FCC ID: 2AU9Q-CTREMOTER CT remoter

CAMPER TROLLEY(EN) CT Remoter Technical Data Product name Product type Remote control battery Safety function Signal Frequency Signal Power FCC ID CT remoter Remoter control 2 x AA 1.5 Volt 3 min. Auto shut-off. 2476M Hz

-20~4dbm 2AU9Q-CTREMOTER FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on the user is encouraged to try to correct the interference by one or more of the following measures:

connected.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. Activating and Pairing the Camper Trolleywith the remote control The Camper Trolley comes pre-paired with the remote control.

Turn on the Camper Trolley by simply pressing the Start/Stop buttonfor maximum 1-2 seconds. Turn on the remote control by pushing the forward button () once. The Camper Trolley is now ready to use. IMPORTANT Re-pairing the Camper Trolley turn on. 1. Turn on the Remote Control by pushing the Forward button () once. The green light on the Remote Control will 2. Turn on the Camper Trolley by clicking the Start/Stop button. The green light on the Camper Trolley will turn on. 3. Now simultaneously press and hold the Turn Right button () on the Remote Control and press and hold the Start/Stop button on the Camper Trolley, both LED lights start to blink for 8 seconds, after which the LED lights will light constantly. Now the Camper Trolley and Remote Control have been re-paired and are ready to use. If this pairing procedure is unsuccessful, the Remote Control will turn off automatically in around 15 seconds, and the user needs to redo the procedure from step 1. The start/stop button and operating status indicator are located on the front of the Camper

(The diode lighting can be difficult to see in Trolley strong sunlight):

The maneuvering buttons on the remote control:

Forward: ();Turn right: () Backward: ();Turn left: () Operating Status Start/Stop Button Battery Indicator The battery indicator shows the Camper Trolleys remaining battery status. If the capacityis too low, the CT may not respond correctly. If the indicator itself weakens, the remote control battery needs to be replaced,otherwise the CT may not respond correctly. Maneuvering the Camper Trolley The Camper Trolley logo on the remote control must always point toward the trolley. Use both hands on the remote control, and hold it horizontally during use. Forward: To move forward, in the same direction as the antenna, hold downforward button ().

- Backward: To move backward/reverse, hold down the back button ().

Turn: To turn, hold down the forward () or backward () button while at the same timeholding down one of the turn buttons of the remote control to turn right () or left (). The Camper Trolley will only turn if you first hold the forward or backward button, followed by a turn button. Stop: To stop the Camper Trolley from moving, simply release the forward or backward button. Deactivating the Camper Trolley remoter Turn off the Remote Control LED light by holding down the Right Button (), andthen pressing the left button() at the same time

Kronings ApS Susaavaenget 1, DK-6710 Esbjerg V, Denmark www.kronings.com

CTremoter Powerinput:3V Frequency:2.4GHz SN:XXXXXXXXX FCCID:2AU9QCTREMOTER Productlabelposition

ronings Engineering anufacturing Co., Ltd gent uthorization Company: Kronings Engineering Manufacturing Co., Ltd Address: No. 85, Jinhe Road, Nordic Industrial Park, Zhenhai, Ningbo 315221, Zhejiang, China Product Name: CT remoter Model Number(s): Remoter control Product Description: CT remoter We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name: IATZcremN Title: tea Company: Kronings Engineering Manufacturing Co., Ltd Date: 12/05/2019

< Kronings Engineering Manufacturing Co., Ltd >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019/12/05 Subject; Request for Confidentiality FCC ID: 2AU9Q-CTREMOTER To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram eal =H fore! a B)r-teye-lan

[>JOperational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Al =pats late ma aelieys X<|Test Setup Photos XX]Internal Photos

>x]User Manual

[_]For 45 days, pursuant to Public Notice DA 04-1705. OR

{XJFor 180 days pursuantto KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, . ;

Signature: We i f Name: Ivan NI Title: Manager Email: pm@kronings.com