| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
user manual | Users Manual | 770.98 KiB | August 07 2019 / February 03 2020 | delayed release | ||
| 1 |
|
Internal Photos | Internal Photos | 497.24 KiB | August 07 2019 / February 03 2020 | delayed release | ||
| 1 |
|
External Photos | External Photos | 396.81 KiB | August 07 2019 / February 03 2020 | delayed release | ||
| 1 |
|
Label | ID Label/Location Info | 54.19 KiB | August 07 2019 | |||
| 1 |
|
Agent Authorization Rev 1.0 | Cover Letter(s) | 18.30 KiB | August 07 2019 | |||
| 1 | Block | Block Diagram | August 07 2019 | confidential | ||||
| 1 |
|
FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 21.88 KiB | August 07 2019 | |||
| 1 | Operational Description | Operational Description | August 07 2019 | confidential | ||||
| 1 |
|
RF Exporure | RF Exposure Info | 17.27 KiB | August 07 2019 | |||
| 1 |
|
S19071205002001-EDR | Test Report | 3.07 MiB | August 07 2019 | |||
| 1 | Schematics | Schematics | August 07 2019 | confidential | ||||
| 1 | Test Setup photo | Test Setup Photos | August 07 2019 / February 03 2020 | delayed release | ||||
| 1 |
|
models declaration letter. | Cover Letter(s) | 135.53 KiB | August 07 2019 |
| 1 | user manual | Users Manual | 770.98 KiB | August 07 2019 / February 03 2020 | delayed release |
2 English Deutsch Espaol Franais Dansk 4 10 16 22 28 This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at:
www.kreafunk.com/declaration-of-conformity/
3 English Operation manual 4 SAFETY AND MAINTENANCE INSTRUCTIONS 1. Please read this operation manual carefully before use. 2. The safety and operating instructions in this operation manual should be retained for future reference and must be followed at all times. 3. Keep the product away from heat sources such as radiators, heaters or other appliances that produce heat. 4. Do not expose the product to direct sunlight for longer periods. High temperatures will shorten the life of the product, destroy the battery and distort certain plastic parts. 5. Do not expose the product to extreme cold as it may damage the internal circuit board. internal circuit board. professional. bathroom. product. to the plastic parts. adhered to. 6. Avoid liquids getting into the product. 7. Do not throw with or stamp on the product. This may damage the 8. Do not try to disassemble the product. This must only be done by a 9. The product should not be immersed in water, nor used in the shower or 10. Do not use concentrated chemical products or detergent to clean the 11. Keep the surface away from sharp things, as these may cause damage 12. All warnings on the appliance and in this operation manual should be 13. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The product must not be exposed to dripping or splashing, nor objects filled with liquids. 5 If you do experience any problems with your product please contact the retailer you purchased the speaker from. The retailer will provide you with guidance and if that does not solve the problem the retailer will handle the claim directly with KREAFUNK. PRODUCT PARTS 2 3 6 4 5 1 1. Leather strap 2. Speaker drivers 3. Multi-functional button 4. Micro USB charging port 5. Passive bass outlet 6. LED light 6 GETTING STARTED CHARGING THE DEVICE Insert the included charging cable in a USB charging port. The LED light on the back of aOWL will display a red light while charging. When aOWL is fully charged, the LED light will turn green. Charging aOWL takes up to 8 hours depending on the input power. You can use aOWL while charging. The LED light will turn purple when aOWL is being used and charges simultaneously. POWER ON / BLUETOOTH MODE Press and hold the multi-functional button for at least 2 seconds. The LED light on the back of aOWL will flash blue and a short owl hoot prompts. POWER OFF Press and hold the multi-functional button for at least 2 seconds. The LED light on the back of aOWL will turn off and a long owl hoot prompts. If aOWL is inactive for more than 1 hour it will turn off automatically. CONNECTING WITH BLUETOOTH When aOWL is in power on mode it is automatically also in Bluetooth connection mode. Connect to aOWL using the instructions for your music playing device
(smartphone, tablet, computer etc.). Upon successful Bluetooth connection the LED light on the back of aOWL will be solid blue and a double owl hoot prompts. 7 BASIC aOWL DICTIONARY 1 short hoot for power on 1 long hoot for power off 2 hoots when a Bluetooth connection has been established When aOWL says low battery it needs to be charged CONNECT USING NFC Use your NFC compatible device to easily connect to aOWL by simply bringing it in a 4m radius of aOWL or place the phone over the top of the speaker. Your NFC compatible device must be in a pairing mode and aOWL must have been released from all other Bluetooth connections for this to work. RELEASE BLUETOOTH CONNECTION While aOWL is in the power on mode, double press the multi-
functional button quickly to release it from its current Bluetooth connection, and then aOWL can be connected to another device via Bluetooth. 8 TECHNICAL FEATURES Up to 11 hours playback time
(80% vol.) Bluetooth 4.2 NFC (near-field communication) connection ability Woven Kevlar speaker drivers Bluetooth range: 10 m Passive bass Dimensions: 145x118x91 mm
(HxWxD) Weight: 0.50 kg Drivers: 2x52 mm 5W 4 Charging input: 5V / 300-
Built-in Lithium battery: 3.7V 1000mA 2200 mAh 9 Deutsch Bedienungshandbuch 10 SICHERHEITS- UND WARTUNGSANLEITUNG 1. Bitte lesen Sie diese Bedienungsanleitung vor dem Gebrauch sorgfltig durch. 2. Die Sicherheits- und Betriebsanweisungen dieser Bedienungsanleitung sollten fr zuknftige Bezugnahme aufbewahrt werden und mssen jederzeit befolgt werden. 3. Halten Sie das Produkt von Wrmequellen wie Heizkrpern, Heizgerten oder anderen Wrme erzeugenden Gerten fern. 4. Setzen Sie das Produkt nicht fr lngere Zeit direktem Sonnenlicht aus. Hohe Temperaturen verkrzen die Lebensdauer des Produkts, zerstren die Batterie und verformen bestimmte Kunststoffteile. 5. Setzen Sie das Produkt nicht extremer Klte aus, da dies die interne Leiterplatte beschdigen kann. 6. Vermeiden Sie, dass Flssigkeiten in das Produkt gelangen. 7. Nicht das Produkt werfen oder auf das Produkt draufstellen. Dies knnte den internen Schaltkreis beschdigen. 8. Versuchen Sie nicht, das Produkt zu zerlegen. Dies darf nur von einem 9. Das Produkt sollte nicht in Wasser eingetaucht oder in der Dusche oder Fachmann durchgefhrt werden. im Badezimmer verwendet werden. 10. Verwenden Sie keine konzentrierten chemischen Produkte oder Reinigungsmittel, um das Produkt zu reinigen. 11. Halten Sie die Oberflche von scharfen Gegenstnden fern, da diese das Kunststoff beschdigen knnen. 12. Alle Warnungen auf dem Gert und in der Bedienungsanleitung sind zu beachten. 11 13. WARNUNG: Um die Brandgefahr und das Stromschlagrisiko zu verringern, setzen Sie dieses Produkt weder Regen noch Feuchtigkeit aus. Das Produkt darf keinen tropfenden oder spritzenden Flssigkeiten ausgesetzt werden. Wenn Sie Probleme mit Ihrem Produkt haben, wenden Sie sich bitte an den Hndler, bei dem Sie den Lautsprecher gekauft haben. Der Hndler wird Sie beraten und wenn dies das Problem nicht lst, wird der Hndler die Reklamation direkt mit KREAFUNK abwickeln. PRODUKTTEILE 2 3 6 4 5 1 12 1. Lederriemen 2. Lautsprecher-Treiber 3. Multifunktionstaste 4. USB-zu-Micro-USB-Anschluss 5. Passiver Bassausgang 6. LED-Leuchte ERSTE SCHRITTE DAS GERT AUFLADEN Stecken Sie das mitgelieferte Ladekabel in einen USB-
Ladeanschluss. Die LED-
Leuchte auf der Rckseite von aOWL leuchtet whrend des Ladevorgangs rot auf. Wenn aOWL vollstndig geladen ist, leuchtet die LED-Anzeige grn. Das Laden von aOWL dauert je nach Eingangsleistung bis zu 8 Stunden. Sie knnen aOWL whrend des Ladevorgangs verwenden. Die LED-Leuchte leuchtet violett, wenn aOWL verwendet und gleichzeitig aufgeladen wird. 13 EINSCHALTEN /
BLUETOOTH-MODUS Drcken und halten Sie die Multifunktionstaste mindestens 2 Sekunden lang. Die LED-Leuchte auf der Rckseite von aOWL blinkt blau und ein kurzer Eulen-Sound ertnt. AUSSCHALTEN Drcken und halten Sie die Multifunktionstaste mindestens 2 Sekunden lang. Die LED-Leuchte auf der Rckseite von aOWL schaltet sich aus und ein langer Eulen-Sound ertnt. Wenn aOWL lnger als 1 Stunde inaktiv ist, schaltet er sich automatisch aus. 14 MIT BLUETOOTH VERBINDEN Wenn aOWL eingeschaltet ist, befindet er sich automatisch im Bluetooth-Verbindungsmodus. Verbinden Sie Ihr Gert mit aOWL anhand der Anleitung fr Ihr Musikwiedergabegert
(Smartphone, Tablet, Computer usw.). Bei erfolgreicher Bluetooth-
Kopplung leuchtet die LED-Leuchte auf der Rckseite von aOWL blau und es ertnen zwei Eulen-Sounds. MIT NFC VERBINDEN Verwenden Sie Ihr NFC-
kompatibles Gert, um es mit aOWL zu verbinden, indem Sie es einfach in einen 4 Meter Radius von aOWL bringen oder das Telefon auf die Oberseite des Lautsprechers legen. Ihr NFC-kompatibles Gert muss sich im Kopplungs-Modus befinden und aOWL muss von allen anderen Bluetooth-Verbindungen freigegeben sein, damit dies funktioniert. BLUETOOTH-VERBINDUNG AUFHEBEN Whrend sich aOWL im eingeschalteten Modus befindet, drcken Sie die Multifunktionstaste zweimal kurz, um die aktuelle Bluetooth-Verbindung zu trennen und dann kann aOWL ber Bluetooth mit einem anderen Gert verbunden werden. KLEINES aOWL WRTERBUCH 1 kurzer Eulen-Sound fr eingeschaltet 1 langer Eulen-Sound fr ausgeschaltet 2 Eulen-Sounds, wenn eine Bluetooth-Verbindung hergestellt wurde Wenn der aOWL low battery angibt, muss er geladen werden TECHNISCHE EIGENSCHAFTEN Bis zu 11 Stunden Wiedergabezeit (80 %
Lautstrke) Bluetooth 4.2 NFC-Verbindungsfhigkeit (dt. Nahfeldkommunikation) Lautsprecher-Treiber mit Kevlar Bluetooth Reichweite: 10 m Passiver Bass Masse: 145x118x91 mm
(HxWxD) Gewicht: 0,50 kg Treiber: 2 x 52 mm 5W 4 Ladeeingang: 5 V, 300-1000 mA Eingebauter Lithiumakku: 3,7 V 2200 mAh 15 Espaol Manual de instrucciones 16 INSTRUCCIONES DE SEGURIDAD Y MANTENIMIENTO 1. Por favor, lea con atencin este manual de instrucciones antes del uso. 2. Conserve las instrucciones de seguridad y funcionamiento de este manual para consultarlas en el futuro y sgalas en todo momento. 3. Mantenga el producto alejado de fuentes de calor como radiadores, calentadores y otros aparatos que produzcan calor. 4. No exponga el producto a la luz solar directa por periodos largos. Las altas temperaturas acortarn la vida til del producto ya que destruirn la batera y deformarn ciertas partes plsticas. 5. No exponga el producto al fro extremo, ya que puede daar la placa de circuito interna. 6. Evite que el producto entre en contacto con lquidos. 7. No arroje ni pise el producto. Esto puede daar la placa de circuito 8. No intente desarmar el producto. Esto solo lo puede hacer un 9. El producto no debe sumergirse en agua ni usarse en la ducha o el 10. No use productos qumicos concentrados o detergentes para limpiar el 11. Mantenga la superficie alejada de objetos filosos, ya que pueden daar las partes plsticas. 12. Se deben respetar todas las advertencias indicadas en el aparato y en las instrucciones de funcionamiento. 13. ADVERTENCIA: para reducir el riesgo de incendio o descarga elctrica, no exponga este producto a la lluvia o humedad. No exponga el producto a salpicaduras o goteos, ni a objetos que contengan lquidos. interna. profesional. bao. producto. 17 Si tiene cualquier problema con su producto, pngase en contacto con la tienda donde compr el altavoz. La tienda minorista le orientar sobre lo que debe hacer, y si eso no resuelve el problema, el minorista manejar el reclamo directamente con KREAFUNK. PARTES DEL PRODUCTO 3 6 4 5 1 2 1. Correa de cuero 2. Controladores del altavoz 3. Botn multifuncional 4. Puerto de carga micro USB 5. Salida de bajo pasivo 6. Luz LED 18 CMO EMPEZAR CARGAR EL DISPOSITIVO Inserte el cable de carga que viene incluido en un puerto de carga USB. La luz LED en la parte posterior del aOWL mostrar una luz roja mientras se est cargando. Cuando el aOWL est completamente cargado, la luz LED se pondr verde. El proceso de carga del aOWL puede durar hasta ocho horas dependiendo de la potencia de entrada. Puede usar el aOWL mientras se carga. La luz LED se pondr morada cuando est usando y cargando el aOWL simultneamente. ENCENDER / MODO BLUETOOTH Mantenga presionado el botn multifuncional durante al menos dos segundos. La luz LED en la parte posterior del aOWL parpadear en azul acompaada de un breve sonido de bho. APAGAR Mantenga presionado el botn multifuncional durante al menos dos segundos. La luz LED en la parte posterior del aOWL se apagar acompaada de un largo sonido de bho. Si el aOWL permanece inactivo por ms de una hora, se apagar automticamente. CONECTAR CON BLUETOOTH Cuando el aOWL est encendido, tambin est automticamente en modo de conexin con Bluetooth. Conctese a aOWL siguiendo las instrucciones de su dispositivo de reproduccin de msica (telfono inteligente, tableta, computadora, etc.). Despus de haberse conectado exitosamente con Bluetooth, la luz LED en la parte posterior del aOWL se pondr azul y emitir un doble sonido de bho. 19 DICCIONARIO BSICO DE aOWL Un breve sonido de bho indica Un largo sonido de bho indica encendido apagado Dos sonidos de bho indican que se ha establecido una conexin con Bluetooth Cuando el aOWL dice low battery necesita ser cargado CONECTAR USANDO NFC Use su dispositivo compatible con NFC para conectarse fcilmente al aOWL simplemente colocndolo en un radio de 4 metros del aOWL o coloque el telfono en la parte superior del altavoz. Su dispositivo compatible con NFC debe estar en modo de conexin y debe haber liberado el aOWL de todas las dems conexiones de Bluetooth para que esto funcione. LIBERAR LA CONEXIN DE BLUETOOTH Mientras el aOWL est encendido, presione rpidamente dos veces el botn multifuncional para liberar el aOWL de sus conexiones de Bluetooth actuales, y luego podr conectarlo con otro dispositivo a travs de Bluetooth. 20 CARACTERSTICAS TCNICAS Hasta 11 horas de tiempo de reproduccin (80% de volumen) Bluetooth 4.2 Disponibilidad de conexin NFC (near-field communication
[comunicacin de campo cercano]) Controladores de altavoz en tejido de Kevlar Rango de Bluetooth: 10 metros Bajo pasivo Dmensiones: 145x118x91 mm
(AAP) Peso: 0.50 kg Controladores: 2x52 mm 5W 4 Potencia de carga: 5V, 300-
Batera de litio integrada : 3.7V 1000mA
/ 2200 mAh 21 Franais Manuel dutilisation 22 INSTRUCTIONS DE SCURIT ET DENTRETIEN 1. Veuillez lire attentivement ce mode demploi avant utilisation. 2. Les consignes de scurit et dutilisation de ce manuel dutilisation doivent tre conserves pour sy rfrer ultrieurement et doivent tre suivies tout moment. 3. Gardez le produit lcart des sources de chaleur telles que les radiateurs ou tout autre appareil produisant de la chaleur. 4. Nexposez pas lappareil la lumire directe du soleil pendant de longues priodes. Des tempratures leves rduisent la dure de vie de lappareil, dtruisent la batterie et dforment certaines pices en plastique. 5. Nexposez pas le produit un froid extrme car cela pourrait endommager le circuit imprim interne. 6. vitez que des liquides ne pntrent dans lappareil. 7. Ne pas faire subir de chocs lappareil. Cela pourrait endommager le 8. Nessayez pas de dmonter lappareil. Cela ne doit tre fait que par un 9. Lappareil ne doit pas tre immerg, ni utilis dans une douche ou une 10. Nutilisez pas de produits chimiques concentrs ou de dtergent pour circuit imprim interne. professionnel. salle de bain. nettoyer lappareil. 11. Gardez les objets pointus lcart de la surface de lappareil, car ceux-ci pourraient endommager les pices en plastique. 12. Tous les avertissements indiqus sur lappareil et dans le mode demploi doivent tre respects. 23 13. AVERTISSEMENT : Pour rduire le risque dincendie ou de choc lectrique, nexposez pas cet appareil la pluie ou lhumidit. Le produit ne doit pas tre expos des gouttes ou des claboussures, ni des objets remplis de liquides. Si vous rencontrez des problmes avec votre appareil, veuillez contacter le revendeur auprs duquel vous avez achet lenceinte. Le revendeur vous guidera et si cela ne rsout pas le problme, il traitera la rclamation directement avec KREAFUNK. PICES DE LAPPAREIL 2 3 6 4 5 1 24 1. Sangle en cuir 2. Amplis de lenceinte 3. Bouton multifonctionnel 4. Port de chargement micro USB 5. Sortie de bass passive 6. Voyant LED DMARRAGE CHARGER LAPPAREIL Insrez le cble de chargement inclus dans le port de chargement USB. Le voyant larrire de laOWL affichera une lumire rouge pendant le chargement. Lorsque laOWL est compltement charg, le voyant LED devient vert. Le chargement de lAOWL prend jusqu 8 heures en fonction de la puissance dentre. Vous pouvez utiliser laOWL pendant le chargement. La lumire LED devient violette lorsque laOWL est utilis et charge simultanment. MISE SOUS TENSION /
