MY*\KRONOZ:
Ze ENGLISH OVERVIEW TOUCHSCREEN CHARGING TERMINALS WAKE THE DEVICE EXIT A MENU MOVE BETWEEN SCREENS I Double tap the touchscreen. [ Double tap the touchscreen. Swipe left or right, (horizontal mode) I ZeFit* screen turns off when up or down (vertical mode) not use. Pr: ensure ZeFit is responding accurately to your taps, we recommend using your fingertip and not your nail. 4 CHARGING og. Charge ZeFit* for one and a half hours before your first use.
|. Put ZeFit* on the magnetic charging dock. 2. Make sure the pin on the charging dock fit correctly onto the charging terminals on the back of ZeFit*. 3. Plug the small end of the USB cable provided into the chargings dock USB port. 4. Plug the big end of the USB cable into a power source. 5. A battery indicator will fill to indicate charging is in progress. Once ZeFit* is charged, the battery indicator will be full. A full charge takes 1:30 hour. When the battery level gets low, a battery indicator will appear. PAIRING The first time you use ZeFit*, a SET UP message will prompt you to set up your ZeFit* using a mobile device. GET ZeFit* APP To set up your ZeFit* using your mobile device, you first need to get ZeFit*
App. Search for ZeFit* App in the App store or Google Play, download and install the App on your mobile device. CMC run) ANDROID APP ON
@ AppStore | > Google play System Requirements ios Android iOS 8+ devices with Bluetooth 4.0 BLE Select Android 5.0 + devices that support iPhone 4s, 5, 5c, 5s, 6, 6 Plus,7, 7 Plus, iPad Bluetooth 4.0 BLE
(3, 4" and 5gen) iPad Mini, iPod touch (5"gen) Visit www.mykronoz.com to get the latest compatibility list 1. Enable Bluetooth on your mobile device. 2. Open ZeFit* App on your mobile device. Sign up if you are a new member or Log in with your existing account. After entering your personal information, tap Set up. 3. Make sure ZeFit* is nearby and select ZeFit in the list of devices. 4. You will receive a pairing request on your mobile device. Press Pair to accept it. 5. Then, a pairing request will appear on your ZeFit* display. Tap on your ZeFit* to accept the pairing. 6. When ZeFit* is successfully paired, you will be notified on ZeFit*
and on your mobile device's screen. If pairing fails, repeat the same steps. Pairing is a one-time process. If you want to pair ZeFit* with another account, you first need to unpair it from the current one. Open ZeFit* App, go to Settings > Connect ZeFit* > Unpair ZeFit*. Tap Connect ZeFit* to pair a new device. TECH SPECS Size & Circumference 45.5 x18.6x9.3mm Min: 150 mm Max: 222 mm Weight 17g Bluetooth 4.0 BLE Bluetooth operating range Up to 5 meters Battery type Li-ion 80mAh Battery life Up to 5 days Charging time 1.5 hours Memory 7 days of activity Display TFT color touchscreen 1.06 inches/ 160*64 pixels Sensor 3-axis accelerometer Operating temperature -20C to +40C Water resistance IP67 International warranty 1 year REGULATORY NOTICES FCC ID:2AA7D-ZEFT4H USA FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTIONS Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from which the receiver is connected
* Consult the dealer or an experienced radio/TV technician for help. RF exposure statements This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CANADA INDUSTRY CANADA (IC) STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme a la norme CNR d'Industrie Canada applicable aux appareils radio exempts de licence. Son utilisation est soumise aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer dinterfrences et
(2) V'utilisateur de cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un fonctionnement indsirable du dispositif. This device complies with the ISED RSS-102 RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. D claration d exposition aux radiationsCet appareil est conforme aux limites d exposition aux rayonnements Canada tablies su pour un environnement non contr-1 et ne prsente pas de risque dans le cadre d une utilisation conforme 4 celle d crite dans ce manuel. IC:12131A-ZEFT4H