FRONT HOSS BT539i V2 BACK changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Bluetooth Discovery Mode To enter Bluetooth discovery mode, from an off state, depress and hold the center button until light flashes red and blue. red & blue (flashing) This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Select Koss BT539i on transmitting Wired Listening device to pair Bluetooth Settings Available Devices oss BT539i AUDIO OUT AUDIO IN Z\ WARNING Please read these safety warnings carefully to ensure your personal safety and prevent property damage.
- Do not leave your devices in close proximity to open flames or extreme sources of heat.
- Do not expose your devices to liquid or extreme humidity.
- Do not drop, disassemble, microwave, incinerate or paint your devices.
- Do not expose your devices to extreme high or low temperatures.
- Clean your devices with a clean, dry cloth.
- Do not leave your devices in direct sunlight for an extended period of time.
- Do not dispose of your devices in a fire. The battery could explode causing injury or death.
- Do not attempt to clean your devices while they are being charged.
- Only charge your devices with the components supplied with the devices.
- Do not attempt to disable the devices, chargers or cables or force open the built-in battery.
- Do not charge your devices in damp areas or in extreme high or low temperatures.
- Do not leave or store the devices or any of their accessories near or over your automobiles airbags, because serious injury may result when an airbag deploys. Charging Red (solid) _ Charging Blue (solid) _ Fully Charged Vol Up Previous Track Vol Down KOSS stereophones Koss Corporation * 4129 N. Port Washington Ave. Milwaukee, WI 53212 / USA + 1-800-USA-KOSS (1-800-872-5677) Koss-UK Ltd., Registered Office Address One New Change, London, EC4M 9AF / UK For warranty information visit www.koss.com. 1-YEAR LIMITED WARRANTY KOSS, KOSS and Design, THE SOUND OF KOSS, and HEARING IS BELIEVING are Registered in U.S. Patent and Trademark Office and are trademarks of Koss Next Track Play / Pause /
Power On / Power Off /
Answer Call / Hang Up Call /
Pairing Mode Bluetooth Headset Model: Koss BT539i V2 Input: 5V ===, 90mA Battery Capacity: 240mAh, 0.888Wh FCC ID: L76-BTS391V2 Ic: 10021A-BT5391V2 S/N: BTOO0002A Koss Corporation Made in China Lithium ion Battery:
Model: 502030, 3.7V, 240mAh DONGGUAN GOLDEN CEL BATTERY CO., LTD No.11, Yinhu Industrial Park, JiaoYiTang Management Zone, TangXia, 523723 DongGuan, GuangDong, PEOPLE'S REPUBLIC OF CHINA Corporation in other countries. Product features and specifications are subject to change without notice.Product may vary from images shown. CE Warning Listen at moderate volumes to avoid hearing damage. AX This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Scale = 1:1 Bluetooth Support Standard: IEEE 802.15.1 Frequency Range: 2402-2480MHz Max.RF Output Power: | -1.12dBm (ERP):
Type of Modulation: GFSK, 1/4 DQPSK, 8DPSK Data Rate: 1Mbps, 2Mbps, 3Mbps Quantity of Channels | 79
= Dieline
= Fold Lines Light Language Blue (flashing) Paired ~
Blue & Red (flashing) _ Bluetooth Discovery Mode ~
Blue (solid) Charger Connected, Fully Charged Red (solid) Charger Connected, Charging Red (flashing) _ Low Battery Microphone FCC RF Exposure Warning CAUTION The device has been evaluated to meet general RF exposure requirement. RISK OF Se ae eras REPLACED The device can be used in portable exposure condition without restriction. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS ISED RF Exposure Warning This radio transmitter (ISED certification number: 10021A-BT5391V2) has been approved by Industry Canada to operate with fixed integrated PCB antenna, the device has been evaluated to meet general RF exposure requirement. Ce transmetteur radio (ISED certification numro: 10021A-BT539IV2) a t approuv par Industrie Canada pour fonctionner avec une antenne PCB intgre fixe, l'appareil a t valu pour rpondre aux exigences gnrales dexposition aux RF. The product shall only be connected to a USB interface of version USB2.0 or higher, and that the connection to a power USB is allowed. This product can be used across EU member states Do not use other unauthorized chargers power supply for charging. Do not use the product in environment below -10 C or above 45 C for charging.