EnterNet 300 Setup Complete Screen 11. EnterNet 300 icon will be added on your desktop after rebooting the PC. 12. Open the Control Panel and double -click Network. When you see <The following network components are installed> under tap of <Configuration>, you should check
<Network TeleSystems P.P.P.o.E Adapter (NTSP3)/ TCP/IP -> TeleSystems P.P.P.o.E Adapter(NTSP3)> is added. PPPoE Configuration added to Control Panel 3-2. Connecting to Internet Connecting with EnterNet 300 1. Run EnterNet 300 by double -click on the <EnterNet 300> icon when a line is 21 connected via AcessRunner. 2. Double -click on the <Create New Profile> icon when <Profiles - EnterNet 300>
screen appears. 3. Type a name in the box of <Connection Name> and click Next . 4. Enter the user name and the password for this ADSL connection in the <User Name and Password> screen. Click Next . 22 5. You can see the <Server Address> window for the entering server data of PPPoE. l If Es -Link KCU2000 is already connected to the phone, pppsrv were entered to the server directory of <Server Address> automatically. Duble -click pppoe folder from <Service>, and then pppoe will be added to Services. Click Next. l If ES-LINK KCU2000 is not connected to the phone, enter pppoe to the
<Server> and <Services> each from <Server Address>. Click Next. 6. Click Finish and close this screen. 7. Find a connection profile, <USB>icon, from the <Profiles -EnterNet 300> screen. Double-click the icon. 23 8. Click Connect. 9. You can access internet by using web browser. 3-3. PPPoA Protocol Installing and Connecting in Windows 98(98SE) 24 1. Double-click Dial-Up Networking icon on <My Computer>
2. Double-click on Make New Connection icon. 3. Type a name for the computer you are dialing. Select a device as Conexant AccessRunner USB ADSL WAN Adapterand click Next . 25 4. Type the phone number and click Next . 5. Click Finis h. 6. Now, new icon is added. Select this icon and click on right button of mouse. Select Properties. 26 7. Select Server Types tap and check TCP/IP only. Click on the TCP/IP Settings button. 27 8. Check <Server assigned IP address>,<Server assigned name server addresses> and
<Use default gateway on remote network>. Click OK. 9. Double- click adsl icon. 10. Fill out the User name and Password box and click Connect. Phone number is automatically assigned.
(Note: If you change the phone number, you can not connect internet.) 28 User Identification Installing and Connecting in Windows 2000 1. Double-click Network and Dial-up connections on the control panel. 29 2. Double-click on Make New Connection icon. 3. Network Connection Wizard is started. To continue click Next 30 4. Select <Dial-up to private network> and click Next 5. Type the phone number and click Next 6. Choose one of For all users and Only for my self. Click Next 31 7. Type the name you want to use for this connection and click Finish 8. Now, new icon is added. Select this icon and click on right button of mouse. Select Properties 32 9. Select Server Types tap and check <TCP/IP> only. Click on the TCP/IP Settings button. 10. Check <Server assigned IP address>,<Server assigned name server addresses>
and <Use default gateway on remote network>. Click OK. 11. Double-click ADSLicon 33 12. Dial-up connection Networking has been finished now. 4. Remove Modem Driver 34 Note : Before you setup a modem or modem driver, you must remove an existing driver completely. Otherwise, it will not work properly. Removing Modem Windows 98SE 1. Process <Settings-> Control Panel-> Add/Remove Programs>. 35 2. Select < Conexant AccessRunner USB ADSL LAN Adapter> in the tap of
<Install/Unintall>. Click on Add/Remove button. 3. Click Yes 4. Click OK 5. Click OK 36 6. This Dialogue box appears to show the driver uninstalled. Windows 2000 37 1. Process < Settings -> Control Panel -> Add/Remove Programs>
2. Select < Conexant AccessRunner USB ADSL LAN Adapter> in the tap of
<Change or Remove Programs>. Click on Change/Remove button. 3. To continue, click Yes 4. Click OK 5. Click OK 38 6. Click OK
. 7. This Dialogue box appears to show the driver uninstalled. FCC NOTICE NOTE: This equipment has been tested and found tocomply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are signed to provide reasonable protection against harmful interference in a residential instal-lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
39
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equip-ment. Such modifications could void the user's authority to operate the equipment. Product Warranty 1. Express Warranty KOTT warrants to the original purchaser of the Product that, for the one year period commencing on the date the Product was purchased (the warranty Period), the Product will be substantially free from defects in materials and workmanship under normal used and conditions. 2. Voiding of Warranty The express warranty set forth above shall not apply to failure of the Product if the Product has been subjected to:
40
-Physical abuse, misuse, improper installation , abnormal use, power failure or surge, or use not consistent with the operating instructions provided by KOTT
-Unusual physical or electrical stress, unsuitable operation or physical conditions negligence or accidents
-Modification or repair by any party in any manner other than as approved by KOTT in writing
-All those cases, purchaser should pay the repair and components fee. Product :
Model :
Serial No :
Name :
Phone :
Warranty period :
Purchasing date :
Korea One Telecommunication Technology, Inc Tel: 82-2-553-3437 Fax: 82-2-553-3438 Suite 305, Daeha B/D 680 YeokSam-Dong, KangNam-Ku, Seoul, KOREA 41