1200M 11AC dual band Gigabit Wireless Router KFR11AC-128R-16F User Manual Version 1.01 KFR11AC-128R-16F Table of Content Chapter 1 Introduction ................................................................................................... 2 1.1 Features .............................................................................................................. 2 1.2 System Requirement .......................................................................................... 3 1.3 Package Contents ............................................................................................... 3 Chapter 2 Hardware Installation ................................................................................... 4 2.1 Led indicators ...................................................................................................... 4 2.2 Back Rear Panel ................................................................................................. 4 2.3 Typical install ....................................................................................................... 5 Chapter 3 Quick Installation Guide ............................................................................... 7 3.1 Set the Network Configurations .......................................................................... 7 3.2 Getting Started .................................................................................................... 9 Chapter 4 Status ........................................................................................................... 13 4.1 Status ................................................................................................................ 13 4.2 Statistics............................................................................................................ 14 4.3 Log .................................................................................................................... 14 Appendix: Technical Specifications ........................................................................... 16 FCC STATEMENT ......................................................................................................... 17 1 KFR11AC-128R-16F Chapter 1 Introduction Congratulations on your purchase of this outstanding 11ac Dual-Band Wireless Gigabit Router. The Wireless Router using 2.4G and 5G dual-band concurrent technology, support latest 802.11ac standards, backward compatibility IEEE802.11 a/b/g/n, 2.4GHz and 5GHz wireless transmission rate up to 1167Mbps when concurrent operation, Integrated router, Wi-Fi access point, 4 ports gigabit switch and fire wall functions in one. Provide convenient and comprehensive network management functions, supports URL filtering, MAC address filtering and the QoS bandwidth control function, can effectively allocate the client's download rate. Supports wireless data encryption, and can guarantee the security of data transmission in wireless network. 1.1 Features Provides a 10/100/1000M WAN interface, can be connected to xDSL modem, Cable modem and Ethernet. Provides four 10/100/1000M LAN interface, can be connected to various Ethernet device. 2.4G and 5G concurrent working wireless transmission rate up to 1167Mbps. Supports the WPS one key encryption, easy to implementing network encrypted connection. Supports 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, etc. encryption and security mechanism. Built-in Network Address Translation (NAT) supports virtual server, special application and DMZ host. Built-in DHCP server, and also supports static address allocation. Supports the VPN pass - through, can build a VPN client. Built-in firewall functions, supports domain and MAC address filtering. Supports QoS bandwidth control function, can effectively allocate the client's download rate. Supports for dynamic DNS function, can provide domain name service for dynamic IP address. Built-in static routing function, can according to need to build special network topology. Supports access control based on MAC address, can effectively to control the Intranet user Internet access permissions. Supports remote Web management and software upgrades. 2 KFR11AC-128R-16F 1.2 System Requirement An Ethernet-Based Cable or xDSL modem An Ethernet Card on PC TCP/IP network protocol for each PC RJ45 Twisted-pair Microsoft IE (or Firefox or Netscape) 1.3 Package Contents Please unpack the box and check the following items:
One 11ac Dual-Band Wireless Gigabit Route One Power Adapter One User Manual 3 KFR11AC-128R-16F Chapter 2 Hardware Installation 2.1 Led indicators The top panel contains LED indicators that show the status of the unit. Name Status Indication Power WAN LAN(1-4) 2.4GHz 5GHz SYS/WPS Off On Off On Power is off. Power is on. There is no device linked to the corresponding port. There is a device linked to the corresponding port but there is no activity. Flashing There is an active device linked to the corresponding port. Off The wireless function is disabled. Flashing The wireless function is enabled. The Router is working on 2.4GHz radio band. Off The wireless function is disabled. Flashing Slow Flashing The wireless function is enabled. The Router is working on 5GHz radio band. The Router is working properly. Fast Flashing the LED flashes fast about two minutes during WPS working. 2.2 Back Rear Panel The following parts are located on the rear panel. 4 KFR11AC-128R-16F WAN: 10/100Mbps RJ45 port. The WAN port is where you will connect Cable/xDSL Modem or other LAN. LAN (1,2,3,4): These four LAN ports are where you will connect networked devices, such as PCs, print servers, remote hard drives, and anything else you want to put on your network. If you connect this product with the Hub (or Switchboard) correctly, the Routers corresponding LED and the Hubs (or the Switchboards) must be illuminates. WPS: With the Router powered on, press the button about 1 second, it is WPS function and the WPS LED will flash two minutes. RESET: With the Router powered on, use a pin to press and hold the button about 7 seconds, the Router will reset to default setting. ON/OFF: The switch for the power. POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this Router. Wireless antenna: To receive and transmit the wireless data. 2.3 Typical install Before installing the Router, make sure your PC is connected to the Internet through the broadband service successfully. If there is any problem, please contact your ISP. After that, please install the Router according to the following steps. Dont forget to pull out the power plug and keep your hands dry. 1. Make sure all devices, including your PCs, modem, and Router, are powered down. 2. Using an Ethernet network cable, connect the LAN or Ethernet network port of the cable or DSL modem to the Routers WAN port. 3. Power on the cable or DSL modem, and power on the PC you wish to use to configure the Router. 5 KFR11AC-128R-16F 4. Connect the included power adapter to the Router. And connect the other end of the adapter to an electrical outlet. 6 KFR11AC-128R-16F Chapter 3 Quick Installation Guide The chapter mainly presents how to enter the Routers Web page and simple router settings. After you have finished the hardware installation (Please refer to chapter 2), the following steps will assist you to set the network configurations for you computer. 3.1 Set the Network Configurations 1. On your computer desktop right click "My Network Places" and select "Properties". 2. Right click "local Area Network Connection" and select "Properties". 3. Select "Internet Protocol (TCP/IP)" and click "Properties". 7 KFR11AC-128R-16F 4. Select "Obtain an IP address automatically" or select "Use the following IP address(S)". A. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically". Click "OK". B. "Use the following IP address (S)"
IP Address: 192.168.1.XXX: ( XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 DNS Server: You need to input the DNS server address provided by you ISP. Otherwise, you can use the Router's default gateway as the DNS proxy server. Tip: If you are not sure of the DNS server address, we recommend you to select Obtain an IP address automatically (O) and Obtain a DNS server address automatically. 8 KFR11AC-128R-16F Click "OK" to save the configurations. 3.2 Getting Started To access the configuration pages, open a web-browser such as Internet Explorer and enter the IP address of the router
(192.168.1.1). The Default User/Password: admin If successful, you can see the status page. 9 KFR11AC-128R-16F Select Wireless Band You can select Wireless Band. 2.4GHz - You can use the 2.4GHz band to connect to many classic wireless devices like gaming consoles, laptops, DVRs, ect. 5GHz - This band is less crowded and is used for time-sensitive music, video streaming or gaming. Using this band can avoid interference with 2.4GHz networks or noisy devices like cordless phones and microwave ovens. Wireless 5GHz LAN Settings For example, here we configure the basic parameters for 5 GHz wireless network as the following screenshot:
Band: This filed determines the wireless mode which the Router works on. 5GHz (A) - Select if all of your wireless clients are 802.11a. 5GHz (N) - Select if all of your wireless clients are 802.11n. 5GHz (A+N) - Select if you are using both 802.11a and 802.11n wireless clients. 5GHz (AC) - Select if all of your wireless clients are 802.11ac. 5GHz (N+AC) - Select if you are using both 802.11n and 802.11ac wireless clients. 10 KFR11AC-128R-16F 5GHz (A+N+AC) - Select if you are using both 802.11a, 802.11n and 802.11ac wireless clients. Mode: Support AP, Client, WDS and AP+WDS mode. Network Type: This type is only valid in client mode. SSID: Service Set Identifier, it identifies your wireless network. Channel Width: Select the channel width from the drop-down list. ControlSideband: This relates to the channel number used for your wireless network. An upper band represents higher channels and vice versa. Channel Number: Indicates the channel setting for the router. Enable Mac Clone: Enable or disable MAC clone option. (You can use the "Mac Clone"
button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address.) Wireless 5GHz Security Setup Secure your wireless network by turning on the WPA or WEP security feature on the router. This section you can set WEP and WPA-PSK security mode. The following picture shows how to set the WEP security. Key Length: Specify the Length of the key, 64-bit or 128-bit. Key Format: Specify the format of the key, ASCII or hex. Key Setting: Enter the key here, its format is limited by the key format, ASCII or Hex. The following picture shows how to set WPA-PSK security, you can select WPA (TKIP), WPA2 (AES) and Mixed mode. 11 KFR11AC-128R-16F Pre-Shared Key Format: Specify the format of the key, passphrase or hex. Pre-Shared Key: Enter the key here, its format is limited by the key format. Click Next to set the 2.4GHz wireless network by the same method, and then click
"Finish" button to complete the setting. Through the wizard setup, you can complete the basic functions of a router settings to achieve Internet access. If you need more advanced setting of the router, please refer to the following chapters. 12 KFR11AC-128R-16F Chapter 4 Status There are Click anyone, you will see the following status. three submenus under the Status menu: Status, Statistics, Log. 4.1 Status The System Status provides you with a snapshot of your Routers current connections and settings. The System Information section provides you with the routers firmware version and build. This is used to help our support department determine what firmware version your device is running. The Current Date / Time is the setting for the system clock. The Wireless Configuration shows the details of the 5.0GHz and 2.4GHz wireless networks. The TCP/IP Configuration displays the current configurations for local network IP address and DHCP server settings. The WAN Configuration displays the information from your Internet Provider. If for some reason your Internet connection stops working, you may try running through the Smart Setup Wizard again. 13 KFR11AC-128R-16F 4.2 Statistics This page shows the packet counters for transmission and reception regarding to wireless and Ethernet networks. The Wireless 1/2 LAN connection statistics shows all data activity for both the 5.0GHz and 2.4GHz wireless networks separately. The Ethernet LAN connection statistics shows all data activity for all users physically connected to the wired ports on the Router. The Ethernet WAN connection statistics shows the data activity for all upload and download data over your Internet connection. 4.3 Log The System Log is useful for viewing the activity and history of your Router. The System Log is also used by Amped Wireless technicians to help troubleshoot your router when needed. It is recommended that you enable logs in the event that troubleshooting is required. Click the Refresh to update the log. Click Clear to clear all shown information. 14 KFR11AC-128R-16F Enable Log: Click this box to enable Log. 15 KFR11AC-128R-16F Appendix: Technical Specifications Standards Interface Type Radio Data Rate Frequency range Antennas LEDs Power adapter Dimensions (W x D x H) Environment IEEE802.11ac, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n LAN: 4 x 10/100/1000M RJ45 Ports(Auto MDI/MDIX) WAN: 1 x 10/100/1000M RJ45 Port(Auto MDI/MDIX) 5GHz: Up to 867Mbps(11ac) 2.4GHz: Up to 300Mbps(11n) 2.4 ~ 2.4835GHz 5.15 ~ 5.25GHz 5.725 ~ 5.85GHz 2 X 2.4G/5G dual-band 5dBi non-removable omnidirectional antennas Power, WPS/System, WAN, LAN(4,3,2,1), WLAN1(2.4G), WLAN2(5G), all the LED color is green. 12V,1A 159 x 127 x 26mm Operating Temperature: 0 ~40 Storage Temperature: -40 ~70 Operating Humidity: 10%~90% non-condensing Storage humidity: 5%~95% non-condensing 16 KFR11AC-128R-16F FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
17 KFR11AC-128R-16F Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
18