FCC ID: 2ARPV-X5811 Wireless Controller for Xbox 360

Wireless 2.4 GHz Controller Wireless Controller for Xbox 360 USB Menu LB/LT Button Left Analog/L3 D-Pad HOME Button RX Start RB/RT Button Y Button B Button A Button X Button Right Analog/R3 Product application This product belongs to XBOX ONE 2.4G controller, used for XBOX ONE console, working frequency in 2.4GHZ, remote wireless remote control, easy operation, can be applied to racing, fighting, competition and other kinds of game control, so that you can experience the immersive feeling in the XBOX ONE console game process. FEATURES The "Menu", "View" and "Share" buttons on the handle can be quickly and easily navigated. This wireless controller is used on the Xbox one console, and is compatible with the PC console win10 system Sensitive joystick and enhanced D-pad for better accuracy Rechargeable 600mAh Li-ion battery The handle can be wired to the host/computer, or can be wirelessly connected to the built-in receiver for use on the host/computer Built-in dual motor, 256-level precision 3D rocker Sensitive button response, easy to control Up to 30ft / 10m gaming range PAIRING Connect the appropriate receiver into the consoles controller port. Once connected, the LED on the receiver will blink to indicate it is in search mode. Press Start on the controller. The LED on the controller will blink as well. Press and hold the Sync button on the receiver. Release the Sync button once both the receiver and controllers LED remain solid. If you encounter an issue while pairing, you can reset the controller in one of two ways:

Press and Hold Start + R for 4 seconds Inserting a thin metal wire (an unbent paperclip for example) into the small hole on the back of the controller. Gently press and hold until the LED stops glowing. Then restart the pairing process. CHARGING When the controllers battery is low, plug the USB-C charge cable into the controller and the USB end into a powered charger or available port on a console. It is compatible with fast-charging plugs. The LED will remain lit when fully charged. FCC WARNING RF exposure statement This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Reference No.: WTX23X10221537W001 Page 1 of 11 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2ARPV-X5811 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Kool Brands, LLC. Date: 2023-11-29 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) SUBJECT: FCC Application for FCC ID: 2ARPV-X5 To Whom It May Concern:

Kool Brands, LLC. certifies that the equipment for prohibited from receiving an equipment authorizati Sincerely, Signatory

[RON PANG, VP]

Filing 811 hich authorization is sought is not covered equipment In pursuant to section 2.903 of the FCC rules.

Kool Brands, LLC. Date: 2023-11-29 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (5) (ii) SUBJECT: FCC Application for FCC ID: 2ARPV-X5!

To Whom It May Concern:

Kool Brands, LLC. certifies that, as of the date of tht Filing B11 e filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Signatory

[RON PANG, VP]

Kool Brands, LLC. Date: 2023-11-29 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2ARPV-X5811 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rule: $ Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram | 1 Tune-Up Information Operational Description 0 Security Information Kl Schematics 0 Software Defined Radio (SDR) Information Ol Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos 0 __ Test Setup Photos O Internal Photos O User Manual OO For 45 days, pursuant to Public Notice DA 04-1705. or O For 180 days pursuant to KDB 726920 DO1. The applicant understands that pursuant to Seetn 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Signatory

[RON PANG, VP]

Kool Brands, LLC. 1450 Vassar Street, Reno, Nevada 89502, United States Date: 2023-11-29 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2ARPV-X5811 POWER OF ATTORNEY To Whom It May Concern We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commissionjon our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Kool Brands, LLC. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section Signatory

[RON PANG, VP]

Kool Brands, LLC. Date: 2023-10-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (7) Filing Grantee Code: 2ARPV Applicant FRN: 0027988344 Kool Brands, LLC. certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Kool Brands, LLC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Designated U.S. Agent Information:

Name: Kool Brands, LLC. U.S. Agent FRN: 0027988344 Address: 1450 Vassar Street, Reno, Nevada 89502, United States Contact Person: RON PANG Tel.: 909-839-6091 Email: alexl@innexinc.com Si Signatory

[RON PANG, VP]

Rev 1/26/2023