Please do not plug in or power on any of your STRIVA devices until prompted to do so. To activate and customize your STRIVA PROs, go to:
They are charged and ready for activation. www.mykoss.com Allow Java if prompted If you dont have Java, install it rst Create an Account or Login User Name Password I forgot my password Log In Create a MyKOSS account Dear UserName, Thank you for creating an account at myKoss.com. Please follow the link below to activate your new account. http://10.102.5.24:8080/activate.a spx?action=activate&user=237&a ct=B738BA497307611EDD2A4B4 3374C3E686F0A1F84 Check your email and click on the MyKOSS link Widgets
+ ADD Welcome There are no channels in this account. To add a new channel, click the +ADD button above. Create Channel 1. Select MUSIC 2. In the Channels Title Bar click + ADD Add Hotspot Add STRIVA Device Click on Lets get started Create a channel Customize channel Widgets Widgets
+ ADD
+ ADD Welcome Welcome There are no Wi-Fi networks in this account. To add a new network, click the +ADD button above. Create Channel Create Channel Add Hotspot Add Hotspot 1. Select SETUP 1. Select SETUP 2. Select WiFi 2. Select WiFi 3. In the WiFi Hotspots title bar 3. In the WiFi Hotspots title bar click + ADD click + ADD Add STRIVA Device Add STRIVA Device This is the name of the hotspot. You can name the hotspot anything you want that will help you identify it easily Add Hotspot Add Hotspot Wi-Fi Network Name Nickname Security Protocol WEP/WPA key Open Security Protocol Open Show Password WEP/WPA key Show Password Save Cancel Cancel Save Widgets
+ ADD There are no STRIVA devices in this account. To add a new device, click the +ADD button above. Welcome Create Channel Add Hotspot Add STRIVA Device 1. Select SETUP 2. Select Add/Remove 3. In the Add/Remove title bar click + ADD Add a Wi-Fi hotspot Enter wireless information Add STRIVA Device Sync mode active for 3:00 Release when blue I Dont Have A STRIVA CAP PROs Next Next Next Plug in STRIVA CAP Click Next and wait for STRIVA CAP to enter sync mode Power on STRIVA PROs Congratulations!
Your STRIVA PROs are now fully operational. JOIN THE REVOLUTION For troubleshooting tips and FAQs, go to:
www.mykoss.com MODE VOLUME SWITCH STREAM SWITCH CHANNEL THUMBS UP/DN Press and hold until BLUE light illuminates to power on into Wi-Fi streaming mode SLIDE for volume Press and hold until TEAL light illuminates to power on into STRIVA CAP mode SWIPE LEFT/RIGHT for previous and next stream HOLD LEFT/RIGHT for previous and next channel SWIPE UP/DOWN for thumbs up and thumbs down To stream media from STRIVA CAP:
VOLUME CONTENT Press and hold until teal light illuminates to power on into STRIVA CAP mode CONNECT STRIVA CAP to media source using USB to audio cable SLIDE for volume CONTROL content from device Long Mini USB to Audio Short Mini USB to USB Short Mini USB to Audio Long Mini USB to USB POWER ADAPTER IN THE BOX CORDED LISTENING CHARGING STRIVA CAP/PRO STREAMING MUSIC FROM STRIVA CAP STRIVA CAP/PRO SETUP AND CHARGING FOR CHARGING
WARNING Please read these safety warnings carefully to ensure your personal safety and prevent property damage. KOSS CORPORATION 4129 N PORT WASHINGTON AVE MILWAUKEE, WISCONSIN 1-800-USA-KOSS (1-800-872-5677) / WWW.KOSS.COM KOSS EUROPE: CH 6855 STABIO SWITZERLAND Do not leave your STRIVA devices in close proximity to open ames or extreme sources of heat. Do not expose your STRIVA devices to liquid or extreme humidity. Do not drop, disassemble, microwave, incinerate or paint your STRIVA devices. Do not expose your STRIVA devices to extreme high or low temperatures. Clean your STRIVA devices with a clean, dry cloth. Do not leave your STRIVA devices in direct sunlight for an extended period of time. Do not dispose of your STRIVA devices in a re. The battery could explode causing injury or death. Do not attempt to clean your STRIVA devices while they are being charged. Only charge your STRIVA devices with the components supplied with the STRIVA devices. Do not attempt to disable the STRIVA devices, chargers or cables or force open the built-in battery. Do not charge your STRIVA devices in damp areas or in extreme high or low temperatures. Do not leave or store the STRIVA devices or any of their accessories near or over your automobiles airbags, because serious injury may result when an airbag deploys. Product features and specications are subject to change without notice. Product may vary from images shown. Listen at moderate volumes to avoid hearing damage. KOSS, THE SOUND OF KOSS, KOSS and Design, and HEARING IS BELIEVING are Registered in U.S. Patent and Trademark Oce and are trademarks of the KOSS Corporation in other countries. STRIVA is a trademark of Koss Corporation. For patent information, see www.koss.com/patent Made in the USA of U.S. and imported components. For more technical and safety information, go to www.koss.com 2012 KOSS. Reproduction in whole or part is prohibited. All rights reserved. This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the Koss Corporation may void the user's authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. M/N:
FCC ID:L76-PRO IC:10021A-PRO M/N:
FCC ID:L76-CAP IC:10021A-CAP