REG02 International US and Canada Online FRONTCOVER DIGGIT XL OUTDOOR BLUETOOTH SPEAKER User Manual INNER LEAF Please read this manual carefully before use. WARNING Please dont get the product wet Please dont take the product apart. There are no user serviceable parts inside Please dont modify or alter the product or accessories Please dont expose the product to extreme temperatures or rapid changes of hot to cold or vice versa Please dont use damaged cables or plugs, or loose electrical sockets Please dont touch the device, cables, plugs, or the electrical socket with wet hands or other wet body parts Please dont pull the cable excessively when disconnecting it if the cable is not fixed Please dont bend or damage the cable Please dont drop or cause an impact to the product or the device Please dont place naked flame sources, such as lighted candles, on the product Battery Information Batteries may malfunction if they are not used for extended periods Over time, unused devices will discharge and must be recharged before use Disconnect the charger from power sources when not in use Use the batteries only for their intended purposes Follow all instructions in this manual to ensure the longest lifespan of your device and battery. Damages or poor performance caused by failure to follow warnings and instructions can void your manufacturers warranty QA-MRK-FM-08-02 v1 IP66 This speaker is rated IP66. The first 6 means that the KS Diggit XL is protected against dust and contact. The second 6 means it protects from water jets from any direction, but is not impervious to large amounts of water. Please do not directly immerse in water. To ensure that the KS Diggit XL is water resistant, please remove all cable connections and tightly close the AUX/DC IN cap. Exposing the KS Diggit XL to liquids without doing so may result in permanent damage to the speaker. Do not expose the KS Diggit XL to water while charging. This is very dangerous as doing so may result in personal injury and permanent damage to the speaker or power source. IP66 rating is defined as the KS Diggit XL can withstand water spray (water-carrying capacity 100 L/min) for up to 3 minutes. We do not recommend leaving the KS Diggit XL outside at night in wet conditions or when its raining. Store in a dry place while not in use, this will prolong the speakers life. Box contents KitSound DIGGIT XL Micro USB charge cable User manual Stake Stake tube Multi-Pair Button Micro USB Charge Port Aux in Stake Functions MFB (Multi-Function Button) 1. 2. Volume+/Next Track 3. Volume-/Next Track 4. 5. 6. 7. 8. LED Light Indicator 9. Stake Tube (Image needed) 10. Stake (Image needed) Instructions for use Getting started Charging the battery:
Give the speaker a full charge before its first use:
1. Connect the supplied USB charging cable to the Micro USB Charging Port (5) and plug into power 2. The LED Indicator (8) will slowly flash red whilst charging which will take up to 4 hours 3. Once fully charged the LED Indicator (8) will turn off QA-MRK-FM-08-02 v1 Note: Allow up to 12 hours for the first charge. You can play your speaker whilst it is being charged, but this will affect the charging time. Battery protection mode If you havent used the speaker for 90 days, the speaker will switch to battery protection mode automatically. To cancel the battery protection mode, connect the DIGGIT XL to power as per Step 1 under Charging the battery To keep the rechargeable battery in good condition, please discharge and recharge speaker every 3 months, whether used during this time or not Note: For best sound quality when the battery is below 30%, it is best to charge the DIGGIT XL Pairing the DIGGIT XL to your device 1. Long press MFB (1) to turn the speaker on and it will automatically enter pairing mode and the LED Indicator (8) will slowly flash white 2. Turn your iOS, Android, or Windows devices Bluetooth ON and search for new devices 3. Select KS Diggit XL If asked for a passcode, enter 0000, and the device will pair 4. Once connected an audio tone will sound and the LED Indicator (8) will be solid white Re-pairing or pairing new devices 1. Turn Bluetooth connectivity off on any previously paired devices OR 2. Double tap the MFB (1) to re-enter pairing mode 3. Follow the Pairing the DIGGIT XL to your device instructions Note: If a previously paired device is not present within the Bluetooth connectivity range then the speaker will re-enter pairing mode. Playing music on your speaker Bluetooth When connected via Bluetooth, play music on your device and the sound will play through the speaker. Some devices may require you to select the audio output. Auxiliary 1. Plug the Aux cable into the speakers Aux-in Port (6) and your device using the supplied cable 2. The LED Indicator (8) will be solid white Once connected to the DIGGIT XL either wired or by Bluetooth, please follow the instructions on next page:
Function Volume+
Bluetooth mode Short press 2 Auxiliary mode Short press 2 QA-MRK-FM-08-02 v1 Volume Next Track Previous Track Play/Pause Track Turn Off/On Short press 3 Long press 2 Long press 3 Short press 1 Long press 1 Short press 3 N/A & use device N/A & use device N/A & use device Long press 1 Please note Your device will have an internal amplifier and if it is playing digital files like MP3s. It will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion. Bluetooth Multi-Pairing 1. Follow the normal instructions on Pairing the Diggit XL to your device to pair your device to a Diggit XL. This Diggit XL will act as the master speaker. This connection must be made before attempting to Multi-Pair more speakers and use the feature 2. Turn on any additional speakers you wish to use for Multi-Pairing by long pressing the MFB
(1). All the additional speakers will now automatically enter pairing mode 3. Short press the Multi-Pair Button (4) on the initial master speaker. The LED Indicator (8) on this speaker will now flash pink 4. Short press the Multi-Pair Button (4) on each additional speaker and their LED Indicators (8) will also flash pink 5. The Diggit XLs will now begin Multi-Pairing. The LED Indicator (8) on each additional speaker will turn solid white to show they are all connected properly. The master speakers LED Indicator
(8) will flash pink for a couple of minutes to ensure it finds every speaker 6. The audio will now play through every speaker, giving you an immersive sound experience As soon as all speakers have been found, the master speakers LED Indicator (8) will turn solid pink to show that all possible connections have been made. The solid pink notifies what speaker is now the master. Each additional speaker will remain solid white when connected. Note: Multi-Pair will not work when using the aux cable. The Diggit XL must be in Bluetooth mode. To break pairing 1. To remove a speaker from the Multi-Pair chain, short press Multi-Pair Button (4) on any of the additional speakers you want to disconnect Note: Once a Multi-Pair connection is made, the Diggit XLs will find each other automatically when turned on again. Note: We recommend that the below factory reset is performed on any Diggit XL that has been used as an additional speaker within a multi-pairing chain, if you intend to use the same speaker again individually or as a master speaker in a new multi-pairing chain. To factory reset a Diggit XL speaker QA-MRK-FM-08-02 v1 To factory reset any of the Diggit XLs and break its Bluetooth connection, long press the MFB (1) and Multi-Pair Button (4) together for 10 seconds. The master Diggit XL will then re-enter pairing mode and the LED indicator (8) will flash white. Using the Stake The Diggit XL Outdoor Bluetooth Speakers removable stake means that it can be used at all sorts of outdoor locations without muffling sound, such as the beach, picnics, BBQs, festivals, garden parties, camping, and more!
How to safely apply and use the removable stake 1. Pull the Stake (10) out of the Stake Tube (9) 2. Turn the Stake (10) 180 degrees and push back into the Stake tube (9) (see figure 1) 3. Push the assembled stake into the ground. Please ensure that you do this safely and carefully and ensure that the stake is only pushed in by hand. (see figure 2). DO NOT use any objects or the Diggit XL itself to hit it into the ground 4. Make sure the bottom of the speaker is a sufficient distance from the ground to allow easy and safe removal. DO NOT push the entire stake into the ground 5. Carefully place the Diggit XL onto the Stake Tube (9) (see figure 3) How to safely extract and store the removable stake 6. When you have finished using the Diggit XL, carefully remove the Speaker from the Stake Tube (9) 7. Grab the lower end of the Stake Tube (9) and the exposed part of the Stake (10) and carefully pull out of the ground. DO NOT wiggle the stake or apply undue pressure when removing to prevent damage to the product If the Stake Tube (9) or Stake (10) has dirt on it, clean with a damp cloth before returning the Stake (10) into the Stake Tube (9) for safe keeping 8. Note: Only apply the stake into ground suitable for use, such as soft grass, sand, or snow. QA-MRK-FM-08-02 v1 Specifications Bluetooth technology v4.0 Bluetooth connectivity distance Bluetooth Frequency Transmission power Frequency response Drivers Output RMS Battery Play time Charging time IP rating Working temperature Dimensions (mm) Weight Troubleshooting We hope you've now got all the information you need to get started, but if you're having problems with anything, please feel free to contact us at: support@kitsound.co.uk up to 30 m 2402 2480 MHz 6 dBm (conducted) 60 Hz 20 kHz 2 x 45 mm 2 x 15 W Li-ion up to 24 hours up to 4 hours IP66 40C ~ -10C H193 x W81 xD81 mm 614 g Hereby, Kondor Ltd declares that the radio equipment type, KSDIGXLnn is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents. FCC ID: 2ADFF- KSDIGXL This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device and ISM equipment, pursuant to part 15 of the FCC Rules respectively. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be QA-MRK-FM-08-02 v1 determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help IC: 23562 KSDIGXL This device complies contains licence-exempt transmitter/receiver that comply with Innovation Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution: Radio Frequency Exposure This device comply with applicable FCC and ISED radio frequency exposure requirement, must be installed with a separation distance between the user and/or bystander and the device greater than 20cm. Exposition aux radiofrquences : Cet quipement est conforme aux limites dexposition par rayonnements dfinies par lindustrie du Canada pour une utilisation dans un environnement non clos. Cet quipement doit tre utilis une distance minimale de 20 cm entre lmetteur de radiation et votre corps. Cet metteur ne doit pas tre situe au mme endroit quun autre metteur et ne doit pas tre connect une antenne diffrente. The use and operation of this product is beyond our control. Warranty of the KSDIGXLnn is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery. This may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We are sorry for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. BACKCOVER kitsound.co.uk QA-MRK-FM-08-02 v1 The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners. All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Products showing the Crossed Through wheelie bin symbol must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer may operate a take-back scheme when you are ready to purchase a replacement product, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling. Please recycle this packaging responsibly. JB. 6716_a/REG02/KSDIGXL/Made in China. KitSound is a trademark of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK QA-MRK-FM-08-02 v1