2 3 4 5 6 7 8 1 KitSound KS XDOCK Qi Qi CHARGING BLUETOOTH SPEAKER DOCK
(Qi logo) USER MANUAL Please read this manual carefully before use. Box contents:
KS XDock Qi AC/DC adaptor (UK & US plug attachments) 3.5 mm aux cable User manual Functions Top view 1. Play/pause/pair/select 2. Previous Track/Volume -/AutoScan -
3. Next Track/Volume +/AutoScan +
4. Alarm 1 5. Alarm 2 6. Standby/Mode 7. Light brightness 8. Sleep/Snooze Rear view 9. FM antenna 10. Aux-in port 11. DC IN input 12. On/Off switch Bottom view 13. Battery compartment Front view 14. Qi charging area 15. Clock face 12 11 10 9 13 14 15 Screen icons a. Alarm 1 b. Alarm 2 c. Bluetooth mode d. Qi charging device e. FM radio mode f. Aux mode g. Time display Note: To prevent the overheating of device or product, the KS XDOCKQI has built-in Foreign Object Detection (FOD). This is a safety mechanism that automatically interrupts power delivery if any foreign object that can absorb energy (such as a coin, paper clip, or other metallic/magnetic object) is detected. Installing the backup battery for clock and alarm settings In order to offer consistent clock settings and alarm functions, the unit uses a backup battery system. This means that in the event of a power failure, all the settings (clock, alarms and FM presets) of the unit will remain saved. Note: The XDock Qi will NOT power on with battery power alone, the batteries are for settings backup only. 1. Make sure the connection between the Mains plug and the XDock Qi is secure. This is important, because during battery replacement it is possible for all settings to be lost if clock and alarm have already been set 2. Locate and open the Battery compartment (13) on the bottom of the unit 3. Insert two AAA batteries*, following the correct polarity (+/) drawings inside the battery compartment. For longer battery life, alkaline batteries are recommended
*Batteries are not included Note: New and used batteries should not be mixed. Likewise, alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries should not be mixed and used together. LED light indication Bluetooth icon (c) - Flash white quickly for new device pairing Bluetooth icon (c) - Flash white slowly for auto reconnection Pairing mode to last paired device Paired in Bluetooth mode and playing audio Bluetooth icon (c) - Solid white Paired in Bluetooth but not playing audio Bluetooth icon (c) - Solid white Aux-in mode Radio mode Qi charging Alarm 1 Alarm 2 Aux icon (f) - Solid white Radio icon (e) - Solid white Qi device charging (d) - Solid white Qi device finished charging (d) - Off On - Solid white, Off No light On - Solid white, Off No light Note: To factory reset the XDock Qi:
1. Unplug the XDock Qi from power 2. Press and hold the Standby/Mode button (6) while plugging the power adaptor in DC IN input (11) 3. The XDock Qi will now factory reset Basic use Turning the XDock Qi on/off 1. Firstly, make sure the Mains plug is connected and the ON/OFF switch (12) on the rear of the unit is in the ON position 2. Now press (dont hold) Standby/Mode (6) 3. To put the XDock Qi in standby mode, whilst in Radio/Bluetooth/Aux mode, press and hold Standby/Mode (6) for 3 seconds Note: Pressing Standby/Mode (6) will cycle through the Aux (f)/Bluetooth (c) and Radio modes (e) Qi Charging To start Qi charging your device, simply place your device on the area shown on the base. This will work in any mode including standby. See page 10 for more information The Qi charging area allows your device to charge in both landscape and portrait orientation. Please make sure that the centre of your device aligns with the marking on the base. See below example image. How to avoid slow Qi charging You can charge your device on the Qi charging area with the case on, but devices with cases on will charge slower than those with no case. The thickness of the case will also affect how much slower the device charges compared to those without a case. How to prevent charge not functioning Note: To prevent the overheating of device or product, the KS XDock Qi has built-in Foreign Object Detection (FOD). This is a safety mechanism that automatically interrupts power delivery if any foreign object that can absorb energy (such as a coin, paper clip, or other metallic/magnetic object) is detected. If you use a metal plate with your case to magnetically hold it in your car, please remove it as FOD will stop the device from Qi charging. Note: Consult your devices product manual for your Qi coil charging location. XDock Qi behaviour when initiating or stopping Qi charging The XDock Qi can behave in several ways when you place/remove your device to initiate/stop Qi charging:
1. If your XDock Qi is playing the radio when you start Qi charging, or when you remove your device, the radio will continue to play. If you want to play music via Bluetooth, youll have to change mode. 2. When you place your device onto the XDock Qi, Bluetooth pairing is initiated and the phone will start to charge and pair to the XDock Qi. If you start playing music on your device the audio will be played through the XDock Qi. 3. When you remove your device from the XDock Qi while you are playing music via Bluetooth, it will continue to play. If you stop the music on your device the Bluetooth connection will turn off after 15 minutes. Setting the clock 1. With the XDock Qi in standby mode, long press Play/pause (1) and it will automatically enter 24H mode 2. Press Plus Icon (3) or Minus Icon (2) to increase or decrease the hours, then press Play/pause (1) to confirm 3. Press Plus Icon (3) or Minus Icon (2) to increase or decrease the minutes, then press Play/pause
(1) to confirm 4. The time will now be set Note: To make sure the time set is not lost during a power cut, please insert 2 AAA batteries (not included) into the battery compartment (13). Important note before setting alarms If you want to wake up to the radio, set the radio station you want first before setting the alarm. Go to radio mode, choose your station. Then follow the setting Alarm 1 & 2 instructions below. Setting Alarm 1 1. Long press Alarm 1 (4) to start the set up 2. Press Next (3) or Previous (2) to select between Buzzer or Radio to wake you up, followed by Alarm 1 (4) to confirm 3. Press Plus Icon (3) or Minus Icon (2) to change the hours, followed by Alarm 1 (4) to confirm 4. Press Plus Icon (3) or Minus Icon (2) to change the minutes, followed by Alarm 1 (4) to confirm 5. Press Plus Icon (3) or Minus Icon (2) to change the alarm volume, followed by Alarm 1 (4) to confirm 6. The alarm is now set Note: the Plus Icon (3) or Minus Icon (2) will become Next and Previous during the alarm setup in any mode. Setting Alarm 2 1. Long press Alarm 2 (5) to start the set up 2. Press Next (3) or Previous (2) to select between Buzzer or Radio to wake you up, followed by Alarm 2 (5) to confirm 3. Press Plus Icon (3) or Minus Icon (2) to change the hours, followed by Alarm 2 (5) to confirm 4. Press Plus Icon (3) or Minus Icon (2) to change the minutes, followed by Alarm 2 (5) to confirm 5. Press Plus Icon (3) or Minus Icon (2) to change the alarm volume, followed by Alarm 2 (5) to confirm 6. The alarm is now set Snooze Short press Sleep/snooze (8) during the alarm sounding to snooze for 9 minutes. Stop the alarm When the alarm is sounding, pressing the relating alarm button Alarm 1 (4) or Alarm 2 (5) will stop the alarm sounding. However, this will not switch off the alarm set. Cancel the set alarms With the XDock Qi in any mode, press Alarm 1 (4) or Alarm 2 (5) once. The Alarm 1 (4) or Alarm 2 (5) icons respectively will disappear from the screen. Adjusting the screen brightness With the XDock Qi in any mode, press Light brightness (7) to cycle through (Off, High brightness, Medium brightness and Low brightness). Sleep timer If you want the XDock Qi to switch off after a set time, follow the below instructions. This is best used when falling asleep to the radio. With the XDock Qi in any mode, press Sleep/snooze (8) to cycle through (15 minutes, 30 minutes, 45 minutes, 60 minutes and off). Playing music Pairing the XDock Qi via Bluetooth 1. Press the Standby/Mode button (6) to cycle through the input selection to Bluetooth mode
(c) 2. The XDock Qi will automatically enter pairing mode, indicated by the flashing Bluetooth icon
(c) 3. Turn your iOS, Android, or Windows devices Bluetooth ON and search for new devices 4. Select KS XDOCK QI. If asked for a passcode, enter 0000, and the device will pair 5. An audio tone will sound to confirm pairing and the Bluetooth icon (c) will stop flashing 6. Audio volume can be controlled using Volume + (3) and Volume (2) 7. Audio playback can be paused using the Play/pause button (1) and skipped using long press Next track (3) or Previous track (2) Re-pairing or pairing new devices 1. Turn Bluetooth connectivity off on any previously paired devices 2. Follow instructions 3 7 of Pairing the XDock Qi via Bluetooth section Note: If a previously paired device is not present within the wireless connectivity range then the speaker will re-enter pairing mode. Note: The XDock Qis internal amplifier will go to standby after 15 minutes of no music activity. Aux mode The aux input allows you to use most other smartphones/tablets/MP3 players etc. with the XDock Qi. To use the aux input:
1. Plug one end of an aux cable into the Aux-in port (10) 2. Plug the other end of the aux cable into your device 3. If the XDock Qi is in standby mode, press Standby/Mode (6) to cycle through the input selection to Aux mode 4. Once Aux mode is selected, music will then play through the XDock Qi 5. The volume can be adjusted on both your device and the XDock Qi Note: The Play/pause (1) and skip track (2 and 3) functions on the XDock Qi will not operate in Aux mode. Note: The XDock Qis internal amplifier will go to standby after 15 minutes of no music activity. FM radio To use the FM radio 1. If the XDock Qi is in standby mode, long press Standby/Mode (6) 2. Press Standby/Mode (6) to cycle through the input selection to FM radio mode, this will be displayed on the screen (15) 3. To automatically scan for the next station, long press AutoScan+ Icon (3) or AutoScan- Icon (2) until the numbers start scrolling for the next station Note: Manually tuning the XDock Qi is not available Saving preset stations 1. Tune into a station you want to save into a preset 2. Short press Play/pause (1) until the screen displays ch and a number between 1 and 10 3. To change the preset number, press AutoScan Icon (3) or AutoScan- Icon (2) 4. Short press Play/pause (1) to confirm the preset number 5. Repeat steps 1 4 to save up to 30 stations in total To recall a preset 1. Long press Play/pause (1) while in radio mode and the MEM icon will appear along with ch and a number between 1 and 10 2. To change the preset number, press Plus Icon (3) or Minus Icon (2) 3. Short press Play/pause (1) to confirm and listen to the station set to that preset number Please note Your device will have an internal amplifier and if it is playing digital files like MP3s, it will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion. Care for your XDock Qi Please DONT:
Get the XDock Qi wet Drop the XDock Qi as this will invalidate your warranty Open up the XDock Qi as there are no user serviceable parts inside Use any other AD/DC adaptor than the one supplied Expose the XDock Qi to extreme temperatures or rapid changes of hot to cold or vice versa Warning: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like Please DO:
Clean the XDock Qi with a soft dry cloth and no detergents Specifications:
Bluetooth technology Up to 10 m 2402 2408 MHz Class II <2.5 mW(4 dBm) 10 105 KHz 205 KHz Bluetooth connectivity range Transmission Frequency band Transmission Power Qi charging Wattage Qi charging operating frequency band FM frequency response S/N Frequency response Drivers Output RMS Number of alarms Power source Dimensions (mm) Weight Troubleshooting We hope youve now got all the information you need to get started, but if youre having problems with anything, please feel free to contact us at: support@kitsound.co.uk 87.5 108 MHz 55 dB 100 Hz 20 KHz 1 x 40 mm 5 W 2 DC 9 V, 2 A H171x W201 x D128 0.46 Kg 1) Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2) NOTE: This charging pad has been tested and found to comply with the limits for an ISM equipment, pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This charging pad generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 18 of FCC Rules Hereby, Kondor Ltd declares that the radio equipment type, XDOCK Qi CHARGING BLUETOOTH SPEAKER DOCK, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://kondor.co.uk/product-documents US Responsible Party Information Name: Mobileistic, LLC Address: 205 Marcus Boulevard, Hauppauge, New York 11788 Telephone: 631-531-9500 Email: support@mobileistic.com FCC ID: 2ADFF-KSXDOCKQI This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-
- Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. IC: 23562 KSXDOCKQI This device contains licence-exempt transmitter/receiver that comply with Innovation Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The use and operation of this speaker is beyond our control. Warranty of the KS XDock Qi is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery. This may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. Please recycle this packaging responsibly. Your product and batteries must be recycled or disposed of properly. Products showing the Crossed Through wheelie bin symbol must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer may operate a take-back scheme when you are ready to purchase a replacement product, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners. The Qi symbol is a trademark of the Wireless Power Consortium. Please recycle this packaging responsibly. Please refer to the enclosed manual for further information. (this is from the packaging copy???) JB. 6553_a/Made in China. KitSound is a trademark of Kondor Limited, 2017 Christchurch, Dorset, BH23 4FL, UK