Visit cubitag.com Location of Push-button Battery Replacement push-button loosen the screw push down Card
USER MANUAL CubiTag is a trademark of Knectek Labs Inc. 2017 Knectek Labs Inc. All Rights Reserved. Made in China Ring your phone by double-clicking here Slide open the battery cover. Cautions CHOKING HAZARD: Small parts, particularly coin cell battery and battery cap. Please use with caution around young children and pets. Cautions RISK OF EXPLOSION: If battery is replaced with incorrect type. Dispose of used batteries according to instructions. Model: CTAG0302 Manufacturer: KNECTEK LABS INC. QUICK START GUIDE 1. Download the CubiTag app from the App Store or Google Play by scanning the QR Code below:
2. Add CubiTag Card by following the instructions on the CubiTag app. 3. Attach CubiTag Card to your items and find them at the click of a button on the CubiTag app, or find your phone by double-clicking the CubiTag Card tracker. SAFETY INSTRUCTIONS To track your items, CubiTag Card requires the app to be running in the background. Make sure the app is running at all times. When the app is not running, CubiTag will send a notification to let you know. When replacing the battery, please replace with coin cell battery CR2016 ONLY. WARRANTY SERVICE Each CubiTag Card comes with One Year warranty service. Consumers requesting repairs under warranty must email support@cubitag.com to obtain a Return Merchandise Authorization (RMA). Please visit cubitag.com/pages/return-policy-warranty for more info. CERTIFICATIONS & APPROVALS FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. Industry Canada (IC) Compliance Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Avis de conformit la rglementation d'Industrie Canada Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CE Compliance Knectek Labs Inc. hereby declares that CubiTag Card conforms with all necessary requirements and EN 60950-1 standards. Model number and manufacturers info can be found on the back of CubiTag Card. Importer: Intretech Hungary Kft Harmat u 208, 1108 Budapest, Hungary