all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
manual 1 26 | Users Manual | 1020.12 KiB | ||||
1 |
|
manual 27 51 | Users Manual | 2.35 MiB | ||||
1 |
|
manual 52 78 | Users Manual | 1.95 MiB | ||||
1 | Parts List/Tune Up Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | Cover Letter(s) | native | ||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | manual 1 26 | Users Manual | 1020.12 KiB |
READ FIRST Read First Thank you for purchasing the EX-10 Helios. Read this manual carefully in order to obtain maximum performance from the unit. Keep this manual handy. How to nd information in this manual Please understand the basic uses of "How to use the transmitter". In addition, please locate the item in the main menu and the function menu to master each function. Please see "Feature" pages to nd out about the new additional functions. Here is an explanation of the new functions. LCD screen and key operation Change menu Indicator and warnings Response mode D.S.C (Direct Servo Control) Multi access port Data pack Trim and sub trim Wheel tension adjustment, phone terminal Notes on application, exportation and modi cation of the products. 1,These products are only for the control of models.
(P16)
(P17)
(P18)
(P19)
(P20)
(P21)
(P22)
(P23)
(P24) 2,If the products are exported from Japan, the prior approval of the Ministry of Radio/Telecommunications is required regarding the country of destination. If these products are re-exported from other countries, it may be subject to restrictions on such re-export and prior approval of government authorities may be required 3,KO is not responsible for any use of this product that is not in compliance with applicable laws and disclaims all responsibility for any modi cation or alteration of the product. Other notes It is illegal to reproduce the contents of this manual without permission. The contents of this manual are subject to future changes without notice. Although every effort has been made to ensure the accuracy of the information contained in this manual, please contact us if you have any questions or if you nd any errors. We cannot assume any responsibility for any damages arising from the use of DRAFT 3 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 4 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x CONTENTS Read first Contents Notes on safe usage Usage of the transmitter Names of parts of the transmitter LCD Screen table Main menu LCD Screen table Function menu How to insert batteries and such How to use transmitter Features LCD Screen and key operation Change menu Indicator and warnings Response mode D.S.C(Direct Servo Controll) Multi access port Data pack Trim and sub trim Steering tention adjustment,wheel extention,phone terminal Response Mode Compatibility Table Main Menu Change menu Add menu Delete menu Move menu Power alarm Option menu Format Option menu LCD contrast Option menu Set buzzer Buzzer tone Option menu Set buzzer Alarm buzzer Option menu Set buzzer Custome tone Option menu Back light DRAFT 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 26 27 27 28 28 29 29 29 29 30 31 CONTENTS Function Menu Model select ET Position auto display Sub trim A.B.S (Acrive Brake System) Throttle speed Throttle punch Throttle curve Throttle brake Throttle high point Throttle preset Throttle acceleration Steering speed Steering punch Steering curve Steering balance Steering travel Automatic start Model copy Model name Memory reset (model clear) Adjust volume Channel select Reverse switch Trim rate Set up Up timer Down timer Lap timer Connecting the reaciever Notes on installing Specfications Description Index Repair Guarantee 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 5 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x FOR THE SAFE USAGE OF THIS UNIT-1 For the safe Usage of this Unit With the nature of radio controlled models, misoperation will result in danger. In order to avoid these circumstances and to use this unit safely, please read the contents thoroughly. Explanation of warnings and signs In this manual, following warnings and signs should be noted carefully. Meanings of warning and signs Danger!
F a i l u r e t o o b s e r v e t h e m a t t e r d i s c u s s e d i n s u c h a n i t e m p o s e s a s e r i o u s t h r e a t o f d e a t h o r s e v e r e i n j u r y. Warning!
Failure to observe the matter discussed in such an item poses a possibility of death or severe injury, and a great likelihood of damage to the equipment or property. Caution!
Failure to observe the matter discussed in such an item poses a possibility of injury or damage to the equipment or property. 6 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u Meaning of picture indications Warning t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Meaning of picture indications Warning!
Be certain to use only KO Propo genuine crystal sets (transmitter and receiver). Other crystals may vary in frequency, which could lead to misoperation or loss of control. Warning!
Prevent metal parts in the model ( Car, or Boat ) from touching caused by vibration. Warning!
Warning!
Warning!
This product is only designed for surface radio control models. Do not use for any other purpose. If a nicad battery pack is used in the transmitter, be sure to charge properly before use. If batteries are not fully charged, the model may run out of control. Be sure to connect all equipments correctly. If connections are loose, the model may run out of control. The vibration may damage the servo and the model may run out of control Warning!
Be sure to install a receiver with thicker double sided tapes. A strong shock or vibration may result in the model running out of control. Warning!
Warning!
Warning!
Do not cut or bundle the aerial wire with other cords. It may result in decreasing the sensitivity of a receiver and may result in the model running out of control. When operating each servo, check that there is no unnecessary force on the push rod. It may damage the servo or increase the consumption of batteries. Be sure to use grommets and to prevent the servo from touching any metal or carbon plates directly. The vibration may damage the servo and the model may run out of control. DRAFT FOR THE SAFE USAGE OF THIS UNIT-2 Notes Before Installation Coution Caution!
Caution!
Be careful not to reverse the polarity of the transmitter and the receiver. Reverse polarity could damage the unit. Be sure to use genuine KO Propo products e.g. transmitter, receiver, ESC and other optional parts. We cannot assume any responsibility for the use of other companies products with this unit. Notes on Driving (Sailing) Warning Warning!
Warning!
Warning!
Warning!
Warning!
Warning!
Warning!
Warning!
When turning on the power switch, be sure that the frequency band is available. The models using the same frequency will run out of control Do not use this unit in thunderstorms. There is a possibility of lightning striking the antenna. Do not use the transmitter in the rain or in a location where water might get on it. The unit may become wet, which causes loss of control. Do not run the model in the following places. Near to other radio control car circuits. (within 3km) Near to people or on the road. The surface of the water where there are actual sized boats. Near to electric wires and communication facilities. In the case of the model running out of control, it will be very dengerous. Do not run the model when you experience difficulties in concentration through tiredness, alcohol or medication. The mis-judgement may result in accidents. Be sure to extend the aerial of the transmitter to full length. The emission of incorrect signals will cause the model to run out of control. Do not allow any plastic parts to come in contact with fuel and exhaution. Doing so causes risk of damage. Be sure to confirm that the model memory is matched to the models currently running. Not doing so may cause the model to run out of control. Warning!
When you make fanctional changes, be sure to stop the engine or disconnect the motor lead wire. Coution Caution!
Always turn on the switch on the transmitter first, followed by the receiver. When turning off the switch, always turn off the receiver first, followed by the transmitter. If you dont follow the correct order, the receiver may get interference and Caution!
Attach a band plate when you operate the unit. Display your frequency clearly to other people. Caution!
Do not touch the engine, motor, ESC where heat is generated. May result in burning. Caution!
Because the transmitter emits high-frequency energy, do not touch the antenna while the transmitter is in use. DRAFT 7 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 8 FOR THE SAFE USAGE OF THIS UNIT-3 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u Warning Coution Danger t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Notes on Driving (sailing) Warning!
Warning!
Caution!
Caution!
In the case of an electric-powered car, be sure to disconnect the nicad battery afterwards. It may cause fire or the model to run out of control in case of the switch being left on. When storing the transmitter, batteries, and models, be sure to keep them out of the reach of children. It may result in damage by chemicals. Be sure to disconnect the battery from the transmitter when not in use for a long time. It may damage the transmitter if you leave the battery in the transmitter for a long time. Do not store the transmitter in the following places. Extremely hot or cold places (+40 , -10 ,). Direct sunshine. Places with high humidity. Dusty places. If you store the unit under these circumstances, it may result in misoperation or damage to the unit. Notes on Charging Nicad Battery and Hydropack (sold separately) Danger!
Danger!
Danger!
Danger!
Danger!
Danger!
Do not short the battery terminals. It is dangerous because it may cause the outbreak of fire or explosion. Never incinerate the batteries. It is very dangerous because they may explode. Be sure to use KO Propo charger and to use correct charging current. (1A) Avoid over charging the battery. Over charging does not only damage the battery, but can cause excess heat build-up and possibly fire, which results in serious accidents. There is a possibility that the auto cut-off function will fail to operate by other companys chargers. In the case of liquid leaking from battery, Avoid eye/skin contact with the liquid. Burns and blindness may occur. Apply large amounts of water and contact a doctor immediately for treatment. Do not apply a big shock to the batteries. It may damage the battery and result in short circuits and possibly a fire. Do not dismantle or modify the battery. Dismantling the battery may cause liquid to leak out and it is very dangerous Do not wet batteries and do not charge wet batteries. It may cause excess heat build-up and damage.. Nicad batteries are recyclable. Please support recycling. DRAFT NAMES OF PARTS OF THE TRANSMITTER Antenna Hook ET1 Lever Throttle speed indicator Throttle A.B.S. indicator Throttle acceleration indicator 9 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Steering Wheel 12x4 LCD Display ET2 Lever BT2 Mode Change Switch High Speed Normal There is a switch in the back when the RF module is removed. Please refer P15 for the details Charging
(-) Minus key
(+)Plus key Jog Dial
(+) Et3 Lever Enter Key Power indicator Back key Power Switch Throttle trigger ET4 Lever ET5 Lever BT1 Factory default setting ET1: Steering trim ET2: Throttle trim ET3: Throttle brake ET4: Steering travel ET5: Not Assigned BT1: Not Assigned BT2: Not Assigned Phone Terminal D.S.C(Direct Servo Controll Terminal) RF Module Multi Access Port DRAFT i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 10 SCREEN TABLE MAIN MENU These screens are displayed when the main menu is opened. Please see each reference page about a detailed operation method after each screen is opened. Initial screen Minus Key Plus Key Change menu Add menu Delete menu Move menu Power alarm Option menu*
Format (note) P17 P26 P26 P27 P27 P28 P29 Jog Dial Enter Key Back Key The menu is displayed when Enter is pressed from the initial screen. The following 11 kinds of settings can be done in the main menu. Change Menu Add Menu Delete Menu Move Menu Power Alarm Option Menu: LCD Contrast Option Menu: Buzzer Set: Buzzer Tone Option Menu: Buzzer Set: Alarm Buzzer Option Menu: Buzzer Set: Custom Tone Option Menu: Back Light Setting Format (note) Use Jog Dial or (+) (-) keys to change each screen. Press Enter key to open each setting screen. Option Menu:
LCD Contrast Option Menu: Buzzer Set:
Buzzer Tone Buzzer Set P28 Back Light P29 P29 P30 Alarm Buzzer Set Custom Tone Editor P29 P29 P31 Option Menu divides into three items when it is opened. In addition, an item is divided into the buzzer settings.
(note) This format is displayed only when the Data Pack is installed. SCREEN TABLE FUNCTION MENU These screens are displayed when the function menu is opened. Please see each reference page about a detailed operation method, after each screen is opened The function menu opens when Jog Dial or (+), (-) keys are operated from an initial screen. 28 kinds of the right are all function menus. All of 28 function menu will be displayed when Master is been set for the menu. In Custom 1 and Custom 2, only the set content is displayed. To display all, please refer Change Menu (P17 P26) and return display menu to the Master. advice Can not return to initial screen. It returns to an initial screen if it keeps pushing the backing key from any screen is displayed. Having assumed that the function name is chosen from the display of the list of the function menu with Jog Dial, and 'Enter' is done opens and respect opens. The following screen will be opened when function name is chosen by Jog Dial or (+), (-) keys then Enter is been pressed. Model Select ET Position Sub Trim A.B.S Throttle Speed Throttle Punch Throttle Curve Throttle Brake Throttle High Point Throttle Pre Set Throttle Acceleration Steering Speed Steering Punch Steering Curve Steering Balance Steering Travel Automatic Start Model Copy Model Name Memory Reset Adjust Volume Channel Select Reverse Switch Trim Rate Select Up Up Timer Down Timer Lap Timer Model Select Throttle Brake Steering Balance Channel Select ET Position Sub Trim P32 P33 P34 P41 P50 Throttle High Point Steering Travel Reverse Switch Throttle Preset P42 P43 P51 Automatic Start Trim Rate A.B.S Throttle Acceleration Model Copy P35/36 P44/45 Throttle Speed Steering Speed Model Name P37/38 P46/47 P52 P53 P54 Set Up Up Timer Throttle Punch Steering Punch Memory Reset Down Timer P39 Throttle Curve Steering Curve P40 P48 P49 Adjust Volume DRAFT DRAFTRAFTR P55 P56 Lap Timer P57 P58 P59 P60 P61 P62 P63 11 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 12 How To Insert Batteries 1 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u How to open the cover.
(1)It moves it in the direction of the arrow of while pushing the part of the arrow of
. How to insert batteries. (option)
(1)The direction is matched to the display of the plus or minus of the dry battery box, and eight AA size batteries are put.
(2)The direction of the terminal of the dry battery box and the terminal of the transmitter is matched and it pushes it into the interior.
(3)The battery cover is closed F u n c t i o n M e n u Do not use AA size Ni-cd or NiMH batteries. The inside of the transmitter corrodes by generating the gas when charging it. t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Facing correct direction How to insert battery pack (option)
(1)The connector is inserted noting the direction as shown in figure.
(2)Insert battery pack and close the cover.
(3)Be careful not to trap the cord. Please attach included sponge to the battery lid when the battery pack is used. About Charging (only for battery packs) Connect AC Mains charger or DC 12V charger (KO Propo products) as shown in figure. The charging time from flat condition is 14-16 hrs for AC Mains charger. Do not charge when dry cell batteries are used. The transmitter is damaged due to the liquid leakage and the explosion when charging it. DRAFT How to Insert Batteries 2 About Discharging Battery Pack Please note the battery pack can not be discharged using charging jack. Please remove battery pack from main unit for discharging. Color Pad and Replace Grip How to remove pad or grip. After it pulls it in the direction of an arrow lower (2), the pad removes fingernail (1) After expanding lower side (3) outside, the grip pulls the whole in direction (4) of the arrow. How to attach pad or grip. It does in the reverse order of the removing procedure. The lower side is done in the slide after the fingernail of (1) is previously encased of the pad, and it pushes it. The grip does the whole in the slide and pushes the fingernail on the side in six places in pushing total into the case. If it is not easy to enter, it pushes it by a minus driver etc. noting that the case is not damaged. Finally, push the guide pin that exists in the part of the arrow of (3) into the case. Pad Grip Changing the RF Module and Crystals Change the RF Module for changing the frequency range. Change the crystals for changing the frequency. (band) Be sure to turn off the switch when you change the RF Module or crystals. Insert the crystal properly. RF Modu Crystal When changing the crystals, be sure to use genuine FM-type transceiver crystals from KO Propo. Crystals from other manufacturers may operate at slightly different frequencies, resulting in loss of control. Only the RF Module for EX-10 Helios can be used. DRAFT 13 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 14 How to Use Transmitter-1 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Preparation Insert dry cells or battery pack into the transmitter (P12) Be sure to charge battery pack before use. advice The battery will last long if crystal is pulled out or the RF module is detached when only the transmitter is operated. Moreover, when only the transmitter is operated when the management of the band is done in the course etc. , it is similar. (Please refer P20 D.S.C page) Switching the Power On A blue power indicator at the right of the main body lights when the power of the transmitter is on and the LCD display is displayed with the start sound. Changing the display or settings. In case of LCD contrast is too blight or too dark. Open the main menu and then open the CONTRAST from OPTION to adjust. Reference page P29 Changing the setting of the backlight of the LCD.
(The backlight is [Auto] at factory default.) Open the main menu and then open the BACK LIGHT from OPTION to set up. Want to change pitch of the buzzer beep or change the melody. Open the main menu and then open the BUZZER from OPTION to set up. Reference page Reference page P28 P31 P29 P30 Change settings of operations. Change operation mode of response. Use Mode Switch (detach RF module from main body) and CH.SELECT of function menu (P57). Reference page P19 Change function assignment of ET lever or BT button. Open the function menu and perform SET UP. Reference page P60 The buzzer sounds if it doesn't operate it for a long time. I want to change this setting. Change the setting of POWER ALARM of the main menu. At shipment from factory the alarm will sounds when the unit does not operate for more than 3 minutes. Reference page P28 Change the menu list of initial screen that it is displayed when Jog Dial or (+), (-) keys are operated. Other than MASTWER, it can be changed to CUSTOM 1 or CUSTOM 2 which you can change display items by yourself. Reference page P17 How to Use Transmitter-2 Operation concerning memory. Reset a specific model memory to factory default setting. Select MEM.RESET from function menu and press enter. (Current model memory will be initialized.) Transferring model memory setting to other model memory. Select MODEL.COPY from function menu and press enter. Please execute the format in the main menu when you use the Data Pack. The format appears to the menu only when the data packing is installed. Use the optional feature. I want to set it up without emitting signals from the transmitter. DSC function can be used connecting DSC cable (option) to the DSC port.(D.S.C=Direct Servo Controller) It comes to be able to operate it by the power supply's entering by inserting DSC Jack in the DSC port. Want to list many functions for set up. Want to record more than 25 setting up data. Want to edit custom tone by the PC. If you use the interface adaptor and the PC interface for MAP Multi Access Port (optional) Most settings of the main unit of the transmitter can be done with PC, and the setting of the transmitter side be preserved in PC. Reference page P55 Reference page P53 Reference page P22 Reference page P20 Reference page P21 15 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 16 ABOUT THE OPERATION OF THE LCD SCREEN t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u n this machine, assume most settings to be an operation system thirdly, that is, Jogdial and the
"Enter", "Back" key possible to enable an intuitive operation. Moreover, the change menu system that can efficiently use it with more set screen is newly adopted. Name of key Names on Initial Screen Minus Key Plus Key Jog Dial Present model memory number and model name. Power-supply voltage Menu list that has been selected. Operation timer
(adjusting time display) F u n c t i o n M e n u Back Key Enter Key Each keys can be operated by pressing. Jog Dial can be operated by rotating left or right. From an initial screen Enter key: The main menu opens when "Enter" is pushed. Back key: Nothing happens.
+.- keys: The function menu will open. Jogdaial: The function menu will open. Press +.- keys together: Reset Operation timer t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x A key function, besides an initial display Enter key: It is a key that mainly to select and to decide. Back key: Mainly, use it when it cancel or it returns to the previous screen.
+.- keys: Use it to increase or decrease a movement and the set value(figure) Jog Dial: Can be used like +.- keys but a quick operation can be done Press +.- keys together: Reset a value of settings. (however it is not for all functions) Main menu It is a menu that opens when "Enter" is pushed from an initial screen. Mainly, the setting related to the system can be set. The content set by this menu is not independent in each model memory. Page mark About Page mark There is a content of the display below. There is a content of the display above and below. It is likely to be displayed not only in main menu but in function menu. There is a content of the display above. Function menu This is a menu that opens when Jog Dial or +.- keys is operated from Initial Screen.The position that opened last time is memorized while the power supply has been turned on. Set an independent content for each model memory. Although there are lots of functions, the displayed function is customizable by the menu list switch (Page 17). (Change Menu System) DRAFT Change Manu In this unit, to use a lot of functions, Change Menu System is developed, and installed newly. This is the one that it is made to be able to do by quickly calling practicing more operation by switching Menu List that registers only the function to often use. About Change Menu By registering the content squeezed to CUSTOM1 or CUSTOM2 from a lot of function menu items, the switch is
..function item.. quick and it is made to be able to do. For instance, CUSTOM1 is a lot of items used for the practice CUSTOM2 registers the item for the race. The switch of the item used can be easily made by three actions. (Enter, Jog, Enter) If Master is used, all items are displayed. Unregistered items functions are also effective. (Just not displayed) Change Menu Procedure It is an explanation of the procedure for switching actually. Select the menu that you want to display in the main menu. Press the enter key from the initial screen to display main menu. MASTER is using Following three menu items MASTER, CUSTOM1 and CUSTOME2 will be displayed at the first screen of main menu. Select the items you want to use by Jog Dial or +.- keys then press enter. 17 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n The screen returns to an initial screen, the name of function menu is been changed to the name that selected. Changed to CUSTOME1 In the example of the display, it switches from MASTER to CUSTOM1. Please see main menu P26 about detailed operation methods such as the item additions and editing each menu. advice advice Can not return to initial screen. Whatever the display screen is, it returns to an initial screen if you keep pressing back key. Can not select CUTOM2!
CUSTM2 can not be selected at factory default settings because there is no items are registered. I can be used if you register or add items in the menu contents. (Add menu P26) DRAFT D e s c r i p t i o n I n d e x Indicator warning About the display of each indicator. Throttle A.B.S Indicator Throttle Acceleration Indicator Throttle Speed Indicator 18 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u Power Indicator F u n c t i o n M e n u Because three indicators other than the power indicator flashes regardless of a set value when it is turned on with ET and the button, it is not limited that the function works. Warning Display Throttle Speed Indicator When Throttle Speed (P37) is effective, it flashes. Moreover, the function of On/Off of Throttle Speed is allocated in ET and the button, it flashes too. Throttle A.B.S. Indicator When Throttle A.B.S (P35 36) is effective, it flashes. Moreover, the function of On/Off of the Throttle A.B.S. is allocated in ET and the button, it flashes too. Throttle Acceleration When Throttle Acceleration (P44) is effective, it flashes. Moreover, the function of On/Off of the Throttle Acceleration is allocated in ET and the button, it flashes too. Power Indicator When the power is turned on, it lights.And It flashes when the voltage drops below 9V.
(battery alarm) t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Battery Alarm This is displayed when the power supply voltage drops about 9V or less. The character of the BATTERY ALARM flashes. The power indicator flashes. The alarm buzzer sounds. And the backlight is compulsorily turned off. VOLTAGE of LCD keeps flashes though it returns to an initial screen for any key operation. After it returns to an initial screen, Flashing VOLTAGE and Flashing power indicator are released if the voltage is more than the warning voltage for one minute. Data Pack Error It is displayed when there is something wrong with the Data Pack while using it. DATA PACK ERROR!! flashes. After any key is operated, Model 0 is displayed. Please see model selection (P32) about the display of model memory 0. When malfunction happens to the access of the memory, it is displayed. Memory Error MEMORY ERROR!! flashes. After any key is operated, model memory (model memory 1) will operate at initial condition. If the power is turned on again and it is normal, it operates by an original setting. If this message does appear frequently, send the transmitter to our service department for repairs. Power Alarm The alarm sounds when time that nothing is operated exceeds set time. It will set it in three minutes at factory setting. The time can be set at Main Menu: Power Alarm (P28) The sound of alarm can be set at Main Menu: Option: Buzzer (P29) DRAFT Movement mode (Responce mode) This Unit can select from 3 mode. to change the mode adjust the switch below of the RF module. and adjust the channel select in function mode. 19 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 20 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 21 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 22 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 23 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 24 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT Response Mode Compatibility Table Response Mode Compatibility Table Normal Super High Speed Advanced High Speed Compatible Incompatible Receiver KR-297FZ(Discontinued) KR-301F KR-302F Analog Servo Digital Servo ESC PS-401 PS-712FET PS-713FET PS-2173FET PS-2174FET PS-2113FET PDS-947FET PDS-2123FET PDS-2143FET PDS-2144FET PDS-2343FET PDS-2344FET EZ-1000 KSC-1000FR KSC-1100FR KSC-1200F VFS-2000 VFS-2000J Others Fail Safe Adapter(FSA-1) 25 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT Main menu (1) It is the menu displayed when "Enter" is pushed from the initial screen. Change menu system Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset The first screen of the main menu becomes a selection of the change menu system. Displayed MASTER, CUSTOM1, and CUSTOM2 are name of the menu screen respectively. It is selected by pushing "Enter" after it moves to the menu name you want to select the cursor with Jogdial or the +.- keys, and the display returns to an initial menu. The menu is not changed when returning to an initial screen by pushing the back key. 26 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i i M M a a n n M M e e n n u u F u n c t i o n M e n u to Menu addition The menu name does the blinking display if not registered in each menu at all and it is not possible to select it. In the state of the first stage, as for CUSTOM1, only MODEL.SELECT is registered. In the state of the first stage, CUSTOM2 is empty.(It is not possible to select it.) t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n Menu addition Add the item to the menu list. It is possible to add it to CUSTOM1 and CUSTOM2.(It is not possible to add it to MASTER.) Menu name selection Select the added menu name. Move the cursor to either of CUSTOM1, CUSTOM2 with Jogdial or the the +,- key and push "Enter". Function name selectin The function name that wants to be added and push
"Enter".. D e s c r i p t i o n I n d e x The added function name is a list of the right. however, the one registered in the menu list is not displayed MODEL SELCT ET:POSITION SUB:TRIM ABS TH:SPEED TH:PUNCH TH:CURVE TH:BRAKE TH:HIPOINT TH:PRESET TH:ACCEL ST:SPEED ST:PUNCH ST:CURVE ST:BALANCE ST:TRAVEL AUTO:START MODEL.COPY MODEL.NAME MEM.RESET ADJUST VR CH.SELECT REVERSE TRIM RATE Additional position Decide the position where the function selection with Jogdial or the +, - key is inserted and push "Enter". Insertion is fixed, and the screen returns to the selection of the function name of two. It is possible to add it continuously by repeat. Push the
"Back" key when stopping it.(Or, jump to an initial screen at dash when the "Back" key and "Enter" are pushed at the same time.) It becomes the order.
(Displayed on the right) DRAFT Selected CUSTOM1 Selected SUB:TRIM SET UP UP TIMER DOWN TIMER LAP TIMER SUB:TRIM has been selected on this screen. It tries to insert SUB:TRIM after ET:POSITION on this screen.
1 | manual 27 51 | Users Manual | 2.35 MiB |
Main menu(2) It is the menu displayed when "Enter" is pushed from the initial screen. Menu deletion Delete the function from the menu list. CUSTOM1 and CUSTOM2 can be delete.(It is not possible to delete MASTER) Select list name Select the added list name. Move the cursor to either of CUSTOM1 or CUSTOM2 with Jogdial or +/- key and push "Enter"
Select function name The cursor moves with Jogdial or the +/- key. Select the function name that needs to be deleted and push
"Enter". Even if the deletion ends, it is possible to delete it continuously. Back Key Enter Key JogDial
+/- Key Reset 27 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT MAIN MENU (3) Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset 28 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i i M M a a n n M M e e n n u u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT MAIN MENU (4) It is the menu displayed when "Enter" is pushed from the initial screen. CONTRAST (LCD Contrast) Adjust contrast of LCD display. Use "Jog dial" key or "+,-" keys. to adjust contrast of LCD display. can adjust contrast at 8 stages. Adjusting the contrast to a very light setting in a high temperature room may cause characters to become invisible at low temperatures out doors. please be careful. Back Key Enter Key JogDial
+/- Key Reset 29 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s BUZZER Setting about the buzzer sound which a system sounds. Three setting about a buzzer. BUZZER TONE Adjust An interval of a buzzer. An interval of normal beep sound changes. ALARM BUZZER A buzzer sound sounds in various Sheen, but it is setting about that buzzer sound CUSTOM TONE Can edit or create the tone. BUZZER TONE Jog Dial or +,- keys to adjust the interval of the buzzer. ALARM BUZZER Push "Enter" key at each item, cursor will change from after change cursor use Jogdial or +,- keys to change the setup. Up Timer Lap Timer Down Timer Power Alarm SYS: System default tone CS1: Custom Tone 1 CS2: Custom Tone 2 CS3: Custom Tone 3 CS4: Custom Tone 4 CS5: Custom Tone 5 CS6: Custom Tone 6 UP.T LAP.T UP Timer Lap Timer DOWN.T Down Timer Battery Alarm POWER Power Alarm BATTERY Battery Alarm STARTUP Startup Startup DRAFT i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x MAIN MENU (5) Custom tone editor Back Key Enter Key JogDial
+/- Key Reset Move the cursor to the custom(1 to 6), using Jog Dial or "+,-" keys. In this example there is no data yet. Use Jog dial or "+,-" keys to choice the sounds. and push Enter key. (A to Z.see down for details) Cursor move to the next row to choice the lenght of the sounds. (1 to 8) When push Enter key, cursor will move to next line. Push reset key (push + and - keys Together) to clear the data after the cursor. A real interval and relation with indication seem to become follows. 30 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Back to select number Change data pointing cursor Return to Select number The upper part is an interval. The lower part is length of a sound. Return to Select number Display the position of sounds now. Return to Select number Interval Name of musical pitch LCD indication In LCD indication.
(Point) means Long silence (a rest). Length of a sound Note LCD indication Length of each note is fixed. Tempo become
=120 The input example DRAFT MAIN MENU (6) This is the menu displayed when "Enter" is pushed from the initial screen. BACK LIGHT Set the lighting method of the backlight. Can choose from "AUTO" and "OFF". Back Key Enter Key JogDial
+/- Key Reset Change Setting Setting will change when you pushed Enter key or Back key. AUTO: lighting the display When key function was done. or, when "auto display" are active. When didn't operate any key, the light will be off. (around 3 sec.)
(Factory default is AUTO.) OFF: Back lights are always off. 31 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u Setting of backlight doesn't turn on even "Auto". besides a Function Key, ET lever, BT button. F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 32 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset MODEL SELECT Select model memory Can save the setting for 9 car
[How to open the screen]
Use Jog dial or "+,-" keys to select MODEL SELECT at function menu. then Push "ENTER" key In MODEL SELECT Screen. Control Jog dial or +,-
keys to move the cursor at left side Push Enter at the MODEL number to select. Back to function menu with out any changes when push BACK key. Can put a name at Model memory (max 10 character) Memory of unit display at 1 to 9. A to P for Data Pack. It is usable to assign each car the each number. Even same car, can change the Setting every course. It is cause of out of control when Changing Model memory while running. Model memory 0(Zero) Model 0 will display when do this control as follow. When model memory in data pack was used, and it was switched off, and data pack was pulled, and it was switched on When remove the DATA PACK while using MODEL MEMORY of DATA PACK Model memory 0 use for avoid Lost the data Model memory 0 use for avoid Lost the data Do following procedure to back to Ordinarily MODEL MEMORY. don't come back unless this operation is done Use Model select function to change to other Model memory
(Data in Model memory 0 will lost) Copy the Setup of MEMORY 0 to other memory by MODEL COPY (page 53) advice Setup at Function menu. that can save at MODEL MEMORY Can not set per Model memory the setup at main menu (see page 26). ET POSITION Confirm Position of ET rever. Can con rm the function name and value of setup Can not adjust the setup from this function.
[How to open the screen]
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Select ET POSITION then push ENTER. At ET POSITION they displaed function name assigned and the value of each setup. Push BACK key to return to initial screen. Back Key Enter Key JogDial
+/- Key Reset 33 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Can change the assigned button to other button when use SET UP function (see page 60) When control the ET. The Auto display will activate, AUTO DISPLAY DIRECT SET When the lever which a function is assigned to is controlled, contents are displayed automatically. If a function is assigned to an ET lever, control contents of a controlled lever are displayed automatically.
[Sample]
ET1 : Display Steering Trim. ET4 : Steering Travel. An original screen is returned to in about 3 seconds Push BACK key to returened to original screen. AUTO DISPLAY didn't function when display the MAIN MENU (see page 26) AUTO DISPLAY didn't function when display the SET UP (see page 60) Can adjust the Steering balance to Push ET that assigned Steering trim then control the steering to right or left. it's call Direct set. advice When persentage is . the function was not working sample: Steering travel is Steerring wheel not working In this case. i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x SUB TRIM Adjust the steering and throttle can not put to the center point of neutral position of servo, when only using the linkage of car.
[How to open the set-up screen.]
Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset 34 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F F u u n n c c t t i i o o n n M M e e n n u u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. The cursor will change from to Push + and - keys together to reset the value to . Adjust the value using by Jog dial or +,- keys. Push Enter or Back key to done the setup. Push Back key to return to Initial screen. What is sub trim Usually set the neutral of servo when put at car the servo, then adjust linkage. Use Sub trim to fine adjustment Different of trim and sub trim Sub trim are not only the center point of servo, it is changed also the movement angle. SubTrim Trim
(Center Trim) See page 23 for more details advice When getting bigger the value of sub trim please adjust the linkage and make it smaller the value of sub trim. DRAFT A.B.S (Active Brake controll System) 1 Pumping brake will activate, when use brake at throttle. Foil locks it with brakes and is effective when posture of a car collapses. As a result, a corner ring gets possible to be done smoothly. Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
35 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ABS" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. ABS indicator get blink. when ABS are active. Can adjust the 5 parameter in ABS function. Full brake are depend on to throttle brake (see Page 41). ABS Indicator DRAFT i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 36 A.B.S (Active Brake controll System) 2 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u ABS width and position Set pumping ABS movement will change at Control volume of throttle trigger and position of width. Base at Position of throttle triger. when width are 100. the servo move back to position to set, The servo didn' move back to point to set when make small the value of width. Time Brake Max Operating Operating Trigger Trigger Neutral Time Braking The movement of servo getting bigger, when the value at position setup are small. Brake Max Servo Servo movement movement BS doesn't function When set 0 to width, and then set position to 100. Neutral Pos (beginning) A B A : B=Duty Cycle Setting ABS.WIDTH ABS.POS 50 30 Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset N Width ABS Cycle Set cycle of pumping action. When make large the value. the servo move fast and cycle become short. F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n ABS Delay Set delay of ABS Action. Make strong the brake when put the delay at this function ABS Duty Set ratio of time to brake and time to release the brake with 7 stages. advice It will be easy to understand when servo connected instead of ESC at throttle channel. ABS function. it is depend at specification of servo. D e s c r i p t i o n I n d e x DRAFT TH SPEED (Throttle speed) 1 Reaction velocity of a throttle is made late. It to slow the changes of signal, to make easy to controll the car.
[How to open the set-up screen.]
Initial screen Function menu TH SPEED Setup of SPEED and POSITION will change on setup of MODE. In 1 WAY. can not select POSITION. Indication of TH.POS changes by a position of trigger Indication of TH.POS changes by a position of trigger DRAFT DRAFT Back Key Enter Key JogDial
+/- Key Reset 37 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 38 TH SPEED (Throttle speed) 2 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Throttle speed When control the throttle quickly, the car might be out of control. Use this function to limit the throttle speed. In this function can set Speed, Position, Mode. The Speed and Position setup will depend at mode setup. This function will effect when pull the trigger. It is not effective for Brake control. Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset MODE Choose from 1 to 3 WAY 1 WAY: Use full area for the throttle trigger control 2 WAY: Divide to 2 areas the throttle trigger control 3 WAY: Divide to 3 areas the throttle trigger control POSITION Set the divition of area The value of Position 1 are always same or smaller then position 2. SPEED Set each speed of each area A setting item changes by setting value Normally 100 is the Setting value. when make it smaller the value reaction of servo getting smaller too. Throttle Speed Indicator i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x When controll trigger position will appear If throttle trigger are active the throttle indicator will blink Can set at ET the speed of each aria (see page 60) The value can set at ET are when set TH:SPEED at 100%
Can assign ON/OFF function at ET or BT button. Even the value are not effective the light will be blinking when ON the function. advice As same as Engine car, This function are functioning also at The Electric car that using ESC. DRAFT TH PUNCH (Throttle punch) To adjust only an initial reaction of throttle. When move the throttle to forward or to brakes. can skip the first field. Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
When Push "Enter"
at each Item . the cursor change to . 39 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:PUNCH" from Menu list. and then push "Enter" key. F u n c t i o n M e n u i M a n M e n u Use Jog Dial or +,- keys to choice F(forward) or B(Brakes). then push "Enter"
to cursor change from to keys.To reset. When cursor display
. and can adjust the value using Jog dial or +,-
, push +,- keys toghter. Push "Enter" key. the cursor return to . When push Back Key after that the display will return to menu list. Setting value of throttle punch is in proportion to initial movement. but when use combination of other setting, the throttle will move like a switches between two points. When using combination with ABS function, please check the movement carefully before use. This function are useful to avoid time-lag of clutch meet at Engine car. Can put the initial punch to Forward and backing of ESC, in electric car. 1 0 0 0 5 S e r v o M o v e m e n t t i n g S e t g e t ti n S e ttin g S 0 Triger operation Neutral Half Full Throttle advice This function are useful to avoid time-lag of clutch meet at Engine car. Can adjust starting point of brakes of engine car. Can put the initial punch to Forward and backing of ESC, in electric car. DRAFT t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 40 TH CURVE (Thorottle curve) Put the curve on actual servo operation to the trigger operation of the throttle. In throttle operation, can be made quick or mild by hanging a curve to a signal. Besides, can brakes made quick or mild by hanging a curve.
[How to open the set-up screen.]
t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Back Key Back Key Enter Key Enter Key JogDial JogDial
+/- Key
+/- Key Reset Reset i M a n M e n u F F u u n n c c t t i i o o n n M M e e n n u u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:CURVE" from Menu list. and then push "Enter"
key. Push Enter key to start setup the Thorottle curve. When push Enter key at F(Forward) or B(Brakes), cursor change
. then can adjust the value using by Jog dial or +,- keys. to
+100 Setting Quick S e r v o M o v e m e n t Mild Trigger operation Neutral Half Full Throttle Setting value : + makes quick - makes mild. Quick curve : sensitive at initial response Mild curve : insensitive at initial response advice When other functions are used together, please set up while confirming movement. Only the curve can adjust at this function. to adjust throttle punch (Page 39) to be make bigger the initial movement . DRAFT TH BRAKE (Throttle Brake) Adjust only the brake of throttle. Adjust only the brake of throttle. maximum brake will change.
[How to open the set-up screen.]
Back Key Enter Key JogDial
+/- Key Reset 41 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s To Adjust the movement of servo, of the time that push the trigger. From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:BRAKE" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys, to adjust the value.. When make large the value at Engine car, a burden of Servo to increase. please check the movement while adjust the value. In Electric car, When set value is too small the amplifier can not show better performance. Please start from 100 (factory setting) the setup. This function can be assigned and adjusted to ET lever. but It becomes a relative value over the value set up on this screen. (It is assigned to ET-3 at the time of factory shipments.) Keep in mind that a brake does not work even if it enlarges a numerical value, when a setup is 0. When assigning ET lever, the contents of operation are automatically displayed only by operating a lever.
(AUTO Display) and Keep in mind that a brake does not work even if it enlarges the numerical value of this function, when a setup with ET lever is 0%. Minimum value are 0, but doesn't operate to braking. advice Can change the assigned button (ET-3) to other button when use SET UP function
(see page 60) DRAFT i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 42 TH HIPOINT (Throttle high points) Set only the value of forward movement, on the throttle. Set only the value of forward movement on the throttle. use this function. Electric car use Highest point of ESC. Engine car use "High"
[How to open set-up screen]
t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Back Key Enter Key JogDial
+/- Key Reset i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x To Adjust the movement of servo, of the time that pull the trigger From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:HIPOINT" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. Set only the value of forward movement on the throttle. It is easy to set up especialy on Engine car. When make large the value at Engine car, a burden of Servo to increase. please check the movement while adjust the value. In Electric car, When set value is too small the amplifier can not show better performance. Please start from 100 (factory setting) the setup. Minimum value are 0, but doesn't operate to forward. advice Throttle trim is a center trim.When made small the value of "TH HIPOINT". and then, when set large value to an advance direction of the trim.the amount of operation extremely will be small.(Please see page 23 about Center trim) DRAFT TH PRESET (Throttle Preset) Move the throttle servo to set point, using by ET or BT button. Use this function to set at ET or BT button. Can move at point you set when control the button assigned.
[How to open the set-up screen.]
Back Key Enter Key JogDial
+/- Key Reset 43 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list. use "Jog dial" key or "+,-" keys. to choose the "TH:PRESET" from Menu list. F u n c t i o n M e n u The range can setup 0 to F150 and 0 to B150 Other function for the throttle are not affected by this function. (If set at F100 when control ET or BT button, the throttle will move to the set point, even TH:HIPOINT are 0.) It is useful for Engine cut, Idling up, Full brake, Move Backward Trigger will not function and throttle is fixing at point while controlled the ET or BT button that assigned as preset. Please check the movement before use, to avoid lost control. DRAFT t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x TH ACCEL (Throttle Acceleration) 1 Set a awing at forward part of throttle. The expert driver using Delicate throttle work. In this function do automatically to make faster the cornering of the car
[How to open the set-up screen.]
Push enter at each item to change the cursor Back Key Enter Key JogDial
+/- Key Reset 44 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TH:ACCEL" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. Time Maximum Operating Operating Trigger Trigger Neutral Time Maximum Servo Servo movement movement Neutral Pull the triger PosH Width PosL If you set this fanction that POS L 10 POS H 80 the effect shown Cycle Accelaration are off When WIDTH set at 0. Accelaration are off when POS.LOW and POS.HIGH are same Indicator will blinking when on the throttle accelaration. Throttle Accelaration Indicator DRAFT TH ACCEL (Throttle Acceleration) 2 Setting Item Set the swing width WIDTH(Width) POS.LOW(Low Position) Set the lower part of throttle trigger for swing action POS.HIGH(High Position) Set the upper part of throttle trigger for swing action CYCLE(Cycle) Set the cycele of swing action Range of setting value Back Key Enter Key JogDial
+/- Key Reset 45 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Setting Item Maximum Minimum Initial value ACCEL.WIDTH ACCEL POS.LOW ACCEL POS,HIGH 100 100 100 ACCEL CYCLE 100 0 0 0 1 0 5 50 97
(Can not set higher value than POS.HIGH)
(Can not set lower value than POS.LOW) Start swing action, When throttle trigger was position between POS.LOW and POS.HIGH. Set the swing width at WIDTH. This function can adjust during running, when assign it to ET (from ET1 to ET5) the "WIDTH" (set the "WIDTH" to 100)
"CYCLE" can adjust during running the cycle of swing action When assign this function to ET (From ET1 to ET5) Can assign to the BT1 or BT2, on/off of functions. When activate on/off at BT button, then even if the setting are not effective (ex. "WIDTH" is 0), The Throttle Acceleration Indicator be flashing. An Ideal setup isn't know till actual run. because it will change in various factors (Servo, Car, road surface, etc.) i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x When set large value at set up, increase Consumption electric currents, It will cause of damage to servo. advice To use ET or BT with other function. Modified at "SET UP" function (page 60). DRAFT t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 46 ST SPEED (Steering speed) 1 Make late the Speed of steering Servo. Limit the Max speed of Steering servo. Can set separately the Turn and Return. Divide between center of neutral and maximum rudder angle. It is possible to set each angle. (2 WAY)
[How to open the set-up screen.]
Back Key Enter Key JogDial
+/- Key Reset From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ST:SPEED" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. It can be chosen between 1 way and 2 way. Displayed contents at "SPEED" and "POSITION" are change by setting value of MODE. Can not set "POSITION"
at 1 WAY mode. Use Steering to move to TURN2. Can change the value, where cursor are pointing. Use Steering to move to RETURN2. TURN1 at bottom row, By steering can change to TURN2. RETURN1 at bottom row, By steering can change to RETURN2 DRAFT ST SPEED (Steering Speed) 2 Time Maximum Operating Operating Wheel Wheel Neutral Time Maximum Servo Servo movement movement Neutral Turning Returning Speed changing point Setting Speed Neutral 1 n r u T The f o e g n a r d e e p s e h T changing point can be adjusted The speed range of End Turn2 Neutral 1 n r u t e R The f o e g n a r d e e p s e h T changing point can be adjusted The speed range of Return2 End Back Key Enter Key JogDial
+/- Key Reset 47 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g Display contents at "1 way" and "2 way" are different by setting item of MODE. 1WAY 1 WAY: become same speed in whole area. Can set each TURN and RETURN speed. In 1way, displayed POSITION but isn't functioning. (Can't be chosen) 2WAY To set the position can assign by two areas. An Ideal setup isn't know till actual run. because it will change in various factors (Servo, Car, road surface, etc.) advice It is totally different about result of this function by speed spec of servo. DRAFT i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 48 ST PUNCH (Steering Punch) Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ST:PUNCH" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. To reset the value Push together "+,-" keys. Push Back key or Enter key to return at menu list. When large the set value, the moving volume become big. Effective at Steering linkage. But Dont improve straightness. 1 0 0 i n g t S e t S e ttin g 0 S e r v o M o v e m e n t Wheel Angle advice When use with other function please check the effect one by one. DRAFT ST CURVE (Steering Curve) Adjusting the steering servo turning angle with the wheel operation. Put a curve in Servo movement against for steering operation. Can set to quick curve or mild. curve.
[How to open the set-up screen.]
Back Key Enter Key JogDial
+/- Key Reset From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ST:CURVE" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. Push Back key or Enter key to return at menu list. 49 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u Change a movement angle of Servo for an operation angle of wheel like a gure. At + side (+1 to +100), react greatly at the start, and a response becomes loose later. At - side (-1 to -100), react loosely at the start, and a response becomes big later. S 00 1
S e r v o M o v e m e n t t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n g S ettin g e t ti n S e ttin g 0 0 0
- 1 Wheel Operation D e s c r i p t i o n I n d e x advice When use with other function please check the effect one by one. Adjust Steering punch (see page 50) to change initial reaction of steering. DRAFT 50 ST BALANCE (Steering Balance) Adjusting the steering servo turning angle in the left and right directions independently. (Steering Balance) Adjust the steering servo turning angle in the left and right directions independently when turnig the wheel fully.
[How to open the set-up screen.]
t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Back Key Enter Key JogDial
+/- Key Reset i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ST:BALANCE" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. A setting value is a reset key (+--simultaneous aggressiveness), and is initialized to 70%. Press "Back Key",back to function menu list screen. Steering show up to turn left or right When push Et button that assign steering trim D e s c r i p t i o n I n d e x advice When adjust the steering balance Make 0 the Trim. Adjust sub trim to run straight at neutral position. Adjust at steering balance the each turn radius. Adjust at steering travel the full rudder angle. Adjust the trim when didn't run straight. See also About Sub trim (page 23 and page 34) DRAFT ST TRAVEL(Steering Travel) Adjust the total movement of steering. Adjust the movement of steering servo when cut the steering wheel.. Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
51 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ST:TRAVEL" from Menu list. i M a n M e n u Push "Enter" key. to enter setup menu. Use "Jog dial" key or "+,-" keys, to adjust the value. Initial value is 100. Maximum value is 150. Minimum value is 0. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. Press "Enter Key" or "Back Key",back to function menu list screen. F u n c t i o n M e n u ET4 assign initialy for steering travel. when control ET4 Indication such as the right appears. The number displayed that is a ratio for a number set up at steering travel function. ET-4 Steering will not function, When the value of steering travel are 0. advice Use Steering balance (see page 50) to adjust Right and left individually. do not set at excessive angle. It will cause of damage to the servo t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x
1 | manual 52 78 | Users Manual | 1.95 MiB |
52 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Back Key Enter Key JogDial
+/- Key Reset Pull the trigger to turn on the TH:POS function When back the trigger display OFF. AUTO START
[How to open the set-up screen.]
