kitsound.co.uk The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners. All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Products showing the Crossed Through wheelie bin symbol must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer may operate a take-back scheme when you are ready to purchase a replacement product, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling. Please recycle this packaging responsibly. IMMERSE 75 ACTIVE NOISE CANCELLING WIRELESS HEADPHONES JB. 6798-a / REG05 / Made in China. KitSound is a trademark of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK USER MANUAL Getting started 1. Press and hold for 4 seconds 2. Connect to KS Immerse 75 3. Play your music Box contents Immerse 75 Active Noise Cancelling (ANC) Wireless Headphones Micro USB to 3.5 mm audio cable Micro USB charge cable User manual Carry pouch Functions 1. MFB (Multi-function Button) 2. Volume+/Next Track 3. Volume/Previous Track 4. LED Indicator 5. Micro USB Charging Port 6. Microphone 7. ANC LED 8. ANC Button 1 2 3 4 5 6 7 8 Further information is provided in the following pages of this manual. Note: For the purposes of this manual, ANC is shorthand for Active Noise Cancelling. 4 5 Instructions for use Getting started Charging the battery Give the headphones a full charge before their first use 1. Connect the micro USB charge cable to the Micro USB Charging Port (5) and plug into power 2. The LED Indicator (4) will be red whilst charging which will take up to 3 hours 3. Once fully charged the LED Indicator (4) will turn off Note: The first charge may take up to 3.5 hours to complete. Note: The LED Indicator (4) will flash red and a low battery tone will sound every 5 minutes to show low battery status, indicating that a recharge is required. Note: The next time you switch the headphones on they will automatically search for and attempt to connect to the last paired device. Note: If the music device is taken further than the transmission range of the headphone (10 metres) the headphone will enter a link-loss state. The headphone will be able to automatically re-pair to the music device when it comes back within the acceptable range. The link-loss period will last 10 minutes, if the device does not come back within range the headphone will begin searching for a new device. Note: If no connection is made with the headphones for more than 20 minutes the headphone will power off. Removing pairing records 1. From standby mode, hold MFB (1) together with Volume+ (2) for 5 seconds to delete pairing records Pairing the headphones to your device 1. Hold the MFB (1) down for 4 seconds. You will see the LED Indicator (4) flash white and enter pairing mode 2. Turn on your iOS, Android, or Windows devices Bluetooth ON and search for new devices 3. Select KS Immerse 75 from the list of found devices. If asked for a passcode, enter 0000 and the device will pair 4. Once connected, an audio tone will sound and the LED Indicator (4) will flash white every 10 seconds. You can then answer the phone or listen to your music 5. To power off the headphone, hold MFB (1) down for 3 seconds. You will see the LED Indicator (4) flash red for 1 second before turning off Re-pairing or pairing new devices 1. Turn Bluetooth connectivity off on any previously paired devices or remove pairing record as stated in the previous section of this manual 2. Follow the Pairing the headphones to your device instructions from step 1 6 7 Press MFB (1) to answer. You can adjust the volume by using Volume+ (2) or Volume (3) Hold MFB (1) for 1 second to reject the incoming call Press MFB (1) while in the call to end it Press MFB (1) twice in quick succession to redial the last phone number you called on your device Press MFB (1) twice in quick succession whilst in a call to mute the microphone and repeat to unmute the microphone Hold Volume+ (2) for 1 second in order to switch between the headphone microphone to the microphone of the handset Hold MFB (1) for 1 second and wait for audio tone before giving voice command to device. Note: This feature requires a compatible IOS or android handset Playing music Bluetooth Play/Pause Adjusting the volume Changing track Press MFB (1) Press Volume+ (2) or Volume (3). The volume can also be controlled on your device Press and hold Next Track (2) or Previous Track (3) Wired use 1. Turn off the headphones 2. Plug the micro USB to 3.5 mm audio cable into the Micro USB Charging Port (5) and the other end into your device Note: All functions are controlled via your device. Call handling Answer a call Reject a call End call Redial Mute microphone Switch microphone Voice dialling 8 9 Noise Cancellation The ANC Button (8) can be used to toggle the active noise cancellation on and off when using the headphones. When ANC is turned on, the ANC LED (7) will shine green. ANC on/off (with Bluetooth audio) ANC on/off
(without Bluetooth audio) Upon start-up the headphones will enter Bluetooth mode with ANC automatically turned on. Short press ANC Button (8) to toggle ANC mode on/off. Bluetooth mode will automatically enter standby after 20 minutes without a signal. ANC will continue to work, please be sure to manually turn off ANC after use. Whilst the headphones are powered off, short press ANC Button (8) to toggle ANC mode on/off. In this mode the headphone will reduce background noise after without the use of the Bluetooth music function. Note: User must manually turn off the ANC in this mode after use to conserve battery. Note: The Bluetooth mode and ANC mode of the headphones operate separately, this enables the user to continue cancelling noise even when the music playback has finished. Perfect for sleeping on long journeys. Please always be sure to check the ANC status of the headphone after use and turn off the ANC function manually when powering off the headphones. 10 Specifications Bluetooth technology v5.0 Bluetooth connectivity distance Frequency band Transmission power S/N Frequency response Drivers Output RMS Battery Play time Charging time IP rating Working temperature Headphone (mm) Cable length Weight up to 10 m 2.402-2.480 GHz 4 dBM (conducted) 80 dB +/ 2 dB 20 Hz 20 kHz 40 mm 10 mW / 32 LiPo up to 15 hours (ANC + Bluetooth at 70% vol) up to 30 hours (Bluetooth only at 70% vol) up to 3 hours none
-10C ~ +55C H195 x W135 x D73 0.8 m 257 g 11 Troubleshooting We hope youve now got all the information you need to get started, but if youre having problems with anything, please feel free to contact us at: support@kitsound.co.uk Hereby, Kondor Ltd declares that the radio equipment type, Immerse 75, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents. FCC ID: 2ADFF-KSIMM75 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 12 13 The use and operation of this speaker is beyond our control. Warranty of the KS Immerse 75 is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We are sorry for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 14