FCC ID: ORIINTNODEHPV03 Zigbee Module

by: KMW INC. latest update: 2017-05-25 model: INTNODEHPV03

One grant has been issued under this FCC ID on 05/25/2017 (this is the only release in 2017 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked warrantee terms, instructions, drivers, password defaults, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 12
1 ~ 2017-05-25 12

app s				submitted / available
1	User Manual	Users Manual	pdf	1.66 MiB
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		External Photos	pdf
1		Internal Photos	pdf
1		ID Label/Location Info	pdf
1		RF Exposure Info	pdf
1		Cover Letter(s)	pdf
1		Test Report	pdf
1		Test Setup Photos	pdf

exhibit
download
text

User Manual

Users Manual

pdf

1.66 MiB

Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 1 / 14 BJ KIM INNER ANTENNA NODE Test Manual 2017. 05. 02. KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 2 / 14 BJ KIM Document Revision History No 1

-. initial Description Author Page REV. NO Revised Date BJ KIM A0 2017. 05. 02 KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 3 / 14 BJ KIM INDEX 1. DOCUMENT REVISION HISTORY ........................................................................................................................ 2 INT NODE TEST AND TEST PROGRAM D/L USING THE POWER SUPPLY !

. IQ NXN SETTING .................................................................................................................................................. 6 TX TEST ................................................................................................................................................................. 7 RX TEST ................................................................................................................................................................ 10 2. 3. 4. KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 4 / 14 BJ KIM 1. INT NODE TEST AND Test Program D/L Using the Power Supply 1-1. INPUT Power

INT NODE is powered by a Power Supply. current consumption check using the Power Supply

- Power Supply settings DC15V, 0.5A

INT NODEs average power consumption is under 0.45W. Current consumption 3mA1mA

@ 15V 1-2. Change into ISP mode. 1-3. Connect Debug Cable to Z_Deg port(J2). (Use Pogo Pin) 1-4. Execute Device-Programmer MD 2.60 Program.

< Device-Programmer MD 2.60 Execution screen >

1-5. Select the MG2450/2455.

< Device-Programmer Device Setting>

KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 5 / 14 BJ KIM 1-6. Open the RF Test Program to download INT MG245X-KMW_IQVIEWER_V22_PA_Rev02.H00 MG245X-KMW_IQVIEWER_V22_PA_Rev02.H01

- Download only choose H00 file extension. 1-7. Download

< Download complete message >

1-8. Change into Operating Mode KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual 2. IQ NxN Test Setting Setting test environment as under figure 6 / 14 BJ KIM Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by Block Diagram

< Test environment image>

2-1. Connect Ethernet cable to Ethernet socket at IQ NXN device rear. Then Check communication to PC to IQ NXN

< IQ NXN rear >

KN--062 (15.12.21)-0 Company Confidential IQ nxnTEM CELLPCUSBLAN PORTRF1RF2LAN PORTUSBRF IN/OUTRF CABLELAN CABLEUSB CABLE[ ]Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual 2-1. Setting PC's IP as under figure. Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 7 / 14 BJ KIM

< PC IP Setting >

2-2. Execute IQ signal for Zigbee. And Setting Parameter as under figure.

< IQsignal for Zigbee Program Parameter Setting >

A. Connect USB to Serial Cable to Z_Deg port(J2). 3. TX Test 3-1. Connect IQ NXN's RF1 channel to RF output(TEM CELL) using the RF Cable.

KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual 3-2. Execute Tera Term

- serial port as under figure. Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 8 / 14 BJ KIM

: The Top bar Setup -> Serial Port ... selection

< Tera Terms Serial Port Setting>

- Press 'H' key on the keyboard to display the test menu as below..

< KMW TEST MENU >

- Press 'C' key on the keyboard and select channel.

< For example selected 11 channel.>

If press 'M' on the keyboard, Tx will be sent Modulation with IFS.

KN--062 (15.12.21)-0 Company Confidential 9 / 14 BJ KIM Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by

3-3. Execute Tx test using the IQ signal for Zigbee PC Program Setting Input Parameters as under figure.

- RF Input : Left RF PORT

- RF Channel : 20/2450MHz (@ Test Ch. 20CH)

- Max Signal Level : 10dBm

- Trigger type : signal trigger

-.Trigger level : -25dBm

- External Atten : 16dB Measurement Antenna : Flat Type Antenna Coupler (TC-93026A, Maker : TESCOM) DUT position KN--062 (15.12.21)-0 Company Confidential Antenna CouplerTEST FIXTUREWhistle NODE Module Case Ant Coupler < 1.0mmAnt. Coupler TEST FIXTURE W-NODE Module TEM CELL Air DUT Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 10 / 14 BJ KIM

< Tx test measure >

- Compare with the following items to check for defects Items Req'd Spec Remark Transmit Power (Peak Power) Spectrum PSD mask 5dBm Check

[6.9.5]IEEE802.15.4-2006

[6.5.3.1]IEEE802.15.4-2006 Transmit Center Frequency Tolerance 40ppm

[6.9.4]IEEE802.15.4-2006 Error Vector Magnitude 35%

[6.9.3]IEEE802.15.4-2006

< Zigbee Rx Test ChecK List>

- RX Test 4-1. Execute 'vector signal analyzer' as under figure.

< Execute Vector signal analyzer >

KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 4-2. Connect IQnxn's RF2 Channel to device's output. Or Change input parameters(Left RF Port-> Right RF Port) 4-3. Open the zigbee_psdu20.mod file 11 / 14 BJ KIM Setting A section as under figure.

(IEEE802.15.4-2006 -85dBm reference : test environment condiction, External Atten 16dB(Loss offset) -70dBm 4-4. Execute Tera Term And then Setting port. ( 3-2. Reference setting Teraterm) KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 12 / 14 BJ KIM 4-5. Select RF ON/OFF button as under figure, select 'Start' button. then number 1000's Tx data is transmitted to the INT NODE Board..

4-2. If press '2' on the keyboard, can be check transmitted result.

< Tera Term Rx count Output Screen >

- Compare with the following items to check for defects Items Req'd Spec Remark Receiver Sensitivity

-70dBm

[6.5.3.3]IEEE802.15.4-2006

(-85dBm) Packet Error Rate(1000) 1%

[6.5.3.3]IEEE802.15.4-2006 Receiver maximum input level

-20dBm

[6.9.6]IEEE802.15.4-2006

Specified as -85dBm on IEEE802.15.4-2006, Changed to -75dBm considering that the test environment is wireless. KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual FCC compliance Information FCC Information to User Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 13 / 14 BJ KIM This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Including interference that may cause undesired operation. Modifications not expressly approved by the manufacturer could void the users authority To operated the equipment under FCC rules. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter Module FCC ID : ORIINTNODEHPV03 CAUTION : This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. End users cannot modify this transmitter device. Any unauthorized modification could void the users authority to operate this device. This module is limited to installation in fixed applications, and only installed Lighting Fixture. This module can not be attached to other device without Lighting device. IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. KN--062 (15.12.21)-0 Company Confidential Document NO. Project Code Project Name Subject KMWI-A61-E210 L15LT044Z INNER ANTENNA NODE INNER ANTENNA NODE Manual Revision NO. Revised Date 2017.05.02 Written by Page A1 Checked by Approved by 14 / 14 BJ KIM This device is intended only for OEM integrators under the following conditions:

1)The transmitter module may not be co-located with any other transmitter or antenna, 2)OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. KN--062 (15.12.21)-0 Company Confidential

		frequency	equipment class	purpose
1	2017-05-25	2405 ~ 2480	DTS - Digital Transmission System	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2017-05-25
1	Applicant's complete, legal business name	KMW INC.
1	FCC Registration Number (FRN)	0021909841
1	Physical Address	183-6, Yeongcheon-ro, Dongtan-myeon
1		Hwaseong-si, Gyeonggi-do, N/A
1		South Korea

app s	TCB Information
1	TCB Application Email Address	t******@timcoengr.com
1	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1	Grantee Code	ORI
1	Equipment Product Code	INTNODEHPV03

app s	Person at the applicant's address to receive grant or for contact
1	Name	H**** S**
1	Telephone Number	+82-7********
1	Fax Number	+82-3********
1	E-mail	r******@ltalab.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	11/21/2017
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	DTS - Digital Transmission System
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Zigbee Module
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Limited Single Modular Approval
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only and must be professionally installed. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device shall only be connected to devices manufactured by KMW Inc. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product manufactured by KMW Inc. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used with this device must only be the antenna that was tested in preparation with this application. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 20 cm must be maintained between the radiating elements and all persons.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	LTA Co.,Ltd
1	Name	A**** C**
1	Telephone Number	82-31********
1	Fax Number	82-31********
1	E-mail	c******@ltalab.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C		2405.00000000	2480.00000000	0.1420000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details