1/11 KOMTRAX Terminal Instruction Manual Model Name TG105 Thank you for your purchasing TG105 terminal. KOMTRAX is a machine management system that uses wireless communications. Read this instruction manual and use your KOMTRAX terminal correctly Operators and service personnel for machines using KOMTRAX should make sure that they read and fully understand this document. Keep this document together with the Operation and Maintenance manual for the machine equipped with KOMTRAX, and read it repeatedly. TG105 2/11 Features/Before using What is TG105 TG105 is a communication terminal which is mounted on a vehicle to form a system together with server application software on the base station side and used to control movement of the vehicle and monitor it from a remote place. Features TG105 uses LTE, UMTS, GSM and GPRS, so it can communicate in a lot of countries that they are used. (A communication contract is required in each place where TG105 will communicate, however.) TG105 has Wireless LAN function to be able to communicate other wireless equipment such as tablet PC. TG105 can connect ethernet network in the vehicle. Before using Since TG105 is a wireless device using radio waves, so it is necessary to obtain authorization and conform to the laws of the country or territory where the machine equipped with TG105 is being used. It can be used only countries where use of it is permitted. For the countries where use of TG105 is permitted, ask your Komatsu distributor. Always contact your Komatsu distributor when exporting or reselling a vehicle equipped with TG105. Note that the radio communication function of TG105 may be turned off forcibly, when the vehicle is out of the countries or areas where use of TG105 is permitted. Before using TG105, you are required to take some procedures such as application for start of use. For details, ask your Komatsu distributor. KOMTRAX system uses wireless communications, so it cannot be used inside tunnels, underground inside buildings, or in mountain areas where radio waves cannot be received. Even when the machine is outside, it cannot be used in areas where the radio signal is weak or in areas outside the wireless communication. There is absolutely no need to inspect or operate TG105, but if any abnormality is found, please consult your Komatsu distributor. TG105 3/11 WARNING In the column with this mark, an item which "can cause a death or a serious injury to a person" is explained. Safety precautions The items to be observed without fail are explained as shown below to prevent an injury to the user and other persons and damage to property. If you do not obey these precautions, neither Komatsu nor your Komatsu distributor can take any responsibility for any problem that is caused or for any loss that results. Injuries and damage which can be caused by wrong use of TG105 are explained as shown below. The types of the items to be observed are indicated and explained by the following icons. In the column with this mark, an item which "can cause an injury to a person or only damage to property" is explained. This icon indicates an item "to be executed without fail". This icon indicates an item "to be prohibited". This icon indicates an item "to be noted". CAUTION TG105 4/11 WARNING Do not install this set to a place where it will be an obstacle to view or operation. Installation of this set to a place where it will be an obstacle to view or operation may cause an accident. Prohibit Never disassemble, repair, modify, or move terminal, antenna, or cables. the communication Neglecting this may cause a trouble, a fire, or an accident. Your Komatsu distributor will carry out removal and installation. Prohibit Do not install this set to a place where temperature rises or lowers extremely or a place where it will receive strong vibration or impacts. Neglecting this may cause a skin burn, a trouble, or a fire. Prohibit Installe the communication terminal at leaset 22cm (8.7 inch) from a operater. For anyone wearing a pacemaker, the radio waves may have an adverse effect on the operation of the pacemaker. Prohibit Use a battery having rated voltage of DC12V or DC24V to supply DC power to this set. Connect this set to external devices correctly and securely according to this manual. Neglecting this may cause a trouble or a fire. This set is designed to be driven with DC power. Use a power supply in the rated range. Neglecting this may cause a trouble. Install the body of this set securely. If the body is not installed securely, it may fall to cause an injury to a person or an accident. TG105 5/11 CAUTION Do not install this set to an outdoor place where it may be exposed to rainwater or seawater. This set can be used only in countries where use of it is permitted. This set is not water-resistant. Since this set has a radio device, it can be used only in countries where use of it is permitted. Prohibit Prohibit Do not pinch, tense, or damage the cables. Use a specified communication antenna. Neglecting this can cause a short circuit or a disconnection, which may cause a trouble or a fire. Prohibit Use a specified antenna. in Take the action given in "LONG-TERM STORAGE"
the Operation and Maintenance Manual for the machine, when putting the machine into long-term storage. Contact your Komatsu distributor before installing a top guard or other attachment that covers the antenna. Even when the key is at the OFF position, a small amount of electric power is consumed by the KOMTRAX terminal. Attachments may cause a trouble of wireless communication. TG105 6/11 FCC/IC Statements NOTICE:
ThisdevicecomplieswithPart15oftheFCCRulesandIndustryCanadasapplicablelicenseexempt RSSs. Operationissubjecttothefollowingtwoconditions:
(1) thisdevicemaynotcauseharmfulinterference,and
(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause undesiredoperation. NOTICE:
ChangesormodificationsmadetothisequipmentnotexpresslyapprovedbyKomatsuLtdmayvoid theFCCauthorizationtooperatethisequipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgenerates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteethatinterferencewillnotoccurinaparticularinstallation. Ifthisequipmentdoescause harmful interference to radio or television reception, which can be determined by turning the equipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures:
Reorientorrelocatethereceivingantenna. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris Increasetheseparationbetweentheequipmentandreceiver. connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. RadiofrequencyradiationexposureInformation:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiatorandyourbody. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. TG105 7/11 Request for correct use Storage Do not store TG105 in a place where it will be exposed to direct sunlight, a place where the temperature is extremely low or the humidity is high, a place where there is much corrosive gas. (If it is stored in such a place, its performance and appearance may be lowered.) TG105 8/11 90mm 160mm Size and Outline TG105 Interface connector (AMP) 125mm 150mm 36mm Connects the power cable and signal lines on the vehicle side. For details, see the specifications of interface connector. SIM card outlet SIM card can insert when rubber cover removed. TG105 9/11 Specifications of interface connector Connector on TG105 side: 174684-2 (Manufactured by TE connectivity) Pin Number Name I/O Remark PWR_IN_GW PWR_CTR_GW GND_PWR_GW
-
In
-
Power supply Start up signal from another controller GND DOS_L_RING Out Start up signal for another controller COMM_ETHER_RX+
COMM_ETHER_RX-
COMM_ETHER_TX+
COMM_ETHER_TX-
In In Out Out Ethernet 100BASE-TX RX+
Ethernet 100BASE-TX RX-
Ethernet 100BASE-TX TX+
Ethernet 100BASE-TX TX-
1 2 3 4 5 6 7 8 TG105 10/11 Specifications TG105 Power source Current consumption Interface Ethernet Digital input Digital output Communication band and Output power DC12V or DC24V (Operating rangeDC10V30V) Communication Enabled400mA Communication Disabled185mA Standby State (Waiting for LTE only)4mA 1ch 100BASE-TX 1ch start up signal from another controller 1ch start up signal for another controller Transmitter:
EGSM850: +33dBm2dB EGSM900: +33dBm2dB GSM1800: +30dBm2dB GSM1900: +30dBm2dB GSM850 8-PSK: +27dBm3dB GSM900 8-PSK: +27dBm3dB GSM1800 8-PSK: +26dBm+3/-4dB GSM1900 8-PSK: +26dBm+3/-4dB UMTS850/1700/1900, WCDMA FDD Bd2/4/5: +24dBm +1/-3dB LTE(FDD) 700/850/1700/1900, Bd2/4/5/12: +23dBm 2dB Wireless LAN Connector Interface Operating temperature Storing temperature humidity Water resistance Vibration resistance Impact-resistant Outside dimensions (mm) Weight Standard: IEEE802.11b/g/n Output power:
IEEE802.11b: +13dBm IEEE802.11g/11n: +11dBm 174684-2 manufactured by TE connectivity
-30+60
-40+80 Under 98% (65) R2 6.8G (5200 Hz) 50G 1659036mm 0.8kg TG105 11/11 Troubles and causes Trouble Possible cause Remedy TG105 cannot communicate. Radio wave does not reach antenna because of obstacle around it. Out of communicable range. Install antenna to place where there are no obstacles. Move in communicable range. SIM card is not inserted. Insert contracted SIM card. Power source is not supplied. Check service power source, GND, and ACC line. TG105 has trouble. Replace TG105. When start up signal line is turned ON, TG105 does not operate. Power source is not supplied. Check service power source, GND, and ACC line. Interface connector pins are wrong. Correct interface connector pins. TG105 has trouble. Replace TG105. TG105