KitSound KS SLAM XL BLUETOOTH PARTY SPEAKER USER MANUAL Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk electric shock to persons Le symbole de l'clair flche dans un triangle quilatral, est destin alerter l'utilisateur de la prsence de tension dangereuse non isole dans le botier du produit qui peut tre d'une ampleur suffisante pour constituer un risque d'lectrocution. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Le point d'exclamation dans un triangle quilatral est destin alerter l'utilisateur de la prsence d'exploitation importante et d'instructions de maintenance (entretien) dans la documentation jointe l'appareil. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. WARNING: Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. WARNING: Do not attempt to repair or service the Slam XL to any extent as this may lead to injury Please read this manual carefully before use Box contents:
KS Slam XL Bluetooth Speaker UK, EU, US, Australian power leads 3.5 mm to 3.5 mm audio cable User manual Power cables You have three power cables in the box, you must use the correct lead for your region and not use any third party leads as this will invalidate your warranty as we cannot guarantee their safety. 1 2 3 4 5 6 7 8 Functions Increase volume/Next track 1. On/Off 2. Decrease volume/Previous track 3. 4. Chill mode 5. Party mode 6. Strobe lights On/Off 7. Colours 8. Bluetooth (BT) multi-pair 9. LED indicator 10. Strobe lights 11. RGB lights 12. Aux-in port 13. Mains power port 14. Handle 15. USB servicing port (Do not use) 14 10 9 11 12 13 Instructions for use No. Function Power Volume - /
Previous track Volume + / Next track /
Bluetooth Mode Long press (3s) to Power on. Auxiliary Mode Long press (3s) to Power on. Short Press lower volume. Short Press lower volume. Long press previous track. Short Press higher volume. Short Press higher volume. Long press next track. Chill Mode Short press to switch between options. Short press to switch between options. 1. Solid colours 2. Soft glow in/out single colours 3. Soft glow in/out all colours 4. Off 1. Solid colours 2. Soft glow in/out single colours 3. Soft glow in/out all colours 4. Off Party Mode Short press to switch between options. Short press to switch between options. 1. Casual 2. Party 1 3. Party 2 4. Intense Party 1. Casual 2. Party 1 3. Party 2 4. Intense Party Strobe Lights Short Press On/Off Only works in Casual and Party modes. Short Press On/Off Only works in Casual and Party modes. Colour Short press to switch between options. Short press to switch between options. 1 2 3 4 5 6 7 1. Purple 2. Blue 3. Green 4. Yellow 5. Red 1. Purple 2. Blue 3. Green 4. Yellow 5. Red 8 Multi Pair Short Press Start TWS pairing N/A Long Press 3 seconds Start pairing for device/start repairing for device LED lights indication Flash white quickly for new device pairing Flash white slowly for auto reconnection to last paired Pairing mode device Paired in Bluetooth mode and playing audio Solid white Paired in Bluetooth but not playing audio Solid white Aux-in mode TWS pairing Solid red Flash white slowly Solid white for slave speaker and flashing white quickly for Enter TWS mode master speaker TWS paired with device but not playing audio Solid white TWS paired with device and playing audio Solid white Pairing the speaker to your device Turn the Slam XL on by holding the On/Off button (1) for 3 second. The Slam XL will automatically enter pairing mode if a previously paired device is not detected. The Input indicator LED (9) will flash white whilst in pairing mode Turn your iOS, Android, or Windows devices Bluetooth ON and search for new devices. Select KS Slam XL. If asked for a passcode, enter 0000 Once paired, the speaker will play an audio tone and the Input indicator LED (9) will shine a solid white Re-pairing or pairing new devices 1. Turn Bluetooth off on any previously paired devices 2. Follow the Pairing the speaker to your device instructions OR 1. Start re-pairing by holding the BT multi pair button (8) for 3 seconds 2. Follow the Pairing the speaker to your device instructions Playing music on your speaker Bluetooth When connected via Bluetooth, play the music on your device and the sound will play through the speaker. Some devices may require you to select the audio output. When music is playing the Input indicator LED (9) will be solid white. Auxiliary 1. Plug a 3.5 mm to 3.5 mm auxiliary cable into the speakers Aux-in port (12) and your device 2. The Input indicator LED (9) will be solid red 3. Short press Decrease volume (2) to decrease volume 4. Short press Increase volume (3) to increase volume Note: Changing track will not be active during this mode TWS (True Wireless Stereo) for stereo sound*
1. With both Slam XL speakers turned on and in pairing mode (make sure your device isnt connected to either while trying to pair for TWS) 2. Short press Multi Pair button (8) on both speakers and the LED indicator (9) will slowly flash white on both speakers 3. The master speaker will automatically find the other speaker, the slave will become solid white and the master will then flash quickly 4. Once connected, the LED indicator (9) will become solid white on both speakers 5. Turn your iOS, Android, or Windows devices Bluetooth ON and search for new devices 6. Select KS Slam XL. If asked for a passcode, enter 0000, and the device will pair 7. Once connected, the LED indicator (9) will be a solid white if playing audio or slowly flashing white if not playing audio Note: To cancel the TWS on both, Short press Multi pair button (8) on both speakers and they will disconnect. The second speaker will re-enter pairing mode while the master will continue to be paired to your device.
*Second Slam XL sold separately Please note Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion. Chill mode Short press chill mode (4) to cycle through the below options. Use the colour button (7) to change the colour when you have selected solid single colour or soft glow in/out of single colour Solid single colour Soft glow in/out = all colours Soft glow in/out = single colour Off Party mode Short press party mode (5) to cycle through the below options. The RGB lights will randomly flash/change to the music in any of the party modes. Party mode 1 The strobe lights will burst flash every 3 minutes. Party mode 2 The strobe lights will burst flash every 2 minutes. Party mode 3 The strobe lights will burst flash every 1 minutes. Strobe lights The strobe lights can only be turned on in party mode; they will not work in chill mode Colour Short press colour (7) to cycle through the below colours. Changing the colour is only available in chill mode, in party mode the RGB lights will randomly flash/change to the music. Purple Blue Green Yellow Red Safety warning Save these instructions, this manual contains important safety and operating instruction. Warning:
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy. The Slam Xl has been designed so that the strobe lights only flash in synchronization to a maximum of 4 flashes per second and no longer than 30 seconds at this flash rate following guidance from UK guidelines If you find yourself or someone else effected by the strobe lights Cover one eye, turn away from the Slam Xl and leave the room Short press strobe lights (6) to turn off the strobe lights Closing both eyes or turning your eyes in another direction will not help Care for your Slam XL Please DONT:
Get the Slam XL wet Submerge the Slam XL Drop the Slam XL as this will invalidate your warranty Open up the Slam XL. There are no user serviceable parts inside Expose the Slam XL to extreme temperatures or rapid changes of hot to cold or vice versa Please DO:
Clean the Slam XL with a soft dry cloth and no detergents Specifications:
Works with Bluetooth Version Bluetooth range S/N Frequency response Drivers Output RMS Transmission frequency band Transmission power Dimensions (mm) Weight Bluetooth V5 up to 30 m 85 dB 50 Hz 18 kHz 2 x 133 mm 2 x 50 W @ 4 ohm 2.402-2.480G 2-4dbm H190 x W473 x D252 4.8 kg Troubleshooting We hope youve now got all the information you need to get started, but if youre having problems with anything, please feel free to contact us at: support@kitsound.co.uk Hereby, Kondor Ltd declares that the radio equipment type, KSSMXLBK Bluetooth Speaker, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://kondor.co.uk/product-documents FCC ID: 2ADFF-KSSMXLBK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-
- Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. IC: 23562 KSSMXLBK This device contains licence-exempt transmitter/receiver that comply with Innovation Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The use and operation of this speaker is beyond our control. Warranty of the KS SLAM XL is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners. All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Please recycle this packaging responsibly. Please refer to the enclosed manual for further information. JB. 6551 / Made in China. KitSound is a trademark of Kondor Limited, 2017 Christchurch, Dorset, BH23 4FL, UK