEL

% de charge Clignotant En cascade tat En cascade verte En cascade verte En cascade jaune En cascade rouge En cascade verte En cascade verte En cascade jaune Rouge continu En cascade verte En cascade verte Jaune continu Rouge continu Vert clignotant Vert continu Jaune continu Rouge continu Vert continu Vert continu Jaune continu Rouge continu 0 24% de charge 25 49% de charge 50 74% de charge 75 99% de charge 100% de charge MARCHE/ARRT: Appuyez sur le bouton de mise sous tension 1 et maintenez-

le enfonc pendant 3secondes, jusqu ce quun signal sonore retentisse. Lappareil steint automatiquement aprs 20minutes dinactivit. REMARQUE: teignez lappareil lorsque vous ne lutilisez pas afin de prolonger la dure de vie de la batterie. JUMELAGE: La fonction de connexion sans fil sactive automatiquement et le jumelage est possible ds que lunit est mise sous tension. Sur votre appareil Bluetooth, activez la fonction Bluetooth et recherchez les appareils pouvant tre jumels. Slectionnez AEPJS3A lorsquil apparat (se reporter au manuel dutilisation de lappareil). Au besoin, entrez 0000 comme mot de passe de jumelage. Un signal sonore retentit lorsque le jumelage est russi. REMARQUE: Lunit tente automatiquement de se connecter au dernier appareil sans fil jumel. Sil nest pas dtect dans un dlai de 5secondes aprs la mise sous tension de lunit, elle pourra tre jumele nimporte quel appareil compatible. DISCONNECT CURRENT PAIRING:

1. Turn unit off, -OR-

2. Single-press Power Button 1 . Bluetooth LED Indicator 9 will blink, -OR-

3. Plug a cable into AUX jack 14 , -OR-

4. Turn off Bluetooth wireless connection in paired device. PAIRING DIFFERENT DEVICES:

1. Single-press Power Button 1 (tone sounds twice) to re-enter pairing mode. 2. Follow instructions in PAIRING section to pair with a different device. RESET WIRELESS CONNECTION:

1. Double-press Power Button 1 (tone sounds once) to to clear the Bluetooth pairing list. 2. Follow instructions in PAIRING section to pair with new devices (a new pairing list will be created). AEPJS3A Bluetooth Speaker with Magnet and Hook Instructions Altavoz Bluetooth con imn y gancho Instrucciones Haut-parleur Bluetooth avec aimants et crochet Instructions FIG. A TOP / VISTA SUPERIOR / DESSUS 9 1 2 3 4 5 11 10 6 7 8 SIDE / VISTA LATERAL / CT 15 14 16 17 BACK / VISTA POSTERIOR / ARRIRE 12 13 13 BOTTOM / VISTA INFERIOR / DESSOUS The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Klein Tools, Inc. is under license. La marca denominativa Bluetooth y los logotipos son marcas registradas de Bluetooth SIG, Inc. ycualquier uso de esas marcas por Klein Tools, Inc. se har bajo licencia.

*Le nom Bluetooth et les logos qui y sont associs sont des marques dposes de Bluetooth SIG, Inc. Elles sont utilises par Klein Tools, Inc. sous licence. CUSTOMER SERVICE SERVICIO AL CLIENTE SERVICE LA CLIENTLE KLEIN TOOLS, INC. 450 Bond Street, Lincolnshire, IL 60069 1-800-553-4676 customerservice@kleintools.com www.kleintools.com 1390371 Rev 08/22 F 4/25/2023 2:30:02 PM 4/25/2023 2:30:02 PM ENGLISH ESPAOL FRANAIS OPERATING INSTRUCTIONS INSTRUCCIONES DE FUNCIONAMIENTO INSTRUCTIONS DUTILISATION PLAYING AUDIO: Use your device to control the speaker or use the built-in control buttons on the speaker. Press the Play/Pause/Talk button 3 to play or pause audio on your device. Press the - 6 or + 7 button to adjust the speaker volume. A tone will sound when maximum volume is reached. Volume may also be controlled from your audio device. Press the Skip Forward 4 or Skip Backward 2 buttons to skip backward or forward (respectively) during a song. AUXILIARY AUDIO-IN: Connect one end of the auxiliary cable to the AUX jack 14 of the speaker; plug the other end of cable to line-out or headphone jack of your device. SPEAKERPHONE OPERATION:

When an incoming call occurs, playing music is muted & ring tone sounds. Short-

press Play/Pause/Talk 3 button to answer the call, or long-press to ignore. To disconnect the call, short press the Play/Pause/Talk button 3 to hang up. BROADCAST: Once you have successfully connected your AEPJS3A speaker to a Bluetooth device, you can connect up to four* more AEPJS3A speakers to your already connected AEPJS3A speaker. 1.Ensure your primary AEPJS3A speaker is turned on, this will be your Source speaker. 2.Press the Broadcast button 5 once or until SOURCE is heard. LED will turn solid white. 3.The Source speaker will broadcast a signal for three minutes, then time out. To reset the timer, press and hold the Broadcast button 5 for three seconds. 4.Power on any additional AEPJS3A speakers (up to four*) and press the Broadcast button 5 twice or until SYNCING is heard. LED will flash green. 5.Position the Syncing speakers near the Source speaker. Allow up to ten seconds for the speakers to link with each other. Upon successful connection, the synced speakers LEDs will turn solid green and SYNCED will be heard. NOTE:

1. When cycling through the Broadcast menu, three different modes will be heard, "Solo", "Source" and "Syncing" each are described below:

"SOLO": Standalone mode, speaker is not in Broadcast mode.

"SOURCE": Is the primary speaker to which secondary speakers link.

"SYNCING": Secondary or satellite speakers to which connects to the primary speaker. 2. The maximum range between speakers is 30' (10m) 3. The broadcast connection between all speakers will NOT automatically reconnect after the speaker are turned off. To reconnect, follow the Broadcast steps above.

*Up to seven additional speakers can be connected, but for optimal performance link no more than four speakers. VOICE CONTROL: Press the voice control button 8 to activate the voice assistant on your device. NOTE: Before using this function, the devices must be connected to the speaker via Bluetooth . LOW BATTERY INDICATION: The Red LED on the Battery Status Indicator 10 will flash on/off when battery level drops to approximately 5%. Speaker will automatically power off when the battery level is below 2%. Recharge speaker as soon as possible. POSITIONING SPEAKER:

Make sure that front of speaker is not obstructed. Stand speaker upright on a flat, level, stable surface. Attach speaker to a metal surface via the magnets 13 on the back of the unit. DO NOT mount to electrical equipment. Hang from a nail (or like item) by opening the Nail Hook 12 and placing the Nail Hook over the head of the nail. CHARGING DEVICES:

NOTE: For best results, use cable provided with your device. 1. Connect the cable to your device. 2. Connect the charging cable to the USB A Charge Out Port 15 or USB C Charge In/Out Port 16. Your device will automatically begin charging. The device being charged should provide indication that charging has begun. 1. Press and hold the Power button 1 for 3 seconds to turn on the speaker; your device will begin charging. 2. Press and hold the Power button 1 again for 3 seconds and all functions will power off; your device will stop charging. 3. When AEPJS3A is in Charge-Out-Only mode, it will automatically shut down once charging is complete and current is no longer being drawn by the device. Repeat these steps to charge another device. COMPLIANCE FCC COMPLIANCE This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC RF EXPOSURE STATEMENTS:

This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body or nearby persons. IC NOTICE TO CANADIAN USERS This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003. IC RADIATION EXPOSURE STATEMENT:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body. IFETEL REPORT For use in Mexico, the operation of this equipment is subject to the following two conditions: (1) This equipment or device does not cause harmful interference and (2) this equipment or device accepts any interference, including that which can cause undesired operation. EU DECLARATION OF CONFORMITY Hereby, Klein Tools declares that this product is in compliance with Directive 2014/53/EU and all other applicable EU requirements. The complete declaration of conformity can be found on this products page at www.kleintools.com. UKCA DECLARATION OF CONFORMITY Hereby, Klein Tools declares that this product is in compliance with the relevant statutory requirements. The complete declaration of conformity can be found on this products page at www.kleintools.com. MAINTENANCE CLEANING: Be sure speaker is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents. STORAGE: If the speaker is to be left unused for an extended period of time, charge before storing, and recharge periodically during storage, to maintain batterys charging capacity. WARRANTY www.kleintools.com/warranty DISPOSAL / RECYCLE Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov/recycle for additional information. REPRODUCCIN DE AUDIO: utilice su dispositivo o los botones de control incorporados en el altavoz para controlar el altavoz. Presione el botn para reproducir/pausar/hablar 3 para reproducir opausar el audio en su dispositivo. Presione el botn - 6 o + 7 para ajustar el volumen del altavoz. Sonar un tono cuando se alcance el volumen mximo. El volumen tambin se puede controlar con su dispositivo de audio. Presione los botones para saltar adelante 4 o para saltar atrs 2 para saltar adelante o atrs (respectivamente) durante una cancin. ENTRADA DE AUDIO AUXILIAR: conecte uno de los extremos del cable auxiliar al conector auxiliar 14 del altavoz; conecte el otro extremo del cable a la salida de lnea o al conector de auriculares de su dispositivo. FUNCIONAMIENTO DEL ALTAVOZ:

Al recibir una llamada, la msica que se est escuchando se silencia y suena un tono. Presione brevemente el botn para reproducir/pausar/hablar 3 para responder la llamada, o mantngalo presionado para rechazarla. Para finalizar la llamada, presione brevemente el botn para reproducir/pausar/hablar 3 . BROADCAST: Once you have successfully connected your AEPJS3A speaker to a Bluetooth device, you can connect up to four* more AEPJS3A speakers to your already connected AEPJS3A speaker. 1.Ensure your primary AEPJS3A speaker is turned on, this will be your Source speaker. 2.Press the Broadcast button 5 once or until SOURCE is heard. LED will turn solid white. 3.The Source speaker will broadcast a signal for three minutes, then time out. To reset the timer, press and hold the Broadcast button 5 for three seconds. 4.Power on any additional AEPJS3A speakers (up to four*) and press the Broadcast button 5 twice or until SYNCING is heard. LED will flash green. 5.Position the Syncing speakers near the Source speaker. Allow up to ten seconds for the speakers to link with each other. Upon successful connection, the synced speakers LEDs will turn solid green and SYNCED will be heard. NOTE:

1. When cycling through the Broadcast menu, three different modes will be heard,

"Solo", "Source" and "Syncing" each are described below:

"SOLO": Standalone mode, speaker is not in Broadcast mode.

"SOURCE": Is the primary speaker to which secondary speakers link.

"SYNCING": Secondary or satellite speakers to which connects to the primary speaker. 2. The maximum range between speakers is 30' (10m) 3. The broadcast connection between all speakers will NOT automatically reconnect after the speaker are turned off. To reconnect, follow the Broadcast steps above.

*Up to seven additional speakers can be connected, but for optimal performance link no more than four speakers. INDICACIN DE BATERA BAJA: el LED rojo del indicador de estado de la batera 10 parpadear cuando el nivel de la batera se reduzca a aproximadamente el5%. El altavoz se apagar automticamente cuando el nivel de batera est por debajo del 2%. Vuelva a cargar el altavoz lo antes posible. INSTALACIN DEL ALTAVOZ:

Asegrese de que la parte delantera del altavoz no est obstruida. Ubique el altavoz verticalmente sobre una superficie plana, nivelada y estable. Adhiera el altavoz a una superficie metlica con los imanes 13 ubicados enla parte posterior de la unidad.NO lo instale en equipos elctricos. Culguelo de un clavo (o elemento similar), abriendo el gancho de fijacin 12 y colocando el gancho de fijacin por encima de la cabeza del clavo. CMO CARGAR DISPOSITIVOS:

NOTA: para obtener mejores resultados, utilice el cable proporcionado con sudispositivo. 1. Conecte el cable a su dispositivo. 2. Conecte el cable de carga al puerto de carga de salida USB-A 15 o puerto de carga de entrada/salida USB-C 16 . Su dispositivo comenzar a cargarse automticamente. El dispositivo que est cargando debe indicar que la carga ha comenzado. 1. Mantenga presionado el botn de encendido 1 por 3segundos paraencender el altavoz. Su dispositivo empezar a cargarse. 2. Mantenga presionado el botn de encendido de nuevo 1 por 3segundos para apagar todas las funciones. Su dispositivo dejar de cargarse. 3. Cuando el AEPJS3A est en modo de carga externa solamente, se apagar automticamente cuando haya completado la carga y el dispositivo no extraer ms corriente. Repita estos pasos para cargar otro dispositivo. CONFORMIDAD CONFORMIDAD CON LA NORMATIVA FCC Este dispositivo cumple con la Parte 15 de las normas de la FCC y con las normas RSS exentas de licencia de Industry Canada. Su funcionamiento est sujeto a las siguientes dos condiciones: (1) este dispositivo no debe provocar interferencia perjudicial, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluida la que pueda causar unfuncionamiento no deseado. NOTA: el concesionario no es responsable de los cambios o modificaciones no aprobadas expresamente por la parte responsable de hacer cumplir las normas. Dichas modificaciones podran invalidar la autoridad del usuario para operar el equipo. Este dispositivo se ha probado y se determin que cumple con los lmites para un dispositivo digital Clase B, segn se estipula en la Parte 15 de las normas de la FCC. Estos lmites estn previstos para brindar proteccin razonable contra interferencia perjudicial en instalaciones residenciales. Este dispositivo genera, emplea y puede irradiar energa de radiofrecuencia y, si no se lo instala y se lo utiliza de conformidad con las instrucciones, puede causar interferencia perjudicial en las radiocomunicaciones. Sin embargo, no existen garantas de que esa interferencia no se produzca en una instalacin en particular. Si este equipo ocasiona interferencia perjudicial en la recepcin de radio o televisin, lo que se puede determinar apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia tomando una o varias de las siguientes medidas:

Cambie la orientacin o la ubicacin de la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte el equipo a un tomacorriente de un circuito que no sea aquel al que est conectado el receptor. Consulte al distribuidor o a un tcnico especializado en radio/televisin. DECLARACIONES DE EXPOSICIN A LA RADIACIN DE RADIOFRECUENCIA DE LA FCC:

Este transmisor no debe instalarse junto a ninguna otra antena o transmisor ni funcionar conjuntamente con estos dispositivos. Este equipo cumple con los lmites de exposicin a la radiacin de radiofrecuencia de la FCC fijados para un entorno no controlado. Este equipo debe instalarse y usarse a una distancia mnima de 5 mm entre el radiador y su cuerpo o personas alrededor. Conforme a las regulaciones de Industry Canada, este transmisor de radio solo puede funcionar con una antena de un tipo y con una ganancia mxima (o menor) aprobada para NOTIFICACIN DE LA IC PARA USUARIOS EN CANAD Este dispositivo cumple con la(s) norma(s) RSS exenta(s) de licencia de Industry Canada. Su funcionamiento est sujeto a las siguientes dos condiciones: (1) este dispositivo no debe provocar interferencia perjudicial, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluida la que pueda causar un funcionamiento no deseado. Este dispositivo cumple con la norma RSS-247 de Industry Canada. Su funcionamiento est sujeto a la condicin de que este dispositivo no ocasione interferencia perjudicial. Este aparato digital Clase B cumple con la normativa canadiense ICES-003. DECLARACIN DE EXPOSICIN A LA RADIACIN DE IC:

Este equipo cumple con los lmites de exposicin a la radiacin de IC fijados para un entorno no controlado. Este equipo debe instalarse y usarse a una distancia mnima de 5 mm entre el radiador y su cuerpo. IFETEL REPORTE Para su uso en Mxico, la operacin de este equip est sujeta a las siguientes dos condiciones: (1) es possible que este equip o dispostivo no cause interferencia prejudicial y (2) este equip o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. DECLARACIN DE CONFORMIDAD DE LA UE Por el presente, Klein Tools declara que este producto cumple con la Directiva 2014/53/UE y cualquier otro requisito aplicable de la UE. Puede leer la declaracin de conformidad completa en la pgina de este producto, en www.kleintools.com. DECLARACIN DE CONFORMIDAD DE UKCA Por el presente, Klein Tools declara que este producto cumple con los requisitos relevantes de ley. Puede leer la declaracin de conformidad completa en la pgina de este producto, en www.kleintools.com. MANTENIMIENTO LIMPIEZA: Asegrese de que el altavoz est apagado y lmpielo con un pao limpio, seco, que no deje pelusas. No utilice solventes ni limpiadores abrasivos. ALMACENAMIENTO: Si el altavoz no se utilizar por un tiempo prolongado, crguelo antes de guardarlo y vuelva a cargarlo peridicamente durante el perodo de almacenamiento para preservar la capacidad de carga de la batera. LECTURE AUDIO: Utilisez votre appareil pour contrler le haut-parleur ou utilisez les boutons de commande intgrs. Appuyez sur le bouton de lecture/pause/microphone 3 pour faire jouer lecontenu audio sur votre appareil ou pour interrompre la lecture. Appuyez sur les boutons - 6 ou + 7 pour ajuster le volume du haut-parleur. Un signal sonore retentit lorsque le volume maximal est atteint. Le volume peut aussi tre ajust par lintermdiaire de votre appareil. Appuyez sur le bouton de saut vers lavant 4 ou de saut vers larrire 2 pour faire un saut en avant ou en arrire (respectivement) pendant une chanson. UTILISATION DE LENTRE AUDIO AUXILIAIRE: Branchez une extrmit du cble auxiliaire dans la prise auxiliaire 14 du haut-parleur, puis branchez lautre extrmit dans la prise de sortie ou dcouteurs de votre appareil. UTILISATION DU TLPHONE HAUT-PARLEUR:

Lors dun appel entrant, la lecture audio est mise en sourdine et la sonnerie se fait entendre. Appuyez brivement sur le bouton de lecture/pause/

microphone 3 pour rpondre, ou plus longuement pour ignorer lappel. Pour raccrocher, appuyez brivement sur le bouton de lecture/pause/

microphone 3 . BROADCAST: Once you have successfully connected your AEPJS3A speaker to a Bluetooth device, you can connect up to four* more speakers to your already connected AEPJS3A speaker. 1.Ensure your primary AEPJS3A speaker is turned on, this will be your Source speaker. 2.Press the Broadcast button 5 once or until SOURCE is heard. LED will turn solid white. 3.The Source speaker will broadcast a signal for three minutes, then time out. To reset the timer, press and hold the Broadcast button 5 for three seconds. 4.Power on any additional AEPJS3A speakers (up to four*) and press the Broadcast button 5 twice or until SYNCING is heard. LED will flash green. 5.Position the Syncing speakers near the Source speaker. Allow up to ten seconds for the speakers to link with each other. Upon successful connection, the synced speakers LEDs will turn solid green and SYNCED will be heard. NOTE:

1.When cycling through the Broadcast menu, three different modes will be heard,

"Solo", "Source" and "Syncing" each are described below:

"SOLO": Standalone mode, speaker is not in Broadcast mode.

"SOURCE": Is the primary speaker to which secondary speakers link.

"SYNCING": Secondary or satellite speakers to which connects to the primary speaker. 2. The maximum range between speakers is 30' (10m) 3. The broadcast connection between all speakers will NOT automatically reconnect after the speaker are turned off. To reconnect, follow the Broadcast steps above.

*Up to seven additional speakers can be connected, but for optimal performance link no more than four speakers. INDICATEUR DE BATTERIE FAIBLE: Le voyant rouge de lindicateur dtat dela batterie 10 clignotera lorsque le niveau de la batterie sera environ 5%. Le haut-parleur steint automatiquement lorsque le niveau de la batterie est infrieur 2%. Vous devez recharger le haut-parleur aussitt que possible. POSITIONNEMENT DU HAUT-PARLEUR:

Assurez-vous que le devant du haut-parleur nest pas obstru. Placez le haut-parleur debout sur une surface plane, niveau et stable. Fixez le haut-parleur une surface mtallique laide des aimants 13 qui se trouvent au dos de lunit. NE PLACEZ PAS le haut-parleur sur unappareil lectrique. Suspendez-le un clou (ou un lment similaire) en plaant le crochet prvu cet effet 12 par-dessus la tte du clou. RECHARGE DAPPAREILS:

REMARQUE: Pour des rsultats optimaux, utilisez le cble fourni avec votreappareil. 1. Branchez le cble votre appareil. 2. Connectez le cble de recharge au port de sortie USB-A 15 ou au port dentre et de sortie USB-C 16 . La recharge de lappareil commencera automatiquement. Il devrait indiquer quil est en cours de recharge. 1. Appuyez sur le bouton de mise sous tension 1 et maintenez-le 2. 3. enfonc pendant 3secondes pour allumer le haut-parleur; votre appareil commencera recharger. Appuyez nouveau sur le bouton de mise sous tension 1 et maintenez-le enfonc pendant 3secondes. Toutes les fonctions serontarrtes; votre appareil cessera de recharger. Lorsque le haut-parleur AEPJS3A est en mode charge externe seulement, il steindra automatiquement lorsque lappareil sera compltement recharg et ne consommera plus dlectricit. Rptez ces tapes pour recharger un autre appareil. CONFORMIT CONFORMIT FCC Cet appareil est conforme la partie 15 des rgles de la FCC ainsi quaux normes CNR dIndustrie Canada portant sur les appareils exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne peut causer dinterfrences nuisibles et (2) il doit accepter toute interfrence reue, notamment celles pouvant entraner un fonctionnement indsirable. REMARQUE : Le concessionnaire nest pas responsable des changements ou des modifications qui ne sont pas expressment approuvs par la partie responsable de la conformit. De telles modifications pourraient annuler le droit de lutilisateur dutiliser lappareil. Cet appareil a fait lobjet dessais prouvant quil respecte les limites imposes aux appareils numriques de classe B, conformment la partie 15 des rgles de la FCC. Ces limites sont destines fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet appareil gnre, utilise et peut mettre des radiofrquences; sil nest pas install et utilis conformment ces instructions, il peut causer des interfrences nuisibles aux communications radio. Il nexiste toutefois aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si lappareil cause des interfrences nuisibles la rception des signaux de radio ou de tlvision, ce qui peut tre dtermin en teignant et en allumant lappareil, lutilisateur peut tenter de corriger la situation par un ou plusieurs des moyens suivants :

Rorienter ou relocaliser lantenne rceptrice. Augmenter la distance entre lappareil et le rcepteur. Brancher lappareil sur un circuit lectrique diffrent de celui o le rcepteur est branch. Communiquer avec le revendeur ou un technicien expriment en radio/tlvision pour obtenir de laide. NONCS DE LA FCC SUR LEXPOSITION AUX RADIOFRQUENCES :

Cet metteur ne doit pas tre install ou exploit conjointement avec dautres antennes ou metteurs. Cet quipement respecte les limites dexposition aux radiofrquences de la FCC nonces pour les environnements non contrls. Cet quipement doit tre install et utilis en maintenant une distance minimale de 5 mm entre le radiateur et votre corps ou les personnes proximit. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. AVIS DINDUSTRIE CANADA AUX UTILISATEURS CANADIENS Cet appareil est conforme aux normes CNR dIndustrie Canada portant sur les appareils exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne peut causer dinterfrences nuisibles et (2) il doit accepter toute interfrence reue, notamment celles pouvant entraner un fonctionnement indsirable de lappareil. Cet appareil est conforme la norme CNR-247 dIndustrie Canada. Le fonctionnement est soumis la condition que cet appareil ne produit pas dinterfrences nuisibles. Cet appareil numrique de classe B est conforme la norme canadienne NMB-003. NONC DINDUSTRIE CANADA SUR LEXPOSITION AUX RAYONNEMENTS :

Cet quipement respecte les limites dexposition aux rayonnements dIndustrie Canada nonces pour les environnements non contrls. Cet quipement doit tre install et utilis en maintenant une distance minimale de 5 mm entre le radiateur et votre corps. IFETEL RAPPORT Pour une utilisation au Mexique, le fonctionnement de cet quipement est soumis aux deux conditions suivantes: (1) Lquipement ou le dispositif ne cause pas dinterfrences nuisibles et (2) lquipement ou le dispositif accepte toutes les interfrences, y compris celles qui peuvent causer un fonctionnement indsirable. DCLARATION DE CONFORMIT DE LUE Par la prsente, KleinTools dclare que ce produit est conforme la directive2014/53/UE et toutes les autres exigences applicables de lUnion europenne (UE). La dclaration complte se trouve sur la page de ce produit ladresse www.kleintools.com. DCLARATION DE CONFORMIT AUX EXIGENCES DE LUKCA Par la prsente, KleinTools dclare que ce produit est conforme aux exigences rglementaires applicables. La dclaration complte se trouve sur la page de ce produit ladresse www.kleintools.com.. ENTRETIEN NETTOYAGE: Assurez-vous dteindre le haut-parleur, puis essuyez-

le laide dun linge non pelucheux propre. Nutilisez pas de nettoyant abrasif ni de solvant. RANGEMENT: Si le haut-parleur doit rester inutilis pendant une longue priode de temps, rechargez-le avant de lentreposer. Rechargez-le ensuite rgulirement afin de maintenir la capacit de charge de la pile. GARANTA www.kleintools.com/warranty ELIMINACIN/RECICLAJE GARANTIE www.kleintools.com/warranty MISE AU REBUT/RECYCLAGE No arroje el equipo ni sus accesorios a la basura. Los elementos sedeben desechar correctamente de acuerdo con las regulaciones locales. Para obtener ms informacin, consulte www.epa.gov/recycle. Ne mettez pas lappareil et ses accessoires au rebut. Ces articles doivent tre limins conformment aux rglements locaux. Pour de plus amples renseignements, consultez les sites www.epa.gov/recycle. AEPJS3A-1390371ART.indd 2 4/25/2023 2:30:03 PM 4/25/2023 2:30:03 PM

IC: 21655-AEPJS3A FCC ID: 2A128AEPJS3A Model:AEPJS3A IFETEL:

F@

&&OJ&

y8Wh) )r'

uetoo1eakerwith Magnet andok cs 30851 rnk W J 8 b k e 5 3 q E oa I du T L m md m m Mt b

Klein Tools Inc. Section 2.911(d)(5)(i) Certification EquipmentType Company name: Klein Tools Inc. Address: 450 Bond Street Lincolnshire, IL 60069, USA Product Name: Bluetooth Speaker with Magnet and Hook FCC ID: 2AI28-AEPJS3A Model(s): AEPJS3A 2.911(d)(5)(i) EquipmentType We, [Klein Tools Inc.] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered ListNOTE 1 Yours sincerely, Name: Russ Goldmann II Date: 5/5/2023 Title and Company name:

Director, Product Design and Development / Klein Tools Inc. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Klein Tools Inc. Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Klein Tools Inc. Address: 450 Bond Street Lincolnshire, IL 60069, USA Product Name: Bluetooth Speaker with Magnet and Hook FCC ID: 2AI28-AEPJS3A Model(s): AEPJS3A 2.911(d)(5)(ii) Applicant filing We, [Klein Tools Inc.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identifiedNOTE 1on the Covered ListNOTE 2,established pursuant to 1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Russ Goldmann II Date: 5/9/2023 Title and Company name:

Director, Product Design and Development / Klein Tools Inc. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

4 5 0 B o n d S t r e e t L i n c o l n s h i r e , I L 6 0 0 6 9 p. 8 4 7 . 8 2 1 . 5 5 0 0 w w w . K l e i n t o o l s. c o m Section 2.911(d)(7) USA Agent for Service of Process To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Company name: Klein Tools, Inc. Address: 450 Bond St. Lincolnshire, IL 60069 FRN: 0025719949 Product Name: Bluetooth Jobsite Earbuds FCC IDs: 2AI28-AEPJS3A Model(s): AEPJS3A 2.911(d)(7) USA Designated Agent for Service of Process We, [Klein Tools, Inc.] (the applicant) designate [ourselves] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Klein Tools, Inc. Address: 450 Bond St. Lincolnshire, IL 60069, USA Contact Name: Russell Goldmann II Telephone No: 847-821-3305 Email: rgoldmann@kleintools.com Signature:___________________________ Title: Product Safety Engineering Director Date:

NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-communications-supply-chain-through-the May 26, 2023

Letter of Authorization Company: Klein Tools Inc. Address: 450 Bond Street Lincolnshire, IL 60069, USA Product Name: Bluetooth Speaker with Magnet and Hook Model Number: AEPJS3A FCC Identifier: 2AI28-AEPJS3A We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Russell Goldmann II Date: Feb.2, 2023 Title: Director, Product Safety and Compliance Signature of applicant:

DocuSign Envelope ID: AFD25686-E9BD-46DF-AE15-0101F727F7AD

Klein Tools Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:2AI28-AEPJS3A Date: 2023/02/02 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Russell Goldmann II Title: Director, Product Safety and Compliance Email: rgoldmann@kleintools.com DocuSign Envelope ID: AFD25686-E9BD-46DF-AE15-0101F727F7AD