Learning remote control(2pcs can be learn at one time),the steps as follow:
1. Under disarm status, open car door and step on foot brake, turn ACC from OFF to ON for 3 times, finally stop at ON position. LED indicator light uninterruptedly which indicating the system has enter into learning status. Or open car door and step on foot brake, turn on the ACC, press emergency button for 3 times,the system will enter into learning status. 2. Press any button within 10 seconds, siren chirp once indicating the first button has been learned successfully. 3. Repeat step 2 to learn the 2nd remote(siren chirp twice indicating the 2nd remote has been learned successfully); After the 2nd remote be learned successfully, the siren will chirp twice indicating the system is going to exit the state of learning mode. 4. During learning process, turn the car key to OFF position, or no action to remote control within 10 seconds, the system will exit the state of learning mode automatically. At this moment the siren will chirp twice too. When disarm, open the door, turn ACC to ON . Function model Setting/ way to change Siren sound 1 time Siren sound 2 tiems 1Lock 2Unlock 3Trunk release 4door open delay, doom light delay. Press one time press one time Press 2 seconds press
+
2second with marks are the factory settings able disable disable 5seconds disable able disable 30seconds FCC ID: 2ABXP-GPS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment