all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.50 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | RF Exposure Info | |||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) |
1 | User Manual | Users Manual | 3.50 MiB |
ET20 ENGLISH INSTRUCTION MANUAL Wireless Borescope 6FT ARMORED GOOSENECK 9MM CAMERA WITH ON-BOARD LED LIGHTS RECHARGEABLE LITHIUM ION BATTERY WIFI CONNECTION*
TO iPHONE AND MOST ANDROID PHONES
*App is optimized for:
Apple iOS version 6 or higher Android versions 4.0 or higher 9 m 3 m IP67/42*
*Camera is rated IP67. Body is rated IP42. ESPAOL FRANAIS pg. 17 pg. 33 ET20-1390262ART.indd 1 1/24/2019 3:35:56 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ENGLISH GENERAL SPECIFICATIONS Klein Tools ET20 is a WiFi-connected borescope with a 0.35" (9mm) camera and a 6' (1.8 m) armored gooseneck. The video output is displayed on Android and AppleiOS powered phones by a WiFi signal transmitted from the Borescope. The camera output can only be displayed on an Apple iOS and/or Android device using the Klein Tools Borescope App, available at Kleintools.com, Google Play and the App Store. Operating Altitude: 6562 ft. (2000 m) Relative Humidity: <85% non-condensing Operating/Charging Temperature: 15F to 140F (-9C to 60C) Storage Temperature: 32F to 113F (0C to 45C) Dimensions: 7.31" x 2.3" x 1.5" (185 x 58 x 38 mm) Weight: 20 oz. (567 g) Camera Output: 640 x 480 pixels Camera Frames per Second: 25 Camera Gooseneck Length: 6 ft. (1.8 m) Battery: Li-Ion, 3.6V / 2200mAH (internal) Battery Life: Approx. 6 hours without lights, 5.5 Hours at maximum LED light output Charging Requirements: 5V DC (maximum), 0.4A (minimum) Conformance/Compliance: CE, FCC Class B, IC, & BC Pollution degree: 2 Ingress Protection: Body: IP42 dust & water resistant Camera: IP67 dustproof & waterproof Drop Protection: 9.8 ft. (3 m) Specifications subject to change. 2 ET20-1390262ART.indd 2 1/24/2019 3:35:57 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNINGS To ensure safe operation and service of the instrument, follow these instructions. Failure to observe these warnings can result in serious personal injury, fire, or electrical shock. The borescope, including the camera end, is NOT insulated. Avoid probing areas where energized conductive elements may be present. Shut off power to nearby work areas before starting work. Do NOT probe moving machinery that could catch the borescope and/or camera end, and cause harm to the operator and the Borescope. NEVER completely immerse the camera in water or liquids. Do NOT use the borescope for underwater inspections. Avoid probing areas where chemicals may be present. NOT intended for use on people or animals. Do NOT use near sources of heat. Keep steady footing at all times, following ladder safety procedures when necessary. NOTE Do NOT use if the charging port or housing is damaged in any way. No user-serviceable parts inside. Do NOT open or attempt to repair. Do NOT expose to direct sunlight, open flame, heat sources, equipment that produces heat, or extremes of environmental temperature The borescope body is NOT waterproof. To keep dust and other foreign items out of the unit, keep the rubber cover over the charging port when not in use ET20-1390262ART.indd 3 1/24/2019 3:35:57 PM 3 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ENGLISH COMPLIANCE FCC & IC COMPLIANCE This device complies with part 15 of the FCC RULES and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC & IC RF EXPOSURE STATEMENTS:
This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body or nearby persons. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. 4 ET20-1390262ART.indd 4 1/24/2019 3:35:57 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A COMPLIANCE FCC RF EXPOSURE INFORMATION (SAR) This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. IC NOTICE TO CANADIAN USERS This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 5 mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body. EXPOSURE OF HUMANS TO RF FIELDS (RSS-102):
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the RSS with the device transmitting at its highest certified power level in all tested frequency band without distance attaching away from the body. 5 ET20-1390262ART.indd 5 1/24/2019 3:35:57 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ENGLISH FEATURE DETAILS FRONT NOTE: There are no user-
serviceable parts inside. BACK 1. Power Button 2. Increase Camera LED Output Button 3. Decrease Camera LED Output Button 4. WiFi Indicator 5. Battery Status Indicator 6. Micro USB Charging Port 7. Charging Port Cover 8. Pocket Clip 9. 6' (1.8m) Gooseneck 10. Camera 11. Camera LED 12. Hook Attachment 8 5 9 10 11 4 2 3 1 6 7 12 BOTTOM 6 INDICATOR COLOR Solid green Solid red Slow-blinking green Slow-blinking red ET20-1390262ART.indd 6 1/24/2019 3:35:58 PM WiFi INDICATOR 4 When turning on the borescope, the WiFi Indicator will illuminate solid green for a few seconds, then begin to slowly blink when transmitting a WiFi signal. Other behaviors detailed below:
INDICATOR COLOR Solid green Slow-blinking green Quick-blinking green BATTERY INDICATOR 5 During initial power-up of the borescope, the battery light will blink green 3 times. Other behaviors detailed below:
Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A SYMBOLS ON BACK OF INSTRUMENT Warning or Caution Read Instructions DC voltage/
current Wear approved eye protection Do not probe moving machinery WEEE Battery disposal INDICATORS NOT insulated - Will NOT protect against electric shock Conformit Europenne:
Conforms with European Economic Area directives Conforms with BCS regulations of California Energy Commission WiFi INDICATOR 4 When turning on the borescope, the WiFi Indicator will illuminate solid green for a few seconds, then begin to slowly blink when transmitting a WiFi signal. Other behaviors detailed below:
INDICATOR COLOR Solid green Slow-blinking green Quick-blinking green STATUS INDICATED Unit is connected to a phone and is active The device is actively transmitting a WiFi signal, labeled as KT Borescope The phone initially connected to the borescope is no longer connected, normally the result of the phone entering Power-Save mode BATTERY INDICATOR 5 During initial power-up of the borescope, the battery light will blink green 3 times. Other behaviors detailed below:
INDICATOR COLOR Solid green Solid red Slow-blinking green Slow-blinking red STATUS INDICATED Battery has more than 20% charge remaining Battery has 20% charge remaining Battery is charging, currently at or below 20% charge level Battery is charging, currently at more than 20% charge level 7 ET20-1390262ART.indd 7 1/24/2019 3:35:58 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ENGLISH OPERATING INSTRUCTIONS CHARGING THE BORESCOPE BATTERY NOTE: Fully charge borescope before use. First-time charge should be at least 7 hours. Connect micro-USB cable (included) to USB charging port 6 , plug the other end into a computer, USB AC adapter, or other USB power supply (not included). When charging, the Battery indicator 5 will slow-flash either red or green, depending upon charge level (see INDICATORS section). Normal charging time is 5 to 6 hours. NOTE: Only use USB adapters/power supplies that meet specified charging requirements
(see GENERAL SPECIFICATIONS section). DOWNLOADING THE APP The ET20 app is required for functionality. The app is available for free from Google Play or the App Store. Find more information at Klein Tools website KleinTools.com. www.kleintools.com CONNECTING YOUR PHONE TO THE BORESCOPE VIA WiFi 1. Press the Power button 1 for approximately 3 seconds to power-on the borescope. The WiFi indicator 4 and Battery indicator 5 will flash on. The WiFi light will flash slowly when the borescope is actively transmitting a WiFi signal. Wait for this to occurr before trying to connect the phone to the borescope. 2. On your phone, turn on the wireless networks, and enter the menu that displays available networks (menu location will vary based on phone being used). 3. Once the WiFi indicator begins to flash slowly, select KT Borescope from the phone menu. If unavailable, wait 10 seconds to ensure the borescope is fully powered on. 4. Select the Klein Tools Borescope app on the phone. The app will open in Display mode with the camera displaying an image
(see APP BUTTON/ICON DETAILS section). NOTE: Phone must be disconnected from the borescope's WiFi signal if an internet connection is required on the phone. 8 ET20-1390262ART.indd 8 1/24/2019 3:35:58 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A OPERATING INSTRUCTIONS DISPLAY MODE BUTTON/ICON DETAILS A B D E I A. Photo/Video screen icon B. Borescope battery status C. Camera image D. Camera LED brightness slider E. Settings icon F. Rotate Image button G. Photo button H. Video start/stop button I. Elapsed Time (Video) C F G H Appearance while recording 9 ET20-1390262ART.indd 9 1/24/2019 3:35:58 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A J. Previous Screen K. Select Items L. Video Menu M. Photo Menu N. Active Menu
(Photo or Video) O. Files ENGLISH OPERATING INSTRUCTIONS PHOTO/VIDEO FILE MENU BUTTON/ICON DETAILS ANDROID iOS N N J J O L 10 N K K M ET20-1390262ART.indd 10 1/24/2019 3:35:59 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A OPERATING INSTRUCTIONS FILE MANAGEMENT MODE BUTTON/ICON DETAILS ANDROID iOS T T P Q R P Q R S P. Copy or send selected file
(additional options on Android) Q. Delete selected file R. Exit Edit Mode
(when in Edit Mode only) S. File Selected Indicator T. Review Mode: File name Manage Mode: Files selected ET20-1390262ART.indd 11 1/24/2019 3:35:59 PM 11 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ENGLISH OPERATING INSTRUCTIONS APP SCREEN ORIENTATION The app will display in Portriat or Landscape view, depending on the rotation of the phone. To change the orientation of the app screen, simply rotate the phone 90 degrees. Portrait View Landscape View 12 ET20-1390262ART.indd 12 1/24/2019 3:35:59 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A The app will display in Portriat or Landscape view, depending on the rotation of the phone. OPERATING INSTRUCTIONS ROTATING THE CAMERA IMAGE ON THE APP SCREEN Sometimes it may be necessary to rotate the camera image relative to the app screen. Each tap of the Rotate Image button F will rotate the image clockwise in 90 increments. This does not affect the rotation of the entire app screen, just the camera image. TAKING PHOTOS While in Display mode, aim the camera 10 at the subject to be photographed and tap the Photo button G to take a photo. CAPTURING VIDEO While in Display mode, aim the camera 10 at the subject to be recorded and tap the Video Start/Stop button H . While recording video, the elapsed time will be shown I , and the the Video Start/Stop button will turn red and display the square Stop symbol. To end the recording, tap the Video Start/Stop button again. The Video Start/Stop button will return to its normal appearance. VIEWING AND MANAGING PHOTOS AND VIDEO FILES To access photo and/or video files, tap the Settings icon E , then select the Video L or Photo M menu. Tap on a file O to view. To manage files, tap the Select Items icon K to select file(s). Once selected, files can be copied, sent externally P or deleted Q . NOTE: WiFi to the borescope must be disconnected in the phone's Settings menu in order to send files. To exit File Management mode, tap the Exit File Management mode icon R . ET20-1390262ART.indd 13 1/24/2019 3:35:59 PM 13 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ENGLISH Be sure unit is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents. CLEANING STORAGE Remove the batteries when the unit is not in use for a prolonged period of time. Do not expose to high temperatures or humidity. After a period of storage in extreme conditions exceeding the limits mentioned in the General Specifications section, allow the unit to return to normal operating conditions before using. WARRANTY www.kleintools.com/warranty DISPOSAL / RECYCLE Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov or www.erecycle.org for additional information. Google Play and Android are registered trademarks of Google LLC. Apple and App Store are registered trademarks of Apple Inc. CUSTOMER SERVICE KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069 1-877-775-5346 customerservice@kleintools.com www.kleintools.com 14 ET20-1390262ART.indd 14 1/24/2019 3:35:59 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A NOTES ET20-1390262ART.indd 15 1/24/2019 3:35:59 PM 15 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A NOTES CUSTOMER SERVICE KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069 1-877-775-5346 customerservice@kleintools.com www.kleintools.com ET20-1390262ART.indd 16 1/24/2019 3:35:59 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL MANUAL DE INSTRUCCIONES Boroscopio inalmbrico CUELLO DE CISNE BLINDADODE 6'
CMARA DE 9MM CON LUCESLED INCORPORADAS BATERA DE IONES DE LITIORECARGABLE CONEXIN WIFI*
PARA iPHONE Y LA MAYORA DE TELFONOS ANDROID
*La aplicacin est optimizada para:
Versin iOS 6 de Apple o superior Versiones 4.0 de Android o superiores 9m 3 m IP67/42*
*Cmara con clasificacin IP67. Cuerpo con clasificacin IP42. ET20 17 ET20-1390262ART.indd 17 1/24/2019 3:36:00 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL ESPECIFICACIONES GENERALES El ET20 de Klein Tools es un boroscopio con conexin WiFi, cmara de 0,35" (9mm) y cuello de ganso blindado de 6' (1,8m). La salida de video se muestra en telfonos con sistema Android e iOS de Apple mediante una seal WiFi transmitida desde el boroscopio. La salida de la cmara solo se puede mostrar en dispositivos con iOS de Apple y/o sistema Android mediante la aplicacin Klein Tools Borescope, disponible en Kleintools.com, Google Play y la App Store. Altitud de funcionamiento: 6562' (2000m) Humedad relativa: <85%, sin condensacin Temperatura de funcionamiento/carga: 15F a 140F (-9C a 60C) Temperatura de almacenamiento: 32F a 113F (0C a 45C) Dimensiones: 7,31" 2,3" 1,5" (185mm 58mm 38mm) Peso: 20oz (567g) Salida de cmara: 640 480 pixeles Fotogramas de la cmara por segundo: 25 Longitud de la cmara cuello de cisne: 6' (1,8m) Batera: Iones de litio, 3,6V / 2200mAH (interna) Vida til de la batera: Aprox. 6horas sin luces, 5,5horas con salida mxima de luzLED Requisitos de carga: 5V CD (mxima), 0,4A (mnima) Conformidad/Cumplimiento con: CE, ClaseB de la FCC, IC, y BC Grado de contaminacin: 2 Proteccin de ingreso: Cuerpo: IP42 resistente al agua y al polvo Cmara: IP67 a prueba de polvo y agua Proteccin ante cadas: 9,8' (3m) Especificaciones sujetas a cambios. 18 ET20-1390262ART.indd 18 1/24/2019 3:36:00 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A CONSERVE ESTAS INSTRUCCIONES PARA CONSULTARLAS EN EL FUTURO ADVERTENCIAS Para garantizar el funcionamiento y servicio seguros del instrumento, siga estas instrucciones. El incumplimiento de estas advertencias puede provocar lesiones personales, incendio o choques elctricos. El boroscopio, incluido el extremo de la cmara, NO tiene aislamiento. Evite reas de sondeo donde pueda haber elementos conductores energizados. Apague el suministro de energa en las reas de trabajo cercanas antes de comenzar el trabajo. NO sondee mquinas en movimiento que puedan atrapar el boroscopio y/o el extremo de la cmara, y producir daos al operador y al boroscopio. NUNCA sumerja completamente la cmara en agua o lquidos. NO utilice el boroscopio para realizar inspecciones bajo el agua. Evite reas de sondeo donde pueda haber productos qumicos. NO debe utilizarse en personas ni animales. NO lo utilice cerca de fuentes de calor. Mantngase equilibrado en todo momento y siga los procedimientos de seguridad de escaleras cuando sea necesario. NOTA NO lo utilice si el puerto de carga o la carcasa estn daados de algn modo. El dispositivo no contiene en su interior piezas que el usuario pueda reparar. NO lo abra ni intente repararlo. NO lo exponga a la luz solar directa, llamas abiertas, fuentes de calor, equipos que generen calor o temperaturas ambiente extremas. El cuerpo del boroscopio NO es resistente al agua. Para protegerlo del polvo y otros objetos extraos en el exterior de la unidad, mantenga la cubierta de caucho sobre el puerto de carga cuando no est en uso. 19 ET20-1390262ART.indd 19 1/24/2019 3:36:00 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL CONFORMIDAD CONFORMIDAD CON LA NORMATIVA FCC/IC Este dispositivo cumple con la Parte15 de las normas de la FCC y con las normas RSS exentas de licencia de Industry Canada. Su funcionamiento est sujeto a las siguientes dos condiciones: (1) este dispositivo no debe provocar interferencia perjudicial, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluida la que pueda causar un funcionamiento no deseado. NOTA: el concesionario no es responsable de los cambios o modificaciones no aprobadas expresamente por la parte responsable de hacer cumplir las normas. Dichas modificaciones podran invalidar la autoridad del usuario para operar el equipo. Este dispositivo se ha probado y se determin que cumple con los lmites para un dispositivo digital ClaseB, segn se estipula en la Parte15 de las normas de la FCC. Estos lmites estn previstos para brindar proteccin razonable contra interferencia perjudicial en instalaciones residenciales. Este dispositivo genera, emplea y puede irradiar energa de radiofrecuencia y, si no se lo instala y se lo utiliza de conformidad con las instrucciones, puede causar interferencia perjudicial en las radiocomunicaciones. Sin embargo, no existen garantas de que esa interferencia no se produzca en una instalacin en particular. Si este equipo ocasiona interferencia perjudicial en la recepcin de radio o televisin, lo que se puede determinar apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia tomando una o varias de las siguientes medidas:
Cambie la orientacin o la ubicacin de la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte el equipo a un tomacorriente de un circuito que no sea aquel al que est conectado el receptor. Consulte al distribuidor o a un tcnico especializado en radio/televisin. DECLARACIONES DE EXPOSICIN A LA RADIACIN DE RADIOFRECUENCIA DE LA FCC:
Este transmisor no debe instalarse junto a ninguna otra antena o transmisor ni funcionar conjuntamente con estos dispositivos. Este equipo cumple con los lmites de exposicin a la radiacin de radiofrecuencia de la FCC fijados para un entorno no controlado. Este equipo debe instalarse y usarse a una distancia mnima de 5mm entre el radiador y su cuerpo o personas alrededor. Conforme a las regulaciones de Industry Canada, este transmisor de radio solo puede funcionar con una antena de un tipo y con una ganancia mxima (o menor) aprobada para el transmisor por Industry Canada. Para reducir la posible interferencia de radiofrecuencia a otros usuarios, el tipo de antena y su ganancia deben elegirse de modo que la potencia isotrpica radiada equivalente (PIRE) no sea ms que la necesaria para lograr una comunicacin exitosa. 20 ET20-1390262ART.indd 20 1/24/2019 3:36:00 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A CONFORMIDAD INFORMACIN SOBRE LA EXPOSICIN A RF DE LA FCC (SAR) Este dispositivo cumple los requisitos gubernamentales relacionados con la exposicin a las ondas de radio. Este dispositivo est diseado y fabricado de modo que no exceda los lmites de emisiones en relacin con la exposicin a energa de radiofrecuencia (RF) establecidos por la Comisin Federal de Comunicaciones del Gobierno de los EE. UU. La norma sobre exposicin a dispositivos inalmbricos utiliza una unidad de medida conocida como el ndice de Absorcin Especfica, o SAR, por sus siglas en ingls. El lmite de SAR estipulado por la FCC es de 1,6 W/kg. Las pruebas del SAR se realizan usando posiciones de operacin estndar aceptadas por la FCC, en las cuales el dispositivo transmite en todas las bandas de frecuencia al nivel de potencia ms alto certificado. A pesar de que el SAR se determina en el nivel de potencia ms alto certificado, el nivel real del SAR del dispositivo en funcionamiento puede ser mucho menor que el valor mximo. Esto se debe a que el dispositivo est diseado para funcionar con mltiples niveles de potencia, de modo que utilice nicamente la potencia necesaria para alcanzar la red. En general, cuanto ms cerca se encuentre de la antena inalmbrica de una estacin base, menor ser la potencia de salida. Si bien pueden existir diferencias entre los niveles del SAR de diferentes dispositivos y en distintas posiciones, todos cumplen con los requisitos gubernamentales. NOTIFICACIN DE LA IC PARA USUARIOS EN CANAD Este dispositivo cumple con la(s) norma(s) RSS exenta(s) de licencia de Industry Canada. Sufuncionamiento est sujeto a las siguientes dos condiciones: (1) este dispositivo no debe provocar interferencia perjudicial, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluida la que pueda causar un funcionamiento no deseado. Este dispositivo cumple con la norma RSS-247 de Industry Canada. Su funcionamiento est sujeto a la condicin de que este dispositivo no ocasione interferencia perjudicial. Este aparato digital ClaseB cumple con la normativa canadiense ICES-003. Este equipo cumple con los lmites de exposicin a la radiacin de IC fijados para un entorno no controlado. Este equipo debe instalarse y usarse a una distancia mnima de 5mm entre el radiador y su cuerpo. Este transmisor no debe instalarse junto a ninguna otra antena o transmisor ni funcionar conjuntamente con estos dispositivos. DECLARACIN DE EXPOSICIN A LA RADIACIN DE IC:
Este equipo cumple con los lmites de exposicin a la radiacin de IC fijados para un entorno no controlado. Este equipo debe instalarse y usarse a una distancia mnima de 5mm entre el radiador y su cuerpo. EXPOSICIN DE LOS SERES HUMANOS A LOS CAMPOS DE RF (RSS-102) La energa que irradian las antenas conectadas a los adaptadores inalmbricos cumple con el lmite de IC estipulado en el requisito de exposicin a RF de la norma IC RSS-102, libro 5, clusula 4. Las pruebas del SAR se realizan usando posiciones de operacin recomendadas y aceptadas por la RSS, en las cuales el dispositivo transmite en todas las bandas de frecuencia al nivel de potencia ms alto certificado, sin distanciarse del cuerpo. 21 ET20-1390262ART.indd 21 1/24/2019 3:36:00 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL DETALLES DE LAS CARACTERSTICAS VISTA FRONTAL VISTA TRASERA NOTA: El dispositivo no contiene en su interior piezas que el usuario pueda reparar. 1. Botn de encendido 2. Botn de aumento de potencia de luz LED de la cmara 3. Botn de disminucin de potencia de luz LED de la cmara 4. Indicador WiFi 5. Indicador de estado de la batera 6. Puerto de carga micro-USB 7. Cubierta del puerto de carga 8. Clip de bolsillo 9. Cuello de cisne de 6' (1,8m) 10. Cmara 11. LED de la cmara 12. Accesorio de gancho 8 4 2 3 1 22 5 9 10 11 VISTA INFERIOR 7 12 6 Indicador WIFI 4 Cuando se enciende el boroscopio, el indicador WiFi se encender en verde fijo durante unos segundos y luego comenzar a parpadear lentamente cuando se transmita una seal de WiFi. Otros indicadores se describen a continuacin:
COLOR DEL INDICADOR Verde fijo Verde de parpadeo lento El dispositivo est transmitiendo activamente una seal WiFi, Verde de parpadeo rpido INDICADOR DE BATERA 5 Durante el encendido inicial del boroscopio, la luz de la batera parpadear 3 veces en verde. Otros indicadores se describen a continuacin:
COLOR DEL INDICADOR Verde fijo Rojo fijo Verde de parpadeo lento La batera se est cargando, actualmente a un nivel de carga Rojo de parpadeo lento La batera se est cargando, actualmente a un nivel de carga ET20-1390262ART.indd 22 1/24/2019 3:36:01 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A VISTA TRASERA SMBOLOS EN LA PARTE POSTERIOR DEL INSTRUMENTO Advertencia o precaucin Lea las instrucciones Voltaje/
Corriente CD Use proteccin para ojos aprobada NO utilizar la sonda en mquinas en movimiento WEEE Eliminacin de la batera INDICADORES SIN aislamiento - NO brinda proteccin contra choque elctrico Conformit Europenne:
Cumple con las normas del reaEconmica Europea Cumple con las normas BCS de la Comisin de Energa deCalifornia Indicador WIFI 4 Cuando se enciende el boroscopio, el indicador WiFi se encender en verde fijo durante unos segundos y luego comenzar a parpadear lentamente cuando se transmita una seal de WiFi. Otros indicadores se describen a continuacin:
COLOR DEL INDICADOR Verde fijo La unidad est conectada a un telfono y se encuentra activa Verde de parpadeo lento El dispositivo est transmitiendo activamente una seal WiFi, etiquetada como KT Borescope El telfono inicialmente conectado al boroscopio ya no est conectado, normalmente cuando se activa el modo de ahorro de energa del telfono Verde de parpadeo rpido ESTADO INDICADO INDICADOR DE BATERA 5 Durante el encendido inicial del boroscopio, la luz de la batera parpadear 3 veces en verde. Otros indicadores se describen a continuacin:
ESTADO INDICADO COLOR DEL INDICADOR Verde fijo Rojo fijo Verde de parpadeo lento La batera se est cargando, actualmente a un nivel de carga Rojo de parpadeo lento La batera se est cargando, actualmente a un nivel de carga La batera tiene ms del 20% de carga restante La batera tiene 20% de carga restante del20% o inferior superior al 20%
ET20-1390262ART.indd 23 1/24/2019 3:36:01 PM 23 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL INSTRUCCIONES DE FUNCIONAMIENTO CARGAR LA BATERA DEL BOROSCOPIO NOTA: cargue el boroscopio completamente antes de usarlo. La primera carga debe ser de al menos 7horas. Enchufe el conector de cable micro-USB (no se incluye) al puerto de carga USB 6 , enchufe el otro extremo del cable a una computadora, un adaptador de USB a CA u otra fuente de alimentacin USB (no se incluye). Durante la carga, el indicador de batera 5 parpadear lentamente en rojo o verde, segn el nivel de carga (consulte la seccin INDICADORES). Eltiempo de carga normal es de 5 a 6horas. NOTA: utilice solo adaptadores/fuentes de alimentacin USB que cumplan con los requisitos de carga especificados (consulte la seccin ESPECIFICACIONES GENERALES). DESCARGAR LA APLICACIN La aplicacin ET20 es necesaria para propsitos de funcionalidad. La aplicacin se encuentra disponible gratuitamente en Google Play o App Store. Para obtener ms informacin, ingrese al sitio web de Klein Tools en KleinTools.com. www.kleintools.com CONECTAR SU TELFONO AL BOROSCOPIO MEDIANTE WiFi 1. Presione el botn de encendido 1 durante 3segundos aproximadamente para encender el boroscopio. El indicador de WiFi 4 y el indicador de batera 5 empezarn a parpadear. La luz de WiFi parpadear lentamente cuando el boroscopio est transmitiendo activamente una seal de WiFi. Espere a que esto ocurra antes de intentar conectar el telfono al boroscopio. 2. En su telfono, encienda las redes inalmbricas e ingrese al men que muestra las redes disponibles (la ubicacin de este men vara segn el telfono que utilice). 3. Una vez que el indicador de WiFi comience a parpadear lentamente, seleccione
"KTBorescope" en el men del telfono. Si no est disponible, espere 10segundos para asegurarse de que el boroscopio est completamente encendido. 4. Seleccione la aplicacin Borescope de Klein Tools en el telfono. La aplicacin se abrir en el modo Display (visor) con la cmara mostrando una imagen
(consulte la seccin DETALLES DE BOTONES / ICONOS DE LA APLICACIN). 24 ET20-1390262ART.indd 24 1/24/2019 3:36:01 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A INSTRUCCIONES DE FUNCIONAMIENTO NOTA: Si se requiere conectar el telfono a internet, el telfono debe estar desconectado dela seal WiFi del boroscopio. DETALLES DE LOS BOTONES/ICONOS DEL MODO DISPLAY (VISOR) A B D C E I A. Icono en pantalla de foto/video B. Estado de la batera del boroscopio C. Imagen de la cmara D. Ajuste de brillo de luz LED de la cmara E. Icono de configuracin F. Botn para girar imagen G. Botn para tomar foto H. Botn para iniciar/detener video I. Tiempo transcurrido (video) F G H Aspecto del icono durante la grabacin 25 ET20-1390262ART.indd 25 1/24/2019 3:36:01 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL INSTRUCCIONES DE FUNCIONAMIENTO DETALLES DE LOS BOTONES/ICONOS DEL MEN DE FOTOS/VIDEOS J. Pantalla anterior K. Seleccionar archivos L. Men de videos M. Men de fotos N. Men activo
(Fotos o videos) O. Archivos ANDROID iOS N N J J O L 26 N K K M ET20-1390262ART.indd 26 1/24/2019 3:36:01 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A INSTRUCCIONES DE FUNCIONAMIENTO DETALLES DE LOS BOTONES/ICONOS DEL MODO DE GESTIN DE ARCHIVOS ANDROID iOS T T P Q R P Q R S P. Copiar o enviar el archivo seleccionado (opciones adicionales en Android) Q. Borrar archivo seleccionado R. Salir del modo Edicin
(nicamente en modo Edicin) S. Indicador de archivo seleccionado T. Modo Revisin: Nombre dearchivo Modo Gestin: Archivos seleccionados ET20-1390262ART.indd 27 1/24/2019 3:36:01 PM 27 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL INSTRUCCIONES DE FUNCIONAMIENTO ORIENTACIN DE LA APLICACIN EN LA PANTALLA La aplicacin se mostrar en vista vertical u horizontal, dependiendo de la rotacin del telfono. Para cambiar la orientacin de la pantalla de la aplicacin, simplemente gire el telfono 90. Vista vertical Vista horizontal 28 ET20-1390262ART.indd 28 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A La aplicacin se mostrar en vista vertical u horizontal, dependiendo de la rotacin del telfono. Para cambiar la orientacin de la pantalla de la aplicacin, simplemente gire el INSTRUCCIONES DE FUNCIONAMIENTO GIRAR LA IMAGEN DE LA CMARA EN LA PANTALLA DE LA APLICACIN A veces puede ser necesario girar la imagen de la cmara respecto a la pantalla de la aplicacin. Cada toque sobre el botn Girar Imagen F girar la imagen en sentido horario en incrementos de 90. Esto no afecta la rotacin de la aplicacin en toda la pantalla, solo la imagen de la cmara. TOMAR FOTOS Mientras se encuentra en el modo Display (visor), apunte la cmara al 10 objeto que va a fotografiar y toque el botn Fotografa G para tomar una foto. CAPTURAR VIDEO Mientras se encuentra en el modo Display (visor), apunte la cmara 10 al objeto que va a grabar y toque el botn para iniciar/detener el video H . Durante la grabacin de video, se muestra el tiempo transcurrido I , el botn para iniciar/detener el video se encender en rojo y se mostrar el smbolo en forma de cuadrado para detenerla. Para finalizar la grabacin, toque el botn para iniciar/detener el video nuevamente. El botn para iniciar/
detener el video regresar a su apariencia normal. VER Y GESTIONAR ARCHIVOS DE FOTOS Y VIDEOS Para acceder a los archivos de fotos y/o videos, toque el icono de Configuracin E , y luego seleccione el men de videos L o fotos M . Toque un archivo O para verlo. Para gestionar archivos, toque el icono Seleccionar Elementos K para seleccionar el(los) archivo(s). Una vez seleccionados, puede copiar los archivos, enviarlos externamente P o eliminarlos Q . NOTA: a fin de enviar archivos, la conexin Wi-Fi al boroscopio debe estar desconectada en el men de configuracin del telfono. Para salir del modo de Gestin de Archivos, toque el icono Salir del modo de Gestin de Archivos R . 29 ET20-1390262ART.indd 29 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A ESPAOL LIMPIEZA Asegrese de que la unidad est apagada y lmpiela con un pao limpio y seco que no deje pelusas. No utilice solventes ni limpiadores abrasivos. ALMACENAMIENTO Retire las bateras si no va a utilizar la unidad durante un tiempo prolongado. No la exponga a la humedad ni a altas temperaturas. Luego de un perodo de almacenamiento en condiciones extremas que sobrepasen los lmites mencionados enla seccin Especificaciones generales, deje que la unidad vuelva a las condiciones defuncionamientonormales antes de utilizarla. GARANTA www.kleintools.com/warranty ELIMINACIN/RECICLAJE No arroje el equipo ni sus accesorios a la basura. Los elementos se deben desechar correctamente de acuerdo con las regulaciones locales. Visitewww.epa.gov o www.erecycle.org para obtener ms informacin. Google Play y Android son marcas registradas de Google LLC. Apple y App Store son marcas registradas de Apple Inc. SERVICIO AL CLIENTE KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069 1-877-775-5346 customerservice@kleintools.com www.kleintools.com 30 ET20-1390262ART.indd 30 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A NOTAS ET20-1390262ART.indd 31 1/24/2019 3:36:02 PM 31 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A NOTAS SERVICIO AL CLIENTE KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069 1-877-775-5346 customerservice@kleintools.com www.kleintools.com 32 ET20-1390262ART.indd 32 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS MANUEL DUTILISATION Endoscope sans-fil COL DE CYGNE BLIND DE 6PI CAMRA DE 9MM VOYANTS DEL INTGRS BATTERIE RECHARGEABLE AU LITHIUM-ION CONNEXION WI-FI*
AUX iPHONE ET LA PLUPART DES TLPHONES ANDROID
*Application optimise pour:
AppleiOS version6 ou ultrieure Android version4.0 ou ultrieure 9m 3 m IP67/42*
*Camra classeIP67. Botier classIP42. ET20 33 ET20-1390262ART.indd 33 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS CARACTRISTIQUES GNRALES Le ET20 de KleinTools est un endoscope connect au Wi-Fi avec une camra de 9mm
(0,35po) et un col de cygne blind de 1,8m (6pi). La sortie vido est affiche sur les tlphones Android et AppleiOS aliments par un signal Wi-Fi transmis par lendoscope. La sortie de la camra ne peut tre affiche que sur un appareil AppleiOS ou Android laide de lapplication pour endoscope de KleinTools, offerte sur Kleintools.com, GooglePlay et lAppStore. Altitude de fonctionnement: 2000m (6562pi) Humidit relative: <85% sans condensation Temprature de fonctionnement et de charge: -9C 60C (15F 140F) Temprature dentreposage: 0C 45C (32F 113F) Dimensions: 185x58x38mm (7,31x2,3x1,5po) Poids: 567g (20oz) Sortie de camra: 640x480pixels Images par seconde, camra: 25 Longueur du col de cygne de la camra: 1,8m (6pi) Batterie: Lithium-ion, 3,6V/2200mAh (interne) Dure de vie de la batterie: Environ 6heures sans clairage, 5,5heures la puissance lumineuse maximale des voyantsDEL Exigences de charge: 5Vc.c. (maximum), 0,4A (minimum) Conformit: CE, FCC classeB, IC et BC Niveau de pollution: 2 Protection contre les infiltrations:
Botier: Conforme la normeIP42 en ce qui concerne la rsistance Camra: lpreuve de la poussire et hydrofuge conformment la leau et lapoussire normeIP67 Protection contre les chutes: 3m (9,8pi) Les caractristiques techniques peuvent faire lobjet de modifications. 34 ET20-1390262ART.indd 34 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A CONSERVEZ CES INSTRUCTIONS DES FINS DE RFRENCE AVERTISSEMENTS Pour garantir une utilisation et un entretien scuritaires de votre instrument, suivez ces consignes. Le non-respect de ces avertissements peut entraner de srieux risques de blessures, dincendie ou de choc lectrique. Lendoscope, incluant la camra, nest pas isol. vitez dutiliser cet instrument des endroits o des lments conducteurs sous tension pourraient tre prsents. Coupez lalimentation lectrique des zones de travail avoisinantes avant de commencer le travail. vitez dutiliser cet instrument sur des pices en mouvement, qui pourraient entrer en contact avec lendoscope ou la camra et causer des blessures lutilisateur ou endommager lendoscope. Nimmergez jamais compltement la camra dans leau ou des liquides. vitez dutiliser lendoscope pour les inspections sous leau. vitez dutiliser cet instrument des endroits o des produits chimiques pourraient treprsents. Ce produit nest pas destin tre utilis sur des personnes ou des animaux. vitez dutiliser lendoscope prs de sources de chaleur. Assurez-vous davoir les pieds sur une surface stable et respectez les consignes de scurit des chelles, le cas chant. REMARQUE Nutilisez pas lappareil si le port de chargement ou le botier semblent avoir t endommags de quelque manire que ce soit. Cet article ne contient aucune pice rparable par lutilisateur. Nouvrez pas le botier et ne tentez pas de rparer lappareil. Nexposez pas directement ce produit aux rayons du soleil, une source de chaleur, un appareil qui produit de la chaleur ou une temprature extrme. Le botier de lendoscope nest pas tanche. Pour viter que de la poussire et dautres corps trangers ne pntrent dans lappareil, gardez le capuchon en caoutchouc sur le port de chargement lorsque vous ne lutilisez pas. 35 ET20-1390262ART.indd 35 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS CONFORMIT CONFORMIT FCC ET IC Cet appareil est conforme la partie15 des rgles de la FCC ainsi quaux normes CNR dIndustrieCanada portant sur les appareils exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes: (1)cet appareil ne peut causer dinterfrences nuisibles et (2)il doit accepter toute interfrence reue, notamment celles pouvant entraner un fonctionnement indsirable. REMARQUE: Le concessionnaire nest pas responsable des changements ou des modifications qui ne sont pas expressment approuvs par la partie responsable de la conformit. De telles modifications pourraient annuler le droit de lutilisateur dutiliser lappareil. Cet appareil a fait lobjet dessais prouvant quil respecte les limites imposes aux appareils numriques de classeB, conformment la partie15 des rgles de la FCC. Ces limites sont destines fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet appareil gnre, utilise et peut mettre des radiofrquences; sil nest pas install et utilis conformment ces instructions, il peut causer des interfrences nuisibles aux communications radio. Il nexiste toutefois aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si lappareil cause des interfrences nuisibles la rception des signaux de radio ou de tlvision, ce qui peut tre dtermin en teignant et en allumant lappareil, lutilisateur peut tenter de corriger la situation par un ou plusieurs des moyens suivants:
Rorienter ou relocaliser lantenne rceptrice. Augmenter la distance entre lappareil et le rcepteur. Brancher lappareil sur un circuit lectrique diffrent de celui o le rcepteur est branch. Communiquer avec le revendeur ou un technicien expriment en radio/tlvision pour obtenir de laide. NONCS DE LA FCC SUR LEXPOSITION AUX RADIOFRQUENCES:
Cet metteur ne doit pas tre install ou exploit conjointement avec dautres antennes ou metteurs. Cet quipement respecte les limites dexposition aux radiofrquences de la FCC nonces pour les environnements non contrls. Cet quipement doit tre install et utilis en maintenant une distance minimale de 5mm entre le radiateur et votre corps ou les personnes proximit. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpassepas l'intensit ncessaire l'tablissement d'une communication satisfaisante. 36 ET20-1390262ART.indd 36 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A CONFORMIT INFORMATIONS DE LA FCC SUR LEXPOSITION AUX RADIOFRQUENCES (DAS) Cet appareil rpond aux exigences gouvernementales en matire dexposition aux ondes radio. Cet appareil est conu et fabriqu pour ne pas dpasser les limites dmission pour lexposition aux radiofrquences fixes par la Federal Communications Commission (FCC) du gouvernement des tats-Unis. La norme dexposition pour les appareils sans fil utilise une unit de mesure connue sous le nom de dbit dabsorption spcifique, ou DAS. La limite de DAS fixe par la FCC est de 1,6 W/kg. Les essais de DAS sont effectus en utilisant les positions de fonctionnement standard acceptes par la FCC, lappareil mettant son niveau de puissance certifi le plus lev dans toutes les bandes de frquences testes. Bien que le DAS soit dtermin au niveau de puissance certifi le plus lev, le niveau de DAS rel de lappareil en fonctionnement peut tre de beaucoup infrieur sa valeur maximale. En effet, lappareil est conu pour fonctionner plusieurs niveaux de puissance afin de nutiliser que la puissance ncessaire pour atteindre le rseau. En gnral, plus vous tes proche dune antenne de station de base sans fil, plus la puissance de sortie est faible. Bien quil puisse y avoir des diffrences entre les niveaux de DAS de divers appareils et divers endroits, ils rpondent tous aux exigences du gouvernement. AVIS DINDUSTRIECANADA AUX UTILISATEURS CANADIENS Cet appareil est conforme aux normes CNR dIndustrieCanada portant sur les appareils exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes: (1)cet appareil ne peut causer dinterfrences nuisibles et (2)il doit accepter toute interfrence reue, notamment celles pouvant entraner un fonctionnement indsirable delappareil. Cet appareil est conforme la norme CNR-247 dIndustrieCanada. Le fonctionnement est soumis la condition que cet appareil ne produit pas dinterfrences nuisibles. Cetappareil numrique de classeB est conforme la norme canadienne NMB-003. Cet quipement respecte les limites dexposition aux rayonnements dIndustrieCanada nonces pour les environnements non contrls. Cet quipement doit tre install et utilis en maintenant une distance minimale de 5mm entre le radiateur et votre corps. Cet metteur ne doit pas tre install ou exploit conjointement avec dautres antennes oumetteurs. NONC DINDUSTRIECANADA SUR LEXPOSITION AUX RAYONNEMENTS:
Cet quipement respecte les limites dexposition aux rayonnements dIndustrieCanada nonces pour les environnements non contrls. Cet quipement doit tre install et utilis en maintenant une distance minimale de 5mm entre le radiateur et votre corps. CONFORMIT DES APPAREILS DE RADIOCOMMUNICATION AUX LIMITES D'EXPOSITION HUMAINE AUX RADIOFRQUENCES (CNR-102) L'nergie mise par les antennes relies aux cartes sans fil respecte la limite d'exposition aux radiofrquences telle que dfinie par Industrie Canada dans la clause 4.1 du document CNR-102, version 5. Tests DAS sont effectus en utilisant les positions recommandes par la CNR avec le tlphone met la puissance certifie maximale dans toutes les bandes de frquences testes sans distance attacher loin du corps. 37 ET20-1390262ART.indd 37 1/24/2019 3:36:02 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS CARACTRISTIQUES DTAILLES AVANT ARRIRE REMARQUE: Cet appareil ne contient aucune pice rparable par lutilisateur. 1. Bouton de mise sous tension 2. Bouton daugmentation de la luminosit du voyantDEL de la camra 3. Bouton de diminution de la luminosit du voyantDEL de la camra 4. Indicateur Wi-Fi 5. Indicateur dtat de la batterie 6. Port de chargement micro USB 7. Capuchon pour le port de chargement 8. Agrafe pour poche 9. Col de cygne de 1,8m (6pi) 10. Camra 11. VoyantDEL de la camra 12. Accessoire de tirage crochet 8 9 5 10 11 4 2 3 1 38 7 12 DESSOUS 6 Indicateur WI-FI 4 Lorsque vous allumez lendoscope, lindicateur Wi-Fi sallume en vert continu pendant quelques secondes, puis commence clignoter lentement pour indiquer la transmission du signal Wi-Fi. Les autres comportements de lindicateur sont dcrits ci-dessous:
COULEUR DE LINDICATEUR Vert continu Vert clignotement lent Lappareil transmet activement un signal Wi-Fi, appel Vert clignotement rapide INDICATEUR DTAT DE LA BATTERIE 5 Lors de la mise sous tension initiale de lendoscope, lindicateur dtat de la batterie clignote 3fois en vert. Les autres comportements de lindicateur sont dcrits ci-dessous:
COULEUR DE LINDICATEUR Vert continu Rouge continu Vert clignotement lent La batterie est en charge, elle est actuellement un niveau de Rouge clignotement lent ET20-1390262ART.indd 38 1/24/2019 3:36:03 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A SYMBOLES AU DOS DE LINSTRUMENT Avertissement ou mise en garde Lire les instructions Tension/
courant c.c. Porter une protection oculaire approuve Ne pas utiliser sur des pices en mouvement DEEE mise au rebut de labatterie INDICATEURS Non isol; ne protge pas contre les chocs lectriques Conformit europenne:
Conforme aux directives de lEspace conomique europen Conforme la rglementation de la California Energy Commission relativement aux systmes de chargeurs de pile (BCS) Indicateur WI-FI 4 Lorsque vous allumez lendoscope, lindicateur Wi-Fi sallume en vert continu pendant quelques secondes, puis commence clignoter lentement pour indiquer la transmission du signal Wi-Fi. Les autres comportements de lindicateur sont dcrits ci-dessous:
COULEUR DE LINDICATEUR TAT INDIQU Vert continu Vert clignotement lent Lappareil transmet activement un signal Wi-Fi, appel Lappareil est connect un tlphone et est actif Vert clignotement rapide EndoscopeKT Le tlphone initialement connect lendoscope nest plus connect, ce qui est normalement le cas lorsque le tlphone entre en mode dconomie dnergie INDICATEUR DTAT DE LA BATTERIE 5 Lors de la mise sous tension initiale de lendoscope, lindicateur dtat de la batterie clignote 3fois en vert. Les autres comportements de lindicateur sont dcrits ci-dessous:
COULEUR DE LINDICATEUR TAT INDIQU La batterie a plus de 20% de charge restante La batterie a 20% de charge restante Vert continu Rouge continu Vert clignotement lent La batterie est en charge, elle est actuellement un niveau de charge gal ou infrieur 20%
Rouge clignotement La batterie est en charge, elle est actuellement un niveau de charge suprieur 20%
lent 39 ET20-1390262ART.indd 39 1/24/2019 3:36:03 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS INSTRUCTIONS DUTILISATION CHARGEMENT DE LA BATTERIE DE LENDOSCOPE REMARQUE: Chargez compltement la batterie de lendoscope avant son utilisation. Lapremire charge prend un minimum de 7heures. Connectez le cble micro USB (compris) au port de chargement USB 6 , puis branchez lautre extrmit du cble un ordinateur, un adaptateur secteurUSB ou tout autre bloc dalimentationUSB (non compris). Lors de la charge, lindicateur dtat de la batterie 5 clignote lentement en rouge ou en vert, selon le niveau de charge (voir la section Indicateurs). Le temps de charge normal varie entre 5 et 6heures. REMARQUE: Nutilisez que des adaptateurs ou des blocs dalimentationUSB qui rpondent aux exigences de charge spcifies (voir la section Caractristiques gnrales). TLCHARGEMENT DE LAPPLICATION Lapplication ET20 est ncessaire au bon fonctionnement. Lapplication est offerte gratuitement sur GooglePlay et dans lAppStore. Pour en apprendre davantage, consultez le siteWeb de KleinTools: KleinTools.com. www.kleintools.com CONNEXION DE VOTRE TLPHONE LENDOSCOPE LAIDE DU Wi-Fi 1. Appuyez sur le bouton de mise sous tension 1 pendant environ 3secondes pour allumer lendoscope. Lindicateur Wi-Fi 4 et lindicateur dtat de la batterie 5 clignoteront. Lindicateur Wi-Fi clignote lentement lorsque lendoscope transmet activement un signal Wi-Fi. Attendez que cela se produise avant dessayer de connecter le tlphone lendoscope. 2. Sur votre tlphone, activez les rseaux sans fil et entrez dans le menu qui affiche les rseaux disponibles (lemplacement du menu varie en fonction du tlphone utilis). 3. Une fois que lindicateur Wi-Fi commence clignoter lentement, slectionnez Endoscope KT dans le menu du tlphone. En cas dindisponibilit, attendez 10secondes pour vous assurer que lendoscope est compltement allum. 4. Slectionnez lapplication pour endoscope de Klein Tools sur le tlphone. Lapplication souvre en mode daffichage et la camra affiche une image (voir la section prsentant les dtails sur les boutons/icnes de lapplication). REMARQUE: Le tlphone doit tre dconnect du signal Wi-Fi de lendoscope si une connexion Internet est ncessaire sur le tlphone. 40 ET20-1390262ART.indd 40 1/24/2019 3:36:04 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A INSTRUCTIONS DUTILISATION DTAILS SUR LES BOUTONS/ICNES DU MODE DAFFICHAGE A B D C E I A. Icne de lcran des photos/
vidos B. tat de la batterie de lendoscope C. Image de la camra D. Rglage de la luminosit du voyantDEL de la camra E. Icne de paramtres F. Bouton de rotation de limage G. Bouton photo H. Bouton de dmarrage/arrt de vido I. Temps coul (vido) F G H Apparence lors de lenregistrement 41 ET20-1390262ART.indd 41 1/24/2019 3:36:04 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS INSTRUCTIONS DUTILISATION DTAILS SUR LES BOUTONS/ICNES DU MENU DES PHOTOS OU VIDOS J. cran prcdent K. Slection dlments L. Menu des vidos M. Menu des photos N. Menu actif
(Photos ou vidos) O. Fichiers ANDROID iOS N N J J O L 42 N K K M ET20-1390262ART.indd 42 1/24/2019 3:36:04 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A INSTRUCTIONS DUTILISATION DTAILS SUR LES BOUTONS/ICNES DU MODE DE GESTION DES FICHIERS ANDROID iOS T T P Q D P Q D S P. Copier ou envoyer le fichier slectionn (options suppl-
mentaires sur Android) slectionn Q. Supprimer le fichier R. Quitter le mode ddition
(uniquement en mode ddition) S. Indicateur de slection defichiers T. Mode de rvision:
Nom du fichier Mode de gestion:
Fichiers slectionns ET20-1390262ART.indd 43 1/24/2019 3:36:04 PM 43 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS INSTRUCTIONS DUTILISATION ORIENTATION DE LCRAN DE LAPPLICATION Lapplication apparat en mode portrait ou paysage, selon la position du tlphone. Pour changer lorientation de lcran de lapplication, tournez simplement le tlphone 90degrs. Orientation portrait Orientation paysage 44 ET20-1390262ART.indd 44 1/24/2019 3:36:04 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A Pour changer lorientation de lcran de lapplication, tournez simplement le tlphone INSTRUCTIONS DUTILISATION ROTATION DE LIMAGE DE LA CAMRA SUR LCRAN DE LAPPLICATION Parfois, il peut tre ncessaire de faire pivoter limage de la camra par rapport lcran de lapplication. Chaque pression sur le bouton de rotation de limage F fait tourner limage 90degrs dans le sens horaire. Ceci naffecte en rien lcran de lapplication, seulement limage de la camra. PRISE DE PHOTOS En mode daffichage, pointez la camra 10 sur le sujet photographier et appuyez sur le bouton photo G pour prendre une photo. CAPTURE VIDO En mode daffichage, pointez la camra 10 sur le sujet filmer et appuyez sur le bouton de dmarrage/arrt de vido H . Pendant lenregistrement vido, le temps coul apparat I et le bouton de dmarrage/arrt de vido devient rouge et affiche le symbole carr darrt. Pour mettre fin lenregistrement, appuyez nouveau sur le bouton de dmarrage/arrt de vido. Le bouton de dmarrage/arrt de vido revient son apparence normale. VISUALISATION ET GESTION DE PHOTOS ET DE VIDOS Pour accder aux fichiers photo ou vido, appuyez sur licne de paramtres E , puis slectionnez le menu des vidos L ou celui des photos M . Touchez un fichier O pour le visualiser. Pour grer les fichiers, appuyez sur licne de slection dlments K pour slectionner le(s) fichier(s). Une fois slectionns, les fichiers peuvent tre copis, envoys en externe P ou supprims Q . REMARQUE: La connexion Wi-Fi de lendoscope doit tre interrompue dans le menu des paramtres du tlphone pour pouvoir envoyer des fichiers. Pour quitter le mode de gestion des fichiers, appuyez sur licne permettant de quitter le mode de gestion des fichiers D . 45 ET20-1390262ART.indd 45 1/24/2019 3:36:05 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A FRANAIS NETTOYAGE Assurez-vous dteindre lappareil, puis essuyez-le laide dun linge non pelucheux propre. Nutilisez pas de nettoyant abrasif ni de solvant. ENTREPOSAGE Retirez la batterie lorsque vous ne prvoyez pas utiliser lappareil pendant une longue priode. Nexposez pas lappareil des tempratures ou un taux dhumidit levs. Aprs une priode dentreposage dans des conditions extrmes (hors des limites mentionnes dans la section Caractristiques gnrales), laissez lunit revenir des conditions dutilisation normales avant de lutiliser. GARANTIE www.kleintools.com/warranty MISE AU REBUT/RECYCLAGE Ne mettez pas lappareil et ses accessoires au rebut. Ces articles doivent tre limins conformment aux rglements locaux. Pour de plus amples renseignements, consultez les sites www.epa.gov ou www.erecycle.org. GooglePlay et Android sont des marques dposes de GoogleLLC. Apple et AppStore sont des marques dposes dAppleInc. SERVICE LA CLIENTLE 46 KLEINTOOLS, INC. 450Bond Street Lincolnshire, IL60069 1877775-5346 customerservice@kleintools.com www.kleintools.com ET20-1390262ART.indd 46 1/24/2019 3:36:05 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A REMARQUES ET20-1390262ART.indd 47 1/24/2019 3:36:05 PM 47 Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/ADwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A KLEINTOOLS, INC. 450Bond Street Lincolnshire, IL60069 1877775-5346 customerservice@kleintools.com www.kleintools.com 1390262 Rev. 01/19 B ET20-1390262ART.indd 48 1/24/2019 3:36:05 PM Dwg Name: ET20-1390262ART Dwg No: 1390262 Rev: B Pkg Dwg Ref: 1290710 ECO No: 31202Color Reference: N/A
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-01-31 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-01-31
|
||||
1 | Applicant's complete, legal business name |
Klein Tools Inc.
|
||||
1 | FCC Registration Number (FRN) |
0025719949
|
||||
1 | Physical Address |
450 Bond Street
|
||||
1 |
Lincolnshire, Illinois 60069
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AI28
|
||||
1 | Equipment Product Code |
ET20
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** G******
|
||||
1 | Title |
Director, Product Design and Development
|
||||
1 | Telephone Number |
847-8********
|
||||
1 | Fax Number |
847-4********
|
||||
1 |
r******@kleintools.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video instrument | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | The device has 20MHz/40MHz bandwidth. Output Power listed is maximum combined conducted power(2*2 MIMO), and the antenna cannot be co-located or operating in conjunction with any other antenna or transmitter. For body worn operation, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 5mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. Highest reported SAR for Body is 1.28 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch
|
||||
1 | Name |
A**** H********
|
||||
1 | Telephone Number |
86 76********
|
||||
1 |
a******@cn.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412.00000000 | 2462.00000000 | 0.2475940 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC