all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 101.84 KiB | August 08 2019 | |||
1 |
|
Confidentiality Letter | Cover Letter(s) | 37.43 KiB | August 08 2019 | |||
1 |
|
External Photo | External Photos | 499.87 KiB | August 08 2019 | |||
1 |
|
Internal Photos | Internal Photos | 445.25 KiB | August 08 2019 | |||
1 |
|
Label | ID Label/Location Info | 511.38 KiB | August 08 2019 | |||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 117.32 KiB | August 08 2019 | |||
1 |
|
RF Exposure Info | RF Exposure Info | 131.70 KiB | August 08 2019 | |||
1 |
|
Test Report | Test Report | 2.33 MiB | August 08 2019 | |||
1 |
|
Test Setup Photo | Test Setup Photos | 485.82 KiB | August 08 2019 |
1 | User Manual | Users Manual | 101.84 KiB | August 08 2019 |
REG02 International US and Canada Online FRONTCOVER KSBTAP2 KitSound Airline Adaptor 2 User Manual INNER LEAF Please read this manual carefully before use. WARNING Please do not get the product wet. If your product is IP rated, please follow guidelines on how to safely use your product overleaf. Please dont take the product apart. There are no user serviceable parts inside Please dont modify or alter the product or accessories Please dont expose the product to extreme temperatures or rapid changes of hot to cold or vice versa Please dont use damaged cables or plugs, or loose electrical sockets Please dont touch the device, cables, plugs, or the electrical socket with wet hands or other wet body parts Please dont pull the cable excessively when disconnecting it if the cable is not fixed Please dont bend or damage the cable Please dont drop or cause an impact to the product or the device Please dont place naked flame sources, such as lighted candles, on the product Battery Information Batteries may malfunction if they are not used for extended periods Over time, unused devices will discharge and must be recharged before use Disconnect the charger from power sources when not in use Use the batteries only for their intended purposes Follow all instructions in this manual to ensure the longest lifespan of your device and battery. Damages or poor performance caused by failure to follow warnings and instructions can void your manufacturers warranty Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like QA-MRK-FM-08-02 v1 Box contents KS Bluetooth Airline Adaptor Micro USB charge cable User manual Functions Multifunction Button 1. 2. LED light indicator 3. DC 5V Micro USB charge port 4. Stereo Pin 5. Mono Pins Instructions for use How to use the Airline Adaptor:
How to use the Airline Adaptor:
How to use the Airline Adaptor:
How to use the Airline Adaptor:
1. Connect the Airline Adaptor to your media device using either the single stereo pin(4) or both pins in mono mode(5). 2. Once the Airline Adaptor pin(s) are connected, hold the multifunction button for 3 seconds to power on. 3. The KS Airline Adaptor goes into Bluetooth pairing mode automatically. Pairing mode is indicated by a white flashing light. Once a connection is made, the light will be solid white. The Airline Adaptor will auto reconnect to the last connected device in pairing mode. If you are auto reconnected to a device, but wish to connect a new device please hold the multifunction button for 5 seconds, the light will flash white as the KS Airline Adaptor searches for available devices. 4. 5. Hold the multifunction button for 3 seconds for power off. Mono and Stereo input modes Mono and Stereo input modes Mono and Stereo input modes Mono and Stereo input modes 1. The Airline Adaptor can be used in either Mono or Stereo input mode, depending on what terminal is avaialbe to you. 2. Mono mode uses both pins(5) and stereo mode uses the single stereo pin(4). 3. 4. If you are presented with dual input terminal then you will need to use both pins in mono mode. If you are presented with a single input terminal then you will need to us the single stereo pin. Getting started Function Function Function Function Turn ON/OFF Button Action Button Action Button Action Button Action Press and hold the Multifunction button for 3 seconds. Enter pairing mode Press and hold Multifunction button for 5 seconds. Clear paired record Press and hold the Multifunction button for 7 seconds. Charging the battery:
Give the Airline Adaptor a full charge before its first use. QA-MRK-FM-08-02 v1 1. Connect the USB charging cable to the Micro USB charging port and plug into power. 2. The battery LED indicator will be solid red whilst charging. 3. Charging will take up to around 2 hours. 4. Once fully charged the battery LED indicator will turn off. Note: Allow up to 3 hours for the first charge. Battery information 1. Your device is powered by a rechargeable battery. Unplug the charger from the electrical plug 2. and the device when not in use. If left unused, a fully charged device will lose its charge over time. We recommend a full charge twice a month to ensure battery integrity. 3. Please do not leave the device in hot or cold places, such as in a closed car in summer or wintery conditions as it will reduce the capacity and lifetime of the battery. 4. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. LED lights indication Pairing mode Flashing White Paired in Bluetooth Solid White Clear paired record Red and White LED flash once Battery below 30 minutes playtime Flash Red every 6 seconds Charging battery Solid Red Charging complete (around 95%) Red LED turns off Pairing the Airline Adaptor 2 to your device 1. Start by turning on the KS Airline Adaptor 2 by long press the Multifunction button for 3 seconds. The KS Airline Adaptor 2 will automatically enter pairing mode upon startup, if your device has not been paired previously. 2. Turn on your IOS, Android or Windows devices Bluetooth to ON and search for new devices. 3. Select KS Airline Adaptor 2 from the list of found devices. If asked for a pass code, enter 0000 and the KS Airline Adaptor will be connected. Re-pairing or pairing new devices 1. Turn Bluetooth connectivity off on any previously paired devices OR 2. Long press the MFB (1) to re-enter pairing mode QA-MRK-FM-08-02 v1 3. Follow the Pairing the Airline Adaptor 2 to your device instructions Note: If a previously paired device is not present within the Bluetooth connectivity range then the Airline Adaptor will re-enter pairing mode. Bluetooth When your headphones/speaker is connected to the Airline Adaptor via Bluetooth, play media on the device that the Airline Adaptor is connected too and the sound will play through your headphones/speaker. Specifications Bluetooth technology v4.2 Bluetooth connectivity distance Battery Play time Charging time Working temperature Product size (mm) Cable length Weight Troubleshooting We hope you've now got all the information you need to get started, but if you're having problems with anything, please feel free to contact us at: support@kitsound.co.uk up to 18 m Li-ion, 500mAh up to 15 hours up to 2 hours
-20C ~ +70C H100mm x W62mm xD62mm 0.8 m 20 g Hereby, Kondor Ltd declares that the radio equipment type, Airline Adaptor 2 (KSBTAP2), is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents. FCC ID: 2ADFF-KSBTAP2 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device and ISM equipment, pursuant to part 15 of the FCC Rules respectively. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. QA-MRK-FM-08-02 v1 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help The use and operation of this product is beyond our control. Warranty of the Airline Adaptor 2 is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery. This may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We are sorry for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. BACKCOVER kitsound.co.uk The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners. All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Products showing the Crossed Through wheelie bin symbol must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer may operate a take-back scheme when you are ready to purchase a replacement product, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling. Please recycle this packaging responsibly. QA-MRK-FM-08-02 v1 JB. 6775-a/REG02/KSBTAP2/Made in China. KitSound is a trademark of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK QA-MRK-FM-08-02 v1
1 | Confidentiality Letter | Cover Letter(s) | 37.43 KiB | August 08 2019 |
Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ADFF-KSBTAP2. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type Block Diagram Schematic Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. KONDOR LIMITED understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, KONDOR LIMITED
-------------------------------
Wilson Loke (On behalf of Kondor Limited) Senior Manager
1 | External Photo | External Photos | 499.87 KiB | August 08 2019 |
FCC ID: 2ADFF-KSBTAP2 External Photo FCC ID: 2ADFF-KSBTAP2
1 | Internal Photos | Internal Photos | 445.25 KiB | August 08 2019 |
FCC ID: 2ADFF-KSBTAP2 Internal Photo FCC ID: 2ADFF-KSBTAP2 FCC ID: 2ADFF-KSBTAP2 FCC ID: 2ADFF-KSBTAP2
1 | Label | ID Label/Location Info | 511.38 KiB | August 08 2019 |
V01 V01.1 V01.2 V01.3 V02 V03 13/05/2019 22/05/2019 23/05/2019 23/05/2019 01/07/2019 03/07/2019 J.WILTSHIRE J.WILTSHIRE J.WILTSHIRE J.WILTSHIRE J.WILTSHIRE J.WILTSHIRE Compliance label mass production Compliance label mass production Compliance label mass production Compliance label mass production Compliance label mass production Compliance label mass production 1:1 SCALE Print Font: Source Sans Variable - Regular Print Colour: Black Print Finish: Spot UV
)+0/
/#* /
$)#$)
#$. 1$ *(+'$ .2$/#-/*!/# 0' .
+ -/$*)$..0% //*/# !*''*2$)"/2**)$/$*).
/#$. 1$ (4)*/0. #-(!0'$)/ -! - ) )
/#$. 1$ (0./ +/)4$)/ -! - ) - $1
$)'0$)"$)/ -! - ) /#/(40. 0) .$-
*+ -/$*)*)*-#-$./#0-#
*-. /
+*/
UV DOC REF: QA - R&D - FM - 08 KitSound Airline Adaptor 2 N/A KSBTAP2 File Name:
, 4 # 5" 1 _$ N L O KH@ M B D_7
V03 03/07/2019 Joel Wiltshire Jordan Jones KS1902_AirlineAdaptor_V04.2.STEP 1
1 | Power of Attorney Letter | Cover Letter(s) | 117.32 KiB | August 08 2019 |
Kondor. The Smart Choice Date: March 26, 2019 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC Certification with Grantee code 2ADFF To whom it may concern:
We, the undersigned, hereby authorize CMA Industrial Development Foundation Limited/Wilson Loke to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still tesides with Kondor Limited. This authorization is valid for twelve calendar months from today's date. Name (Printed): Paul Logue Title: Head of Quality & Compliance Signature:
On behalf of Company: Kondor Limited Telephone: 04125284109 Kondor Headquarters Tel: +44 (0) 1425 284000 Register Christchurch Business Park Fax: +44 (0) 1425 284140 Repster Radar Way hes Christchurch www. kondor.co.uk Dorset 8H23 4FL VAT Reg No GB 186 7497 a2 United Kingdom 1509001-2008 registered SGS certificate GB98/13754
1 | RF Exposure Info | RF Exposure Info | 131.70 KiB | August 08 2019 |
RF EXPOSURE EVALUATION Report No.
: AY0041770(8) Application No. Applicant
: LY022378(0)
: KONDOR LIMITED Date: Jul 28, 2019 Sample Description : One(1) item of submitted sample stated to be CHRISTCHURCH BUSINESS PARK, RADAR WAY, BH23 4FL. UK FCC ID Date Received Evaluation Period Evaluation Method Conclusion
:
:
:
:
:
: AIRLINE ADAPTOR 2
: KSBTAP2
: RY034755-003(5)
: 2402 2480MHz
: DC3.7V (Li-ion rechargeable battery) Product Descriptin Model Sample registration No. Radio Frequency Supply voltage DC5.0V (Charging pad) No. of submitted sample : 1 2ADFF-KSBTAP2 Jul 5, 2019 Jul 7, 2018 Jul 24, 2018 447498 D01 General RF Exposure Guidance v06 - RF Exposure Procedure and Equipment Authorization Policies for Mobile and Portable Devices The source-based time-averaged maximum conducted power of Bluetooth operation were satisfied RF exposure requirements. For and on behalf of CMA Industrial Development Foundation Limited Page 1 of 2 Document name: FCC RF exposure - Document Ref No: RT-EL-EMC-008 - Issue Date: 01 Dec 2017 - Edition: 1 Authorized Signature :
RF EXPOSURE EVALUATION Report No.
: AY0041770(8) Date: Jul 28, 2019 Simultaneous power No Simultaneuous transmission RF Exposure Evaluation According to KDB 447498 D01 clause 4.3.1 a), transmission from 100 MHz to 6 GHz and test separation distances 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]
[f(GHz)]
Calculation
: 2.480GHz
: 2.00mW
: <5mm
- Frequency
- Max. peak conducted output power , including tune-up tolerance
- Minimum test separation distances where
-f(GHz) is the RF channel transmit frequency in GHz.
-Power and distance are rounded to the nearest mW and mm before calculation.
-The result is rounded to two decimal place for comparison. Substitute above reading for calculation.
[(mW) / (mm)] x GHz]
Result = 0.630 Requirements: 3.00 for 1-g SAR and 7.5 for 10-g extremity SAR Conclusion The corresponding SAR test exclusion threshold was satisfied 4.3.1a) requirements. Measurement or numerical simulation is not required.
***** End of Evaluation *****
Page 2 of 2 Document name: FCC RF exposure - Document Ref No: RT-EL-EMC-008 - Issue Date: 01 Dec 2017 - Edition: 1
1 | Test Report | Test Report | 2.33 MiB | August 08 2019 |
TEST REPORT Report No.
: AY0041769(5) Application No. Applicant
:
LY022378(0)
: KONDOR LIMITED Date :
Jul 28, 2019 Sample Description :
CHRISTCHURCH BUSINESS PARK, RADAR WAY, BH23 4FL. UK Sample Description AIRLINE ADAPTOR 2 Model No. KSBTAP2 Date Received Test Period Test Requested Test Method Test Engineer Conclusion
:
:
:
:
Jul 05, 2019 Jul 07, 2019 to Jul 24, 2019 FCC Certification for FCC Part 15, subpart C 47 CFR Part 15 (10-1-18 Edition), ANSI C63.10 2013, ANSI C63.4 2014
: Mr. Leung Shu Kan, Ken
:
The submitted sample was found to comply with technical requirement of FCC Part 15 Subpart C, section 15.247. Authorized Signature :
FCC ID: 2ADFF-KSBTAP2 For and on behalf of CMA Industrial Development Foundation Limited Page 1 of 71 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 RESULT SUMMARY Test Item Number of hopping frequency Band-edge FCC Requirement 15.247(a)(1)(iii) 15.247(d) Carrier frequency separation Time of occupancy (dwell time) Output power Occupied bandwidth 15.247(a) 15.247(a) 15.247(b)(1) 15.247(a) Conducted spurious emission
(Transmitter) Radiated spurious emission
(Transmitter) Radiated spurious emission
(Receiver) Conducted emission on AC mains Frequency Hopping System Requirement 15.247(d) 15.247(d) 15.109(a) 15.207(a) 15.247(a)(1), (g),
(h) Test Method ANSI C63.10 7.8.3 ANSI C63.10 7.8.6 and 6.10 ANSI C63.10 7.8.2 ANSI C63.10 7.8.4 ANSI C63.10 7.8.5 ANSI C63.10 7.8.7 and 6.9.2 ANSI C63.10 7.8.8, and 11.12.2.1 ANSI C63.10 6.4 6.6 ANSI C63.4 8.3 ANSI C63.4 7.3 N/A Result PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 2 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Table of Contents Table of Contents .............................................................................................................................................. 3 1 Product Information ................................................................................................................................... 5 1.1 General Information ............................................................................................................................ 5 1.2 Technical Information ......................................................................................................................... 5 1.3 Associated Electric Accessories Information ..................................................................................... 6 1.4 Associated Cables ............................................................................................................................... 6 2.0 Equipment Units Tested (EUT) .............................................................................................................. 6 3.0 Location of Test Facility......................................................................................................................... 6 List of test equipment, supporting equipment and cables ....................................................................... 7 4.0 Test equipment .................................................................................................................................... 7 4.1 4.2 Supporting equipment ......................................................................................................................... 8 4.3 Cables .................................................................................................................................................. 8 Software .............................................................................................................................................. 8 4.4 5.0 Measurement Uncertainty....................................................................................................................... 8 6.0 Measurement .......................................................................................................................................... 9 6.1 General Test condition ........................................................................................................................ 9 6.2 Number of hopping frequency ............................................................................................................ 9 6.2.1 Measurement ..................................................................................................................................... 9 6.2.2 Final Result ....................................................................................................................................... 9 6.3 Band-edge measurement ................................................................................................................... 10 6.3.1 Measurement ................................................................................................................................... 10 6.3.2 Final Result ..................................................................................................................................... 11 6.4 Carrier Frequency Separation ........................................................................................................... 12 6.4.1 Measurement ................................................................................................................................... 12 6.4.2 Final Result ..................................................................................................................................... 12 Time of occupancy (dwell time) ....................................................................................................... 13 6.5.1 Measurement ................................................................................................................................... 13 6.5.2 Final Result ..................................................................................................................................... 13 6.6 Output Power .................................................................................................................................... 14 6.6.1 Measurement ................................................................................................................................... 14 6.6.2 Final Result ..................................................................................................................................... 14 6.7 Occupied Bandwidth ......................................................................................................................... 15 6.7.1 Measurement ................................................................................................................................... 15 6.7.2 Final Result ..................................................................................................................................... 15 6.8 Conducted Spurious emission (Transmitter) ..................................................................................... 16 6.8.1 Measurement ................................................................................................................................... 16 6.8.2 Final Result ..................................................................................................................................... 16 6.9 Radiated Spurious emission (Transmitter) ........................................................................................ 17 6.9.1 Measurement ................................................................................................................................... 17 6.9.2 Final Result ..................................................................................................................................... 18 6.5 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 3 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT 6.10 6.11 Radiated Spurious emission (other mode) ........................................................................................ 19 6.10.1 Measurement ................................................................................................................................. 19 6.10.2 Final Result ................................................................................................................................... 20 Conducted Emission ...................................................................................................................... 21 6.11.1 Measurement ................................................................................................................................. 21 6.11.2 Final Result ................................................................................................................................... 21 Frequency Hopping System Requirement ............................................................................................ 22 7.0 8.0 External photo, Internal Photo and Test configuration Photo .............................................................. 24 APPENDIX A Test Result ..............................................................................................................................A1 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 4 of 71 TEST REPORT Report No.
: AY0041769(5) 1 Product Information 1.1 General Information Date :
Jul 28, 2019 Product Descriptin:
AIRLINE ADAPTOR 2 Model:
KSBTAP2 Primary function
: Transmit the audio signal through Bluetooth Power supply RF related function Electric Accessories sold with Interconnection cable associated sold with Operating condition Model difference Remark communication from a audio player
: DC 3.7V (Li-ion Rechargeable battery) DC 5.0V (micro-usb input)
: Bluetooth non-BLE communication
: Nil
: 82mm length USB to micro-USB cable (head to head)
: Not specified
: Not applicable
: N/A 1.2 Technical Information Operating Frequency Digital Modulation Modulation Number of Channel Channel Bandwidth Occupied Bandwidth Signal Type Number of Antenna Antenna Type Antenna Gain Rated Input Voltage RF Technology Used Simplex or Duplex Adaptivity
: 2402 2480MHz
: FHSS
: GFSK, p /4DQPSK, 8DPSK
: 79
: 1.0MHz
: 1.20MHz
: Data
: One
: PCB Type
: 2.0dBi
: DC3.7V (Li-ion rechargeable battery DC5.0V (micro-usb input)
: Bluetooth 4.1+EDR (non BLE)
: Half-duplex
: FHSS adaptivity FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 5 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 1.3 Associated Electric Accessories Information 2.0 N/A 1.4 Associated Cables Cable Type USB to micro USB cable Length 82mm Shielding No Ferrite attached No Equipment Units Tested (EUT) Product Description Model Serial No. Sample Type Sample No. Rationale of selection
: AIRLINE ADAPTOR
: KSBTAP2
: Not labelled
: Production sample and engineering sample
: RY034755-003(5) and RY034755-0047(6)
: Only one model model 3.0 Location of Test Facility CMA Industrial Development Foundation Ltd. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung, Fo Tan, Shatin, New Territories Hong Kong. FCC Accredited Lab (Designation Number: HK0004) FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 6 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT List of test equipment, supporting equipment and cables 4.1 Test equipment 4.0 Equipment Manufacturer Model No. Serial No. Calibration Due Date Calibration Period EMI Test Receiver Spectrum Analyzer Spectrum Analyzer Broadband Antenna Rohde & Schwarz ESCS30 100001 29 Mar 2020 1Year R&S FSV40 100964 11 Sep 2019 1Year Rohde & Schwarz FSP30 100628 26 Mar 2020 1Year Schaffner CBL6112B 2692 27 Mar 2021 2Years Loop Antenna EMCO 6502 00056620 25 Jan 2020 2Years Horn Antenna Schwarzbeck BBHA 9120D 9120D-531 21 Dec 2020 2Years Broadband Pre-Amplifier Schwarzbeck BBV 9718 9718-119 21 Dec 2020 2Years Horn Antenna Schwarzbeck BBHA 9170 BBHA9170442 01 Aug 2020 2Years Broadband Pre-Amplifier Coaxial Cable Coaxial Cable Coaxial Cable Schwarzbeck BBV 9719 9719-010 01 Aug 2020 2Years Schaffner Suhner Suhner RG 213/U RG 214/U Sucoflex_104 N/A N/A N/A 16 May 2020 16 May 2020 21 Dec 2019 LISN Rohde & Schwarz ENV216 101323 22 Jan 2020 Coaxial Cable Tyco Electronics RG 58C/U N/A 23 Oct 2019 Rohde & Schwarz TS8997 Testing System 1Year 1Year 1Year 1Year 1Year Spectrum Analyzer Rohde & Schwarz FSV 40 101190 08 Aug 2019 1Year OSP Rohde & Schwarz OSP OSP120 V02 08 Aug 2019 1Year FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 7 of 71 TEST REPORT Report No.
: AY0041769(5) 4.2 Supporting equipment Date :
Jul 28, 2019 Equipment Name Manufacturer Model Control board*
USB Charger Remark: *only used for configure engineering mode CSR Apple CSR USB-SPI Not labelled A1299 Not labelled Serial Provided by Applicant CMA 4.3 Cables Cable Type USB Cable*
Remark: *only used for configure engineering mode Shielding Not shielded Length 1m Ferrite used No Provided by CMA 4.4 Software Function Control the engineering mode of the device Remark: *only used for configure engineering mode Software Name CSR Bluesuite BlueTest3*
Version V2.6.8 Provided by Applicant 5.0 Measurement Uncertainty The reported uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2, providing a level of confidence of approximately 95%. Radiated emissions Frequency Uncertainty (Ulab) 30MHz ~ 200MHz (Horizontal) 30MHz ~ 200MHz (Vertical) 200MHz ~1000MHz (Horizontal) 200MHz ~1000MHz (Vertical) 1GHz ~6GHz 6GHz ~18GHz 18GHz~40GHz 4.59dB 4.49dB 4.94dB 4.97dB 4.52dB 4.58dB 4.66dB Line-conducted emissions Frequency 150kHz~30MHz Uncertainty (Ulab) 2.80dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 8 of 71 TEST REPORT Report No.
: AY0041769(5) 6.0 Measurement 6.1 General Test condition Date :
Jul 28, 2019 Temperature Test Voltage Humidity Atmosphere Pressure
: 28.9C
: DC 3.7V and AC 120V
: 48.2%
: 100.2kPa 6.2 Number of hopping frequency 6.2.1 Measurement Requirement Measuring procedure Span RBW VBW Frequency range Modulation tested Packet Type tested Additional measuring procedure 6.2.2 Final Result
: FCC Part 15 15.247(a)(1)(iii)
: ANSI C63.10:2013, clause 7.8.3
: 83.5MHz
: 300kHz
: 300kHz
: 2.4000 2.4835GHz
: GFSK
: DH5
: Nil No. of hopping channels measured 79 Limit 15 Result PASS Worst case mode GFSK and DH5 Remark: Detail test result and equipment setting refer to appendix A, A4 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 9 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Band-edge measurement 6.3 6.3.1 Measurement Requirement Measuring procedure Hopping mode RBW VBW Frequency range Modulation tested Packet Type tested Channel tested for non-
hopping mode Additional measuring procedure
: FCC Part 15 15.247(d)
: ANSI C63.10:2013, section 7.8.6 and 6.10
: Enabled and Disable
: 100kHz
: 300kHz
: 2310 2400MHz and 2483.5 2500MHz
: GFSK, p /4DQPSK, 8DPSK
: DH5, 2DH5, 3DH5
: 2402MHz for lowed band edge and 2480MHz for higher band edge
: For lower band edge (2400MHz) 1. Using the Measurement 1 setting shown below the scan plot within the frequency span from 2400 2483.5MHz to measure the maximum peak value of fundamental 2. Using the Measurement 2 setting shown below the scan plot within the freqeunc y span from 2310 2400MHz to measure the bandedge reading 3. Compare that reading in procedure with the limit which equal to the measured maximum peak in procedure 1minus 20dB For Upper bandedge (2483.5MHz) 1. Using the Measurement 1 setting shown below the scan plot within the frequency span from 2400 2483.5MHz to measure the maximum peak value of fundamental 2. Using the Measurement 2 setting shown below the scan plot within the freqeunc y span from 2483.5 2500MHz to measure the bandedge reading 3. Compare that reading in procedure with the limit which equal to the measured maximum peak in procedure 1minus 20dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 10 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 6.3.2 Final Result Bandedge frequency for lower bandedge
(Worst Case) 2399.62500 Bandedge frequency for higher bandedge
(Worst Case) 2483.525000 Worst case
(dBc)2 41.8 Worst case in
(dBc)2 56.1 Detector Limit1
(dBc) Result Worst case Peak Detector 20.0 Limit1 PASS GFSK and DH5 Result Worst case Peak 20.0 PASS GFSK and DH5 Remark: 1) The limit is based on the transmitter demonstrated compliance with peak conducted power limit on section 6.4.2 of this report. 2) The Worst case dBc is the peak values measured in procedure 1 minus the worst case bandedge emission 3) Detail test result and equipment setting refer to appendix A, A5-8, A19-20, A35-36 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 11 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Carrier Frequency Separation 6.4 6.4.1 Measurement Requirement Measuring procedure Hopping mode RBW VBW Frequency range Modulation tested Packet Type tested Additional measuring procedure Remark
: FCC Part 15 15.247(a)
: ANSI C63.10:2013, section 7.8.2
: Enabled
: 300kHz
: 300kHz
: 2401-2404MHz, 2440-2443MHz, 2478-2481MHz
: GFSK2
: DH52
: Nil
:
1) Since the measured value is more than 1.5 times of limit, only middle channel is measured. 2) Since the modulation and packet type does not affect the channel separation, GFSK and DH5 are selected as represented modulation and data type 6.4.2 Final Result Carrier Frequency Separation 1.009900MHz Limit1 Result Worst case mode 0.846667MHz PASS GFSK and DH5 Remark: 1) Limit is 2/3 of the 20dB bandwidth in section 6.7 and conducted peak power is less than 0.125W in section 6.6 of this report. 2) Detail test result and equipment setting refer to appendix A, A37-39 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 12 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Time of occupancy (dwell time) 6.5 6.5.1 Measurement Requirement Measuring procedure Hopping mode RBW VBW Modulation tested Packet Type tested Channel tested for non-
hopping mode Additional measuring procedure
: FCC Part 15 15.247(a)
: ANSI C63.10:2013, section 7.8.4
: Disable
: 500kHz
: 1MHz
: GFSK3
: DH1, DH3, DH5
: 2441MHz
:
1) Setup engineering sample to channel 2441MHz and DH1 packet size to perform the measurement according to ANSI C63.10, section 7.8.4 2) Find the worst case packet size 3) Repeat procedure1 with the worst case packet size for Remark
:
channel 2402MHz and 2480MHz 1) Since the modulation does not affect the dwell time, GFSK is selected as represented modulation. 6.5.2 Final Result Dwell time (worst case) Limit 313.000ms 400ms Result PASS Worst case mode GFSK and DH5 Remark: 1) Detail test result and equipment setting refer to appendix A, A9-11 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 13 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Output Power 6.6 6.6.1 Measurement Requirement Measuring procedure Hopping mode Modulation tested Packet Type tested Channel tested for non-
hopping mode Additional measuring procedure Remark 6.6.2 Final Result
: FCC Part 15 15.247(b) (1)
: ANSI C63.10:2013, section 7.8.5
: Disable
: GFSK, p /4DQPSK, 8DPSK
: DH51
: 2402MHz, 2441MHz, 2480MHz
: Nil
:
1) Since the packet size does not affect the output power, DH5 is selected as represented packet size.
(a) Maximum peak conducted outputpwer Maximum peak conducted output power Limit(s)1 Result 3.0dBm 3.0dBm 3.0dBm 21.0dBm 21.0dBm 21.0dBm PASS PASS PASS Modulation GFSK p /4DQPSK 8DPSK Remark: 1) 0.125W (21.0dBm) limit is used for 2/3 20dB bandwidth requirement for channel separation. 2) Detail test result and equipment setting refer to appendix A, A15, A24, A31
(b) Maximum peak e.i.r.p. Maximum peak e.i.r.p.1 Limit(s)2 5.0dBm 5.0dBm 5.0dBm 27.0dBm 27.0dBm 27.0dBm Result PASS PASS PASS Modulation GFSK p /4DQPSK 8DPSK Remark: 1) Maximum peak e.i.r.p. = Maximum peak conducted output power + antenna gain (dBi) 2) Maximum peak e.i.r.p. limit = Maximum peak conducted ouput power limit + 6dBi 3) Detail test result and equipment setting refer to appendix A, A15, A24, A31 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 14 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Occupied Bandwidth 6.7 6.7.1 Measurement Requirement Measuring procedure Hopping mode Modulation tested Packet Type tested Channel tested for non-
hopping mode Additional measuring procedure Remark 6.7.2 Final Result
: FCC Part 15 15.247(a)
: ANSI C63.10:2013, section 7.8.7 and 6.9.2
: Disable
: GFSK, p /4DQPSK, 8DPSK
: DH51
: 2402MHz, 2441MHz, 2480MHz
: Nil
:
1) Since the packet size does not affect the bandwidth, DH5 is selected as represented packet size. 20dB bandwidth 960.0kHz 1250.0kHz 1270.0kHz 99% OBW 860.0kHz 1190.0kHz 1200.0kHz Modulation GFSK p /4DQPSK 8DPSK Remark: 1) Detail test result and equipment setting refer to appendix A, A12-14, A16-18, A21-23, A25-30, A32-34. FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 15 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Conducted Spurious emission (Transmitter) 6.8 6.8.1 Measurement
: FCC Part 15 15.247(d)
: ANSI C63.10:2013, section 5.5, 5.6, 7.8.8 and 11.12.2.1
: Disable
: Refer to pre-measurement and final measurement setting
: Refer to pre-measurement and final measurement setting
: GFSK1
: DH52
:
:
:
1) Setup engineering sample to channel 2402MHz to perform the measurement according to ANSI C63.10, section 7.8.8 with pre-measurement setting 2) If the pre-measurement is over the limit, the final measurement is performed for the specific frequency according to fina measurement setting or restricted band frequency 3) For non-restricted band frequency, peak detector and 100kHz RBW will be used for final measurement. 4) Repeat the procedure 1 to 3 for channel frequency of 2441MHz and 2480MHz 1) Since the GFSK generates a higher SPD with power level, GFSK is selected as represented modulation for testing. 2) Since DH5 generates a higher dwell time, DH5 is selected as respresentative packet size for testing Limit2 Margin Result Worst case mode Requirement Measuring procedure Hopping mode RBW Detector Modulation tested Packet Type tested Channel tested for non-
hopping mode Additional measuring procedure Remark 6.8.2 Final Result Worst case spurious emission frequency Worst case spurious emission power1
-38.5dBm 2399.945000MHz GFSK and DH5 Remark: 1) Spurious emission power = measured conducted power + antnenna gain(dBi) +ground
-23.2dBm
-15.3dB PASS reflection factor according to ANSI C63.10 section 11.12.2.2 for restricted band emission. 2) For restricted band emission, limit = restricted band field strength limit (dBuV/m) 9.54 + 104.75dB according to ANSI C63.10 section 11.12.2.2 For non-restricted band , limit = SPD/100kHz 20dB. 3) Detail test result and equipment setting refer to appendix A, A40-45 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 16 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Radiated Spurious emission (Transmitter) 6.9 6.9.1 Measurement The equipment under test (EUT) was placed on a non-conductive turntable with dimensions of 1.5m x 0.4m and 0.8m high above the ground for below 1GHz measurement and 1.5m high above the ground for above 1GHz measurement. 3m from the EUT, a broadband antenna mounting on the mast received the signal strength. The turntable was rotated to maximize the emission level. The antenna was then moving along the mast from 1m up to 4m until no more higher value was found. Both horizontal and vertical polarization of the antenna were placed and investigated. For below 30MHz, a loop antenna with its vertical plane is placed 3m from the EUT and rotated about its vertical axis for maximum response at each azimuth about the EUT. And the centre of the loop shall be 1 m above the ground. For 30MHz to 300MHz, biconical antenna with its vertical and horizontal plane is placed 3m from the EUT and rotated about its vertical and horizontal axis for maximum response at each azimuth about the EUT. And the reference point of antenna shall be 1 m above the ground. Same procedure for frequency 300MHz to 1000MHz but Log-periodic antenna is used for final measurements. For above 1GHz, horn antenna with its vertical and horizontal plane is placed 3m from the EUT and rotated about its vertical and horizontal axis for maximum response at each azimuth about the EUT. Preamplifier and High Pass filter was used for measurements. The reference point of antenna shall be 1 m above the ground. The device was rotated through three X, Y, Z orthogonal to determine which attitude and configuration produce the highest emission during measurement for Radiated Emission measurement. The Frequencies from fundamental up to the tenth harmonics were investigated, and emissions more 20dB below limit were not reported. Bluetooth hopping + charging mode with GFSK modulation and DH5 packet type are selected as worst case mode for spurious radiated emission test from cabinet. FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 17 of 71 TEST REPORT Report No.
: AY0041769(5) 6.9.2 Final Result Date :
Jul 28, 2019 a) Test mode: Bluetooth + charging mode Polarization Frequency
(MHz) Reading at 3m
(dBm V) Transducer Factor
(dB/m) Field Strength at 3m1
(dBm V/m) Limit at 3m
(dBm V/m) Margin
(dB) Detector
(PK/
QP/AV) V H V H H H V H H H H V V H H H H V V H H H H 77.559 123.206 134.617 203.069 247.936 341.684 342.540 2400.000 2400.000 2483.500 2483.500 4803.865 4803.889 4882.019 4882.135 4959.808 4960.213 7205.842 7206.152 7323.017 7323.228 7440.100 7440.102 9.9 11.6 11.3 8.8 11.6 17.6 16.0 64.0 32.5 64.2 31.1 58.3 27.9 58.6 25.8 61.0 30.0 46.3 22.0 52.9 26.3 53.1 22.9 9.8 12.6 12.6 14.5 14.5 16.9 16.9
-4.7
-4.7
-4.7
-4.7 2.3 2.3 2.3 2.3 2.8 2.8 9.6 9.6 9.6 9.6 9.6 9.6 19.7 24.2 23.9 23.3 26.1 34.5 32.9 59.3 27.8 59.5 26.4 60.6 30.2 60.9 28.1 63.8 32.8 55.9 31.6 62.5 35.9 62.7 32.5 40.0 43.5 43.5 43.5 46.0 46.0 46.0 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0
-20.3
-19.3
-19.6
-20.2 QP QP QP QP QP QP QP Peak
-19.9
-11.5
-13.1
-14.7
-26.2 Average
-14.5 Peak Peak
-27.6 Average
-13.4
-23.8 Average
-13.1
-25.9 Average
-10.2 Peak Peak Peak
-21.2 Average
-18.1
-22.4 Average
-11.5
-18.1 Average
-11.3 Peak Peak
-21.5 Average Remark: 1) Field Strength = Reading + transducer factor. 2) Other emission with more than 20dB margin are not reported in this report. FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 18 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT 6.10 Radiated Spurious emission (other mode) 6.10.1 Measurement The equipment under test (EUT) was placed on a non-conductive turntable with dimensions of 1.5m x 0.4m and 0.8m high above the ground for below 1GHz measurement and 1.5m high above the ground for above 1GHz measurement. 3m from the EUT, a broadband antenna mounting on the mast received the signal strength. The turntable was rotated to maximize the emission level. The antenna was then moving along the mast from 1m up to 4m until no more higher value was found. Both horizontal and vertical polarization of the antenna were placed and investigated. For below 30MHz, a loop antenna with its vertical plane is placed 3m from the EUT and rotated about its vertical axis for maximum response at each azimuth about the EUT. And the centre of the loop shall be 1 m above the ground. For 30MHz to 300MHz, biconical antenna with its vertical and horizontal plane is placed 3m from the EUT and rotated about its vertical and horizontal axis for maximum response at each azimuth about the EUT. And the reference point of antenna shall be 1 m above the ground. Same procedure for frequency 300MHz to 1000MHz but Log-periodic antenna is used for final measurements. For above 1GHz, horn antenna with its vertical and horizontal plane is placed 3m from the EUT and rotated about its vertical and horizontal axis for maximum response at each azimuth about the EUT. Preamplifier and High Pass filter was used for measurements. The reference point of antenna shall be 1 m above the ground. The device was rotated through three X, Y, Z orthogonal to determine which attitude and configuration produce the highest emission during measurement for Radiated Emission measurement. The Frequencies from fundamental up to the tenth harmonics were investigated, and emissions more 20dB below limit were not reported. Receiving mode are selected for spurious radiated emission test from cabinet. FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 19 of 71 TEST REPORT Report No.
: AY0041769(5) 6.10.2 Final Result Test mode: Receiving mode Polarization Frequency
(MHz) Reading at 3m
(dBm V) Transducer Factor
(dB/m) Field Strength at 3m1
(dBm V/m) Date :
Jul 28, 2019 Limit at 3m
(dBm V/m) Margin
(dB) Detector
(PK/
QP/AV) H V H V V H H 56.192 90.909 111.510 149.624 182.763 216.091 248.047 14.2 16.8 19.3 16.0 13.3 14.6 18.5 10.4 10.2 11.2 13.5 15.3 14.5 14.5 24.6 27.0 30.5 29.5 28.6 29.1 33.0 40.0 43.5 43.5 43.5 43.5 46.0 46.0
-15.4
-16.5
-13.0
-14.0
-14.9
-16.9
-13.0 QP QP QP QP QP QP QP Remark: 1) Field Strength = Reading + transducer factor. 2) Other emission with more than 20dB margin are not reported in this report. FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 20 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Conducted Emission 6.11 6.11.1 Measurement Requirement Measuring procedure Test mode RBW VBW Modulation tested Packet Type tested Additional measuring procedure Remark 6.11.2 Final Result Worst case conducted emission frequency Worst case conducted emission
: FCC Part 15 15.207(a)
: ANSI C63.4:2014, section 7.3
: Bluetooth+charging
: 9kHz
: 30kHz
: GFSK
: DH5
: Nil
: Nil Limit Margin Detector Lines Worst case Result mode 17.4965MHz 39.53dBV 50.00dBV
-10.47dB AV N Bluetooth
+charging PASS Remark: 1) Detail test result and equipment setting refer to appendix A, A46-47 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 21 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Frequency Hopping System Requirement 7.0 Test Requirement: Section 15.247(a)(1), (g), (h) The system shall hop to channel frequencies that are selected at the system hopping rate from a Pseudorandom order list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. Frequency hopping spread spectrum systems are not required to employ all available hopping channels during each transmission. However, the system, consisting of both the transmitter and the receiver, must be designed to comply with all of the regulations in this section should the transmitter be presented with a continuous data (or information) stream. In addition, a system employing short transmssions bursts must comply with the definition of a frequency hopping system and must distribute its transmissions over the minimum number of hopping channels specified in this section. The incorporation of intelligence within a frequency hopping spread spectrum system that permits the system to recognize other users within the spectrum band so that it individually and independently chooses and adapts its hop sets to avoid hopping on occupied channels is permitted. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. Compliance for section 15.247(a)(1) According to Bluetooth Core Specification, the pseudorandom sequence may be generated in a nine-stage shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage. And the result is fed back to the input of the first stage. The sequence begins with the first ONE of 9 consecutive ONEs; i.e. the shift register is initialized with nine ones. Number of shift register stage: 9 Length of pseudorandom sequence: 29-1=511 bits Longest sequence of zero: 8 (non-inverted signal) Linear Feedback Shift Register for Generation of the PRBS sequence FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 22 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 An example of Pseudorandom Frequency Hopping Sequence as following:
Each frequency used equally on the average by each transmitter. According to Bluetooth Core Specification, Bluetooth receivers are designed to have input and IF bandwidths that match the hopping channel bandwidths of any Bluetooth transmitters and shift frequencies in synchronization with the transmitted signals. Compliance for section 15.247(g) According to Bluetooth Core Specification, the Bluetooth system transmits the packet with the pseudorandom hopping frequency with a continuous data and the short brust transmission from the Bluetooth system is also transmitted under the frequency hopping system with the pseudorandom hopping frequency system. Compliance for section 15.247(h) According to Bluetooth Core specification, the Bluetooth system incorporates with an adaptive system to detect other user within the spectrum band so that it individually and independently to avoid hopping on the occupied channels. According to the Bluetooth Core specification, the Bluetooth system is designed not have the ability to coordinate with other FHSS System in effort to avoid the simultaneous occupancy of the individual hopping frequencies by multiple transmitter. FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 23 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 External photo, Internal Photo and Test configuration Photo 8.0 The External Photo, Internal Photo and Test Configuration Photo associated with this report for the tested product are saved in separated pdf file listed in the following File content External Photo Internal Photo Test Configuration Photo File name 2AFF-KSBTAP2 External photo.pdf 2AFF-KSBTAP2 Internal photo.pdf 2AFF-KSBTAP2 Test setpu photo.pdf FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page 24 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT APPENDIX A Test Result FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A1 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 FCC Part 47 15.247 2400-2483.5 MHz 2016 TEST REPORT DUT Information Frequencies BT CH 0 (2402 MHz) BT CH 3 (2405 MHz) BT CH 6 (2408 MHz) BT CH 9 (2411 MHz) BT CH 12 (2414 MHz) BT CH 15 (2417 MHz) BT CH 18 (2420 MHz) BT CH 21 (2423 MHz) BT CH 24 (2426 MHz) BT CH 27 (2429 MHz) BT CH 30 (2432 MHz) BT CH 33 (2435 MHz) BT CH 36 (2438 MHz) BT CH 39 (2441 MHz) BT CH 42 (2444 MHz) BT CH 45 (2447 MHz) BT CH 48 (2450 MHz) BT CH 51 (2453 MHz) BT CH 54 (2456 MHz) BT CH 57 (2459 MHz) BT CH 60 (2462 MHz) BT CH 63 (2465 MHz) BT CH 66 (2468 MHz) BT CH 69 (2471 MHz) BT CH 72 (2474 MHz) BT CH 75 (2477 MHz) BT CH 78 (2480 MHz) Hardware Setup: WMS Measurements\TS8997 Spectrum Analyzer:
BT CH 1 (2403 MHz) BT CH 4 (2406 MHz) BT CH 7 (2409 MHz) BT CH 10 (2412 MHz) BT CH 13 (2415 MHz) BT CH 16 (2418 MHz) BT CH 19 (2421 MHz) BT CH 22 (2424 MHz) BT CH 25 (2427 MHz) BT CH 28 (2430 MHz) BT CH 31 (2433 MHz) BT CH 34 (2436 MHz) BT CH 37 (2439 MHz) BT CH 40 (2442 MHz) BT CH 43 (2445 MHz) BT CH 46 (2448 MHz) BT CH 49 (2451 MHz) BT CH 52 (2454 MHz) BT CH 55 (2457 MHz) BT CH 58 (2460 MHz) BT CH 61 (2463 MHz) BT CH 64 (2466 MHz) BT CH 67 (2469 MHz) BT CH 70 (2472 MHz) BT CH 73 (2475 MHz) BT CH 76 (2478 MHz) BT CH 2 (2404 MHz) BT CH 5 (2407 MHz) BT CH 8 (2410 MHz) BT CH 11 (2413 MHz) BT CH 14 (2416 MHz) BT CH 17 (2419 MHz) BT CH 20 (2422 MHz) BT CH 23 (2425 MHz) BT CH 26 (2428 MHz) BT CH 29 (2431 MHz) BT CH 32 (2434 MHz) BT CH 35 (2437 MHz) BT CH 38 (2440 MHz) BT CH 41 (2443 MHz) BT CH 44 (2446 MHz) BT CH 47 (2449 MHz) BT CH 50 (2452 MHz) BT CH 53 (2455 MHz) BT CH 56 (2458 MHz) BT CH 59 (2461 MHz) BT CH 62 (2464 MHz) BT CH 65 (2467 MHz) BT CH 68 (2470 MHz) BT CH 71 (2473 MHz) BT CH 74 (2476 MHz) BT CH 77 (2479 MHz) SA FSV 40 (SA FSV 40) @ VISA (ADR TCPIP::192.168.48.148::inst0::instr), SN 1321.3008K39/101190, FW 2.30 SP4 VG SMBV100A (VG SMBV100A) @ VISA (ADR TCPIP::192.168.48.149::inst0::instr), SN 262024, FW 3.1.19.8-
3.20.281.28.7 SMB100A (SMB100A) @ VISA (ADR TCPIP::192.168.48.152::inst0::instr), SN 103230, FW 3.20.390.24
/ Drv:Rev 2.21.0, 07/2016, CVI 2015 Vector Generator:
Generator:
FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A2 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT OSP:
OSP-B157W (OSP-B157W) @ VISA (ADR TCPIP::192.168.48.157::inst0::instr), SN 1527.1144.03 / 101057, FW 1.23.0.2 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A3 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Hopping Frequencies (Hopping; GFSK, DH5) Channels Channels 79 Limit Min 15
--- PASS Limit Max Result 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 2400 2410 2420 2430 2440 2450 2460 2470 2483.5 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40000 GHz 2.48350 GHz 83.500 MHz 200.000 kHz 200.000 kHz 418 1.060 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 71 / max. 150 3 / 3 0.17 dB Target Value 2.40000 GHz 2.48350 GHz 83.500 MHz
<= 299.000 kHz
>= 200.000 kHz
~ 418 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A4 of 71 TEST REPORT Report No.
: AY0041769(5) Band Edge low (Hopping; GFSK; DH5) Result DUT Frequency Result
(MHz) Date :
Jul 28, 2019 hopping PASS Inband Peak Frequency
(MHz) 2404.025000 Level
(dBm) 5.0 Frequency Measurements Level
(dBm)
-38.7
-38.9
-39.6
-41.2
-42.2
-42.2
-42.4
-42.6
-43.0
-43.1
-43.1
-44.6
-44.6
-44.8
-45.2
(MHz) 2399.625000 2399.675000 2399.575000 2399.725000 2399.375000 2399.775000 2399.825000 2399.525000 2399.475000 2399.425000 2399.325000 2399.175000 2399.225000 2399.925000 2399.975000 Margin
(dB) Limit
(dBm) Result 13.7 14.0 14.6 16.2 17.2 17.3 17.4 17.6 18.1 18.2 18.2 19.6 19.6 19.9 20.3
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS 10 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 23102320 2340 2360 2380 2400 2420 2440 2460 2483.5 Limit Sum Level Fail Frequency in MHz FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A5 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Measurement 1 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Measurement 2 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.31000 GHz 2.40000 GHz 90.000 MHz 100.000 kHz 300.000 kHz 1800 1.800 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 15 / max. 150 3 / 3 0.00 dB Instrument Value 2.40000 GHz 2.48350 GHz 83.500 MHz 100.000 kHz 300.000 kHz 1670 1.670 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 141 / max. 150 3 / 3 0.00 dB Target Value 2.31000 GHz 2.40000 GHz 90.000 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 1800 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB Target Value 2.40000 GHz 2.48350 GHz 83.500 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 1670 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A6 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Band Edge high (Hopping; GFSK; DH5) Result DUT Frequency Result
(MHz) hopping PASS Inband Peak Frequency
(MHz) 2405.025000 Level
(dBm) 5.0 Frequency Measurements Level
(dBm)
-53.5
-53.6
-55.4
-55.5
-56.0
-56.3
-56.3
-56.4
-56.4
-56.5
-56.6
-56.6
-56.7
-56.7
-56.8
(MHz) 2484.025000 2483.975000 2484.575000 2484.625000 2498.225000 2498.175000 2484.675000 2499.675000 2490.525000 2495.125000 2495.175000 2499.625000 2498.275000 2490.575000 2486.625000 Margin
(dB) Limit
(dBm) Result 28.6 28.6 30.5 30.5 31.0 31.3 31.3 31.4 31.5 31.6 31.6 31.6 31.7 31.7 31.8
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS
-25.0 PASS 10 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 2400 2420 2440 2460 Frequency in MHz 2480 2500 Limit Sum Level Fail FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A7 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Measurement 1 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Measurement 2 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40000 GHz 2.48350 GHz 83.500 MHz 100.000 kHz 300.000 kHz 1670 1.670 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 135 / max. 150 3 / 3 0.00 dB Target Value 2.40000 GHz 2.48350 GHz 83.500 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 1670 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB Instrument Value 2.48350 GHz 2.50000 GHz 16.500 MHz 100.000 kHz 300.000 kHz 330 37.969 s 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold FFT off Trace 0.50 dB 4 / max. 150 3 / 3 0.00 dB Target Value 2.48350 GHz 2.50000 GHz 16.500 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 330 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A8 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Time of Channel Occupancy (2441 MHz; GFSK; DH1) Result DUT Frequency Result
(MHz) Number of Hops Average time of occupancy Threshold
(dBm)
(ms) 2441.000000 PASS 319 134.820
-16.0 5 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 0 5 10 15 Time in s 20 25 31.6 Trace Threshold Measurement Setting Instrument Value Target Value Center Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Trigger Trigger Offset OSP Setting Measurement Time Tracepoints Time resolution Detector 2.44100 GHz ZeroSpan 500.000 kHz 1.000 MHz 30001 31.600 s
-10.000 dBm 0.000 dB MaxPeak 1 Channel Clear Write Sweep off External 0.000 s 2.44100 GHz ZeroSpan
~ 650.000 kHz
~ 1.500 MHz
~ 30001 31.600 s
-10.000 dBm 0.000 dB MaxPeak 1 Channel Clear Write AUTO off External 0.000 s Instrument Value 31.600 s 31600000 1.000 s RMS Target Value 31.600 s 31600000 1.000 s RMS FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A9 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Time of Channel Occupancy(2) (2441 MHz; GFSK;DH3) Result DUT Frequency Result
(MHz) Number of Hops Average time of occupancy Threshold
(dBm)
(ms) 2441.000000 PASS 159 268.340
-16.0 5 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 0 5 10 15 Time in s 20 25 31.6 Trace Threshold Measurement Setting Instrument Value Target Value Center Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Trigger Trigger Offset OSP Setting Measurement Time Tracepoints Time resolution Detector 2.44100 GHz ZeroSpan 500.000 kHz 1.000 MHz 30001 31.600 s
-10.000 dBm 0.000 dB MaxPeak 1 Channel Clear Write Sweep off External 0.000 s 2.44100 GHz ZeroSpan
~ 650.000 kHz
~ 1.500 MHz
~ 30001 31.600 s
-10.000 dBm 0.000 dB MaxPeak 1 Channel Clear Write AUTO off External 0.000 s Instrument Value 31.600 s 31600000 1.000 s RMS Target Value 31.600 s 31600000 1.000 s RMS FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A10 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Time of Channel Occupancy(3) (2441 MHz; GFSK; DH5) Result DUT Frequency Result
(MHz) Number of Hops Average time of occupancy Threshold
(dBm)
(ms) 2441.000000 PASS 106 313.000
-16.0 5 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 0 5 10 15 Time in s 20 25 31.6 Trace Threshold Measurement Setting Instrument Value Target Value Center Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Trigger Trigger Offset OSP Setting Measurement Time Tracepoints Time resolution Detector 2.44100 GHz ZeroSpan 500.000 kHz 1.000 MHz 30001 31.600 s
-10.000 dBm 0.000 dB MaxPeak 1 Channel Clear Write Sweep off External 0.000 s 2.44100 GHz ZeroSpan
~ 650.000 kHz
~ 1.500 MHz
~ 30001 31.600 s
-10.000 dBm 0.000 dB MaxPeak 1 Channel Clear Write AUTO off External 0.000 s Instrument Value 31.600 s 31600000 1.000 s RMS Target Value 31.600 s 31600000 1.000 s RMS FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A11 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Emission Bandwidth 20 dB (2402 MHz; GFSK, DH5) 20 dB Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) 2402.000000 0.960000
---
---
2401.525000 Band Edge Right
(MHz) 2402.485000 960.000 kHz 2402 Frequency in MHz 2402.5 2403 2403.3 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 2400.7 2401 2401.5 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40070 GHz 2.40330 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 13 / max. 150 5 / 5 0.38 dB Target Value 2.40070 GHz 2.40330 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A12 of 71 TEST REPORT
: AY0041769(5) Report No. Emission Bandwidth 20 dB(2) (2402 MHz; p 20 dB Bandwidth Date :
Jul 28, 2019 p /4DQPSK; 2DH5) Band Edge Right
(MHz) 2402.615000 DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) 2402.000000 1.250000
---
---
2401.365000 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 1.250 MHz 2400.7 2401 2401.5 2402 Frequency in MHz 2402.5 2403 2403.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40070 GHz 2.40330 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 22 / max. 150 5 / 5 0.11 dB Target Value 2.40070 GHz 2.40330 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A13 of 71 p p TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Emission Bandwidth 20 dB(3) (2402 MHz; 8DPSK; 3DH5) 20 dB Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) 2402.000000 1.270000
---
---
2401.345000 Right
(MHz) 2402.615000 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 2400.7 2401 2401.5 1.270 MHz 2402 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40070 GHz 2.40330 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 10 / max. 150 5 / 5 0.39 dB Target Value 2.40070 GHz 2.40330 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB 2402.5 2403 2403.3 FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A14 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT RF output power (2402 MHz; GFSK, DH5) Result DUT Frequency
(MHz) 2402.000000 Gated RMS
(dBm) Limit Max
(dBm)
(dBm) Gated EIRP DutyCycle Result
(%) 77.894 PASS 3.0 21.0 3.0 3.005 dBm 26 20 10 0
-10
-20
-30
-40 m B d n i l e v e L 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 777.26 Gated Trace Overall Limit Time in ms FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A15 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Occupied Channel Bandwidth 99% (2402 MHz; GFSK; DH5) 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2402.425000 2402.000000 0.860000
---
---
2401.565000 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 860.000 kHz 2400.7 2401 2401.5 2402 Frequency in MHz 2402.5 2403 2403.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40070 GHz 2.40330 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 14 / max. 150 3 / 3 0.19 dB Target Value 2.40070 GHz 2.40330 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A16 of 71 TEST REPORT
: AY0041769(5) Report No. Occupied Channel Bandwidth 99%(2) (2402 MHz; p 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) Date :
Jul 28, 2019 p /4DQPSK; 2DH5) Band Edge Right
(MHz) 2402.585000 2402.000000 1.190000
---
---
2401.395000
(
5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 1.190 MHz 2400.7 2401 2401.5 2402 Frequency in MHz 2402.5 2403 2403.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40070 GHz 2.40330 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 17 / max. 150 3 / 3 0.12 dB Target Value 2.40070 GHz 2.40330 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A17 of 71 p p TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Occupied Channel Bandwidth 99%(3) (2402 MHz; 8DPSK; 3DH5) 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2402.575000 2402.000000 1.190000
---
---
2401.385000 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 1.190 MHz 2400.7 2401 2401.5 2402 Frequency in MHz 2402.5 2403 2403.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40070 GHz 2.40330 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 17 / max. 150 3 / 3 0.17 dB Target Value 2.40070 GHz 2.40330 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A18 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Band Edge low (2402 MHz; GFSK; DH5) Result DUT Frequency Result
(MHz) 2402.000000 PASS Inband Peak Frequency
(MHz) 2402.025000 Level
(dBm) 5.3 Frequency Measurements Level
(dBm)
-36.5
-37.0
-37.9
-38.5
-38.7
-38.8
-39.2
-39.5
-39.5
-40.3
-40.4
-40.6
-41.3
-41.5
-42.5
(MHz) 2399.625000 2399.675000 2399.575000 2399.725000 2399.425000 2399.375000 2399.875000 2399.925000 2399.475000 2399.825000 2399.525000 2399.325000 2399.975000 2399.775000 2399.225000 Margin
(dB) Limit
(dBm) Result 11.8 12.3 13.2 13.8 13.9 14.1 14.5 14.8 14.8 15.6 15.7 15.9 16.6 16.7 17.8
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS
-24.7 PASS 10 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 23102320 2340 2360 2380 2400 2420 2440 2460 2483.5 Limit Sum Level Fail Frequency in MHz FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A19 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Measurement 1 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Measurement 2 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.31000 GHz 2.40000 GHz 90.000 MHz 100.000 kHz 300.000 kHz 1800 1.800 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 12 / max. 150 3 / 3 0.04 dB Instrument Value 2.40000 GHz 2.48350 GHz 83.500 MHz 100.000 kHz 300.000 kHz 1670 1.670 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 12 / max. 150 3 / 3 0.29 dB Target Value 2.31000 GHz 2.40000 GHz 90.000 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 1800 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB Target Value 2.40000 GHz 2.48350 GHz 83.500 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 1670 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A20 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Emission Bandwidth 20 dB (2441 MHz; GFSK; DH5) 20 dB Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) 2441.000000 0.960000
---
---
2440.525000 Band Edge Right
(MHz) 2441.485000 2441.5 2442 2442.3 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 2439.7 2440 2440.5 960.000 kHz 2441 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.43970 GHz 2.44230 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 12 / max. 150 5 / 5 0.31 dB Target Value 2.43970 GHz 2.44230 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A21 of 71 TEST REPORT
: AY0041769(5) Report No. Emission Bandwidth 20 dB(2) (2441 MHz; p 20 dB Bandwidth Date :
Jul 28, 2019 p /4DQPSK; 2DH5) DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) 2441.000000 1.250000
---
---
2440.365000 Band Edge Right
(MHz) 2441.615000 2441.5 2442 2442.3 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 2439.7 2440 2440.5 1.250 MHz 2441 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.43970 GHz 2.44230 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 11 / max. 150 5 / 5 0.24 dB Target Value 2.43970 GHz 2.44230 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A22 of 71 p p TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Emission Bandwidth 20 dB(3) (2441 MHz; 8DPSK; 3DH5) 20 dB Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2441.615000 2441.000000 1.260000
---
---
2440.355000 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 1.260 MHz 2439.7 2440 2440.5 2441 Frequency in MHz 2441.5 2442 2442.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.43970 GHz 2.44230 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 16 / max. 150 5 / 5 0.34 dB Target Value 2.43970 GHz 2.44230 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A23 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT RF output power (2441 MHz; GFSK; DH5) Result DUT Frequency
(MHz) 2441.000000 Gated RMS
(dBm) Limit Max
(dBm)
(dBm) Gated EIRP DutyCycle Result
(%) 77.894 PASS 2.5 21.0 2.5 2.462 dBm 26 20 10 0
-10
-20
-30
-40 m B d n i l e v e L 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 777.26 Gated Trace Overall Limit Time in ms FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A24 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Occupied Channel Bandwidth 99% (2441 MHz; GFSK; DH5) 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2441.415000 2441.000000 0.850000
---
---
2440.565000 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 850.000 kHz 2439.7 2440 2440.5 2441 Frequency in MHz 2441.5 2442 2442.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.43970 GHz 2.44230 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 12 / max. 150 3 / 3 0.13 dB Target Value 2.43970 GHz 2.44230 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A25 of 71 TEST REPORT
: AY0041769(5) Report No. Occupied Channel Bandwidth 99%(2) (2441 MHz; p 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) Date :
Jul 28, 2019 p /4DQPSK; 2DH5) 2441.000000 1.180000
---
---
2440.395000 Band Edge Right
(MHz) 2441.575000 2441.5 2442 2442.3 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 2439.7 2440 2440.5 1.180 MHz 2441 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.43970 GHz 2.44230 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 8 / max. 150 3 / 3 0.23 dB Target Value 2.43970 GHz 2.44230 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A26 of 71 p p TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Occupied Channel Bandwidth 99%(3) (2441 MHz; 8DPSK; 3DH5) 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2441.585000 2441.000000 1.200000
---
---
2440.385000 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 1.200 MHz 2439.7 2440 2440.5 2441 Frequency in MHz 2441.5 2442 2442.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.43970 GHz 2.44230 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 11 / max. 150 3 / 3 0.04 dB Target Value 2.43970 GHz 2.44230 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A27 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Emission Bandwidth 20 dB (2480 MHz; GFSK; DH5) 20 dB Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) 2480.000000 0.940000
---
---
2479.535000 Band Edge Right
(MHz) 2480.475000 2480.5 2481 2481.3 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 2478.7 2479 2479.5 940.000 kHz 2480 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47870 GHz 2.48130 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 20 / max. 150 5 / 5 0.00 dB Target Value 2.47870 GHz 2.48130 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A28 of 71 TEST REPORT
: AY0041769(5) Report No. Emission Bandwidth 20 dB(2) (2480 MHz; p 20 dB Bandwidth Date :
Jul 28, 2019 p /4DQPSK; 2DH5) DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) 2480.000000 1.250000
---
---
2479.365000 Band Edge Right
(MHz) 2480.615000 2480.5 2481 2481.3 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 2478.7 2479 2479.5 1.250 MHz 2480 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47870 GHz 2.48130 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 21 / max. 150 5 / 5 0.09 dB Target Value 2.47870 GHz 2.48130 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A29 of 71 p p TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Emission Bandwidth 20 dB(3) (2480 MHz; 8DPSK; 3DH5) 20 dB Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2480.615000 2480.000000 1.270000
---
---
2479.345000 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 1.270 MHz 2478.7 2479 2479.5 2480 Frequency in MHz 2480.5 2481 2481.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47870 GHz 2.48130 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold FFT off Trace 0.50 dB 13 / max. 150 5 / 5 0.20 dB Target Value 2.47870 GHz 2.48130 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 5 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A30 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT RF output power (2480 MHz; GFSK; DH5) Result DUT Frequency
(MHz) 2480.000000 Gated RMS
(dBm) Limit Max
(dBm)
(dBm) Gated EIRP DutyCycle Result
(%) 77.893 PASS 2.2 21.0 2.2 2.152 dBm 26 20 10 0
-10
-20
-30
-40 m B d n i l e v e L 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750774.32 Gated Trace Overall Limit Time in ms FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A31 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Occupied Channel Bandwidth 99% (2480 MHz; GFSK; DH5) 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) 2480.000000 0.850000
---
---
2479.565000 Right
(MHz) 2480.415000 2480.5 2481 2481.3 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 2478.7 2479 2479.5 850.000 kHz 2480 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47870 GHz 2.48130 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 21 / max. 150 3 / 3 0.03 dB Target Value 2.47870 GHz 2.48130 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A32 of 71 TEST REPORT
: AY0041769(5) Report No. Occupied Channel Bandwidth 99%(2) (2480 MHz; p 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left
(MHz) Date :
Jul 28, 2019 p /4DQPSK; 2DH5) Band Edge Right
(MHz) 2480.585000 2480.000000 1.190000
---
---
2479.395000 5 0
-5
-10
-15
-20
-25
-30
-35
-40
-45 m B d n i l e v e L 1.190 MHz 2478.7 2479 2479.5 2480 Frequency in MHz 2480.5 2481 2481.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47870 GHz 2.48130 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 15 / max. 150 3 / 3 0.17 dB Target Value 2.47870 GHz 2.48130 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A33 of 71 p p TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Occupied Channel Bandwidth 99%(3) (2480 MHz; 8DPSK; 3DH5) 99 % Bandwidth DUT Frequency
(MHz) Bandwidth
(MHz) Limit Min
(MHz) Limit Max
(MHz) Band Edge Left Band Edge
(MHz) Right
(MHz) 2480.585000 2480.000000 1.190000
---
---
2479.395000 5 0
-10
-20
-30
-40
-50 m B d n i l e v e L 1.190 MHz 2478.7 2479 2479.5 2480 Frequency in MHz 2480.5 2481 2481.3 Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47870 GHz 2.48130 GHz 2.600 MHz 20.000 kHz 100.000 kHz 260 94.727 s 0.000 dBm 20.000 dB MaxPeak 500 3 dB Max Hold FFT off Trace 0.30 dB 17 / max. 150 3 / 3 0.04 dB Target Value 2.47870 GHz 2.48130 GHz 2.600 MHz
>= 13.000 kHz
>= 60.000 kHz
~ 260 AUTO 0.000 dBm AUTO MaxPeak 500 3 dB Max Hold AUTO off Trace 0.30 dB max. 150 3 0.30 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A34 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Band Edge high (2480 MHz; GFSK; DH5) Result DUT Frequency Result
(MHz) 2480.000000 PASS Inband Peak Frequency
(MHz) 2480.025000 Level
(dBm) 4.4 Frequency Measurements Level
(dBm)
-51.7
-52.6
-52.8
-53.4
-53.5
-54.0
-54.3
-54.4
-54.5
-54.5
-54.5
-54.6
-54.6
-54.7
-54.7
(MHz) 2483.525000 2483.575000 2483.625000 2483.825000 2483.875000 2483.925000 2484.025000 2483.975000 2484.325000 2483.775000 2485.125000 2483.675000 2485.175000 2484.225000 2484.275000 Margin
(dB) Limit
(dBm) Result 26.1 27.0 27.3 27.9 27.9 28.4 28.8 28.8 28.9 28.9 28.9 29.1 29.1 29.1 29.2
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS
-25.6 PASS 5 0
-10
-20
-30
-40
-50
-60 m B d n i l e v e L 2400 2420 2440 2460 Frequency in MHz 2480 2500 Limit Sum Level Fail FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A35 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Measurement 1 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Measurement 2 Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40000 GHz 2.48350 GHz 83.500 MHz 100.000 kHz 300.000 kHz 1670 1.670 ms 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold Sweep off Trace 0.50 dB 9 / max. 150 3 / 3 0.03 dB Instrument Value 2.48350 GHz 2.50000 GHz 16.500 MHz 100.000 kHz 300.000 kHz 330 37.969 s 0.000 dBm 20.000 dB MaxPeak 100 3 dB Max Hold FFT off Trace 0.50 dB 4 / max. 150 3 / 3 0.00 dB Target Value 2.40000 GHz 2.48350 GHz 83.500 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 1670 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB Target Value 2.48350 GHz 2.50000 GHz 16.500 MHz
<= 100.000 kHz
>= 300.000 kHz
~ 330 AUTO 0.000 dBm AUTO MaxPeak 100 3 dB Max Hold AUTO off Trace 0.50 dB max. 150 3 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A36 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Carrier Frequency Separation (2402 MHz; GFSK; DH5) Result DUT Frequency
(MHz) Frequency Separation
(MHz) Limit Min
(MHz) Limit Max
(MHz) Center Frequency low Channel
(MHz) 2401.995050 Center Frequency high Channel
(MHz) 2402.975248 2402.000000 0.980198 0.846667
---
20 15 10 5 0
-5
-10
-15
-20
-25 m B d n i l e v e L 980.198 kHz 2401 2401.5 2402 2402.5 2403 2403.5 2404 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.40100 GHz 2.40400 GHz 3.000 MHz 300.000 kHz 300.000 kHz 101 1.000 ms 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold Sweep off Trace 0.50 dB 17 / max. 150 10 / 10 0.47 dB Target Value 2.40100 GHz 2.40400 GHz 3.000 MHz
<= 300.000 kHz
>= 300.000 kHz
~ 10 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold Sweep off Trace 0.50 dB max. 150 10 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A37 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Carrier Frequency Separation (2441 MHz; GFSK; DH5) Result DUT Frequency
(MHz) Frequency Separation
(MHz) Limit Min
(MHz) Limit Max
(MHz) Center Frequency low Channel
(MHz) 2440.995050 Center Frequency high Channel
(MHz) 2442.004950 2441.000000 1.009900 0.840000
---
35 30 25 20 15 10 5 0
-5
-10 m B d n i l e v e L 1.010 MHz 2440 2440.5 2441 2441.5 2442 2442.5 2443 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.44000 GHz 2.44300 GHz 3.000 MHz 300.000 kHz 300.000 kHz 101 1.000 ms 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold Sweep off Trace 0.50 dB 11 / max. 150 10 / 10 0.00 dB Target Value 2.44000 GHz 2.44300 GHz 3.000 MHz
<= 300.000 kHz
>= 300.000 kHz
~ 10 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold Sweep off Trace 0.50 dB max. 150 10 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A38 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019 Carrier Frequency Separation (2479 MHz; GFSK; DH5) Result DUT Frequency
(MHz) Frequency Separation
(MHz) Limit Min
(MHz) Limit Max
(MHz) Center Frequency low Channel
(MHz) 2478.995050 Center Frequency high Channel
(MHz) 2480.004950 2479.000000 1.009900 0.846667
---
15 10 5 0
-5
-10
-15
-20
-25
-30 m B d n i l e v e L 1.010 MHz 2478 2478.5 2479 2479.5 2480 2480.5 2481 Frequency in MHz Measurement Setting Start Frequency Stop Frequency Span RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference Instrument Value 2.47800 GHz 2.48100 GHz 3.000 MHz 300.000 kHz 300.000 kHz 101 1.000 ms 0.000 dBm 20.000 dB MaxPeak 200 3 dB Max Hold Sweep off Trace 0.50 dB 27 / max. 150 10 / 10 0.02 dB Target Value 2.47800 GHz 2.48100 GHz 3.000 MHz
<= 300.000 kHz
>= 300.000 kHz
~ 10 AUTO 0.000 dBm AUTO MaxPeak 200 3 dB Max Hold Sweep off Trace 0.50 dB max. 150 10 0.50 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A39 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Tx Spurious Emission (2402 MHz; GFSK; DH5) Result DUT Frequency Result
(MHz) 2402.000000 PASS Inband Peak Frequency
(MHz) 2405.025000 Level
(dBm) 6.8 Final measurements Frequency
(MHz) Level Pre Measurement level
(dBm) Limit
(dBm) Margin
(dB) Result
(dBm)
---
---
---
---
---
---
Pre Measurements Frequency Margin
(dB)
(MHz) 2399.975000 2399.525000 2399.575000 2399.475000 2399.625000 2399.925000 2399.875000 2399.675000 2399.425000 2399.825000 2399.725000 2399.775000 2399.375000 4803.975000 2399.325000 Level
(dBm)
-38.5
-38.9
-39.5
-40.0
-42.6
-42.9
-43.0
-43.2
-43.4
-43.5
-43.6
-43.7
-45.4
-47.1
-47.2 Limit
(dBm)
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2
-23.2 15.2 15.7 16.3 16.7 19.4 19.7 19.7 19.9 20.2 20.3 20.3 20.4 22.2 23.9 24.0 Measurement Settings Start Frequency Stop Frequency
(MHz)
(MHz) 30.000000 1500.000000 2400.000000 2483.500000 3983.500000 5483.500000 6983.500000 8483.500000 9983.500000 11483.500000 12983.500000 14483.500000 15983.500000 17483.500000 18983.500000 20483.500000 21983.500000 23483.500000 1500.000000 2400.000000 2483.500000 3983.500000 5483.500000 6983.500000 8483.500000 9983.500000 11483.500000 12983.500000 14483.500000 15983.500000 17483.500000 18983.500000 20483.500000 21983.500000 23483.500000 24983.500000 FCC ID: 2ADFF-KSBTAP2 Pre Measurement Final Measurement 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A40 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT 10 0
-10
-20
-30
-40
-50
-60
-70
-80 m B d n i l e v e L 30M 5060 80100M 200 300400500 8001G 2G 3G 4G5G6 810G 20G26G Final Critical Limit Sum Level Threshold Critical Frequency in Hz Pre Measurement 1 Setting Instrument Value RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference 100.000 kHz 300.000 kHz 29400 29.400 ms
-30.000 dBm 0.000 dB MaxPeak 30 3 dB Max Hold Sweep off Trace 1.00 dB 11 / max. 40 1 / 1 0.00 dB Target Value
<= 100.000 kHz
>= 300.000 kHz
~ 29400 AUTO
-30.000 dBm AUTO MaxPeak 30 3 dB Max Hold AUTO off Trace 1.00 dB max. 40 1 1.00 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A41 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Tx Spurious Emission (2441 MHz; GFSK; DH5) Result DUT Frequency Result
(MHz) 2441.000000 PASS Inband Peak Frequency
(MHz) 2405.025000 Level
(dBm) 6.5 Final measurements Frequency
(MHz) Level Pre Measurement level
(dBm) Limit
(dBm) Margin
(dB) Result
(dBm)
---
---
---
---
---
---
Pre Measurements Frequency Margin
(dB)
(MHz) 4882.075000 4882.025000 4881.975000 4881.675000 4881.625000 4881.725000 4882.325000 4882.375000 4882.275000 4881.925000 4881.775000 4881.875000 4882.175000 4882.125000 4881.825000 Level
(dBm)
-41.0
-41.1
-41.5
-41.6
-42.3
-42.5
-43.0
-43.1
-43.6
-43.7
-43.8
-44.3
-44.5
-44.5
-44.7 Limit
(dBm)
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5
-23.5 17.5 17.6 18.1 18.1 18.8 19.1 19.5 19.6 20.1 20.2 20.3 20.9 21.0 21.0 21.2 Measurement Settings Start Frequency Stop Frequency
(MHz)
(MHz) 30.000000 1500.000000 2400.000000 2483.500000 3983.500000 5483.500000 6983.500000 8483.500000 9983.500000 11483.500000 12983.500000 14483.500000 15983.500000 17483.500000 18983.500000 20483.500000 21983.500000 23483.500000 1500.000000 2400.000000 2483.500000 3983.500000 5483.500000 6983.500000 8483.500000 9983.500000 11483.500000 12983.500000 14483.500000 15983.500000 17483.500000 18983.500000 20483.500000 21983.500000 23483.500000 24983.500000 FCC ID: 2ADFF-KSBTAP2 Pre Measurement Final Measurement 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A42 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT 10 0
-20
-40
-60
-80 m B d n i l e v e L 30M 5060 80100M 200 300400500 8001G 2G 3G 4G5G 6 8 10G 20G26G Limit Critical Sum Level Final Critical Threshold Frequency in Hz Target Value
<= 100.000 kHz
>= 300.000 kHz
~ 29400 AUTO
-30.000 dBm AUTO MaxPeak 30 3 dB Max Hold AUTO off Trace 1.00 dB max. 40 1 1.00 dB Pre Measurement 1 Setting Instrument Value RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference 100.000 kHz 300.000 kHz 29400 29.400 ms
-30.000 dBm 0.000 dB MaxPeak 30 3 dB Max Hold Sweep off Trace 1.00 dB 21 / max. 40 1 / 1 0.82 dB FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A43 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Tx Spurious Emission (2480 MHz; GFSK; DH5) Result DUT Frequency Result
(MHz) 2480.000000 PASS Inband Peak Frequency
(MHz) 2405.025000 Level
(dBm) 6.3 Final measurements Frequency
(MHz) Level Pre Measurement level
(dBm) Limit
(dBm) Margin
(dB) Result
(dBm)
---
---
---
---
---
---
Pre Measurements Frequency Margin
(dB)
(MHz) 4959.675000 4960.025000 4959.975000 4959.625000 4959.725000 4960.075000 4960.325000 4960.375000 4959.925000 4960.275000 4959.775000 4960.125000 4959.825000 4960.175000 4960.425000 Level
(dBm)
-39.7
-39.7
-40.1
-40.2
-40.5
-40.7
-40.9
-41.0
-41.2
-41.7
-41.7
-42.3
-42.4
-42.8
-42.9 Limit
(dBm)
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7
-23.7 16.0 16.0 16.4 16.5 16.8 17.0 17.2 17.2 17.5 18.0 18.0 18.6 18.7 19.0 19.1 Measurement Settings Start Frequency Stop Frequency
(MHz)
(MHz) 30.000000 1500.000000 2400.000000 2483.500000 3983.500000 5483.500000 6983.500000 8483.500000 9983.500000 11483.500000 12983.500000 14483.500000 15983.500000 17483.500000 18983.500000 20483.500000 21983.500000 23483.500000 1500.000000 2400.000000 2483.500000 3983.500000 5483.500000 6983.500000 8483.500000 9983.500000 11483.500000 12983.500000 14483.500000 15983.500000 17483.500000 18983.500000 20483.500000 21983.500000 23483.500000 24983.500000 FCC ID: 2ADFF-KSBTAP2 Pre Measurement Final Measurement 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A44 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT 10 0
-20
-40
-60
-80 m B d n i l e v e L 30M 5060 80100M 200 300400500 8001G 2G 3G 4G5G 6 8 10G 20G26G Limit Critical Sum Level Final Critical Threshold Frequency in Hz Pre Measurement 1 Setting Instrument Value RBW VBW SweepPoints Sweeptime Reference Level Attenuation Detector SweepCount Filter Trace Mode Sweeptype Preamp Stablemode Stablevalue Run Stable Max Stable Difference 100.000 kHz 300.000 kHz 29400 29.400 ms
-30.000 dBm 0.000 dB MaxPeak 30 3 dB Max Hold Sweep off Trace 1.00 dB 17 / max. 40 1 / 1 0.00 dB FCC ID: 2ADFF-KSBTAP2 Target Value
<= 100.000 kHz
>= 300.000 kHz
~ 29400 AUTO
-30.000 dBm AUTO MaxPeak 30 3 dB Max Hold AUTO off Trace 1.00 dB max. 40 1 1.00 dB Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A45 of 71 Report No.
: AY0041769(5) Date :
Jul 28, 2019 TEST REPORT Conducted Emission Test mode: Bluetooth + charging FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A46 of 71 TEST REPORT Report No.
: AY0041769(5) Date :
Jul 28, 2019
***** End of Report *****
FCC ID: 2ADFF-KSBTAP2 Document name: FCC/ISED for FHSS - Document Ref No: RT-EL-EMC-048 - Issue Date: 13 Mar 2019 - Edition: 2 Page A47 of 71
1 | Test Setup Photo | Test Setup Photos | 485.82 KiB | August 08 2019 |
Worst case configuration photo FCC ID: 2ADFF-KSBTAP2 Test setup photo FCC ID: 2ADFF-KSBTAP2 FCC ID: 2ADFF-KSBTAP2
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-08 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-08-08
|
||||
1 | Applicant's complete, legal business name |
KONDOR LIMITED
|
||||
1 | FCC Registration Number (FRN) |
0024023921
|
||||
1 | Physical Address |
RADAR WAY CHRISTCHURCH BUSINESS PARK
|
||||
1 |
RADAR WAY
|
|||||
1 |
CHRISTCHURCH, N/A
|
|||||
1 |
United Kingdom
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
u******@sgs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ADFF
|
||||
1 | Equipment Product Code |
KSBTAP2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P**** L******
|
||||
1 | Title |
Mr
|
||||
1 | Telephone Number |
+44(0********
|
||||
1 | Fax Number |
+44 (********
|
||||
1 |
p******@kondor.co.uk
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
CMA Industrial Development Foundation Limited
|
||||
1 | Name |
A******** W****
|
||||
1 | Physical Address |
Room 1302, Yan Hing Centre
|
||||
1 |
Fo Tan, Shatin
|
|||||
1 |
Hong Kong
|
|||||
1 | Telephone Number |
852-2********
|
||||
1 |
a******@cmatesting.org
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AIRLINE ADAPTOR 2 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
CMA Industrial Development Foundation Limited
|
||||
1 | Name |
W****** L********
|
||||
1 | Telephone Number |
85226********
|
||||
1 | Fax Number |
85226********
|
||||
1 |
w******@cmatesting.org
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC