FCC ID: 2A78RKMD-NS Switch Bluetooth Wireless Controller

Wireless Controller Instruction Manual KMD-NS-1144 1. This controller is suitable for games in the N-S/LitePC, Android system Console;

2. This controller supports wireless connection to the N-S/Lite Console and also supports wired connection to the 3. Functional buttons of the controller corresponds to the functional buttons of N-S_pro Controller. It supports TURBO, Six-Axis gyroscopeProgrammable function and Vibration function;

Functional buttons icon Features:

N-S base. Product instructions:

N-S/Lite Wireless connection mode mode;

1. In the N-SL main menu interface, click on 'Controller'Change grip/sequence,enter the Controller pairing 2. Press and hold the Y+HOME button for 4 seconds to enter the pairing state. The LED flashes frequently. The controller is automatically paired with the console. After the connection is successful, the LED been on;

3. When the connection is successful, you can press the HOME button, and the LED will flash slowly in the form of a marquee and automatically reconnect;

Note: If the host is too difficult to pair the Controllers, it may be that the console has too many Bluetooth devices connected, you need to manually clear the Bluetooth information.The steps are:System SettingControllers and SensorsDisconnect Controllers N-S Wired connection mode the system settings of the N-S console;

reconnect. PC Wired connection mode layout Android Wireless connection mode Before using the wired connection, make sure that the 'wired connection of the Pro Controller' is turned on in The Controller is connected to the Switch base through the USB cable, and can be used as a wired Controller, and the corresponding indicator of the Controller is flashed slowly;

Unplug the USB cable and the Controller will switch to wireless mode and the console will automatically 1. Wired connection, please use the USB cable to connect the gamepad and the computer. After connection, LED1 and LED4 of the gamepad flash slowly at the same time, successfully connected, the gamepad can be normally used 2. The controller defaults to Xinput mode on the PC side, and the keys are XBOX360 key layout, non-standard PC key 3. In XINPUT mode, hold down the HOME button for 3 seconds to convert to DINPUT mode A, press A+HOME button at the same time for 2 seconds to start the controller B, LED1 flash, enter the search mode C, turn on the bluetooth of the Mobile phone, enter the search mode, click the searched handle in the device to connect (the first connection name is a series of Numbers) D. After successful connection, LED1 always on, and the handle can work normally Note: Not all android-based games are compatible with controller. Please make sure the game supports controller before using Special function:

Adjustable vibration function Adjustment mode:

There are three vibration gears: strong, medium and weak (amplitude 75%, 55% and 35%). In the online state, you can press and hold R,L,ZR and ZL for vibration intensity adjustment at the same time for 2 seconds, at the same time to increase one step of intensity. The three levels can be converted in turn, with a total of three levels (75%, Note: The vibration intensity can be set to remember the previous setting. That is, the vibration intensity can be turned on 55%, 35%) divided into strong/medium/weak. after shutdown to remember the last set intensity TURBO Function continuous hair function;

1. The action button includes (A/B/X/Y/L/ZL/R/ZR) 8 buttons. All of them can set TURBO function manually;

2. Manual continuous hair setting: Press one or more action keys at will, then press TTURBOkey to turn on manual 3. Automatic continuous hair setting: Press the action key with the continuous hair function on again and press the TURBO key again to turn on the automatic continuous hair function;

4. Hold down any action key for the third time and press TURBO key to clear the continuous hair function of this key;

5. Press "-" and the D-PAD "under" at the same time to clear all the continuous hair functions;

TURBO speed Settings Press the D-PAD down of the handle, then press the T key of the handle, the handle vibrates once, indicating to increase one gear continuous speed successfully, a total of three levels, respectively 5/12/20 times per second, hold the key of the D-PAD down and the T key, the handle vibrates once, then down a level of success. 5 pulses per second: slow flashing of corresponding channel light (once per second) 12 pulses per second: The corresponding channel light flashes in a moderate manner (f 2 times per second) 20 pulses per second: flash of corresponding channel light (4 times per second) Programming Setting A. Programming single button steps:

programming single steps ;

1,Press "M1 or M2" + "-" for 2 seconds, the handle vibrates once, the LED4 flashes slowly, and enters the 2. At this time, the M1 or M2 key can map handles A, B, X, Y, L, R, ZL, ZR, L3, L4, up, down, left, right, one of 14 key values One. (only one key can be mapped to the M1/M2 key in the programming mode). 3. After entering the key value that needs to be mapped, press M1 or M2 again to confirm, the handle vibrates again, and the LED indicator returns to the channel indication state to complete the setting. Operation example:

For example, if you want to map the key value "A" to the M1 key, first press and hold the M1 key without releasing it, and then press "-" for 2 seconds, the handle will vibrate once, and then the LED4 Flashing slowly, the M1 key enters the mapping mode, then press theA key, then the M1 key, the handle vibrates once, and the key value of M1 is "A". To reset the back button function, please repeat the above operation. Note: After the product sleeps, shuts down, and restarts, the previously set programming keys remain unchanged. 1. Press and hold "M1 or M2" + "+" for 2 seconds, the handle vibrates once, and the LED4 flashes slowly, and then B.Programming multiple buttons steps:

enters the multiple mode. 2. At this time, the M1 or M2 key can map the handle A, B, X, Y, L, R, ZL, ZR, L3, L4, up, down, left, and right arrow keys 14 combination keys (In the multiple mode, up to 16 key combinations can be mapped to the back key). 3. After entering the key value that needs macro definition, press M1 or M2 again to confirm, the handle will vibrate again, and the LED indicator will restore the channel indication state to complete the setting. Operation example:

For example, if the fourth key valueschanged to ``A / B / X / Y'' are mapped to the M1 back key, please press the M1 key without releasing it, and then press the ``+'' key in 2 Within seconds, the handle will vibrate once, and the LED4 will flash slowly. At this time, use the M1 key to enter the multiple mode, then press the fourth key values of A, B, X, Y, then press the M1 key, the handle will vibrate once, and then press the M1 key to change to "A, B, X, Y ". 4. To reset the back key function, repeat the above operation. Note: After the product sleeps, shuts down, and restarts, the previously set programming keys remain unchanged To clear the key value of the return key, you can press the "T" + "-" keys at the same time for 3 seconds, and the handle vibrates once to clear the key valuesof M1 and M2 Controller charging / sleep / wake / shutdown function:

Controller charging function:

a. When the power is low, the LED indicator flashes quickly;

b. When charging, the LED indicator flashes slowly;

c. When the battery is fully charged at work, the LED indicator light is on;

d. When the battery is fully charged after shutdown, the LED indicator is off;

Controller sleep/wake/shutdown function:

a. The controller automatically shuts down when there is no button operation within 5 minutes or the console b. In the power on state, press and hold the HOME button for 5 seconds, the product is turned off, and all the LED screen is turned off ;

indicators are off;

Product Specifications Input voltage / current: DC5V/500mA Normal operating voltage / current: DC3.7V/20mA Maximum working current: 300mA Continuous use time: 8H Charging time: About 3 hours Transmission distance: 10M battery capacity: 600mAh Precautions:

product;

warranty service;

1. Please do not store the product in a humid or hot place;

2. Do not knock, beat, puncture or attempt to disassemble the product to avoid unnecessary damage to the 3. Non-professionals should not disassemble this product, otherwise it will not be included in the after-sales 4. If the product is not used for a long time, or other illegal operation causes abnormal work, you can reset the product. The reset button is in the back hole of the product, and can be operated with slender sharp objects. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Product List:

1. game controller;

2. copy of the instruction;

3. charging cable;

KMD-NS-1144 Label and Label location Product Name: Switch Bluetooth Wireless Controller Model: KMD-NS-1144 FCC ID: 2A78RKMD-NS

Kool Brands, LLC 1450 Vassar Street, RENO, NV 89502, USA Date: 2022.07.24 FCC ID Number: 2A78RKMD-NS Dear Sir/Madam, We, Shenzhen Shikeshu Photoelectric Co., Ltd., hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model numbers are the same. All model numbers are same electrically identical. Only model number is different for these models:

Product Name:

Model Numbers:

Yours Sincerely, Switch Bluetooth Wireless Controller KMD-NS-1144, KMD-NS-1151 Name/Title Huang Erquan /manager Company:

Kool Brands, LLC 1450 Vassar Street, RENO, NV 89502, USA

(138) 288-8715 0

404580808@qq.com Address:

Phone:

Fax:

E-Mail:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-7-24>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2A78RKMD-NS Model name KMD-NS-1144 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Address:

Phone:

Fax:

E-Mail:

Name/Title Huang Erquan /manager Company:

Kool Brands, LLC 1450 Vassar Street, RENO, NV 89502, USA

(138) 288-8715 0

404580808@qq.com

Kool Brands, LLC. 1450 Vassar Street, RENO, NV 89502, USA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2022.07.24 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A78RKMD-NS including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Huang Erquan /manager Kool Brands, LLC 1450 Vassar Street, RENO, NV 89502, USA

(138) 288-8715 0

404580808@qq.com