FCC ID: 2ARPVRB-SGA-037 SEGA Genesis 8-button Arcade Pad - Wireless 2.4ghz

NA LAYOUT DIAGRAM X Y Z R L D-Pad START HOME SELECT 8-Button Arcade Pad 2.4 GHz Wireless V2 I N ST R U C T I O N M A N UA L M A N UA L D E I N ST R U C C I O N E S G U I D E DU T I L I SAT I O N

@retrobitgaming For more information, please visit www.retro-bit.com Retro-Bit is a registered trademark of Kool Brands, LLC. SEGA is registered in the U.S. Patent and Trademark Office. SEGA, the SEGA logo and GENESIS are either registered trademarks or trademarks of SEGA Holdings Co., Ltd. or its affiliates. Mac is a registered trademark of Apple Inc. USB is a registered trademark of Universal Serial Bus Implementers Forum, Inc. All other mentioned trademarks are either trademarks or registered trademarks of their respective owners. This product is licensed by SEGA of America, Inc. 2012 Kool Brands, LLC. SEGA Home Select Start A B C Includes controller, Micro USB Cable for charging, Original Port & USB Receivers, Deluxe storage case and instruction manual. DEFAULT BUTTON MAPPING Controller SEGA Genesis D-Pad D-Pad SEGA Genesis Mini I & II D-Pad A B C X Y Z L R A B C X Y Z

Select Start Home Connection Mode Start

V2 Genesis Receiver A B C X Y Z

Menu Start

Windows PC D-Input Windows PC X-Input Switch NSO SEGA Mode Classics Mode D-Pad 2 3 5 1 4 6 7 8 9 10

Left Analog 1 2 Z-

3 4 Z+

5 6 7 8

D-Pad D-Pad D-Pad A B ZR X Y ZL L R Y B A L X R ZL ZR Y B A L R X ZL ZR Minus -

Minus -

Plus +

Home Plus +

Home Minus -

Plus +

Home V2 USB Receiver Macro Input Mode Description Start + Select + R Clear Pairings Start + A Start + B Start + C Start + Left Start + Right Start + Up Start + Down NSO SEGA Mode Input Switch Classics Mode Left Analog Right Analog Dpad AB / XY Flip Removes all pairings from the controller. If you are experiencing battery drain issues, use this mode when leaving the controller idle. This will change the button mapping (see mapping chart). USB Receiver only. This will change the input mode on the controller and the LED will change color as well. This will change the button mapping (see mapping chart). USB Receiver only. Changes the DPad to act as the left analog stick (may not function in certain programs). Changes the DPad to act as the right analog stick (may not function in certain programs). Change the DPad to act as a DPad. Flips the A and B buttons and the X and Y buttons. E N I N ST R U C T I O N M A N UA L FEATURES Includes SEGA Genesis and USB wireless receivers Retains the familiar grip and sleek design Additional Home, Select, and shoulder buttons Includes 3.3ft / 1m USB-C charge cable Rechargeable 500mAh Li-ion battery Compatible with SEGA Genesis/Mega Drive consoles via Genesis receiver Compatible with PC, Mac, and other USB-enabled devices via USB receiver Up to 30ft / 10m gaming range PAIRING Connect the appropriate receiver into the consoles controller port. Once connected, the LED on the receiver will blink to indicate it is in search mode. Press Start on the controller. The LED on the controller will blink as well. Press and hold the Sync button on the receiver. Release the Sync button once both the receiver and controllers LED remain solid. If you encounter an issue while pairing, you can reset the controller in one of two ways:

Press and Hold Start + Select + R for 4 seconds Inserting a thin metal wire (an unbent paperclip for example) into the small hole on the back of the controller. Gently press and hold until the LED stops glowing. Then restart the pairing process. CHARGING When the controllers battery is low, plug the USB-C charge cable into the controller and the USB end into a powered charger or available port on a console. It is compatible with fast-charging plugs. The LED will remain lit when fully charged. SEGA GENESIS The controllers LED will be red to indicate it is in 6-Button Mode and blue if it is in 3-Button mode. To switch between the two modes, press and hold Start + B until it changes color. SEGA GENESIS MINI If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue. SEGA SATURN (REQUIRES V2 SATURN RECEIVER) If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue. SWITCH If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the Switch if it is blue. To set the DPad to Left Analog mode, press and hold Left + Start for 3 seconds To set the DPad to Right Analog mode, press and hold Right + Start for 3 seconds To set the DPad to back to normal, press and hold Up + Start for 3 seconds To flip the face buttons A/B & X/Y, press and hold Down + Start for 3 seconds PC / ANDROID The controllers LED indicates the input mode it is in. To switch between the modes, press and hold Start + B until it changes color. Red indicates it is in D-Input mode. Blue indicates it is in X-Input mode. MAC If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue. SUPPORT To stay up to date with the latest news, manuals, and firmware updates, visit www.retro-bit.com/support. FCC WARNING RF exposure statement This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. E S M A N UA L D E I N ST R U C C I O N E S F R G U I D E DU T I L I SAT I O N CARACTERSTICAS Incluye receptores inalmbricos SEGA Genesis y USB Mantiene el agarre familiar y el diseo elegante Botones adicionales de inicio, seleccin y hombro Incluye un cable de carga USB-C de 1 metro Batera recargable de iones de litio de 500mAh Compatible con las consolas SEGA Genesis/Mega Drive a travs del receptor Genesis Compatible con PC, Mac y otros dispositivos con USB a travs del receptor USB Alcance de juego de hasta 30 pies / 10m EMPAREJAMIENTO Conecta el conector-receptor apropiado en el puerto del mando de la consola. Una vez conectado, el LED en el conector-receptor parpadear para indicar que est en modo bsqueda. Pulsa START en el mando. El LED del mando tambin parpadear. Mantn pulsado el botn de sincronizacin en el conector-receptor. Suelta el botn de sincronizacin cuando ambos LED, el del mando y el del conector-

receptor, se queden permanentemente encendidos. rojo. El mando no funcionar en la consola si est de color azul. SEGA SATURN (REQUIERE EL RECEPTOR V2 SATURN) Si el LED del mando est de color azul, mantn pulsados Start + B hasta que cambie a rojo. El mando no funcionar en la consola si est de color azul. SWITCH Si el LED del mando est de color azul, mantn pulsados Start + B hasta que cambie a rojo. El mando no funcionar en la Swicth si est de color azul. Para pasar de la cruceta a la Izquierda en modo analgico, mantn pulsados Izquierda +

Start durante 3 segundos. Para pasar de la cruceta a la Derecha en modo analgico, mantn pulsados Derecha +

Start durante 3 segundos. Para pasar de la cruceta al modo normal, mantn pulsados Arriba + Start durante 3 segundos. Para cambiar los botones frontales A/B y X/Y, mantn pulsados Abajo + Start durante 3 segundos. CARACTRISTIQUES Comprend des rcepteurs sans fil SEGA Genesis et USB. Conserve la poigne familire et le design pur Boutons supplmentaires Home, Select et paule Comprend un cble de charge USB-C de 1 m / 3,3ft. Batterie Li-ion rechargeable de 500 mAh. Compatible avec les consoles SEGA Genesis/Mega Drive via le rcepteur Genesis. Compatible avec les PC, Mac et autres priphriques USB via le rcepteur USB. Porte de jeu jusqu 10 m (30ft) APPAIRAGE Branchez le rcepteur appropri dans le port manette de la console. Une fois branch, le voyant LED du rcepteur clignotera. Ce clignotement signifie que le rcepteur est mode recherche. Appuyez sur Start sur la manette. Le voyant LED de la manette clignotera galement. Maintenez le bouton Sync du rcepteur. Relchez le bouton Sync une fois que les voyants LED du rcepteur et de la manette ne clignoteront plus. Si encuentras cualquier incidencia cuando los emparejes, puedes reiniciar el mando de una de estas dos maneras:

Mantn pulsados Start + Select + R durante 4 segundos. Insertando un alambre de metal fino (por ejemplo, un clip enderezado) en el agujero pequeo que est en la parte trasera del mando. Manteniendo pulsado suavemente hasta que el LED deje de estar iluminado. Entonces reinicia el procedimiento de emparejamiento. CARGA Cuando la batera del mando est baja, conecta el cable de carga USB-C al mando y el extremo USB a un cargador con alimentacin o a un puerto disponible en una consola. Es compatible con enchufes de carga rpida. El LED permanecer encendido cuando est completamente cargado. SEGA GENESIS El LED del mando aparecer en rojo para indicar que est en modo para seis botones, y en azul si est en modo para tres botones. Para cambiar entre los dos modos, mantn pulsados Start + B hasta que cambie de color. SEGA GENESIS MINI Si el LED del mando est de color azul, mantn pulsados Start + B hasta que cambie a PC / ANDROID El LED del mando indica el modo de entrada en el que est. Para cambiar entre los diferentes modos, mantn pulsados Start + B hasta que cambie de color. El color rojo indica que est en modo de entrada D. El color azul indica que est en modo de entrada X. MAC Si el LED del mando est de color azul, mantn pulsados Start + B hasta que cambie a rojo. El mando no funcionar en la consola si est de color azul. ATENCIN AL CLIENTE Para estar al da de las ltimas noticias, manuales y actualizaciones de firmware, visita www.retro-bit.com/support. Si vous rencontrez des difficults lors de l'appairage, il existe deux manires de rinitialiser la manette :

Maintenez Start + Select + R pendant 4 secondes Insrez un fin fil mtallique (par exemple un trombone dpli) dans le petit orifice se trouvant l'arrire de la manette. Appuyez dlicatement jusqu' ce que le voyant LED s'teigne. Vous pourrez ensuite redmarrer le processus d'appairage. CHARGEMENT Lorsque la batterie de la manette est faible, branchez le cble de charge USB-C dans la manette et lextrmit USB dans un chargeur aliment ou un port disponible sur une console. Il est compatible avec les prises de charge rapide. Le voyant reste allum lorsque la batterie est compltement charge. SEGA GENESIS Le voyant LED est rouge lorsque la manette est en mode six boutons, et bleu en mode trois boutons. Pour basculer entre les deux modes, maintenez Start + B jusqu' ce que la couleur du voyant change. SEGA GENESIS MINI Si le voyant LED de la manette est bleu, maintenez Start + B jusqu' ce qu'il devienne rouge. La manette ne peut pas tre utilise avec la console lorsque le voyant est bleu. SEGA SATURN (NCESSITE UN RCEPTEUR SATURN V2) Si le voyant LED de la manette est bleu, maintenez Start + B jusqu' ce qu'il devienne rouge. La manette ne peut pas tre utilise avec la console lorsque le voyant est bleu. SWITCH Si le voyant LED de la manette est bleu, maintenez Start + B jusqu' ce qu'il devienne rouge. La manette ne peut pas tre utilise avec la Nintendo Switch lorsque le voyant est bleu. Pour configurer la croix directionnelle en mode analogue gauche, maintenez Gauche +

Start pendant 3 secondes. Pour configurer la croix directionnelle en mode analogue droit, maintenez Droite + Start pendant 3 secondes. Pour configurer la croix directionnelle en mode normal, maintenez Haut + Start pendant 3 secondes. Pour inverser les boutons avant A/B & X/Y, maintenez Bas + Start pendant 3 secondes. PC / ANDROID Le voyant LED de la manette indique le mode dans lequel elle se trouve. Pour basculer entre les modes, maintenez Start + B jusqu' ce que la couleur du voyant change. Rouge indique que la manette est en mode D-Input. Bleu indique que la manette est en mode X-Input. MAC Si le voyant LED de la manette est bleu, maintenez Start + B jusqu' ce qu'il devienne rouge. La manette ne peut pas tre utilise avec la console lorsque le voyant est bleu. ASSISTANCE Pour vous tenir au courant des dernires nouveauts, des manuels, et des mises jour logicielles, rendez-vous sur www.retro-bit.com/support.

Reference No.: WTX22X11236927W001 Page 1 of 11 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2ARPVRB-SGA-037 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Kool Brands, LLC. 1B 70, Reno, Nevada 89504, United States Date: 2023-02-03 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing SUBJECT: FCC Application for FCC ID: 2ARPVRB-SGA-037 To Whom It May Concern:

Kool Brands, LLC. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

Signatory

[RON PANG, VP]

Kool Brands, LLC. Date: 2023-02-03 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing SUBJECT: FCC Application for FCC ID: 2ARPVRB-SGA-037 To Whom It May Concern:

Kool Brands, LLC. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment.

<_~Sigesrety, Signatory IRON PANG, VP]

Kool Brands, LLC. P.O. Box 41270, Reno, Nevada 89504, United States Date: 2023-02-15 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (7) Filing SUBJECT: FCC Application for Grantee Code: 2ARPV Kool Brands, LLC. certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0027988344 Name: Kool Brands, LLC. Address: P.O. Box 41270, Reno, Nevada 89504, United States Contact Person: RON PANG Tel.: 909-839-6091 Email: alexi@innexinc.com Sincerely, Signatory

[RON PANG, VP]

Kool Brands, LLC. _ P.O. Box 41270, Reno) Nevada 89504, United States--- ------- -- ---- -- --- ----------------------- ------------- ---

Date: 1/12/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ARPVRB-SGA-037 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. IZI Block Diagram IZI Operational Description IZI Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SOR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 4 7 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s );

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or D For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,

RONPAN

Kool Brands, LLC. P.O. Box 41270, Reno, Nevada 89504, United States Federal Com:mW1ications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 1/12/2023 SUBJECT: FCC Application for FCC ID: 2ARPVRB-SGA-037 To Whom It May Concern:

T, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch .cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User's Manual or as a separate sheet. The info must contain the name, address. and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards,

Kool Brands, LLC. P.O. Box 41270, Reno, N evada 89504, United States

(FCC ID 2.ARPVRB-SGA-037) POWER OF ATTORN EY DATE: 1/12/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. We, Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Kool Brands, LLC. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Kool Brands, LLC.

(RON PA G)

(VP)