MODE BLUETOOTH Appuyez sur le bouton multifonctionnel et maintenez-
le enfonc pendant au moins 2 secondes. Le voyant LED larrire de lAOWL clignotera en bleu et un court hululement de hibou se produira. TEINDRE LAPPAREIL Appuyez sur le bouton multifonctionnel et maintenez-
le enfonc pendant au moins 2 secondes. Le voyant LED larrire de laOWL steindra et un long hululement de hibou se produira. Si laOWL est inactif pendant plus dune heure, il steint automatiquement. CONNECTION AVEC LE BLUETOOTH Lorsque laOWL est sous tension, il est galement automatiquement en mode de connexion Bluetooth. 25 Connectez-vous aOWL en utilisant les instructions de votre lecteur de musique (smartphone, tablette, ordinateur, etc). Si la connexion Bluetooth est russie, le voyant larrire de laOWL deviendra bleu et un double hululement de hibou se produira. RALISER UNE CONNECTION NFC Utilisez votre appareil compatible NFC pour vous connecter facilement laOWL en le plaant simplement dans un rayon de 4 m ou en plaant le tlphone sur lenceinte. Votre appareil compatible NFC doit tre en mode de jumelage et laOWL doit avoir t libr de toutes les autres connexions Bluetooth pour que cela fonctionne. ARRTER LA CONNECTION BLUETOOTH Lorsque laOWL est sous tension, faites deux appuis rapides sur le bouton multifonctionnel pour le librer de sa connexion Bluetooth actuelle, puis connectez-vous un autre appareil via le Bluetooth. DICTIONAIRE aOWL DE BASE 1 court hululement pour une mise sous tension 1 long hululement pour teindre lappareil 2 hululements lorsquune connexion Bluetooth a t tablie Lorsque laOWL dit low battery, il doit tre charg 26 CARACTRISTIQUES TECHNIQUES Jusqu 11 heures de lecture (
80% du vol.) Bluetooth 4.2 Possibilit de connexion NFC
(communication en champ proche) Haut-parleurs tisss en Kevlar Porte Bluetooth : 10 m Bass passive Dimensions : 145x118x91 mm Poids : 0.50 kg Haut-parleurs : 2x52 mm 5W Entre de charge : 5V, 300-
(HxLxL) 4 1000mA Batterie de intgre en Lithium:
3.7V / 2200 mAh 27 Dansk Brugermanual 28 SIKKERHEDS- OG VEDLIGEHOLDELSESINSTRUKTIONER 1. Ls venligst denne brugermanual omhyggeligt fr bGEM tages i brug. 2. Sikkerheds- og betjeningsvejledningerne i denne brugermanual skal opbevares til fremtidig brug og skal til enhver tid flges. 3. Hold produktet vk fra radiatorer, varmeapparater og andre apparater, der afgiver varme. 4. Placer ikke produktet i direkte sollys. Hje temperaturer vil forkorte produktets levetid, delgge batteriet og beskadige visse plastdele. 5. Udst ikke produktet for ekstrem kulde, da det kan beskadige 6. Undg at vsker kommer ind i produktet. 7. Smid ikke med produktet, da det kan beskadige printkortet. 8. Forsg ikke at skille produktet ad. Dette m kun udfres af en 9. Dette produkt m ikke udsttes for vand, ej heller bruges i badet eller 10. Brug ikke kemiske produkter eller vaskemiddel til at rengre produktet. 11. Hold overfladen vk fra skarpe ting, da disse kan skade plastikdelene. 12. Alle advarslerne p produktet og i operationsmanualen skal overholdes. 13. ADVARSEL: For at mindske risikoen for brand eller elektrisk chok, undg at udstte dette produkt for regn eller fugt. Dette produkt m ikke udsttes for dryp eller plask, ej heller objekter fyldt med vsker. printkortet. professionel. badevrelset. 29 Hvis du oplever nogle problemer med dit produkt, s kontakt venligst den forhandler, hvorfra du har kbt hjtaleren. Forhandleren vil supplere dig med vejledning, og hvis dette ikke er nok til at lse problemet, srger forhandleren for at lse sagen direkte med KREAFUNK. PRODUKTDELE 2 3 6 4 5 1 1. Lderrem 2. Hjtalerdrivere 3. Multifunktionsknap 4. Micro USB opladerport 5. Passiv bas udgang 6. LED lys 30 SLUK Tryk og hold multifunktionsknappen nede i mindst 2 sekunder. LED-
lyset bag p aOWL slukkes og et langt ugletud spilles. Hvis aOWL er inaktiv i mere end 1 time, slukkes den automatisk. FORBIND VIA BLUETOOTH Nr aOWL er tndt, er den automatisk ogs i Bluetooth-
forbindelsesmode. Forbind til aOWL ved at flge instrukserne for den enhed, der skal afspille musik (smartphone, tablet, computer etc.). Nr der er opnet Bluetooth-forbindelse, vil LED-lyset bag p aOWL lyse konstant blt og et dobbelt ugletud spilles. KOM I GANG SDAN OPLADES ENHEDEN Indst det inkluderede opladerkabel i en USB opladningsport. LED-lyset p bagsiden af aOWL vil lyse rdt under opladning. Nr aOWL er fuldt opladt, vil LED-lyset lyse grnt. Opladning af aOWL tager op til 8 timer alt afhngig af input strmniveauet. Du kan bruge aOWL under opladning. LED-lyset lyser lilla, nr aOWL bruges og oplades samtidigt. TND / BLUETOOTH MODE Tryk og hold multifunktionsknappen nede i mindst 2 sekunder. LED lyset bag p aOWL vil blinke blt og et kort ugletud spilles. 31 BASIS UDTRYK FOR aOWL 1 kort hyl for tndt 1 langt hyl for slukket 2 hyl nr en Bluetooth-
forbindelse er etableret Nr aOWL siger low battery, skal den oplades. FORBIND VIA NFC Brug din NFC kompatible enhed for nemt at forbinde til aOWL, ved blot at have dem inden for en radius af 4 meter fra hinanden eller placer enheden oven p hjtaleren. Din NFC-kompatible enhed skal vre i parringsmode, og aOWL m ikke vre forbundet til andre Bluetooth-
enheder for at dette skal fungere. AFBRYD BLUETOOTH FORBINDELSE Mens aOWL er tndt, tryk da to gange p multifunktionsknappen hurtigt for at afbryde fra den nuvrende Bluetooth-forbindelse, og herefter kan aOWL forbindes til en anden enhed via Bluetooth. 32 TEKNISKE SPECIFIKATIONER Op til 11 timers spilletid (80%
vol.) Bluetooth 4.2 NFC (near-field communication) forbindelsesmulighed. Vvet Kelvar hjtalerdrivere Bluetooth radius: 10 meter Fyldig og rig lydkvalitet Passiv bas Ml: 145x118x91 mm (HxBxD) Vgt 0,50 kg Drivere: 2x52 mm 5W 4 Opladningsinput: 5V, 300-
1000mA Indbygget Lithiumbatteri: 3.7V 2200 mAh 33 FCC STATEMENT This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Important:
Changes or modifications to this product not authorized and could void the FCC compliance and negate your authority to operate the product. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.
| 1 | Internal Photos | Internal Photos | 497.24 KiB | August 07 2019 / February 03 2020 | delayed release |
| 1 | External Photos | External Photos | 396.81 KiB | August 07 2019 / February 03 2020 | delayed release |
| 1 | Agent Authorization Rev 1.0 | Cover Letter(s) | 18.30 KiB | August 07 2019 |
KREAFUNK APS Agent Authorization Company: KREAFUNK APS Address: Mindet 6D, 8000 Aarhus C, Denmark Product Name: aOWL Bluetooth Speaker Model Number(s): aOWL,Kfla01,Kfla02,Kfla03,Kfla04 Product Description: Its an aOWL Bluetooth speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Name:
Ruben Fog-Fredsgaard General Manager Company: KREAFUNK APS Title:
Date: 2019-07-15
| 1 | FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 21.88 KiB | August 07 2019 |
KREAFUNK APS Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019-07-16 Subject; Request for Confidentiality FCC ID: 2ACVC-AOWL2 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: Ruben Fog-Fredsgaard Title: General Manager
| 1 | RF Exporure | RF Exposure Info | 17.27 KiB | August 07 2019 |
FCC ID: 2ACVC-AOWL2 Portable device According to 15.247(e)(i) and 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commissions guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)][f(GHZ)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where:
f(GHZ) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Antenna Type: PCB Antenna Antenna Gain: 2 dBi Modulation GFSK
/4-
DQPSK Channel Freq.
(GHz) 2.402 2.441 2.480 2.402 2.441 2.480 Conduct ed power
(dBm) Conducte d power
(mW) Tune-up power
(dBm) Max tune-up power
(dBm) Max tune-up power
(mW) Distance
(mm) Result calculatio n 1g SAR Exclusion threshold SAR test exclusion
-3.76
-3.53
-3.97
-2.69
-2.47
-2.88 0.421 0.444 0.401 0.538 0.566 0.515 51 51 51 2.51 2.51 2.51 6.0 6.0 6.0 3.5 3.5 3.5 3.981 3.981 3.981 2.239 2.239 2.239
<5
<5
<5
<5
<5
<5 1.23400 1.24398 1.25388 0.69393 0.69954 0.70511 3.00 3.00 3.00 3.00 3.00 3.00 YES YES YES YES YES YES Conclusion:
For the max result: 1.25388 3.0 for 1-g SAR, No SAR is required. Signature: Date: 2019-07-10 NAME AND TITLE (Please print or type): Jason Chen /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China
| 1 | S19071205002001-EDR | Test Report | 3.07 MiB | August 07 2019 |
Report No.: S19071205002001 RADIO TEST REPORT FCC ID: 2ACVC-AOWL2 Product: aOWL Bluetooth Speaker Trade Mark: Kreafunk Model No.: aOWL Series Model: Kfla01,Kfla02,Kfla03,Kfla04 Report No.: S19071205002001 Prepared for KREAFUNK APS Mindet 6D, 8000 Aarhus C, Denmark Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China Tel.: +86-755-6115 6588 Fax.: +86-755-6115 6599 Website:http://www.ntek.org.cn Version.1.2 Page 1 of 48 Report No.: S19071205002001 TABLE OF CONTENTS 1 2 3 TEST RESULT CERTIFICATION ...................................................................................................................... 3 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 FACILITIES ..................................................................................................................................................... 5 3.1 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 SUPPORT EQUIPMENT ............................................................................................................................... 10 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 TEST REQUIREMENTS .................................................................................................................................... 13 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.1 RADIATED SPURIOUS EMISSION ............................................................................................................ 14 7.2 NUMBER OF HOPPING CHANNEL ........................................................................................................... 27 7.3 HOPPING CHANNEL SEPARATION MEASUREMENT ........................................................................... 29 7.4 AVERAGE TIME OF OCCUPANCY (DWELL TIME) ................................................................................ 32 7.5 20DB BANDWIDTH TEST ........................................................................................................................... 35 7.6 PEAK OUTPUT POWER .............................................................................................................................. 38 7.7 CONDUCTED BAND EDGE MEASUREMENT ......................................................................................... 41 7.8 7.9 SPURIOUS RF CONDUCTED EMISSION .................................................................................................. 44 7.10 ANTENNA APPLICATION .......................................................................................................................... 48 6.1 6.2 6.3 7 Version.1.2 Page 2 of 48 Report No.: S19071205002001 1 TEST RESULT CERTIFICATION Applicants name ....................... : KREAFUNK APS Address ..................................... : Mindet 6D, 8000 Aarhus C, Denmark Manufacturer's Name ................. : Shenzhen HeYouTai Technology Co., Ltd. Address ..................................... : No 6, Second Lane, Longhua 5th Industrial Zone, Shangtang Indust rial West Road, Longhua New District, Shenzhen, China Product description Product name ............................ : aOWL Bluetooth Speaker Model and/or type reference ..... : aOWL Series Model .............................. : Kfla01,Kfla02,Kfla03,Kfla04 Measurement Procedure Used:
STANDARD/ TEST PROCEDURE TEST RESULT APPLICABLE STANDARDS FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C KDB 174176 D01 Line Conducted FAQ v01r01 ANSI C63.10-2013 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report. Date of Test
:
Jun. 27. 2019 ~ Jul. 07. 2019 Testing Engineer Technical Manager Authorized Signatory
:
:
:
(Mary Hu)
(Jason Chen)
(Sam Chen) Version.1.2 Page 3 of 48 2 SUMMARY OF TEST RESULTS Report No.: S19071205002001 Standard Section 15.207 15.209 (a) 15.205 (a) 15.247(a)(1) 15.247(b)(1) 15.247(a)(iii) 15.247(a)(iii) 15.247(a)(1) 15.247 (d) 15.247 (d) 15.203 FCC Part15 (15.247), Subpart C Test Item Conducted Emission Radiated Spurious Emission Hopping Channel Separation Peak Output Power Number of Hopping Frequency Dwell Time Bandwidth Band Edge Emission Spurious RF Conducted Emission Antenna Requirement Verdict PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Remark standards and without any deviation during Remark:
N/A denotes test is not applicable in this Test Report. 1. 2. All test items were verified and recorded according to the the test. Version.1.2 Page 4 of 48 Report No.: S19071205002001 3 FACILITIES AND ACCREDITATIONS 3.1 FACILITIES All measurement facilities used to collect the measurement data are located at 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Baoan District, Shenzhen 518126 P.R. China. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication 22. 3.2 LABORATORY ACCREDITATIONS AND LISTINGS Site Description CNAS-Lab.
: The Labo ratory has been assessed and proved to be in compliance with IC-Registration FCC- Accredited A2LA-Lab. Name of Firm Site Location CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L5516. The Certificate Registration Number is 9270A-1. Test Firm Registration Number: 463705. Designation Number: CN1184 The Certificate Registration Number is 4298.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqu dated 8 January 2009).
: Shenzhen NTEK Testing Technology Co., Ltd.
: 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Baoan District, Shenzhen 518126 P.R. China. 3.3 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. Item Conducted Emission Test RF power, conducted Spurious emissions, conducted All emissions, radiated(30MHz~1GHz) All emissions, radiated(1GHz~6GHz) All emissions, radiated(6GHz) Temperature Humidity Uncertainty 2.80dB 0.16dB 0.21dB 2.64dB 2.40dB 2.52dB 0.5C 2%
No. 1 2 3 4 5 6 7 8 Version.1.2 Page 5 of 48 Report No.: S19071205002001 4 GENERAL DESCRIPTION OF EUT Equipment Trade Mark FCC ID Model No. Product Feature and Specification aOWL Bluetooth Speaker Kreafunk 2ACVC-AOWL2 aOWL Series Model Kfla01,Kfla02,Kfla03,Kfla04 Model Difference All the models are the same circuit and RF module. Except the appearance and color. Operating Frequency 2402MHz~2480MHz Modulation GFSK, /4-DQPSK Bluetooth Version BT V4.2 Number of Channels 79 Channels Antenna Type PCB Antenna Antenna Gain 2 dBi Power supply DC supply:
DC 3.7V/500mAh from Battery or DC 5V from USB Port. Adapter supply:
HW Version 1.0 1.0 SW Version Note: Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Version.1.2 Page 6 of 48 Report No.: S19071205002001 Revision History Report No. S19071205002001 Version Rev.01 Description Initial issue of report Issued Date Jul. 10, 2019 Version.1.2 Page 7 of 48 Report No.: S19071205002001 5 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. Test of channel included the lowest and middle and highest frequency to perform the test, then record on this report. Those data rates (1Mbps for GFSK modulation; 2Mbps for /4-DQPSK modulation; 3Mbps for 8-DPSK modulation) were used for all test. The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement X, Y, and Z-plane. The X-plane results were found as the worst case and were shown in this report. Carrier Frequency and Channel list:
Channel Frequency(MHz) 0 1 39 40 77 78 2402 2403 2441 2442 2479 2480 Note: fc=2402MHz+k1MHz k=0 to 78 The following summary table is showing all test modes to demonstrate in compliance with the standard. Final Test Mode Mode 1 For AC Conducted Emission Description normal link mode Note: AC power line Conducted Emission was tested under maximum output power. Final Test Mode Description For Radiated Test Cases Note: For radiated test cases, the worst mode data rate 1Mbps was reported only, because this data rate has the highest RF output power at preliminary tests, and no other significantly frequencies found in conducted spurious emission. Mode 1 Mode 2 Mode 3 Mode 4 Final Test Mode Mode 2 Mode 3 Mode 4 Mode 5 normal link mode CH00(2402MHz) CH39(2441MHz) CH78(2480MHz) For Conducted Test Cases Description CH00(2402MHz) CH39(2441MHz) CH78(2480MHz) Hopping mode Note: The engineering test program was provided and the EUT was programmed to be in continuously transmitting mode. 1. AC power line Conducted Emission was tested under maximum output power. Version.1.2 Page 8 of 48 Report No.: S19071205002001 6 SETUP OF EQUIPMENT UNDER TEST 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM For AC Conducted Emission Mode C-1 EUT AE-1 Adapter AC PLUG For Radiated Test Cases EUT For Conducted Test Cases Measurement Instrument C2 EUT Note: 1. the temporary antenna connector is soldered on the PCB board in order to perform conducted tests and this temporary antenna connector is listed in the equipment list. 2. EUT built-in battery-powered, the battery is fully-charged. Version.1.2 Page 9 of 48 Report No.: S19071205002001 6.2 SUPPORT EQUIPMENT The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item AE-1 Equipment Adapter Model/Type No. Series No. Mfr/Brand Note N/A N/A N/A Item C-1 C-2 Cable Type USB Cable RF Cable Notes:
Shielded Type Ferrite Core NO NO NO NO Length 1.0m 0.1m
(1) The support equipment was authorized by Declaration of Confirmation.
(2) For detachable type I/O cable should be specified the length in cm inLengthcolumn.
(3) YES is means shielded with core; NO is means unshielded without core. Version.1.2 Page 10 of 48 Report No.: S19071205002001 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS Radiation& Conducted Test equipment Item 1 2 3 Kind of Equipment Manufacturer Spectrum Analyzer Spectrum Analyzer Spectrum Analyzer Aglient Agilent R&S Test Receiver 4 5 Bilog Antenna 50 Coaxial 6 7 Horn Antenna
(1-18GHz) Broadband Horn Antenna Switch
(14GHz to 40GHz) Amplifier Active Loop Antenna 11 Power Meter Test Cable R&S TESEQ Anritsu EM SCHWARZBE CK EMC SCHWARZBE CK DARE Type No. Serial No. E4407B MY45108040 Last calibration Calibrated until period 2019.05.18 2020.05.17 1 year Calibrati on N9020A MY49100060 2018.10.25 2019.10.24 1 year FSV40 ESPI7 CBL6111D 101417 2018.10.25 2019.10.24 1 year 101318 31216 2019.05.18 2020.05.17 1 year 2019.04.07 2020.04.06 1 year MP59B 6200983705 2018.05.19 2020.05.18 3 year EM-AH-1018 0 2011071402 2019.04.07 2020.04.06 1 year BBHA 9170 803 2018.11.03 2019.11.02 1 year EMC051835 FMZB 1519 SE B RPR3006W 15I00041SN 980246 2018.08.08 2019.08.07 1 year 055 2018.12.05 2019.12.04 1 year
(9KHz-30MHz) Test Cable
(30MHz-1GHz) High Test Cable(1G-40G Hz) High Test Cable(1G-40G Hz) Filter temporary antenna connector
(Note) N/A N/A N/A N/A R-01 R-02 R-03 R-04 TRILTHIC 2400MHz NTS R001 O84 N/A N/A N/A N/A 29 N/A 2018.08.06 2019.08.05 1 year 2017.04.21 2020.04.20 3 year 2017.04.21 2020.04.20 3 year 2017.04.21 2020.04.20 3 year 2017.04.21 2020.04.20 3 year 2017.04.19 2020.04.18 3 year N/A N/A N/A 8 9 10 12 13 14 15 16 17 Note:
We will use the temporary antenna connector (soldered on the PCB board) When conducted test And this temporary antenna connector is listed within the instrument list Version.1.2 Page 11 of 48 AC Conduction Test equipment Item Kind of Equipment Manufacturer Type No. Serial No. 1 Test Receiver 2 LISN R&S R&S ESCI ENV216 101160 101313 Report No.: S19071205002001 Last Calibrated until calibration 2019.05.18 2020.05.17 2019.04.17 2020.04.18 Calibration period 1 year 1 year 3 4 5 6 7 LISN 50 Coaxial Switch Test Cable
(9KHz-30MH Test Cable
(9KHz-30MH Test Cable
(9KHz-30MH z) z) z) SCHWARZBE CK ANRITSU CORP NNLK 8129 8129245 2019.05.18 2020.05.17 1 year MP59B 6200983704 2018.05.19 2020.05.18 3 year N/A N/A N/A C01 C02 C03 N/A 2017.04.21 2020.04.20 3 year N/A 2017.04.21 2020.04.20 3 year N/A 2017.04.21 2020.04.20 3 year Note: Each piece of equipment is scheduled for calibration once a year except the Aux Equipment & Test Cable which is scheduled for calibration every 2 or 3 years. Version.1.2 Page 12 of 48 Report No.: S19071205002001 7 TEST REQUIREMENTS 7.1 CONDUCTED EMISSIONS TEST 7.1.1 Applicable Standard According to FCC Part 15.207(a) and KDB 174176 D01 Line Conducted FAQ v01r01 7.1.2 Conformance Limit Frequency(MHz) 0.15-0.5 0.5-5.0 5.0-30.0 56 60 Note: 1. *Decreases with the logarithm of the frequency Quasi-peak 66-56*
Conducted Emission Limit Average 56-46*
46 50 2. The lower limit shall apply at the transition frequencies 3. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 7.1.3 Test Configuration Reference Ground EMI Receiver EUT Auxiliary Equipment Reference Ground LISN 80cm 50 80cm LISN 7.1.4 Test Procedure According to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 Conducted emissions the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room. 2. The EUT was placed on a table which is 0.8m above ground plane. 3. Connect EUT to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. 4. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40cm long. 5. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 6. LISN at least 80 cm from nearest part of EUT chassis. 7. The frequency range from 150 KHz to 30MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth(IF bandwidth=9KHz) with Maximum Hold Mode 9. For the actual test configuration, please refer to the related Item EUT Test Photos. 7.1.5 Test Results Pass Test Results Version.1.2 Page 13 of 48 7.1.6 Test Results Report No.: S19071205002001 EUT Temperature Pressure Test Voltage aOWL Bluetooth Speaker 26 1010hPa DC 5V from Adapter AC 120V/60Hz aOWL Model Name Relative Humidity 54%
Phase :
Test Mode L Mode 1 Frequency Reading Level Correct Factor Measure-ment
(MHz) 0.1580 0.1580 0.2100 0.2100 0.4940 0.4940 0.8660 0.8660 1.3500 1.3500 1.8620 1.8620
(dBV) 37.34 20.25 32.64 17.79 31.45 19.85 27.43 16.42 24.38 11.55 23.27 10.46
(dB) 9.75 9.75 9.76 9.76 9.74 9.74 9.74 9.74 9.75 9.75 9.78 9.78
(dBV) 47.09 30.00 42.40 27.55 41.19 29.59 37.17 26.16 34.13 21.30 33.05 20.24 Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Limits
(dBV) 65.56 55.56 63.20 53.20 56.10 46.10 56.00 46.00 56.00 46.00 56.00 46.00 Margin
(dB)
-18.47
-25.56
-20.80
-25.65
-14.91
-16.51
-18.83
-19.84
-21.87
-24.70
-22.95
-25.76 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Version.1.2 Page 14 of 48 EUT Temperature Pressure Test Voltage Report No.: S19071205002001 aOWL Bluetooth Speaker 26 1010hPa DC 5V from Adapter AC 120V/60Hz Model Name Relative Humidity Phase :
Test Mode aOWL 54%
N Mode 1 Frequency Reading Level Correct Factor Measure-ment
(MHz) 0.1700 0.1700 0.1940 0.1940 0.4940 0.4940 0.7940 0.7940 1.0060 1.0060 1.4220 1.4220
(dBV) 32.21 16.89 30.89 15.93 33.88 26.05 22.67 14.76 21.38 13.25 21.37 13.01
(dB) 9.73 9.73 9.73 9.73 9.75 9.75 9.75 9.75 9.75 9.75 9.76 9.76
(dBV) 41.94 26.62 40.62 25.66 43.63 35.80 32.42 24.51 31.13 23.00 31.13 22.77 Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Limits
(dBV) 64.96 54.96 63.86 53.86 56.10 46.10 56.00 46.00 56.00 46.00 56.00 46.00 Margin
(dB)
-23.02
-28.34
-23.24
-28.20
-12.47
-10.30
-23.58
-21.49
-24.87
-23.00
-24.87
-23.23 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Version.1.2 Page 15 of 48 Report No.: S19071205002001 EUT Temperature Pressure Test Voltage DC 5V from Adapter aOWL Bluetooth Speaker 26 1010hPa AC 240V/60Hz aOWL Model Name Relative Humidity 54%
Phase :
Test Mode L Mode 1 Frequency Reading Level Correct Factor Measure-ment
(MHz) 0.5180 0.5180 0.9100 0.9100 1.7140 1.7140 2.5820 2.5820 3.2860 3.2860 4.1419 4.1419
(dBV) 31.77 19.87 24.79 14.85 22.34 11.21 20.29 10.07 18.60 7.44 16.13 5.09
(dB) 9.74 9.74 9.74 9.74 9.77 9.77 9.79 9.79 9.84 9.84 9.85 9.85
(dBV) 41.51 29.61 34.53 24.59 32.11 20.98 30.08 19.86 28.44 17.28 25.98 14.94 Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Limits
(dBV) 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 Margin
(dB)
-14.49
-16.39
-21.47
-21.41
-23.89
-25.02
-25.92
-26.14
-27.56
-28.72
-30.02
-31.06 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Version.1.2 Page 16 of 48 Report No.: S19071205002001 EUT Temperature Pressure Test Voltage aOWL Bluetooth Speaker 26 1010hPa DC 5V from Adapter AC 240V/60Hz Model Name Kfla01 Relative Humidity 54%
Phase :
Test Mode N Mode 1 Frequency Reading Level Correct Factor Measure-ment
(MHz) 0.5180 0.5180 0.9060 0.9060 1.0100 1.0100 1.8300 1.8300 2.3740 2.3740 3.1700 3.1700
(dBV) 31.99 25.10 24.65 16.88 24.32 17.54 22.44 16.13 22.70 15.74 21.77 15.38
(dB) 9.75 9.75 9.75 9.75 9.75 9.75 9.79 9.79 9.81 9.81 9.88 9.88
(dBV) 41.74 34.85 34.40 26.63 34.07 27.29 32.23 25.92 32.51 25.55 31.65 25.26 Remark: 1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss. Limits
(dBV) 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 Margin
(dB)
-14.26
-11.15
-21.60
-19.37
-21.93
-18.71
-23.77
-20.08
-23.49
-20.45
-24.35
-20.74 Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG Version.1.2 Page 17 of 48 Report No.: S19071205002001 7.2 RADIATED SPURIOUS EMISSION 7.2.1 Applicable Standard According to FCC Part 15.247(d) and 15.209 and ANSI C63.10-2013 7.2.2 Conformance Limit According to FCC Part 15.247(d): radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c)). According to FCC Part15.205, Restricted bands MHz 0.090-0.110 10.495-0.505 2.1735-2.1905 4.125-4.128 4.17725-4.17775 4.20725-4.20775 6.215-6.218 6.26775-6.26825 8.291-8.294 8.362-8.366 8.37625-8.38675 8.41425-8.41475 12.29-12.293 12.51975-12.52025 12.57675-12.57725 13.36-13.41 Restricted Frequency(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30-88 88-216 216-960 Above 960 MHz 16.42-16.423 16.69475-16.69525 16.80425-16.80475 25.5-25.67 37.5-38.25 73-74.6 74.8-75.2 123-138 149.9-150.05 156.52475-156.52525 156.7-156.9 162.0125-167.17 167.72-173.2 240-285 322-335.4 MHz 399.9-410 608-614 960-1240 1300-1427 1435-1626.5 1645.5-1646.5 1660-1710 2200-2300 2310-2390 2483.5-2500 2690-2900 3260-3267 3332-3339 3345.8-3358 3600-4400 2400/F(KHz) 24000/F(KHz) 20 log (uV/m) 20 log (uV/m) 30 100 150 200 500 29.5 40 43.5 46 54 20dBc in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within the restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed. Field Strength (V/m) Field Strength (dBV/m) Measurement Distance GHz 4.5-5.15 5.35-5.46 7.25-7.75 8.025-8.5 9.0-9.2 9.3-9.5 10.6-12.7 14.47-14.5 15.35-16.2 17.7-21.4 22.01-23.12 23.6-24.0 31.2-31.8 36.43-36.5
(2) 300 30 30 3 3 3 3 AVERAGE 54 Limits of Radiated Emission Measurement (Above 1000MHz) Frequency(MHz) Class B (dBuV/m) (at 3M) PEAK Above 1000 74 Remark: 1. Emission level in dBuV/m=20 log (uV/m) 2. Measurement was performed at an antenna to the closed point of EUT distance of meters. 3. For Frequency 9kHz~30MHz:
Distance extrapolation factor =40log (Specific distance/ test distance) (dB);
Limit line=Specific limits (dBuV) + distance extrapolation factor. For Frequency above 30MHz:
Distance extrapolation factor =20log (Specific distance/ test distance) (dB);
Limit line=Specific limits (dBuV) + distance extrapolation factor. Version.1.2 Page 18 of 48 Report No.: S19071205002001 7.2.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.2.4 Test Configuration
(a) For radiated emissions below 30MHz Turntable 3m EUT 3m 1.0m 0.8 m Turntable Ground Plane
(b) For radiated emissions from 30MHz to 1000MHz
(c) For radiated emissions above 1000MHz Ground Plane Receiver 0.8m EUT Test 3m Test Receiver Coaxial Cable 1m to 4m Coaxial Cable Turntable EUT 1.5m Version.1.2 Page 19 of 48 1.5m 4m Amplifie Test Receiver Report No.: S19071205002001 7.2.5 Test Procedure The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the standards: ANSI C63.10-2013. The test distance is 3m.The setup is according to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 and CAN/CSA-CEI/IEC CISPR 22. This test is required for any spurious emission that falls in a Restricted Band, as defined in Section 15.205. It must be performed with the highest gain of each type of antenna proposed for use with the EUT. Use the following spectrum analyzer settings:
RB / VB (emission in restricted band) 1 MHz / 1 MHz for Peak, 1 MHz / 10Hz for Average Spectrum Parameter Attenuation Start Frequency Stop Frequency Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 1000 MHz 10th carrier harmonic Setting Auto 9kHz~150kHz / RB 200Hz for QP 150kHz~30MHz / RB 9kHz for QP 30MHz~1000MHz / RB 120kHz for QP a. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz. For frequencies above 1GHz, any suitable measuring distance may be used. b. The EUT was placed on the top of a rotating table 0.8 m for below 1GHz and 1.5m for above 1GHz the ground at a 3 meter. The table was rotated 360 degrees to determine the position of the highest radiation. c. The height of the equipment or of the substitution antenna shall be 0.8 m for below 1GHz and 1.5m for above 1GHz; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For the radiated emission test above 1GHz:
Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. e. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. f. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. g. For the actual test configuration, please refer to the related Item EUT Test Photos. Note:
Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported Version.1.2 Page 20 of 48 Report No.: S19071205002001 During the radiated emission test, the Spectrum Analyzer was set with the following configurations:
Frequency Band (MHz) Function Resolution bandwidth Video Bandwidth 30 to 1000 Above 1000 QP Peak Average 120 kHz 1 MHz 1 MHz 300 kHz 1 MHz 10 Hz Note: for the frequency ranges below 30 MHz, a narrower RBW is used for these ranges but the measured value should add a RBW correction factor (RBWCF) where RBWCF [dB] =10*lg (100 [kHz]/narrower RBW
[kHz]). , the narrower RBW is 1 kHz and RBWCF is 20 dB for the frequency 9 kHz to 150 kHz, and the narrower RBW is 10 kHz and RBWCF is 10 dB for the frequency 150 kHz to 30 MHz. 7.2.6 Test Results n Spurious Emission below 30MHz (9KHz to 30MHz) EUT:
Temperature:
Test Mode:
aOWL Speaker 20 Mode2/Mode3/Mode4 Test By:
Bluetooth Model No.:
Relative Humidity:
Ant.Pol. Emission Level(dBuV/m) Freq.
(MHz)
--
H/V
--
PK
--
AV
--
Kfla01 48%
Mary Hu Limit 3m(dBuV/m) PK
--
AV
--
Over(dB) PK
--
AV
--
Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible limit has no need to be reported. Version.1.2 Page 21 of 48 Report No.: S19071205002001 n Spurious Emission below 1GHz (30MHz to 1GHz) All the modulation modes have been tested, and the worst result was report as below:
EUT Temperature Pressure Test Voltage aOWL Bluetooth Speaker 20 1010hPa DC 5V from Adapter AC 120V/60Hz Model Name aOWL Relative Humidity Test Mode 48%
Mode 1 Polar
(H/V) V V V V V V Frequency Factor Limits Margin Meter Reading
(dBuV) 6.31 7.23 5.18 6.23 6.05 7.12
(dB) 17.54 12.23 17.02 24.56 27.58 28.65 Emission Level
(dBuV/m) 23.85 19.46 22.20 30.79 33.63 35.77
(MHz) 33.2112 107.8877 279.0436 550.9480 742.2586 866.0878
(dBuV/m) 40.00 43.50 46.00 46.00 46.00 46.00
(dB)
-16.15
-24.04
-23.80
-15.21
-12.37
-10.23 Remark QP QP QP QP QP QP Remark:
Absolute Level= ReadingLevel+ Factor, Margin= Absolute Level - Limit Version.1.2 Page 22 of 48 Report No.: S19071205002001 Polar
(H/V) H H H H H H Frequency Factor Limits Margin Meter Reading
(dBuV) 6.14 5.77 8.78 13.65 7.10 6.68
(dB) 18.22 16.26 13.18 15.60 27.23 30.85 Emission Level
(dBuV/m) 24.36 22.03 21.96 29.25 34.33 37.53
(MHz) 31.9546 36.1272 143.8295 292.0583 729.3582 938.8325
(dBuV/m) 40.00 40.00 43.50 46.00 46.00 46.00
(dB)
-15.64
-17.97
-21.54
-16.75
-11.67
-8.47 Remark:
Absolute Level= ReadingLevel+ Factor, Margin= Absolute Level - Limit Remark QP QP QP QP QP QP Version.1.2 Page 23 of 48 Report No.: S19071205002001 n Spurious Emission Above 1GHz (1GHz to 25GHz) EUT:
Temperature:
Test Mode:
All the modulation modes have been tested, and the worst result was report as below:
Frequency Read Level
(dBV) aOWL Bluetooth Speaker 20 Mode2/Mode3/Mode4 Model No.:
Relative Humidity: 48%
Test By:
Preamp Factor
(dB) Cable loss
(dB) aOWL Margin
(MHz) Level
(dB) Mary Hu Remark Limits Emission
(dBV/m)(dB V/m) 58.37 36.58 58.28 40.97 56.47 38.99 59.09 39.29 44.30 44.30 44.60 44.60 44.30 44.30 44.52 44.52 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 Antenna Factor dB/m Low Channel (2402 MHz)(GFSK)--Above 1G 35.59 35.59 36.27 36.27 35.55 35.55 36.27 36.27 Mid Channel (2441 MHz)(GFSK)--Above 1G 35.66 35.66 36.50 36.50 35.66 35.66 36.50 36.50 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 44.20 44.20 44.43 44.43 44.20 44.20 44.43 44.43 50.26 35.16 49.26 35.14 53.49 38.36 55.68 39.34 High Channel (2480 MHz)(GFSK)-- Above 1G 35.52 35.52 36.53 36.53 35.52 35.52 36.53 36.53 44.21 44.21 44.60 44.60 44.21 44.21 44.60 44.60 50.49 34.04 51.26 35.33 55.47 39.02 53.59 38.56 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00
-15.63
-17.42
-15.72
-13.03
-17.53
-15.01
-14.91
-14.71
-23.74
-18.84
-24.74
-18.86
-20.51
-15.64
-18.32
-14.66
-23.51
-19.96
-22.74
-18.67
-18.53
-14.98
-20.41
-15.44 4803.038 4803.038 7205.503 7205.503 4803.956 4803.956 7206.030 7206.030 4882.584 4882.584 7322.711 7322.711 4881.563 4881.563 7323.875 7323.875 61.87 40.08 60.13 42.82 60.01 42.53 60.86 41.06 61.86 42.46 59.77 42.68 61.31 42.65 62.18 42.85 5.21 5.21 6.48 6.48 5.21 5.21 6.48 6.48 5.21 5.21 7.10 7.10 5.21 5.21 7.10 7.10 4960.199 4960.199 7439.602 7439.602 4960.562 4960.562 7439.988 7439.988 60.95 40.11 60.82 42.39 61.23 41.03 60.63 42.66 5.21 5.21 7.10 7.10 5.21 5.21 7.10 7.10 Note:
(1) Emission Level= Antenna Factor + Cable Loss + Read Level - Preamp Factor
(2)All other emissions more than 20dB below the limit. Comment Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Version.1.2 Page 24 of 48 Report No.: S19071205002001 n Spurious Emission in Restricted Band 2310-2390MHz and 2483.5-2500MHz EUT:
Temperature:
Test Mode:
All the modulation modes have been tested, and the worst result was report as below:
Frequenc aOWL Bluetooth Speaker 20 Mode2/ Mode4 Model No.:
Relative Humidity:
Test By:
Emission aOWL 48%
Mary Hu Meter Reading
(dBV) Cable Loss
(dB) Antenna Factor dB/m Preamp Factor
(dB)
(dBV/m)(dB V/m) 1Mbps(GFSK)-hopping Limits Detector Margin
(dB) 43.80 43.80 43.80 43.80 43.80 43.80 43.80 43.80 44.00 44.00 44.00 44.00 43.80 43.80 43.80 43.80 43.80 43.80 43.80 43.80 44.00 44.00 44.00 44.00 Level 48.85 28.82 46.88 27.39 48.72 27.96 47.31 27.78 48.31 28.15 48.98 27.34 48.76 26.62 48.76 27.04 48.62 28.15 48.80 26.30 49.78 29.58 48.65 27.36 1Mbps(GFSK)- Non-hopping y
(MHz) 2343.70 2343.70 2343.70 2343.70 2390.00 2390.00 2390.00 2390.00 2483.50 2483.50 2483.50 2483.50 2343.70 2343.70 2343.70 2343.70 2390.00 2390.00 2390.00 2390.00 2483.50 2483.50 2483.50 2483.50 61.88 41.85 59.91 40.42 62.17 41.41 60.76 41.23 61.03 40.87 61.70 40.06 2.97 2.97 2.97 2.97 3.14 3.14 3.14 3.14 3.58 3.58 3.58 3.58 61.79 39.65 61.79 40.07 62.07 41.60 62.25 39.75 62.50 42.30 61.37 40.08 2.97 2.97 2.97 2.97 3.14 3.14 3.14 3.14 3.58 3.58 3.58 3.58 27.80 27.80 27.80 27.80 27.21 27.21 27.21 27.21 27.70 27.70 27.70 27.70 27.80 27.80 27.80 27.80 27.21 27.21 27.21 27.21 27.70 27.70 27.70 27.70 Note: (1) All other emissions more than 20dB below the limit. Type Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Comment Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Vertical Vertical Horizontal Horizontal Horizontal Horizontal Vertical Vertical Vertical Vertical Horizontal Horizontal Vertical Vertical Horizontal Horizontal 74 54 74 54 74 54 74 54 74 54 74 54 74 54 74 54 74 54 74 54 74 54 74 54
-25.15
-25.18
-27.12
-26.61
-25.28
-26.04
-26.69
-26.22
-25.69
-25.85
-25.02
-26.66
-25.24
-27.38
-25.24
-26.96
-25.38
-25.85
-25.20
-27.70
-24.22
-24.42
-25.35
-26.64 Version.1.2 Page 25 of 48 Report No.: S19071205002001 n Spurious Emission in Restricted Band 3260MHz-18000MHz EUT:
Temperature:
Test Mode:
All the modulation modes have been tested, and the worst result was report as below:
aOWL Bluetooth Speaker 20 Mode2/ Mode4 Model No.:
Relative Humidity:
Test By:
aOWL 48%
Mary Hu Emission Antenn Frequenc Preamp Factor
(dB) Readin g Level
(dBV) Cable Loss
(dB) a y dB/m
(MHz) Level
(dB V/m) 50.82 40.05 48.63 38.99 50.60 38.71 49.41 39.22 51.10 41.53 52.57 40.99 Note: (1) All other emissions more than 20dB below the limit. 3260 3260 3260 3260 3332 3332 3332 3332 17797 17797 17788 17788 44.70 44.70 44.70 44.70 44.40 44.40 44.40 44.40 43.50 43.50 44.60 44.60 4.04 4.04 4.04 4.04 4.26 4.26 4.26 4.26 10.99 10.99 11.81 11.81 61.91 51.14 59.72 50.08 60.87 48.98 59.68 49.49 39.66 30.09 41.67 30.09 29.57 29.57 29.57 29.57 29.87 29.87 29.87 29.87 43.95 43.95 43.69 43.69 r
(dB) Type LimitsMargin Detecto
(dB V/m) 74 54 74 54 74 54 74 54 74 54 74 54
-23.18
-13.95
-25.37
-15.01
-23.40
-15.29
-24.59
-14.78
-22.90
-12.47
-21.43
-13.01 Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV Comment Vertical Vertical Horizontal Horizontal Vertical Vertical Horizontal Horizontal Vertical Vertical Horizontal Horizontal Version.1.2 Page 26 of 48 Report No.: S19071205002001 7.3 NUMBER OF HOPPING CHANNEL 7.3.1 Applicable Standard According to FCC Part 15.247(a) (1) (iii) and ANSI C63.10-2013 7.3.2 Conformance Limit Frequency hopping systems in the 2400-2483.5MHz band shall use at least 15 channels. 7.3.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.3.4 Test Setup Please refer to Section 6.1 of this test report. 7.3.5 Test Procedure The testing follows ANSI C63.10-2013 clause 7.8.3 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:
Span = the frequency band of operation RBW: To identify clearly the individual channels, set the RBW to less than 30% of the channel spacing or the 20 dB bandwidth, whichever is smaller. VBW RBW Sweep = auto Detector function = peak Trace = max hold 7.3.6 Test Results aOWL Bluetooth Speaker 20 Mode 5(1Mbps) Model No.:
Relative Humidity:
Test By:
aOWL 48%
Mary Hu Number of Hopping Adaptive Frequency hopping
(Channel) 20 limit 15 Verdict Pass EUT:
Temperature:
Test Mode:
(Channel) 79 Version.1.2 Page 27 of 48 Number of Hopping Channel Plot Report No.: S19071205002001 Version.1.2 Page 28 of 48 Report No.: S19071205002001 7.4 HOPPING CHANNEL SEPARATION MEASUREMENT 7.4.1 Applicable Standard According to FCC Part 15.247(a) (1) and ANSI C63.10-2013 7.4.2 Conformance Limit Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5MHz band shall have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20dB bandwidth of the hopping channel, whichever is greater. 7.4.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.4.4 Test Setup Please refer to Section 6.1 of this test report. 7.4.5 Test Procedure The testing follows ANSI C63.10-2013 clause 7.8.2 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Use the following spectrum analyzer settings:
Span = Measurement Bandwidth or Channel Separation RBW: Start with the RBW set to approximately 3% of the channel spacing; adjust as necessary to best identify the center of each individual channel. VBW RBW Sweep = auto Detector function = peak Trace = max hold Version.1.2 Page 29 of 48 Report No.: S19071205002001 7.4.6 Test Results EUT:
Temperature:
Test Mode:
Modulation Mode GFSK
/4-DQPSK aOWL Bluetooth Speaker 20 Mode2/Mode3/Mode4 Channel Number Channel Frequency
(MHz) 0 39 78 0 39 78 2402 2441 2480 2402 2441 2480 Measured Channel Separation
(MHz) 1.00 1.00 1.00 1.00 1.00 1.00 aOWL Model No.:
Relative Humidity: 48%
Test By:
Mary Hu Limit
(kHz)
>614.3
>608.3
>613.8
>816.7
>836.0
>815.3 2/3 of 20dB BW 2/3 of 20dB BW 2/3 of 20dB BW 2/3 of 20dB BW 2/3 of 20dB BW 2/3 of 20dB BW Verdict PASS PASS PASS PASS PASS PASS Version.1.2 Page 30 of 48 Report No.: S19071205002001 Test Plot
(1Mbps) Channel Separation plot on channel 00-01
(2Mbps) Channel Separation plot on channel 00-01
(1Mbps) Channel Separation plot on channel 39-40
(2Mbps) Channel Separation plot on channel 39-40
(1Mbps) Channel Separation plot on channel 77-78
(2Mbps) Channel Separation plot on channel 77-78 Version.1.2 Page 31 of 48 Report No.: S19071205002001 7.5 AVERAGE TIME OF OCCUPANCY (DWELL TIME) 7.5.1 Applicable Standard According to FCC Part 15.247(a) (1) (iii) and ANSI C63.10-2013 7.5.2 Conformance Limit The average time of occupancy on any channel shall not be greater than 0.4s within a period of 0.4s multiplied by the number of hopping channels employed. 7.5.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.5.4 Test Setup Please refer to Section 6.1 of this test report. 7.5.5 Test Procedure The testing follows ANSI C63.10-2013 clause 7.8.4 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:
Span = zero span, centered on a hopping channel RBW 1MHz VBW RBW Sweep = as necessary to capture the entire dwell time per hopping channel Detector function = peak Trace = max hold Measure the maximum time duration of one single pulse. Set the EUT for DH5, DH3 and DH1 packet transmitting. Measure the maximum time duration of one single pulse. Version.1.2 Page 32 of 48 Report No.: S19071205002001 aOWL Bluetooth Speaker 20 Mode2/Mode3/Mode4 aOWL Model No.:
Relative Humidity: 48%
Test By:
Mary Hu 7.5.6 Test Results EUT:
Temperature:
Test Mode:
Modulatio n Mode Channel Number Packet type Mode dwell time
(ms) Limit Verdict 39 39 39 39 39 39 39 39 39 39 DH1 DH3 DH5 2DH1 2DH3 GFSK
/4-
DQPSK Normal AFH Normal AFH Normal AFH Normal AFH Normal AFH Hops Over Occupanc y Time
(ms) 320 160 160 80 106.67 53.33 320 160 160 80 Pulse width
(ms) 0.432 0.432 1.68 1.68 2.928 2.928 0.456 0.456 1.696 1.696 138.240 69.120 268.800 134.400 312.330 156.150 145.920 72.960 271.360 135.680
(ms)
<400
<400
<400
<400
<400
<400
<400
<400
<400
<400 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Note:
A Period Time = (channel number)*0.4 DH1 Dwell time: Reading * (1600/2)*31.6/ (channel number) DH3 Dwell time: Reading * (1600/4)*31.6/ (channel number) DH5 Dwell time: Reading * (1600/6)*31.6/ (channel number) For Example:
1. In normal mode, hopping rate is 1600 hops/s with 6 slots in 79 hopping channels. With channel hopping rate (1600 / 6 / 79) in Occupancy Time Limit (0.4 x 79) (s), Hops over Occupancy Time comes to (1600 / 6 / 79) x (0.4 x 79) = 106.67 hops. 2. In AFH mode, hopping rate is 800 hops/s with 6 slots in 20 hopping channels. With channel hopping rate (800 / 6 / 20) in Occupancy Time Limit (0.4 x 20) (s), Hops over Occupancy Time comes to (800 / 6 / 20) x (0.4 x 20) = 53.33 hops. 3. Dwell Time(s) = Hops over Occupancy Time (hops) x Package Transfer Time Version.1.2 Page 33 of 48 Report No.: S19071205002001 Package Transfer Time Plot CH39-DH1 Package Transfer Time Plot CH39-2DH1 Test Plot Package Transfer Time Plot CH39-DH3 Package Transfer Time Plot CH39-DH5 Package Transfer Time Plot CH39-2DH3 Package Transfer Time Plot CH39-2DH5 Version.1.2 Page 34 of 48 Report No.: S19071205002001 7.6 20DB BANDWIDTH TEST 7.6.1 Applicable Standard According to FCC Part 15.247(a) (1) and ANSI C63.10-2013 7.6.2 Conformance Limit No limit requirement. 7.6.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.6.4 Test Setup Please refer to Section 6.1 of this test report. 7.6.5 Test Procedure The testing follows ANSI C63.10-2013 clause 6.9.2 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Use the following spectrum analyzer settings:
Span = approximately 2 to 3 times the 20 dB bandwidth, centered on a hopping channel RBW 1% of the 20 dB bandwidth VBW RBW Sweep = auto Detector function = peak Trace = max hold Version.1.2 Page 35 of 48 Report No.: S19071205002001 aOWL Bluetooth Speaker 20 Mode2/Mode3/Mode4 Model No.:
Relative Humidity:
Test By:
aOWL 48%
Mary Hu Frequency Measured Bandwidth (KHz)
(MHz) 2402 2441 2480 2402 2441 2480 1Mbps 921.5 912.4 920.7 2Mbps 1225 1254 1223 Limit
(kHz) N/A N/A N/A N/A N/A N/A Verdict PASS PASS PASS PASS PASS PASS 7.6.6 Test Results EUT:
Temperature:
Test Mode:
Test Channel 0 39 78 0 39 78 Note: N/A (Not Applicable) Version.1.2 Page 36 of 48 Report No.: S19071205002001 20dB Bandwidth plot on channel 00 (1Mbps) 20dB Bandwidth plot on channel 00 (2Mbps) Test Plot 20dB Bandwidth plot on channel 39 (1Mbps) 20dB Bandwidth plot on channel 78 (1Mbps) 20dB Bandwidth plot on channel 39 (2Mbps) 20dB Bandwidth plot on channel 78 (2Mbps) Version.1.2 Page 37 of 48 Report No.: S19071205002001 7.7 PEAK OUTPUT POWER 7.7.1 Applicable Standard According to FCC Part 15.247(b) (1) and ANSI C63.10-2013 7.7.2 Conformance Limit The maximum peak conducted output power of the intentional radiator shall not exceed the following: (1) For frequency hopping systems operating in the 2400-2483.5 MHz band employing at least 75 non-overlapping hopping channels, and all frequency hopping systems in the 5725-5850 MHz band: 1 watt. For all other frequency hopping systems in the 2400-2483.5 MHz band 0.125 watts. 7.7.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.7.4 Test Setup Please refer to Section 6.1 of this test report. 7.7.5 Test Procedure The testing follows ANSI C63.10-2013 clause 7.8.5. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Use the following spectrum analyzer settings:
Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel RBW the 20 dB bandwidth of the emission being measured VBW RBW Sweep = auto Detector function = peak Trace = max hold Version.1.2 Page 38 of 48 Report No.: S19071205002001 aOWL Bluetooth Speaker 20 Mode2/Mode3/Mode4 aOWL Model No.:
Relative Humidity: 48%
Test By:
Mary Hu 7.7.6 Test Results EUT:
Temperature:
Test Mode:
LIMIT
(dBm) 20.97 20.97 20.97 20.97 20.97 20.97 Verdict PASS PASS PASS PASS PASS PASS Test Channel Frequenc y
(MHz) Power Setting Peak Output Power
(dBm) 1Mbps 0 39 78 0 39 78 2402 2441 2480 2402 2441 2480 Default Default Default 2Mbps Default Default Default
-3.76
-3.53
-3.97
-2.69
-2.47
-2.88 Version.1.2 Page 39 of 48 Report No.: S19071205002001 Test Plot Peak output Power plot on channel 00 (1Mbps) Peak output Power plot on channel 00 (2Mbps) Peak output Power plot on channel 39 (1Mbps) Peak output Power plot on channel 39 (2Mbps) Peak output Power plot on channel 78 (1Mbps) Peak output Power plot on channel 78 (2Mbps) Version.1.2 Page 40 of 48 Report No.: S19071205002001 7.8 CONDUCTED BAND EDGE MEASUREMENT 7.8.1 Applicable Standard According to FCC Part 15.247(d) and ANSI C63.10-2013 7.8.2 Conformance Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c)). 7.8.3 Measuring Instruments 15.209(a) is not required. In addition, radiated The Measuring equipment is listed in the section 6.3 of this test report. 7.8.4 Test Setup Please refer to Section 6.1 of this test report. 7.8.5 Test Procedure The testing follows ANSI C63.10-2013 clause 7.8.6. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT must have its hopping function enabled. Use the following spectrum analyzer settings:
Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel RBW = 100 KHz VBW = 300 KHz Band edge emissions must be at least 20 dB down from the highest emission level within the authorized band as measured with a 100 kHz RBW. The attenuation shall be 30 dB instead of 20 dB when RMS conducted output power procedure is used. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. Repeat above procedures until all measured frequencies were complete. Version.1.2 Page 41 of 48 Report No.: S19071205002001 7.8.6 Test Results EUT:
Temperature:
Test Mode:
aOWL Bluetooth Speaker 20 Mode2 /Mode4/ Mode 5 aOWL Model No.:
Relative Humidity: 48%
Test By:
Mary Hu GFSK: Band Edge-Low Channel GFSK: Band Edge-High Channel Test Plot GFSK: Band Edge-Low Channel (Hopping Mode) GFSK: Band Edge-High Channel (Hopping Mode) Version.1.2 Page 42 of 48 Report No.: S19071205002001
/4-DQPSK: Band Edge-Low Channel
/4-DQPSK: Band Edge-High Channel Test Plot
/4-DQPSK: Band Edge-Low Channel
(Hopping Mode)
/4-DQPSK: Band Edge-High Channel
(Hopping Mode) Version.1.2 Page 43 of 48 Report No.: S19071205002001 7.9 SPURIOUS RF CONDUCTED EMISSION 7.9.1 Applicable Standard According to FCC Part 15.247(d) and ANSI C63.10-2013. 7.9.2 Conformance Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c)). 7.9.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.9.4 Test Setup Please refer to Section 6.1 of this test report. 7.9.5 Test Procedure Establish an emission level by using the following procedure:
a) Set the center frequency and span to encompass frequency range to be measured. b) Set the RBW = 100 kHz. c) Set the VBW [3 RBW]. d) Detector = peak. e) Sweep time = auto couple. f) Trace mode = max hold. g) Allow trace to fully stabilize. h) Use the peak marker function to determine the maximum amplitude level. Then the limit shall be attenuated by at least 20 dB relative to the maximum amplitude level in 100 kHz. 7.9.6 Test Results Remark: The measurement frequency range is from 9 kHz to the 10th harmonic of the fundamental frequency. The lowest, middle and highest channels are tested to verify the spurious emissions and bandege measurement data. The worst mode is/4-DQPSK mode, and the report only show the worst mode data. Version.1.2 Page 44 of 48 Report No.: S19071205002001
/4-DQPSK on channel 00
/4-DQPSK on channel 00 Test Plot
/4-DQPSK on channel 00
/4-DQPSK on channel 00 Version.1.2 Page 45 of 48 Report No.: S19071205002001
/4-DQPSK on channel 39
/4-DQPSK on channel 39 Test Plot
/4-DQPSK on channel 39
/4-DQPSK on channel 39 Version.1.2 Page 46 of 48 Report No.: S19071205002001
/4-DQPSK on channel 79
/4-DQPSK on channel 79 Test Plot
/4-DQPSK on channel 79
/4-DQPSK on channel 79 Version.1.2 Page 47 of 48 Report No.: S19071205002001 7.10 ANTENNA APPLICATION 7.10.1 Antenna Requirement 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible partyshall be used with the device. 7.10.2 Result The EUT antenna is permanent attached PCB antenna (Gain: 2 dBi). It comply with the standard requirement. END OF REPORT Version.1.2 Page 48 of 48
| 1 | models declaration letter. | Cover Letter(s) | 135.53 KiB | August 07 2019 |
KREAFUNK APS Models Declaration Letter We Company: KREAFUNK APS Address: Mindet 6D, 8000 Aarhus C, Denmark Product: aOWL Bluetooth Speaker Brand: Kreafunk Model Name: aOWL,Kfla01,Kfla02,Kfla03,Kfla04 All models are the same circuit and RF module, except the model name and appearance. Sincerely Name:
Signature Title:
Date:
Ruben Fog-Fredsgaard General Manager 2019-07-15
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-07 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2019-08-07
|
||||
| 1 | Applicant's complete, legal business name |
KREAFUNK ApS
|
||||
| 1 | FCC Registration Number (FRN) |
0023834963
|
||||
| 1 | Physical Address |
Mindet 6D
|
||||
| 1 |
Aarhus C, N/A 8000
|
|||||
| 1 |
Denmark
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
2ACVC
|
||||
| 1 | Equipment Product Code |
AOWL2
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
R**** F****
|
||||
| 1 | Title |
General Manager
|
||||
| 1 | Telephone Number |
00452********
|
||||
| 1 | Fax Number |
00452********
|
||||
| 1 |
i******@kreafunk.dk
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
KREAFUNK APS
|
||||
| 1 | Physical Address |
Denmark
|
||||
| 1 |
i******@kreafunk.dk
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/03/2020 | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | aOWL Bluetooth Speaker | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output power listed is conducted power. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Shenzhen NTEK Testing Technology Co., Ltd.
|
||||
| 1 | Name |
A**** L******
|
||||
| 1 | Telephone Number |
+86-7********
|
||||
| 1 |
c******@ntek.org.cn
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0005660 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC