Gear S3 frontier/Gear S3 classic High Security Set INSTALLATION MANUAL G000_EN1707_R01 Before installation - Checking the part Please carefully read the installation manual before installation work, and please do the installation following to manual. Please keep the manual for future reference. c b d i f g e h k a Maintenance kit
- Use if the product needs to be reinstalled. Maintenance kit m1 m2 CAUTION -When attaching the double-sided adhesive tape. 1. After removing the protective film from the double-sided adhesive tape, preserve the tape so that it doesn't get dirty. If touching the tape with a hand or foreign materials get on it, its adhesive strength can be significantly deteriorated. 2. The adhesive tape will have full adhesive strength after the 24 hours from its placement. Please do not use the products right after its placement.
How to install the Gear S3 frontier/classic - High Security Set How to Assemble With the Gear S3 strap buckle facing upward, assemble Gear S3 according to the shape of cradle( ) head. a 1 Gear S3 frontier/
Gear S3 classic Gear S3 frontier/
Gear S3 classic Strap buckle b h g f i a d k e c 2 Assemble the security cover( ) in the same way as No. . b 3 b 2 4 g Ensure that the strap buckle faces upward and then assemble it. a CAUTION ASSEMBLING DIRECTION Assemble the security cover( ) to the groove on the cradle( ) head, and then assemble the screw( ) using the triangle wrench( ). g b a f b a f g Assemble the triangle wrench( ) and the hexagonal wrench( ) and fasten the screws (4) firmly again to prevent the screws fixing the security cover from becoming loose easily. If this step is omitted, the screw may become loose easily. i g i f g i g 5 7 Remove the sealing sheet( ) from the protective film and attach it to the assembled screw (4 places) firmly. Attach the sealing sheet ( ) to the screw and press it strongly for more than 30 seconds. h h Fasten the loosened strap using a buckle as shown in the figure. 6 h
PRESS IT EVENLY 30 SECONDS MORE!
Strap Assemble 2 full threaded bolts( ) to the bottom surface of the cradle( ) along the hole on the table. At first, insert the charging & security cable( ) connector into the groove on d the table, and then place 2 full threaded bolts( ) assembled to the bottom surface of the cradle along the hole on the table. c a d 8 k Assemble the washer( ) to the full threaded bolts( ) assembled to the cradle at the bottom surface of the table and fix the cradle firmly to prevent it from moving by rotating the butterfly nut( ). Process all 2 full threaded bolts equally. Connect the charging & security cable( ) connector to the control box and turn on the control box. e c d a
d d
Table hole c How to separate the Gear S3 frontier/classic - High Security Set a Table section After fixing c d k e
c Control box Before separating the charging & security cable connector, make sure to turn off the control box. 1 Turn off the control box, separate the security cable connector( ) and separate the cradle from the table by loosening all butterfly nuts( ) assembled to the cradle( ) at the bottom surface of the table. Remove all 4 sealing sheets( ) attached to the screw, loosen all screws using the triangle wrench( ) and the hexagonal wrench( ) and separate the security cover. 2 e g h a c i a Table section h
c Control box Safety warning k e
c Information Limited warranty i g Warning: To prevent the injury of the user or other people and property damage, the following instructions must be followed.
Do not expose the product to fire or other electric heaters!
- This creates the risk of fire or damage to the product.
Do not disassemble, repair, or remodel the product!
- This creates the risk of injury.
- Please call the service center when repair is necessary.
Do not forcibly bend or pull the wire!
- This creates the risk of damage to the product or injury to the user.
When the wire is disconnected or breaks away, do not touch the wire with bare hands, but always wear protective hand gloves!
- The disconnected part of the wire is sharp, thus, may cause injury.
Do not use the wire for purposes other than as a security alarm device, and do not allow access to children!
- Winding the wire around your neck or body may result in death or serious injury.
Do not touch the wire when there is lightning and thunder!
- This creates the risk of electric shock. The specifications and design of the product may be modified without prior notice to improve product performance. Item Warranty Period Gear S3 frontier/classic High Security Set One year from shipment date. Within the warranty period, Kumoh offers free repair service including delivery charge according to our regulations in the event that any failure or damage occurs during normal use according to the directions in the instruction manual. Manufacturer Information Manufacturer KUMOH Electronics Co.,Ltd Address Tel / Fax E-mail 35, Gilju-ro 444beon-gil, Wonmi-gu, Bucheon-si, Gyeonggi-do (Seoul 14556 Korea) 82-32-662-2000 / 82-32-662-9312 info@kumohec.co.kr MEMO FCC Warning Statement FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body. IC Warning Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage, et (2) L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement This equipment complies with IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body. Cet quipement est conforme aux limites tablies par Industrie Canada en matire d'exposition aux radiofrquences dans un environnement non contrl. Cet appareil et son antenne ne doivent pas tre colocaliss ou fonctionner en conjonction avec tout autre antenne ou metteur. Cet quipement doit tre install et utilis avec une distance minimale de 10cm entre le radiateur et votre corps.