Return at Back key, But ready are still existing. Reset then start blinking "READY"
Set Throttle position. Set trigger position to start function From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "AUTO:START" from Menu list. When reset at first screen. AUTO START function will be waiting mode Use Jog dial or + ,- keys to move at setup screen
(Can not move to setup screen While blinking the "READY") Push enter key to change the cursor. to editable each item. Setup value can reset by push reset key. Push Enter or Back key to return to Menu list. PRESET : Position of throttle when function the AUTO START Initial Value F 0 Max F150 Min F 0 TH:POS : Position to start AUTO START Initial Value 5% Max 100% Min 5% or OFF When came back during on and off light, it is still effective advice Please check the movement before use. DRAFT MODEL.COPY Copy the data in Model memory to other Model memory. Save the current Model memory to other Model memory. Can select setup that match to the condition of track It will better to be copied to other memory before changing setting.
[How to open the set-up screen.]
Back Key Enter Key JogDial
+/- Key Reset A copy place is chosen.
"No" is selected and press enter key , return to menu list screen. Press "Enter Key" or
"Back Key,return to Menu list screen. 53 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s ex. To Copy Data of MODEL MEMORY1 to MODEL MEMORY2 Model copy is finished and blink
"COMPLETE" in LCD panel.
"Yes" is selected and press "Back Key",cursol From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "MODEL.COPY" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to Select Model Memory number. Use "Jog dial" key or "+,-" keys. then push "Enter" key When Select YES then push "ENTER" key: Do MODEL COPY then display "COMPLETE"
When Select NO then push "ENTER" key: Back to Menu list When Select YES then push "BACK" key: Cursor will mmove to NO When Select NO then push "BACK" key: Beep sound Push "ENTER" key or "BACK" key to Return to Menu list, If Model Copy was done and
"COMPLETE" displayed at screen It is useful When used in the following situation. Save the Current data and then try the New setup. Move the data from Data Pack Can swap the other data to the memory Can copy the Data. but the setup data can not copy to the unit Overwritten data aren't restored. Please confirm it before execution well. DRAFT i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 54 MODEL.NAME(Model Name) Put name at Model memory Put the name for Identified model memory
[How to open the set-up screen.]
t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Back Key Enter Key JogDial
+/- Key Reset i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "MODEL.NAME" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. The letter which can input till 10 characters. Push enter after select. An usable letter:
) When enter or edit the name. use Jog dial or +, - key to move the cursor to edit or enter the characters. Can use at initial screen and model select that model name. DRAFT MEM.RESET(Memory reset) Format to factory setting the model memory. Model memory will Back to factory setting. Format all data of model memory.
[How to open the set-up screen.]
Back Key Enter Key JogDial
+/- Key Reset 55 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "MEM.REST" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to choose Yes/No. Back to menu list When push back key.
"Yes" is selected and press "Enter Key",delete model memory. Only model memory in use is erased. Setting of a main menu isn't deleted. i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n Erased data aren't restored. Please confirm it before execution well. advice Use data pack to save the setup. D e s c r i p t i o n I n d e x DRAFT ADJUST VR(Adjust variable resister) Update information in a system of the VR that consumed. Back Key Enter Key JogDial
+/- Key Reset
[How to open setup screen]
56 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n Done Do ADJUST VR Procedure of Setup ADJUST VR Control Steering Control Trigger Full Turn to left Pull the Trigger to full foward Cancel Cancel Cancel Full Turn to Right Control Steering Throttle When display "COMPLETE"
Push "ENTER" key or
"BACK" key to Done. Control Trigger Push the Trigger to full back. This number are sample. This value can not use. Trigger can be canceled with back key after operation till "Enter" is pushed.(Not Over-write the memory) Beep sound does it, in the case of a steering or trigger operation data abnormality or no operation and a key isnt function. From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "ADJUST VR" from Menu list. D e s c r i p t i o n I n d e x Move to yes/no to control "Jog dial" key or "+,-" keys. Push Back key to return to Menu list. Select No: Return to Menu list Select Yes: Do Adjust VR. When push "ENTER". not to touch Steering wheel or throttle trigger during execution of "ADJUST VR". This Function for Cancellation of inconvenience of Consumption of the volume. It is depend on your Use frequency and An operation method. When Even this function can not fix the problems, please send to our service department to repair. advice Cause of trouble When use this function imperfectly. Recommend to send to our service department for repair, when you are not familiar with this function. DRAFT CH.SELECT(Channel Select) Select 2 Channel or 3 channel.Also select the switch at back of module When the switch are in High response mode 2channel : Advanced High Speed Response 3channel : Super High Speed Response Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
END END 57 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Push Enter to Move between Item to Item Push Back to return to menu. Use Jog dial to control CH3 Select Function From initial screen, open the function menu. use "Jog dial" or "+, -" key. At menu list, Move the cursor to the CH.SELECT. use "Jog dial" or "+, -" key. then push Enter. To control Jog dial to select 2or 3 channel. When select 3 channel. the "setup" will display at lower part of screen. then can select the control function for 3rd channel Push Back key to return to menu list. When setting of 3CH are in "FIX":Signal in itself is fired, but can't control a signal because it was fixed When assign to BT or ET. can function as switch movement. or can assign reverse switch to change movement directions The movement of channel 3 is adjust max and min of rudder angle (switch-movement) About Response mode: This unit can select from 3 kind of response mode Normal Response High Response Super High Speed Response Advanced High Speed Response Normal Response This mode can use all type of servo and receiver. Super High Speed Response This mode is adopted in MARS-R. Old receiver and Servo can't be used at this mode. but the response are improved. Advanced High Speed Response This mode can show the original speed. Digital servo is required for this mode. advice Please see page 19 about details of response mode. DRAFT i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 58 REVERSE (Reverse Switch) t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Set the direction of movement of each channel. Can Set the direction of movement of each channel. Use this function when the turing direction of servo is opposite to the wheel/trigger operation.
[How to open the set-up screen.]
Can change selected Channel Back Key Enter Key JogDial
+/- Key Reset i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g Push Enter or Back key to return the cursor. i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "REVERSE" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. The menu for 3ch will display, when selected the CH.SELECT. (page 57) Push back key to back to menu list. In an Electric car an ESC will adjust Throttle. When reverse isn't set up, it's not work normally at old ESC. A movement direction of steering are depend on each cars. Check the setup after mount to the car. DRAFT TRIM RATE (Trim Rate) Adjust Movement volume of the one step of Trim. Total step of Trim are 100, adjust Movement volume of the one step of Trim. Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
Initial value Minimum Maximum 10 1 20 From initial screen. use "Jog dial" key or "+,-" keys. to open Function menu. Use "Jog dial" key or "+,-" keys. to choose the "TRIM.RATE" from Menu list. Push "Enter" key. to enter setup menu. use "Jog dial" key or "+,-" keys. to adjust the value. Press "EnterKey or "Back Key",change cursol function menu list screen. to .And press "Back Key ",retuen to 1 step of trim Be variable. Movement volume comes to have a small the one where a number is small The number of total step doesn't change. When change trim rate, The range that can adjust will change. Is cause to out of setting the trim when make a change with the situation that was already adjusted advice Can do close adjustment when make a rate to trim small. but some of servo An enough effect isn't provided Please do a review of linkage, Before doing particular setting of trim. DRAFT 59 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x SET UP Assign the function to ET, BT Can assign to ET or to BT Various functions. Some of function assign at first. but they can change it to customize. Back Key Enter Key JogDial
+/- Key Reset
[How to open the set-up screen.]
Do set up Select Item Select item with cursor to assign the function. If the function are already used, Function name will blink then the Redundancy function name will display at screen below Function name that can assign to each ET and BT. Indication contents of each function. OFF:
ST TRIM:
SUB TRIM:
TRAVEL:
BRAKE:
TH.SP-L:
TH.SP-M:
TH.SP-H:
ABS.W:
ABS.P:
ABS.C:
ACCEL.W:
ACCEL.C:
TH TRIM:
TH SPEED:
ABS:
ACCEL:
UPTIM:
LAPTIM:
DOWNTIM:
PRESET:
CH3:
None Steering Trim Steering Sub Trim Steering Travel Trottle Brake Throttle Speed (Low Speed) Throttle Speed (Medium Speed) Throttle Speed (High speed) ABS (Width) ABS (Position) ABS (Cycle) Throttle acceleration (Width) Throttle acceleration (Cycle) Throttle Trim Throttle Speed On/Off ABS On/Off Throttle acceleration On/Off Up Timer Lap Timer Down Timer Preset the Throttle 3 channels control Function of 3 channel will appear if select at CH.SELECT the 3CH. OFF means not function. 60 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x From initial screen open function menu by Jog dial or +, - keys. From menu list select SETUP then push Enter key. Select ET or BT to assign the function by Jog dial or +, - keys. Use Jog dial or +, - key to set function name. if it is alredy assign. Push back key: cancel the setup and return to Setup menu. Push Enter key: accept changees of setup and return toSetup menu. DRAFT UP TIMER Setup UP timer to use.
"UP TIMER" is Simple Timer that add the time. but Can set LAP navigation function also.
[How to open the setup menu]
They dont have an allotment with an initial situation, a setup screen is displayed. If assign it to BT1. Back Key Enter Key JogDial
+/- Key Reset 61 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Start Trigger Start Start Counting
"READY" will blink When time data is display push reset key to clear the display Start when pull the trigger. There are two kinds of start methods. Key Start It starts with the assigned button. In an example, if BT1 is pushed, it will start. It can start, even if it is not a timer screen. Stop Control BT1 It can start, even if it is not a timer screen. Pause Push Enter key Operation is possible only on a timer screen. It can not change to a setting screen. Restart Control BT1 Or While pause and Timer screen was display push Enter key Reset While stop the timer
(Include Pause) push Reset key. Can set While timer is stop
(Can not setup while pausing). ALARM Alarm is sounded after counting setting time.(Alarm tone can set (See page 29)) Initial Value Off Min.Value 1 min Max.Value 99 min P.ALARM Can set Pre Alarm before the Alarm Initial Value OFF Min.Value 1 sec Max.Value 30 sec NAVI Set LAP Navigation Initial Value OFF Min.Value 3.00 sec Max.Value 99.99 sec Set each item When set NAVI, The button assigned to the rise timer needs reset-after pause operation on a timer screen to stop in order to function as reset of NAVI. Open the function menu. use Jog dial or "+, -" keys. From menu list, use Jog dial or "+, -" keys, and select the UP TIMER. If not ET or BT assign it to lap timer, Setup will be displayed. Enter or Back key the cursor will back then push the back key to return at menu Lap navigation function can set the target lap time. Can start with a button the same as "UP TIMER"
DRAFT i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DOWN TIMER Set Down timer It is a timer subtracted from time set up. Use When a timing of fuel refueling of an engine car is measured.
[How to open the set-up screen.]
They dont have an allotment with an initial situation, a setup screen is displayed If assign to BT2 62 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s Back Key Enter Key JogDial
+/- Key Reset i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Start Control BT2 to start Reset start Control BT2 to reset then re-start it is not necessary to display the timer screen . It is not necessary to display the timer screen Stop When Indicated 0m00s to the screen, the buzzer will alarm then timer will stop Stop in time Reset key (push +, - key at the same time) it is necessary to display the timer screen Count indication Auto set Actually functions to set the time that it took to a down timer. Ready to start Start at BT2 Button While counting
"READY" will blink When push reset button in Down timer screen. Auto start function will wait for start. Do a pouse and a start in turn whenever push a Enter key. Stop auto set function when push reset key While pouse. Need to reset key operation If start Auto set then stop Less than 1 minute.
(It will stop when power-off) Set up Timer Pre-alarm Initial value 5 min. Min. value 1 min. Max value 99 min 59 sec. Initial value 0 sec. Min. value 0 sec. Max value 59 sec. Open the function menu. use Jog dial or "+, -" keys. From menu list, use Jog dial or "+, -" keys, and select the DOWN TIMER. If not ET or BT assign it to lap timer, Setup will be displayed. Subtracted from time set up on Down Timer. Use Auto set, then Run the car till empty the fuel. When set pre alarm, can usable as a refueling timer Need to assign any button to use this function. Can assign the custom tone at alarm of Down timer function.(see page 29) DRAFT LAP TIMER Can count the every lap by using Lap timer. Set the Lap timer function and measurement point to record the lap. unestablished any key at an initial situation.
[How to open the set-up screen.]
They dont have an allotment with an initial situation, a setup screen is displayed. If assign to BT2 Start While counting Counter display Pause
"READY" blink ENT Do Pause and restart in turn Can not move the cursor during pause.
+- When Push the Reset key during pause. all lap record will clear. Lap Records Stop Need to set Alarm time. A timer stops by controlling a button after time progress. Pull the Trigger, to start counting Start counting when push the Assigned button. Alarm Time Setup Pre-Alarm Time Lap Timer Alarm LAP Timer Pre-Alarm Display Lap Time Delete Lap record Next time start recorded from displayed LAP In this case start recording from LAP 2. Push "ENTER" button to change the cursor. Push "ENTER" or "BACK"
button to cancel. Delete all Lap records. Together While push "ENTER" button then Push together the "+ and -"
button. to clear all LAP records Back Key Enter Key JogDial
+/- Key Reset 63 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n Open the function menu. use Jog dial or "+, -" keys. From menu list, use Jog dial or "+, -" keys, and select the LAP TIMER. If not ET and BT assign it to lap timer, Setup will be displayed. Can record till 80 laps. after 80 laps over-write to 81st lap the 1st lap. D e s c r i p t i o n I n d e x advice The lap time record at Lap timer will save at same place. but the set up is Independent at each memory. Can use custom tone at alarm. (see page 29 and page 30) Can use 3 kind of timer at same times. (UP Timer, Down Timer, Lap Timer) 64 Connecting the Receiver t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g Warning!
Warning!
Warning!
Caution!
Caution!
Warning!
Be certain to use only KO Propo genuine FM crystal sets(transmitter and receiver). Never use crystals produced by other companies since such crystals may vary in frequency, which could lead to misoperation or out of control. Be sure to connect all equipment correctly. If connections are loosened by vibration,the model may run out of control. Do not cut or bundle the aerial wire with other cords. It may result in decreasing the sensitivity of the receiver and may result in the model running out of control. Be careful not to reverse the polarity of the transmitter and the receiver. Reverse polarity could damage the units. Be sure to use genuine KO Propo products e.g. transmitter,receiver, ESC and other optional parts.
* We cannot assume any responsibility for the use of other companies products with this unit. Be sure to use grommets and be sure that the servo is not touching any metal plates directly. * The vibrations may damage the servo and the model may run out of control. Connecting the receiver KR-302F Antenna Lead Crystal replacement BATT Switch Harness CH1 Steering Servo CH2 ESC or Throttle Servo CH3 For an electric-powered car
(FET servo + FET ESC) Steering Servo 7.2V FET Servo Receiver Electric Speed Controler For a gasoline-powered car (6V servos) 5N600mAh 6VNicd Battery Switch Harness Throttle Servo i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x H o w d i d y o u g e t t h i s s c r a t c h ?
P l e a s e g i v e m e g r o m e t
s t
t
. r y ,
' m s o r i f o r g o t I I Receiver Steering Servo For a gasoline-powered car
6N600mAh
(7.2V FET Servos) 7.2VNicd Battery 7V Reguletor Switch Harness Receiver Throttle Servo Steering Servo DRAFT Connecting the Receiver KR-297FZ KR-301F Antenna Lead Antenna Lead BATT Switch Harness CH1 Steering Servo CH2 ESC or Throttle Servo CH1 Steering Servo CH2 ESC or Throttle Servo CH3 BATT Switch Harness With models of receiver to be used, the order of a row of each channel and a battery channel changes. Please connect a connector after a check of a display. Keep in mind that it does not operate even if it connects Servo and ESC to a battery channel. KR-302F Antenna Lead BATT Switch Harness CH1 Steering Servo CH2 ESC or Throttle Servo CH3 About frequency change When the frequency to be used is exchanged in a frequency band. The crystal of a transmitter and a receiver is exchanged for the thing of the frequency to be used. For changing the frequency band to be used. Exchange of a frequency band is possible by exchanging RF module of use. An exchangeable frequency band is restricted to the frequency band permitted in each country which uses it. 65 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT Notes on installing-1 The Source of Noise and Electromagnetic Induction (Electric-powered car) Assume that all areas where large currents are flowing are generating noise!
Locate antenna wires and receivers as far away from the motor, ESC, nicad batteries,and silicone wire as possible. Noise is a type of radio wave, and therefore is radiated (travel through the air) in the same fashion. Therefore, locating an antenna near a noise source increases the effect of the noise. 66 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g Metals and carbon can also conduct noise. As a result, you should never closely attach the antenna wire to the plate and carbon chassis. Distance Between the Receiver and Antenna Holder Install the antenna holder as near to the receiver as possible. The easier it is for the antenna to pick up noise,the sensitivity of the receiver will decrease. i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Because this is also part of the antenna, it is easier to pick up nearby noise. DRAFT Notes on installing-2 Notes on Installing the Receiver Notes on Installing Position (Do not near the reciever item.) The installation position should be as far as possible from the motor, ESC, nicad batteries, silicone wires or other noise sources.Especially, do not route the silicone wires next to the receiver. (must not be near to the crystal) FET servo blue wire (7.2V wire) and switches can also generate noise, position them as far away as possible from the receiver and the antenna. The silicone wire passes directly over the receiver. 67 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Antenna Do not allow the silicone wires to cross the antenna. Do not route the wires near the antenna. Do not position the antenna opening or the crystal near the nicad batteries, motor, or the carbon chassis. Do not position the receiver or the antenna on the top of the motor or the nicad batteries. When mounting the receiver and antenna on the "upper deck", position them as far away from the nicad batteries and motor as possible. Mounting the Receiver (Electric-powered car) When fixing the receiver in place on the chassis or on the "mechanical plate", use two pieces of double-sided tape, one on top of the other, as that the receiver is cushioned somewhat. Be sure that the crystal is on the high end when installing the receiver Do not mount the receiver directly on the chassis or
"mechanical deck"
Use two layers of double-sided tape. Do not position the crystals on the bottom Always position the crystal on the top DRAFT Notes on installing-3 Notes on Installing the Receiver (Gasoline-powered car) Do not secure the receiver on the chassis or the "mechanical deck". Vibrations will cause the receiver to misfunction and may even cause internal damage to the receiver. Either use the bracket (receiver holder) provided with the kit, or else cushion the receiver with a sponge like material. Bracket Sponge 68 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u The exhaust gas of engine carries neither in this place nor the place which becomes high temperature. * A receiver breaks down and it becomes the cause of a reckless run. F u n c t i o n M e n u Notes on Antenna Installation Please follow the instruction as in the illustration below when you mount the antenna holder to the metal or carbon chassis.When using on FRP or carbon hollow antenna on a racing car, etc., do not pass the antenna wire through the pipe, allow it to trail away loosely outside. t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x Piano wire Pipe Pipe Aluminium holder Aluminium holder Plastic holder Metal, carbon
(OK if FRP or plastic) Metal, carbon
(OK if FRP or plastic) Soldered to lug board Metal, carbon Do not secure antenna wire to the plate DRAFT Main Spefcifications Main Specifications 69 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s RF Module RF-501F for KT-303H KT-303H Transmitter Operation method Number of channels Transmission Frequency Neutral pulse Memory Supply Voltage Current consumpion Transmission Frequency range Modulation method Receiver KR-302F Reception method Number of channels Reception frequency IF frequency Supply voltage Dimentions Weigh Wheel+ Triger 3 Channnels Any Band by changing crystals within the frequency range 1.5msec EEPROM 8x AA size dry cel or 8 cells Nicad Less than 250mA Any frequency range by switchung RF modules FM-PPM i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n FM-PPM 3 Channels Any Band by changing crystals within the frequency range 455KHz 3.5 6.5V 29.3 16.4mm 12.0 (excluding crystal) 24.4 D e s c r i p t i o n I n d e x DRAFT Description Terminology used in radio control mode usage.Please refer to the Index for theterminology or wording of this transmitter. Analog Servo Alarm Amplifier ESC 70 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u EEPROM Internet WEB Site AM F u n c t i o n M e n u LCD AC Charger FM FET t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x FET Servo ET Fast Charger Carburetor Crystal Clutch High frequency ESC
(an amplifier) High frequency (RF) module Connector Rubber Grommet Servo Cycle CPU Frequency band Receiver (RX) Jog dial Speed controller Swing Spline Center Trim The general term of a model of machines of the Servo which used a thing of an analog method for control IC of Servo A signal to be famous as a buzzer of a transmitter. When it is used for a meaning of warning. ESC Abbreviation of an electric speed controller. It is a speed controller of a motor to use by electric car. An amplifier is said. A kind of memory. Contents written in aren't erased even if switched off. It is used for data pack in EEPROM others of memory in the main body The network where the communication network where plural personal computers were connected to was connected to on a large scale more. Information dispatch by a homepage and an E-mail are depended on in the world, and communication can be done. Home Page An electric wave to send from a transmitter A signal form of an electric wave. There is FM as another method. AM is an abbreviated designation in English of an amplitude modulation method. When that is used, It is had to match a signal form of transmission and reception machine. A cable address to mean liquid crystal indication device. It is used to display letters. A charge container to connect to 100V outlet. There are many situations to cut more than several hours in charge. A signal form of an electric wave to send from a transmitter. FM is an abbreviated designation in English of a frequency modulation method An electric field effect transistor. Loss resistance is small, and, in comparison with a normal transistor, a consumption electric current of oneself is small, too. FET was used for a motor drive element instead of a conventional transistor, and it is being of high class Servo. An Abbreviation of electric trim. Besides, a button is abbreviated to BT. The Charger which charges a nickel-cadmium battery and a nickel metal hydride battery by a short time. Fuel mixture device, turn number of engines are controlled. A component to set frequency of transmission and receiver, It is made from crystal. An output axis of an engine and the intermittent continuation device which there is between gearing devices. ESC of the method how frequency to drive a motor is high. Most are these systems, but the thing which isn't a high frequency system exists in past things. An electric wave is made, and a circuit device to fire can be put on and off. When a frequency band to use (27MHz .40MHz) is changed, it is had to swap it. Electric point of contact unit of putting on and off type. The rubber component which protects Servo from vibration, an edge of a Servo case can be possessed. The device which converts a management signal of a transmitter into turn machine exercise. A Servo motor. It is space and period of repetition of a certain movement. IC of a core of a computer used in various uses by digital operation processing.A microcomputer. It can be called MPU. It is called the place that each frequency gathers, and shine, 27MHz zone (mega Hz), 40MHz zone. The device which an electric wave of a transmitter is received, and send a control signal forth in Servo and ESC. A knob for data modification of a turn system not to have a stopper. If that is controlled every one click, by 1 point can do data modification, but is usable usefully when numerical value wants to be made a change in at a stretch ESC Campaign against coming and going between a certain set two points. Exact location of the servo horn in to the neutral position. Even if the trim is adjusted, overall turning angle point will not be changed. DRAFT Description Servo Saver Horn The shock absorbing device that is installed or in place of servo horn. Transmitter (TX) Hand set that transmitter signal. Turning Angle (Travel) Turning angle of the servo horn. Channel (CH) Data Pack Digital Servo Delay DC Charger Duty Travel Trigger Trim 7.2V Servo Number of Servo which can be controlled with a transmitter one by one. Or it is a number of that individual signal It is the module which had memory for enlargement built-in. Usable model memory can be increased. The general term of a model of machines of the Servo which used a thing of a digital system for control IC of Servo. Act slowly. The Charger which uses direct current for power supplies such as 12V battery or 12V stabilization power supply. It is the ratio of two movement. It is a rudder angle, movement volume. Control mechanism of a transmitter. A piece pulled with a finger to control the speed or brakes. The device which adjusts a neutral position of each channel signal. The Servo that a motor becomes the other power supply. By a KO PROPO original system, it is expected that a power supply is taken out of a power supply for power (7.2V) in the case of an electric car It is different from a dry cell, The battery which it is charged repeatedly, and can be used. There are NiMH or lithium ion as the battery which it is charged, and can be used repeatedly elsewhere The situation that separated a hand from a stick of a transmitter or a position of Servo Horne at that time. It is for one of the frequency band that it can use by radio control, ground, water model, and there are 12 belts. An electric noise. For a kind of electric wave, it makes it jumps into a receiver and malfunction. It is frequency and is selected with crystal glass. It can make a change by crystal glass exchange in the same frequency band. It is frequency and is selected with crystal glass. It can make a change by crystal glass exchange in the same frequency band Because themselves don't emit light LCD (a liquid crystal display), visibility isn't good by the time if it is dark. It is the lamp which is installed in the backside of liquid crystal to solve this (the emission of light source) The field where Servo doesn't react to even if it controls foil and trigger. It means the volume that detects the position of the stick. When it receives an interference electric wave, it is the device which it fixes Servo Horne at the position that a computer set up beforehand, and prevent reckless driving. The stick thing which is used for linkage. Will set up a position in advance It is an adapter it converts a signal into, and to be connected to do setting of a transmitter with a PC. The circuit device which makes you discharge a residual quantity of a charge type battery of NiCad forcibly. Mechanism of the transmitter which it turns it from side to side, and control a steering. Intermittent breaking action. It says the place where it mentioned a certain information in on Internet. It can look by software on a personal computer called a Web browser. The board which installs receiver Servo on a chassis of a car. 1000Hz =1 KHz (a kilohertz) 1000KHz =1MHz. In a personal computer, it is used for a meaning called the preservation place in which information is stored temporarily. Although the information on the memory in this case will be lost if a power supply is shut off, the memory used for a transmitter etc. is called non-volatilized memory, and even if it shuts off a power supply, it holds information. One of the frequency band that it can use by radio control. Eight bands for ground model. There are five bands for sky model. Servo and connection mechanism to connect each mechanism to of a model. Return setting contents of setting numerical value to an initial situation The circuit which stabilizes the input voltage to the necessary voltage. It is time before machinery of the receiver side reacting since it controls a transmitter. The thing of width which operates by ABS or Throttle Acceleration. DRAFT NiCad (Ni-cd) Neutral 27Mhz Noise Band plate Band Backlight Dead Band VR Fail safe adaptor Push rod Preset PC interface Discharger Wheel Pumping Effect Home Page Machine plate Mega Hz (MHz) Memory 40Mhz Linkage Reset Regulator Response Width 71 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x 72 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 73 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT 74 t r a n s m i t t e r U s a g e o f t h e F e a t u r e s i M a n M e n u F u n c t i o n M e n u t h e r e c e i v e r C o n n e c t i n g i n s t a l l i n g N o t e s o n D e s c r i p t i o n I n d e x DRAFT
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-08-15 | 75.41 ~ 75.99 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-08-15
|
||||
1 | Applicant's complete, legal business name |
Kondo Kagaku Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0007358112
|
||||
1 | Physical Address |
17-7 Higashi - Nippori 4 chome, Arakawa-Ku
|
||||
1 |
Tokyo, N/A 116-0014
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
QH9
|
||||
1 | Equipment Product Code |
T125003
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** A****
|
||||
1 | Title |
Engineer
|
||||
1 | Telephone Number |
81-3-********
|
||||
1 | Fax Number |
81-3-********
|
||||
1 |
t******@kopropo.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote Control Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Timco Engineering, Inc.
|
||||
1 | Name |
S**** S********
|
||||
1 | Telephone Number |
888-4********
|
||||
1 | Fax Number |
352-4********
|
||||
1 |
i******@timcoengr.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 95C | 75.41000000 | 75.99000000 | 0.5130000 | 20.0000000000 ppm | 8K0F1D |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC