all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 5.45 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 5.45 MiB |
WD48UW4490 CONTENTS Important Safety Instructions Safety Information Preparation What's Included Front View Rear View Installing the Stand Removing the Stand for Wall-Mounting Remote Control Connecting External Devices Customizing TV Settings Initial Setup Navigating the Setup Settings Apps Media Viewing Photos Playing Motion JPG Source Setup System Channel Support Lock Picture Network Audio Parental Control Troubleshooting Maintaining Specification OTT APP Service 2 3 4 4 5 6 7 7 8 9 10 10 11 12 13 13 14 14 15 15 17 17 18 19 20 21 22 24 25 26 27 En 1 IMPORTANT SAFETY INSTRUCTIONS Read these instructions All the safety and operating instructions should be read before this product is operated. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on apparatus. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. This product contains electrical or electronic materials. The presence of these materials may,if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collectedseparately. As a consumer, you are responsible for ensuring that this product is disposed of properly. This product meets ENERGY STAR guidelines for energy efficiency. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. ENERGY STAR is a registered mark owned by the U.S. government. Keep these instructions The safety and operating instructions should be retained for future reference. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions All operating and use instructions should be followed. Do not use this apparatus near water The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool, and the like. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-
type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Please keep the unit in a well-ventilated environment. En 2 SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. electronic components. To prevent overload, do not share the same power supply socket with too many other Do not place any connecting wires where they may be stepped on or tripped over. Do not place heavy items on any connecting wire, which may damage the wire. Hold the main plug, not the wires, when removing from a socket. During a thunderstorm or when not in using the television for long periods, turn off the power switch on the back of the television. Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools. Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the TV set does not work normally. Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the products warranty. Qualified personnel must only service this apparatus. To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long period, or when the batteries are exhausted. Do not break open or throw exhausted batteries into a fire. For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries. Install only new batteries of the same type in your product. Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak. Do not mix old and new batteries. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. Batteries should be recycled or disposed of as per state and local guidelines. Do not attempt to recharge disposable batteries. Do not short circuit battery terminals. Keep away from children. Physical Safety Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care at least 5cm (2) clearance all around. of the remote control. To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong, the wide blade,or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs. Unplug the apparatus during lightning storms or when unused for long periods. Refer all servicing to a qualified service personnel.Servicing is required if the apparatus does not operate normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way. Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus;
when the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped. Always connect your television to a power outlet with protective ground connection. En 3 PREPARATION What's Included TV Set Remote Control with Batteries TV Stand Four Screws (M4x12) User Manual Quick Connect Guide Warranty Card User Manual Quick Connect Guide Warranty Card En 4 Front View PREPARATION 1. POWER 2. SOURCE 3. MENU Switch the TV between On / Standby mode. Press to select among different input signal sources. Display the main menu. 4. CH /
Press to select a channel. 5. VOL +/-
Press to adjust the volume. 6. POWER Indicator 7. Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. IR (Infrared Receiver) Receive IR signals from the remote control. En 5 PREPARATION Rear View T N E N O P M O C I O D U A 0 0 9 I 3 M D H 0 1 OPTICAL LA N HDMI2 HDMI1 VG A PC AUDI O Connect to a USB storage device to play compatible movie and photo files. 1. Power Cord Connect to AC power outlet. 2. OPTICAL Output Connect a digital sound system to this jack. 3. USB Port 4. LAN 5. HDMI Input 6. VGA Input Network connection port. 7. PC AUDIO Input 8. DTV/TV Input Connect to a computer audio output. 9. Headphone Socket Connect to the Headphones. 10. AUDIO Input Connect to a High-Definition (HD) signal input device. Connect to a computer or other devices with a VGA interface. Connect to the antenna (75 VHF/UHF) socket with the RF coaxial cable. Connect to the AUDIO (L/R) output sockets on external audio devices. 11. COMPOSITE/COMPONENT IN Connect to AV devices with composite/component (Y/Pb/Pr) video and audio output sockets. COMPOSITE VIDEO and COMPONENT(Y/PB/PR) share with AUDIO IN (L/R). En 6 Installing the Stand PREPARATION 1. Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. 2. Fix the Left Connecting Base to the main unit using the 2 provided screws. 3.Fix the Right Connecting Base to the main unit using the 2 provided pcs provided screws. Removing the Stand for Wall-Mounting 1.Lay the TV face down on a flat, cushioned surface to avoid damaging or scratching. 2.Untighten the 4 pcs screws holding the stand assembly and remove them. 3.Attach the wall-mount bracket to the TV using the mounting holes on the back of the TV. Mount this TV according to the instructions included in the wall-mount bracket. WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket. En 7 PREPARATION Remote Control 1.
: Switch the TV between On and Standby mode. 2. MUTE: Mute and restore TV sound. 3. 0~9: Select a program.(ATV/DTV mode) 4.
: Enter multiple program channel number such as 2-1. 9.
: Return to the previous viewing channel. 5. 6. APP: Press to select the desired APP. 7. MENU: Display the main menu. 8. SOURCE: Select among the different input signal sources:TV/HDMI1/HDMI2/HDMI3/USB/
VGA/AV/Component.
: Allows you to navigate the on screen display menus and adjust the system settings to your preference. 10. OK: Confirm the selection. 11. RETURN: Return to previous menu. 12. EXIT: Exit the on screen display menu. 13. TV: Press to turn to TV mode. 14. VOL+/-: Adjust the volume. 15. CH / : Select the channel. 16. DISPLAY: Display the present screen information such as the current channel and input source.
: Stop the playback.
: Skip to the beginning of the previous chapter/track/photo.
: Skip to the beginning of the next chapter/
17. 18. 19. track/photo.
: Reverse playback rapidly.
: Advance playback rapidly. 20. 21. 22. COLOR BUTTONS: Press to access directly to the corresponding function in APP service.
: Start playback or pause. 23. 24. P.MODE: Select picture mode: dynamic/movie/
25. S.MODE: Select sound mode: standard/music/
26. CH.LIST: Display program list. 27. CC: Closed Caption selection: ON/OFF/CC On 28. V-CHIP: Set up parental control. 29. MTS: Switch among different audio channels:
STEREO/MONO/SAP. 30. A S P E C T: S e l e c t t h e a s p e c t r a t i o settings:standard/wide/wide zoom/zoom. 31. AUTO: Press to adjust the picture automatically in VGA source. 32. S L E E P : S e t t h e T V s l e e p t i m e r :
OFF/5/10/180/240 min. user/standard. movie/user. Mute. En 8 CONNECTING EXTERNAL DEVICES En 9 CUSTOMIZING TV SETTINGS Initial Setup Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The first time you turn the TV on, it will go into the Setup Wizard. Press buttons to select your desired mode and press OK to Welcome to the WESTINGHOUSE UHDTV Setup Wizard. Follow this guide to help setup your UHDTV for scanning channels or accessing your external devices for Antenna, Set-top Box, Blu-ray, DVD, Games and other players. Hawaii Alaska OK :Next OK :Next OK :Next Select Your Connection Devices Click here to set Wired or Wireless network. Click here to connect a Game, Blu-ray, DVD or other players. Are you sure you want Home Mode(Energy Saving)?
Click here to scan channels from the antenna or coaxial cable input. OK :Next OK :Next Welcome to the WESTINGHOUSE UHDTV Setup Wizard. Scanning Channel Program DTV RF CH
: 51 Found
: 0 7 5 8 Follow this guide to help setup your UHDTV for scanning channels or accessing your external devices for Antenna, Set-top Box, Blu-ray, DVD, Games and other players. OK :Next Check your antenna or cable connections andtry again Click here to return to Scanning Channel Program. Click here to connect a Game, Blu-ray, DVD or other players. 9 MENU: Skip EXIT :Quit OK :Next OK :Next If channels can not be found, this frame will be displayed automatically. Component TV HDMI1 HDMI1 HDMI1 HDMI2 AV Apps Media Source Setup Home Mode (Energy Saving) is the default as-shipped television and settings. And Home Mode (Energy Saving) is the setting in which the product qualifies for Energy Star. Any changes to default as-shipped television and settings would change the energy consumption. And enabling certain optional features and functionalities may increase energy consumption beyond the limits required for Energy Star Retail Mode : Select Retail Mode if you would like your picture to be brighter. At times this mode may use more energy to operate the Volume/Sound Mode and the Picture Mode. In this setting, the power consumption may possibly exceed the limited requirement of the Energy Star Energy Star is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). Energy Star is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy The SLEEP-MODE Power should be less than 0.5 W. The ON-MODE Power under Home Mode should be less than 70W products and pratices. as applicable. En 10 Navigating the Setup Settings CUSTOMIZING TV SETTINGS Press the MENU button to display the main menu. Use buttons to select Setup menu and then press and select the available menu. buttons to navigate Network Audio Support Channel Audio System Lock Support Channel System Channel Picture Lock Channel Support Network Picture Support Lock Support Lock Audio Network Lock Picture System Audio Picture Network Picture Network Channel System Audio En 11 CUSTOMIZING TV SETTINGS Apps Toon Goggles Press the MENU button on the main unit or on the remote control to display the Apps. Then press to select the desired APP and press OK button to view. Or press the hotkey on the remote control to enter the APP directly. to enter the streaming and use Netflix Toon Goggles AccuWeather YouTube Enjoys TV shows & movies streamed instantly over the Internet. A subscription video on-demand platform that offers animated, fun and educational cartoons, engaging games and songs from all over the world and in many different languages to children. Displays the current weather conditions and the temperature anywhere in the world in centigrade or Fahrenheit. YouTube your way on the best screen in your house. En 12 Media CUSTOMIZING TV SETTINGS Press the MENU button on the main unit or on the remote control, then press to select the to enter the media and use to select Media, and use desired option. NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. Viewing Photos buttons to select Photos and then select the After entering Media, press disk type to enter. Then use
/
buttons to navigate in the picture folder to select the desired photo, then a subscreen will pop up. Press OK button, when appears on the top left, press to display the photo. Note: File format supported: JPEG. En 13 CUSTOMIZING TV SETTINGS Playing Motion JPG After entering Media, press buttons to select Motion JPG and then select buttons to navigate in the motion the disk type to enter. Then use JPG folder to select the desired video, then a subscreen will pop up. Press OK button, when appears on the top left, press to display the video.
/
Note: File format supported: Motion JPG. Source Press the MENU button on the main unit or on the remote control and press to enter source,and use buttons to select the Source menu. Then press buttons to select different input sources among: TV/ HDMI1/ HDMI2/ HDMI3/
USB/ VGA/ AV/ Component and press OK button to confirm. En 14 Setup CUSTOMIZING TV SETTINGS Press the MENU button on the main unit or on the remote control to display the to enter. to select Setup menu and press main interface. Then press Then press to select the desired option. System Wide Zoom Press Press buttons to adjust each options setting. buttons to select System menu and then press OK button to enter. buttons to select the following setting options and then press En 15 CUSTOMIZING TV SETTINGS Menu Language Transparency Zoom Mode Noise Reduction Advanced Select menu language : English, Franais or Espaol. The default on-screen menu language is English. Select to turn On/Off transparency function. Select zoom mode : Standard/Wide/Wide Zoom/Zoom. Note: Different input source, the zoom mode options may differ. Reduce the noise level of the connected device: Off/
Weak/Middle/Strong. Adjust advanced options setting: H-POS, V-POS, Clock, Phase or Auto. (VGA source mode only) CC Mode Basic Selection Closed Caption Advanced Selection OPTION Select CC mode : On, Off or CC on Mute. Basic Selection: CC1, CC2, CC3, CC4, Text1, Text2, Text3, Text4. Advanced Selection: Service1, Service2, Service3, Service4, Service5, and Service6. Options: Mode, Font Style , Font Size, Font Edge Style, Font Edge Color, FG_Color, BG_Color, FG_ Opacity, BG_ Opacity.. Select to turn On/Off the dynamic luminance control. Sleep Timer:Select a period of time after which the TV automatically switches to standby mode:
Off/5/10//180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. Time Zone:Select a Time Zone: Hawaii/ Alaska/ Pacific/
Mountain/ Central/ Eastern/ Atlantic/ Newfoundland. Daylight Saving Time:Select to turn On/Off daylight saving time. Set other settings:
HDMI EDID: select the HDMI version: HDMI 2.0/HDMI 1.4. INlink(HDMI-CEC): set the following settings: INlink Control, Device Power Off, TV Power On, Audio Receiver, INlink Device List, Root Menu. Restore the TV to factory default settings. DLC Time Other Setting Restore Default En 16 Channel COSTOMIZING TV SETTINGS Press Press buttons to adjust each options setting. buttons to select Channel menu and then press OK button to enter. buttons to select the following channel options and then press Select antenna between Air and Cable. Select Auto Scan to search the available Air or Cable channels. Show/Hide the selected channel. Air/Cable Auto Scan Show/Hide Channel Number Display the current channel number. Channel Label Signal Information Display the information of current signal. Display the current channel label. Support USERS MANUAL MANUEL DE LUTILISATEUR MANUAL DEL USUARIO WD48 UW2 490 Press buttons to select Support menu and then press OK button to view the built-in user manual. En 17 CUSTOMIZING TV SETTINGS Lock Press buttons to select Lock menu and then press OK button to enter. Use the 0-9 buttons to input 4-digit password to enter the Lock menu. Press buttons to select the following lock options and then press buttons to adjust each options setting. Note: the default password is 0000. Use 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation. Select to turn On/Off system lock. The following options
(USA, Canada, RRT Setting and RRT Reset) will only be accessible when you turn the system lock on. TV TV RATING: Press OK button to lock or unlock TV rating. Select MPAA rating : N/A,G, PG, PG-13, R, NC-17,or X. Select MPAA rating for English-speaking Canada : E, C, C8+, G, PG, 14+, 18+. Select MPAA rating for Quebec Canada : E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+. MPAA Canada English Canada French Set Rating Region Table. Select to reset the RRT setting. Clear all lock settings. Change Password System Lock USA Canada RRT Setting Reset RRT Clear Lock En 18 Picture COSTOMIZING TV SETTINGS Energy Saving Press Press buttons to adjust each options setting. buttons to select Picture menu and then press OK button to enter. buttons to select the following picture options and then press Picture Mode Blue Screen Brightness Contrast Color Sharpness Tint Color Temp Advanced Setting MEMC Cycle among picture mode: Dynamic/Movie/Energy Saving/User/Standard. Alternative: you may press the P.MODE button to select the picture mode directly. Allow the blue background to turn On/Off during weak or no signal conditions. Increase or decrease the amount of white in the picture.
(For User mode) Adjust the difference between light and dark levels in the pictures. (For User mode) Control the color intensity. (For User mode) Adjust the level of crispness in the edges between light and dark areas of the picture. (For User mode) Adjust the balance between red and green levels. Cycle among color temperatures: Cool/Normal/Warm. Color Space: To adjust the following settings: Color Mode, Color, Hue, Saturation, Brightness and Reset. White Balance: To adjust the settings of white balance. C y c l e a m o n g M o t i o n E s t i m a t e a n d M o t i o n Compensation modes:Middle/High/Off/Low. En 19 CUSTOMIZING TV SETTINGS Network THTF4KOTT-00000000000000000000 000100029265 Press Press buttons to adjust each options setting. buttons to select Network menu and then press OK button to enter. buttons to select the following network options and then press Select two types of network: Wireless Network or Wired Network. Show the network status. Network Settings Network Status Deactivate Netflix Deactivate Netflix and clear the account information. Deactivate Vudu and clear the account information. Deactivate Vudu Electronic Serial Number Netflix ESN Auto Scanning.Please wait... En 20 COSTOMIZING TV SETTINGS Reminder for internet connection:
Below occasions are possible while your internet is connected to enjoy your OTT services. 1.Please check your internet signal strength while internet is connected, signal strength below 50 may result bad connection and non-smooth picture. 2.To enter OTT services, 30 seconds may be required for internet connection. Recommended 10Mb above internet speed Audio Press Press buttons to adjust each options setting. buttons to select Audio menu and then press OK button to enter. buttons to select the following audio options and then press Sound Mode Bass Treble Balance SPDIF Mode Surround Sound Auto Volume Audio Language Allow the selection of an audio-enhancement technique:
Standard/Music/Movie/User. Alternative: you may press the S.MODE button to select the sound mode directly. Control the relative intensity of lower-pitched sounds. (For User mode) Control the relative intensity of higher-pitched sounds. (For User mode) Adjust the relative volume of the speaker in a multiple speaker system. Select the digital audio output mode between RAW/PCM. Turn On/Off to provide an enhanced listening experience. Turn On/Off to automatically control volume levels. Select audio language among: English, French, Spanish En 21 PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV. Parental Control allows the user to define which program rating they consider acceptable for younger more sensitive viewer. It can be preset and turned either on or off by the user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audiences and children blocks should be both programmed into the TV's memory. Separate different viewer ratings are specified for both TV and the motion picture Industry; both rating systems should be used and based on the ages of children. Overview To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children.In addition, you may wish to add additional restrictions from the content block menu, and submenus examples below. Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-PG,TV-14,or TV-MA rated programming.) You may block the auxiliary video source entirely. (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/VIdeo Input Jacks) or remain unblocked, then choose acceptable ratings. Block program "Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes,Violence Scenes or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set Password option, using the numbers keys on the remote control.Save the password, it is the only way to access the Parental Control menu and change rating setting, or turn off Parental Control. You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time. Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources. Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources. You cannot disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time setting specified if power is disconnected. En 22 PARENTAL CONTROL Motion Picture Association of America (MPAA) Rating System G PG PG-13 R NC-17 X No Rating Grade General Audiences Parental Guidance Suggested Parents Strongly Cautioned Restricted No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program. Not for children under 17-contains strong element of sex and/or violence. Not for children under 17-under any circumstances. Contains strong sexual content. Same as NC-17 rating. MPAA did not rate TV Parental Guideline Rating System TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Grade All Children Directed to Older Children General Audience Parental Guidance Suggested Parents Strongly Cautioned Mature Audience Only Meaning Content not offensive to most viewers. Considered suitable for children over 7- may contain fantasy violence scenes. Considered suitable for all audience; children may watch unattended. Suggested unsuitable for younger children-may contain suggestive language, bad language, sex and violence scenes. unsuitable for children under 14 - may contain strong language, bad language, sex, and violence scenes. Adults only- may contain strong language, bad language, sex, and violence scenes. Canadian Rating:
Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+). Canadian French is used in Quebec (G,8 ans+, 13 ans+,16 ans+, 18 ans+) Note: The V-Chlp will automatically block certain categories that are "more restrictive".If you block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category,then all the categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA). En 23 TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond when pressing any buttons The TV may freeze up during use. Disconnect the power cord from the power socket for a few minutes. Reconnect the power cord and try to operate it again as usual. TV cannot be switched on Check that the TV is connected to the power supply. Make sure all connected AV devices are switched off before switching on your TV. The remote control does not work Power is suddenly turned off Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at the TV. Ensure that the batteries are installed with the correct polarity Install new batteries. Check the power of the TV. The power supply maybe
(+ to +, - to -). interrupted. Check if the sleep timer is set. Check whether the Auto Standby is activated. The video function does not work Check whether the TV is switched on. Try another channel. The problem may be caused by the broadcaster. This is normal; the image is muted during the TV startup process. Please contact your service centre if the picture has not appeared after five minutes. Adjust the settings in the PICTURE menu. Try another channel. The problem may be caused by the Check if video cables are connected properly. Check for local interference such as an electrical appliance broadcaster. or power tool. The station or cable channel may be experiencing problems;
Station signal may be weak, reposition the antenna for better tune to another station. reception. Check for sources of possible interference. Check antenna (change the position of the antenna.) Check if the input source is HDMI1/HDMI2/HDMI3. Adjust the Aspect Ratio settings in the SETUP menu or press the ASPECT button on the remote control. No picture & No Sound Picture appears slowly after switching on No or poor color or poor picture Horizontal/Vertical bar or picture shaking Poor reception on some channels Lines or streaks in pictures No pictures when connecting HDMI Pictures appear in wrong ratio En 24 The audio function does not work Press the VOL +/- buttons. Sound muted? Press the MUTE button. Try another channel. The problem may be caused by the broadcaster. Adjust the Balance settings in the AUDIO menu. A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. Check if the input source is HDMI1/HDMI2/HDMI3. Keep the RF coaxial cable away from the other connected cables. Select the SET Password setting in the LOCK menu, then enter the following master password 8899. The master password clears your previous password and allows you to enter a new password. Adjust the resolution, horizontal frequency, or vertical frequency. Use Auto configures or adjust clock, phase, or H/V position. Check the signal cable. Reinstall the PC video card. Picture OK but no sound No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI Audio noise Password Lost password There is a problem in PC mode The signal is out of range
(invalid format) Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen color is unstable or show a single color Maintaining Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. Storage temperatures are 32 to 122F(0 to 50C) Working temperatures are 32 to 95F(0 to 35C) Do not place your TV in direct sunlight or near a heat source En 25 SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) The FCC Wants You to Know 47.6 inch diagonally DLED TFT 60 Hz 3840 x 2160 3840 x 2160 60Hz 3840 x 2160 16:9 1000:1 8 ms 20,000 hours 178 178 400*400 VESA(mm) This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1)Reorient or relocate the receiving antenna; 2)Increase the separation between the equipment and receiver; 3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; 4) Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. En 27 If you want to know about these APP information or get more service. Please refer to following content. OTT APP SERVICE Netflix You can call the following telephone for more help: 866-579-7172 If your matter is regarding customer service, please refer to https://contactus.netflix.com/help for alternative contact information. YouTube You can browse the following website for more help:
https://productforums.google.com/forum/#!categories/youtube/smart-tvs TG You can call the following telephone for more help: 888-874-5411 Pandora AccuWeather You can send E-mail to AccuWeather for more help: CustomerService@AccuWeather.com En 27 CONTENU CONTENTS Consignes de scurit importantes Renseignements sur la scurit Prparation lments compris Vue avant Vue arrire Installation du socle Retrait du socle en vue dun montage mural Tlcommande Connexion des appareils externes Personnalisation des paramtres du tlviseur Configuration initiale Navigation dans les paramtres de configuration Apps Mdias Visualisation de photos Jouer Mouvement JPG Source Option System Prog. Support Verro Image Rseau Audio Contrle parental Dpannage Entretien Caractristiques technique OTT APP Service 2 3 4 4 5 6 7 7 8 9 10 10 11 12 13 13 14 14 15 15 17 17 18 19 20 21 22 24 25 26 27 Fr 1 CONSIGNES DE SCURIT IMPORTANTES Lisez ces consignes Avant dutiliser ce produit, vous devez lire toutes les consignes lies la scurit et au fonctionnement de lappareil. MISE EN GARDE : pour rduire les risques dincendie et de choc lectrique, nexposez pas cet appareil la pluie ou lhumidit. Ne lexposez pas non plus aux gouttements ou aux claboussures. Ne placez pas dobjets remplis de liquide, par exemple un vase, sur le dessus de lappareil. MISE EN GARDE : nexposez pas les piles une chaleur excessive comme celle induite par la lumire du soleil, un feu ou autrement. MISE EN GARDE :la prise secteur sert de dispositif de dsaccouplage; elle doit demeurer facilement accessible. MISE EN GARDE : afin de rduire les risques dlectrocution, retirez pas le couvercle (ou le panneau arrire), car il ny a aucune pice rparable par lutilisateur lintrieur. Confiez les rparations un technicien qualifi. Le symbole reprsentant un clair termin par une flche lintrieur dun triangle quilatral vise avertir lutilisateur du danger de la prsence dunetension dangereuse p r s e n t e p a r des pices non isoles lintrieur de lappareil, ventuellement s u f f i s a n t e p o u r c o n s t i t u e r u n r i s q u e dlectrocution. Le symbole de point dexclamation lintrieur un triangle quilatral, vise informer lutilisateur de la prsence de consignes de fonctionnement et de maintenance importantes dans la documentation qui accompagne lappareil. Cet quipement est un appareil lectrique de classe II ou double isolation. Il a t conu de sorte ne pas ncessiter une connexion de scurit mise la terre. Ce produit contient des composants lectriques ou lectroniques. Sils ne sont pas mis auxrebuts adquatement, ces composants pourraient nuire lenvironnement ou la sant des humains. La prsence de cette tiquette sur le produit signifie quil ne doit pas tre mis aux rebuts en tantque dchet non tri, mais faire lobjet dune collecte slective. Comme consommateur, vous devez vous assurer que ce produit est mis aux rebuts de la bonne manire. Ce produit est conforme aux directives ENERGY STAR pour l'efficacit nergtique. ENERGY STAR et la marque E N E R G Y S TA R s o n t d e s marques amricaines dposes. ENERGY STAR est une marque d p o s e a p p a r t e n a n t a u gouvernement des tats-Unis. Conservez ces consignes Nous vous conseillons de conserver les consignes lies scurit et au fonctionnement de lappareil pour consultation future. Observez toutes les mises en garde Vous devez suivre toutes les consignes lies au fonctionnement et lutilisation de lappareil. Suivez toutes les consignes Vous devez suivre toutes les consignes lies au fonctionnement et lutilisation de lappareil. Nutilisez pas cet appareil prs de leau Lappareil ne doit pas tre utilis prs de leau ou dans un lieu humide, par exemple dans un sous-sol humide ou prs dune piscine et autres. Nettoyez uniquement laide dun chiffon sec. Nobstruez pas les orifices de ventilation. Installez lappareil conformment aux consignes du fabriquant. Ninstallez pas lappareil proximit dune source de chaleur comme un radiateur, une bouche de chaleur, une cuisinire ou dautres appareils qui produisent de la chaleur (y compris les amplificateurs). Ne contournez pas le dispositif de scurit de la fiche polarise ou de la fiche de mise la terre. Une fiche polarise comporte deux lames dont lune est plus large que lautre. Une fiche avec mise la terre comporte deux lames, en plus dune broche de masse. La lame plus large ou la broche de masse vise assurer votre scurit. Si la fiche fournie nest pas compatible avec votre prise, adressez-vous un lectricien pour faire remplacer la prise, qui est probablement dsute. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Placez le cordon dalimentation de sorte quil ne risque pas dtre pitin ou coinc, particulirement au niveau de la fiche et de la prise de courant, ainsi quau point de sortie de lappareil. Nutilisez que les fixations et les accessoires recommands par le fabricant. Utilisez lappareil uniquement avec le chariot de manutention, le support, le trpied ou la table recommand par le fabricant ou vendu avec lappareil. Si vous utilisez un chariot, dplacez- l e avec prcaution afin dviter de le renverser et de vous blesser. Dbranchez lappareil en cas dorage ou lorsquil reste inutilis pendant une priode prolonge. Confiez toute rparation un technicien qualifi. Une rparation est ncessaire si lappareil a t endommag dune manire ou dune autre, par exemple lorsque le cordon dalimentation ou la fiche est endommag, si un liquide a t renvers sur lappareil, ou si des objets sont tombs sur celui-ci, l'appareil a t expos la pluie ou l'humidit, sil fonctionne mal ou sil est tomb.Please keep the unit in a well-ventilated environment. Veuillez installer lappareil un endroit bien ar. Fr 2 RENSEIGNEMENTS SUR LA SCURIT Pour vous assurer du fonctionnement fiable et scuritaire de cet quipement, veuillez lire avec attention les consignes de ce guide dutilisation, et plus particulirement les renseignements ci-dessous portant sur la scurit. Scurit lectrique ltiquette larrire de lappareil. tlviseu. Le tlviseur ne doit tre raccord qu lalimentation principale, une tension correspondant celle indique sur Pour viter les surcharges, ne branchez pas plusieurs autres appareils lectroniques sur la prise utilise pour le Pour viter le pitinement et les chutes, ne placez pas les cbles de connexion des endroits o les gens circulent. Pour viter dendommager les cbles de connexion, ne posez pas dobjets lourds sur ceux-ci. Lors du dsaccouplement de la fiche dune prise, tirez sur la fiche et non sur le cble. En cas dorage ou lorsque le tlviseur reste inutilis pendant une priode prolonge, fermez linterrupteur dalimentation larrire de lappareil. vitez de laisser de leau ou de lhumidit pntrer lintrieur du tlviseur ou de ladaptateur de courant. Nutilisez PAS lappareil dans une pice mouille ou humide, comme une salle de bain ou une cuisine pleine de vapeur, ou prs dune piscine. Dbranchez immdiatement lappareil et demandez laide dun professionnel si la fiche ou le cble est endommag, si du liquide a t renvers sur le tlviseur, si celui-ci est expos accidentellement de leau ou de lhumidit, si un objet quelconque pntre dans les orifices de ventilation par inadvertance ou si le tlviseur ne fonctionne pas normalement. Laissez les couvercles de scurit en place. Il ny a aucune pice rparable par lutilisateur lintrieur. Il est dangereux de tenter par vous-mme de rparer lappareil; en outre, cela pourrait annuler la garantie du produit. Seuls des techniciens qualifis peuvent rparer cet appareil. Pour viter quelles fuient, retirez les piles de la tlcommande si vous ne lutilisez pas pendant une priode prolonge ou si les piles sont puises. Nouvrez pas les piles et ne les jetez pas au feu lorsquelles sont puises. Pour de meilleurs rsultats , utilisez le type AAA ( exemple - alcalines , carbone - zinc , etc. ) batteries. Installez uniquement des piles neuves du mme type dans votre produit. Le dfaut d'insrer les piles en respectant la polarit , comme indiqu dans le compartiment de la batterie , peut raccourcir la dure de vie des batteries ou piles risqueraient de fuir. Ne pas mlanger piles neuves et anciennes. Ne pas mlanger des piles alcalines , standard ( carbone - zinc) ou rechargeables ( nickel-cadmium ) ou ( nickel mtal hydrure ) rechargeables. Les batteries doivent tre recycles ou limines conformment aux lignes directrices nationales et locales. Ne tentez pas de recharger les piles jetables. Ne pas les bornes de la batterie en court-circuit. Gardez loin des enfant. Scurit physique Nobstruez pas les orifices de ventilation sur le panneau arrire. Vous pouvez placer le tlviseur dans un meuble, mais assurez-vous de . laisser un espace de dgagement dau moins 5 cm (2 po) tout autour. Ne tapez sur lcran du tlviseur et ne le secouez pas; vous risqueriez dendommager les circuits lintrieur. Prenez bien soin de la tlcommande. Pour nettoyer le tlviseur, utilisez un chiffon doux sec. Nutilisez pas de solvants, ni de liquides base de ptrole. Ninstallez pas lappareil proximit dune source de chaleur comme un radiateur, une bouche de chaleur, une cuisinire ou dautres appareils .quiproduisent de la chaleur (y compris les amplificateurs). Ne contournez pas le dispositif de scurit de la fiche polarise ou de la fiche de type mise la terre. Une fiche polarise comporte deux lames dont lune est plus large que lautre. Une fiche avec mise la terre comporte deux lames, en plus dune broche de masse. La lame plus large ou la broche de masse vise assurer votre scurit. Si la fiche fournie nest pas compatible avec votre prise, adressez-vous un lectricien pour faire remplacer la prise, qui est probablement dsute. Placez le cordon dalimentation de sorte quil ne risque pas dtre pitin ou coinc, particulirement au niveau de la Confiez toute rparation un technicien qualifi. Une rparation est ncessaire si lappareil fonctionne mal ou sil a t endommag dune manire ou dune autre (y compris le cordon dalimentation ou la fiche). Une rparation est aussi ncessaire lorsquun liquide a t renvers sur lappareil ou que des objets sont tombs sur celui-ci, si lappareil a t expos la pluie ou lhumidit, ou sil est tomb. Raccordez toujours votre tlviseur une prise de courant protge par une connexion de masse. fiche. Fr 3 PRPARATION lments compris Poste de tlvision Tlcommande et piles Socle de tlvision Quatre Vis (M4x12) Manuel dutilisation Guide de Connexion Rapide Garantie Carte Manuel dutilisation Guide de Connexion Rapide Garantie Carte Fr 4 Vue avant PRPARATION 1. MISE SOUS TENSION Pour faire basculer le tlviseur entre les modes Sous tension et Veille. Appuyez sur cette touche pour choisir la source du signal dentre. 2. SOURCE 3. MENU 4. CH /
5. VOL +/-
Afficher le menu principal. Appuyez sur cette touche pour choisir un canal. Appuyez sur cette touche pour rgler le volume. 6. Tmoin de mise sous tension Apparat en bleu lorsque le tlviseur est allum. Apparat en rouge lorsque le tlviseur est en mode veille. IR (Rcepteur infrarouge) Reoit les signaux IR de la tlcommande. 7. Fr 5 PRPARATION Vue arrire T N E N O P M O C I O D U A 0 0 9 I 3 M D H 0 1 OPTICAL LA N HDMI2 HDMI1 VG A PC AUDI O 1. Cordon dalimentation Se branche dans une prise de courant c.a. Pour connecter un systme de son numrique cette prise. 2. OPTIQUE 3. Port USB 4. LAN 5. Entres HDMI 6. Entre VGA Se raccorde un dispositif de stockage USB afin de lire des fichiers de flim et de photos compatibles. Le port de connexion de rseau. Se raccordent un appareil avec signal de sortie haute dfinition (HD). Se raccorde un ordinateur ou dautres appareils dots dune interface VGA. 7. Entre PC AUDIO 8. Entre DTV/TV Se raccorde la sortie audio dun ordinateur. 9. Prise pour couteurs Se raccorde aux couteurs. 10. Entre Audio Se raccorde la prise de lantenne (75 VHF/UHF) laide du cle coaxial RF. Se raccorde la prise AUDIO (L / R) de connecteurs de sortie des appareils audio externes. 11. COMPOSITE/COMPOSANT IN Se raccorde aux appareils AV avec prises de sortie vido et audio pour composite/composants (Y/Pb/
Pr). La vido composite/ composante(Y/PB/PR) partage avec lentre audio (D/G). Fr 6 Installation du socle PRPARATION 1. Couchez le tlviseur face vers le bas sur une surface plate et coussine pour viter de lendommager ou de rayer lcran. 2. Fixer le raccordement Base Gauche l'unit principale l'aide des 2 vis fournies. 3.Fixer le droit Raccordement de base l'unit principale en utilisant les 2 pices fournies vis fournies. Retrait du socle en vue dun montage mural 1.Couchez le tlviseur face vers le bas sur une surface plate et coussine pour viter de lendommager ou de rayer lcran. 2.Desserrez les 4 vis en tenant le socle, puis retirez-les. 3.Fixez le support mural au tlviseur en utilisant les trous de fixation larrire du tlviseur. Installez ce tlviseur en suivant les consignes comprises avec le support mural. MISE EN GARDE : Cet appareil doit tre retenu par un support mural homologu UL. Fr 7 PRPARATION Tlcommande 1. tlviseur. DTV) exemple 2-1. souhaite. lcran.
: Pour basculer le tlviseur entre les modes Sous tension et Veille. 2. MUSE: Pour activer ou dsactiver le son du 3. 0~9: Pour slectionner un canal. (Mode ATV/
4. : Pour entrer plusieurs numros de canal, par
: Pour revenir au canal prcdent. 5. 6. APPS:Appuyez sur pour slectionner l'APPS 7. MENU: Pour afficher le menu daffichage 8. SOURCE: Pour choisir parmi les diffrentes sources du signal dentre. TV/HDMI1/HDMI2/
HDMI3/USB/VGA/AV/Component.
:Vous permet de naviguer dans les menus affichs et de rgler les paramtres du systme en fonction de vos prfrences. 9. 10. OK: Confirme la slection dans les menus affichs. 11. RETURN:Retour au menu prcdent. 12. EXIT: Pour quitter le menu OSD. 13. TV:Appuyez sur pour mettre en mode TV. 14. VOL+/-: Pour rgler le volume. 15. CH / : Pour slectionner un canal. 16. DISPLAY:Afficher les informations de l'cran prsente comme le canal actuel et la source d'entre.
: Arrter la lecture.
: Passer au dbut de la prcdente chapitre /
: Passer au dbut de la prochaine chapitre /
17. 18. 19. piste / photo. piste / photo.
: Inverser rapidement la lecture.
: Avancer rapidement la lecture. 20. 21. 22. COLOR BUTTONS: Appuyez sur pour accder directement la fonction correspondante dans le service APP.
: Lancez la lecture ou mettre en pause. 23. 24. P.MODE: Pour slectionner le mode de limage :
dynamique / film / utilisateur / standard. 25. S.MODE: Pour slectionner le mode audio :
standard/musique/film/utilisateur. 26. CH.LIST: Pour afficher la liste des programmes. 27. CC: slection du sous-titrage : ON/OFF/CC On Mute(ACTIV/DSACTIV/ST activ sur son dsactiv). 28. V-CHIP:Pour configurer le contrle parental. 29. MTS: Pour basculer entre les diffrents canaux audio : STEREO/MONO/SAP. 30. ASPECT: Pour slectionner le format de limage
: standard/wide/wide zoom/zoom. 31. AUTO:Appuyez sur cette touche pour rgler automatiquement limage de la source VGA 32. SLEEP: pour rgler le minuteur de mise en veille du tlviseur : DSACTIV/5/10.../180/240 min. Fr 8 CONNEXION DES APPAREILS EXTERNES Fr 9 PERSONNALISATION DES PARAMTRES DU TLVISEUR initiale Une fois toutes les connexions physiques tablies, branchez le cordon dalimentation dans la prise de courant. cette tape, le tlviseur passera en mode Veille et le tmoin DEL rouge sallumera. Une fois sous ce mode, appuyez sur la touches de lappareil ou de la tlcommande pour allumer le tlviseur. Le tmoin DEL rouge passera au bleu. Appuyez sur les touches pour slectionner le mode dsir, puis appuyez sur OK UHDTV OK:Suivant OK:Suivant OK:Suivant 5 OK:Suivant OK:Suivant DTV 8 51 MEMU:Skip EXIT:Quitter 7 9 5 8 7 9 Sil est impossible de trouver des canaux,cette fentre automatiquement. Option Home Mode (conomie dnergie) constitue la par dfaut de la tlvision au moment de la livraison. Et Home Mode (conomie dnergie) est la par dfaut du tlviseur entrane des changements au niveau de la consommation dnergie. Lactivation de certaines fonctions et fonctionnalits facultatives peut augmenter la consommation dnergie de ce produit au-del des critres requis pour l'appellation ENERGY STAR. pour laquelle le produit est ENERGY STAR. Toute apporte la Retail Mode : Slectionner le mode magasin pour une image plus claire. Ce mode peut parfois consommer plus dnergie pour utiliser le Volume/
Sound Mode (mode volume/son) et le Picture Mode (mode image). Lorsque ce mode est activ, il est possible que la consommation dnergie aille au-del des critres requis pour lappellation ENERGY STAR . Energy Star est un ensemble de directives d'conomie d'nergie mis par les Etats-Unis de l'environnement Protection Agency (EPA). Energy Star est un programme de lAgence de protection de lenvironnement et du ministre de lnergie des tats-Unis visant fournir des directives d'conomie d'nergie et promouvoir les produits et pratiques nergtiquement La consommation dnergie du SLEEP-MODE (mode veille) devrait tre infrieure 0.5 W. La consommation dnergie du ON-MODE (mode marche) du Home Mode (mode domicile) devrait tre infrieure W. 70 Fr 10 PERSONNALISATION DES PARAMTRES DU TLVISEUR Navigation dans les paramtres de configuration Appuyez sur la touche MENU pour afficher le menu principal. Utilisez les boutons slectionner le menu Setup, puis appuyez sur les touches pour naviguer et slectionner le menu disponible. eseau Audio Support Prog
. Audio System erro Support Prog
. Option Option System Prog . I mag e V erro Support Prog . Support R eseau I mag e Verro Option Option Support V erro Audio R eseau Image V erro I mag e System Audio Reseau Option Option mag e R eseau Audio Prog . System Option Fr 11 R V I PERSONNALISATION DES PARAMTRES DU TLVISEUR Apps Toon Goggles Option Appuyez sur la touche MENU de lappareil principal ou de la tlcommande pour afficher Apps. Puis appuyez sur les touches pour slectionner la APP souhaite, appuyez ensuite sur la touche OK pour entrer. Ou appuyez sur la touche rapide de la tlcommande pour accder directement lAPPLICATION voulue. Netflix Toon Goggles AccuWeather YouTube Visionnez instantanment des missions et des films en diffusion continue sur Internet. Une plateforme de vido sur demande par abonnement qui propose des dessins anims amusants et ducatifs, des jeux stimulants et des chansons du monde entier et en plusieurs langues aux enfants. Indique la temprature et les conditions mtorologiques du moment partout dans le monde en degrs Celsius ou Fahrenheit. Visionnez vos contenus YouTube sur le meilleur cran de la maison. Fr 12 PERSONNALISATION DES PARAMTRES DU TLVISEUR Mdias Option Appuyez sur le bouton MENU de l'unit principale ou de la tlcommande, puis saisir les mdias sur pour slectionner Mdias, et l'utiliser pour appuyez et utiliser pour slectionner l'option souhaite. REMARQUE: Dispositifs de stockage portatifs (disque USB ou disque dur) doivent tre insrs. Visualisation de photos Aprs avoir entr Mdias, appuyez sur les boutons pour slectionner JPEG, puis slectionner le type de disque pour entrer. Ensuite, utilisez les pour naviguer dans le dossier de photos, puis slectionnez boutons l'image souhaite et appuyez sur le bouton OK, quand apparat en haut gauche, appuyez sur le bouton pour lire l'image.
/
Remarque : Format de fichier pris en charge : JPEG. Fr 13 PERSONNALISATION DES PARAMTRES DU TLVISEUR Jouer Mouvement JPG Aprs avoir entr Mdias, appuyez sur les boutons pour slectionner Motion JPG et puis slectionnez le type de disque pour entrer. Ensuite, utilisez les boutons pour naviguer dans le dossier de la vido et puis slectionnez la vido souhaite puis appuyez sur le bouton OK, quand apparat en haut gauche, appuyez sur le bouton pour lire la vido.
/
Remarque : Format de fichier pris en charge : Movimiento JPG Source Option Appuyez sur le bouton MENU de lunit principale ou sur les boutons de commande et appuyez sur la tlcommande pour slectionner le menu Source. Puis appuyez pour slec-
tionner diffrentes sources dentre entre: TV / HDMI1 / HDMI2 / HDMI3 / USB /
VGA / AV / Component et appuyez sur le bouton OK pour confirmer. sur pour entrer source et utilisez les boutons Fr 14 PERSONNALISATION DES PARAMTRES DU TLVISEUR Option Option Appuyez sur le bouton MENU de l'appareil ou sur la tlcommande pour slectionner le sur pour afficher l'interface principale. Ensuite, appuyez sur pour menu Option et appuyez sur slectionner l'option souhaite. System pour entrer. Ensuite, appuyez Format Wide Zoom Appuyez sur les boutons appuyez sur le bouton OK pour entrer. Appuyez sur les boutons slectionner les options de rglage suivantes, puis appuyez sur les boutons pour ajuster le rglage de chaque option. pour slectionner le menu de Systme, puis pour Fr 15 PERSONNALISATION DES PARAMTRES DU TLVISEUR Langue Menu Transparence Format Pour slectionner la langue des menus : anglais, franais ou espagnol. Par dfaut, la langue des menus lcran est langlais. Pour activer ou dsactiver la fonction de transparence. Pour slectionner le mode de zoom:Standard/Wide/Wide Zoom/Zoom. Remarque : Source dentre diffrente, les options dumode zoom peuvent varier. Rduction de Ruido Pour rduire le niveau de bruit de lappareil connect :
DSACTIV/Faible/Moyen/Fort. Pour rgler les paramtres des options avances :
H-POS,V-POS, Horloge, Phase ou Auto. (Mode Source VGA seulement) Mode CC Avanc Slection de base Sous-Titrage Slection avance OPTION Slectionnez le mode CC: On, Off ou CC sur Muet. Slection de base: CC1, CC2, CC3, CC4, Texte1, Texte2, Text3, Text4. Slection avance: Service1, Service2, Service3, Service4, Service5 et Service6. Options: mode, style de police, taille de police, la police bord style, la police couleur de bord, FG_Color, bg_color, FG_ Opacit, BG_Opacity. Slectionnez cette option pour activer ou dsactiver la fonction de commande dynamique de la luminance. Veille: Slectionnez une priode de temps aprs laquelle le tlviseur passe automatiquement en mode veille:
Off / 5/10 / ... / 180/240 min. Alternative: Vous pouvez appuyer sur le bouton SLEEP plusieurs reprises pour slectionner le nombre de minutes directement. Fuseau horaire: Slectionnez un fuseau horaire: Hawaii /
Alaska / Pacifique / Montagne / Centrale / Est / Atlantique
/ Terre-Neuve.Heure d't: Slectionnez cette option pour activer / dsactiver l'heure d't. Dfinissez les autres paramtres:
EDID HDMI: slectionnez la version HDMI: HDMI 2.0 /
HDMI 1.4. INlink(HDMI-CEC): dfinir les paramtres suivants:
contrle INlink, alimentation de l'appareil Off, TV Power On, rcepteur audio, INlink Liste de priphriques, Racine Menu. Restaurer le tlviseur aux rglages d'usine par dfaut. DLC Heure Other setting Mode Usine Fr 16 PERSONNALISATION DES PARAMTRES DU TLVISEUR Prog. Appuyez sur les boutons sur le bouton OK pour entrer. Appuyez sur les boutons les options de rglage suivantes, puis appuyez sur les boutons le rglage de chaque option. pour slectionner le menu de Prog., puis appuyez pour slectionner pour ajuster Air / Cble Balayage Automatique Montrer/Cacher No.canal Nom du canal Signal Information Pour slectionner lantenne : Air ou Cble. Slectionnez Auto Scan pour rechercher les canaux air ou cble disponibles. Pour afficher ou masquer le canal slectionn. Pour afficher le nom du canal actuel. Pour afficher ltiquette du canal actuel. Pour afficher la information du signal actuel. Support USERS MANUAL MANUEL DE LUTILISATEUR MANUAL DEL USUARIO WD48 UW2 490 Appuyez sur les boutons pour slectionner le menu de Support,puis appuyez sur le bouton OK pour voir le mode d'emploi intgr. Fr 17 PERSONNALISATION DES PARAMTRES DU TLVISEUR Verro Appuyez sur les touches pour slectionner le menu Verro, puis appuyez sur la touche OK pour entrer. Utilisez les touches 0 9 pour entrer le mot de passe 4 chiffres qui vous permettra douvrir le menu Verro. Appuyez sur les touches suivantes, puis sur la touche pour slectionner les options de verrouillage pour rgler les paramtres de chaque option. Remarque : Le mot de passe par dfaut est 0000 . Utilisez les touches 0 9 pour entrer lancien mot de passe, puis entrez le nouveau mot de passe 4 chiffres. Entrez le nouveau mot de passe une autre fois pour le confirmer. Slectionnez cette option pour activer ou dsactiver le verrouillage du systme. Les options suivantes [US, Canada, RRT Setting and Reset RRT (USA, Canada, Rglage RRT et Rinitialisation RRT)] ne seront accessibles que lorsque vous activerez le verrouillage du systme. Tlvision CLASSEMENT TL: Appuyez sur la touche OK pour verrouiller ou dverrouiller le classement tl. Slectionner le classement de la MPAA : N/
A,G, PG, PG-13, R, NC-17 ou X. Permet de slectionner le classement de la MPAA pour les anglophones Permet de slectionner le classement de la MPAA pour le Qubec : E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+. MPAA Canada Anglais Canada Franais Pour dfinir le tableau rgional de classification. Select to reset the RRT setting. Effacer tous les paramtres de verrouillage. Changer le Code Verrouillage USA Canada RRT Paramtre Rinitialiser RRT Clear Lock Fr 18 PERSONNALISATION DES PARAMTRES DU TLVISEUR Image Energy Saving Appuyez sur les touches sur la touche OK pour entrer. Appuyez sur les touches options de image suivantes, puis sur la touche de chaque option. pour slectionner le menu Image, puis appuyez pour slectionner les pour rgler les paramtres Lumiere Blue Screen Mode dimage Contraste Saturation Permet de basculer entre les modes dimage : Dynamique / Film /
Energy Saving /Utilisateur / Standard. Alternative : vous pouvez appuyer sur la touche P.MODE pour slectionner le mode imagen directement. Permet laffichage de larrire-plan en bleu si le signal est faible ou inexistant. Permet daccrotre ou de diminuer la quantit de blanc dans limage.
(Pour le mode Utilisateur) Permet de rgler lcart entre les parties claires et sombres de limage. (Pour le mode Utilisateur) Permet de rgler lintensit des couleurs. (Pour le mode Utilisateur) Permet de rgler le niveau de nettet des contours entre les parties claires et sombres de limage. (Pour le mode Utilisateur) Tinte Permet de rgler lquilibre entre les niveaux de rouge etde. Temp. Couleur Permet de basculer entre les tempratures de couleur : Froid/
Normal/Chaude. Espace colorimtrique: Pour rgler les paramtres suivants:
Mode couleur, Teinte, Saturation, Luminosit et Reset.White Balance: Pour rgler les paramtres de balance des blancs. Cycle parmi Mouvement Estimation et Motion Modes de rmunration: Medio / Haut / Desactive / Bas. Advanced Setting Finesse MEMC Fr 19 PERSONNALISATION DES PARAMTRES DU TLVISEUR Rseau THTF4KOTT-00000000000000000000 000100029265 Appuyez sur les touches sur la touche OK pour entrer. Appuyez sur les touches options de rseau suivantes, puis sur la touche de chaque option. pour slectionner le menu RSEAU, puis appuyez pour slectionner les pour rgler les paramtres Network Settings Network Status Dactivate Netix Dactivate VUDU Netflix ESN Choisissez deux types de rseau : Sans fil ou local. Afficher l'tat du rseau. Dsactiver Netflix et effacer les informations du compte. Dsactiver Vudu et effacer les informations du compte. Numro de srie lectronique. Auto Scanning.Please wait... Fr 20 PERSONNALISATION DES PARAMTRES DU TLVISEUR Rappel concernant la connexion Internet :
Les situations suivantes peuvent se produire lorsque vous vous connectez Internet pour utiliser vos services TPC. 1. Veuillez vrifier la puissance de votre signal Internet lorsque vous vous connectez Internet. Une puissance du signal infrieure 50 peut entraner une mauvaise connexion et une image moins fluide. 2. L'accs aux services TPC peut prendre jusqu' 30 secondes lors de la connexion Internet. Vitesse Internet de 10 Mo ou plus recommande Audio Appuyez sur les touches touche OK pour entrer. Appuyez sur les touches de audio suivantes, puis sur la touche option. pour slectionner le menu Audio, puis appuyez sur la pour slectionner les options pour rgler les paramtres de chaque Mode Sain Basses Aigus Permet de slectionner une technique damlioration audio : Standard /
Musique / Cinma / utilisateur Alternative : vous pouvez appuyer sur la touche S.MODE pour slectionner le mode audio directement. Pour rgler lintensit relative des sons plus graves. (Pour le mode Utilisateur) Pour rgler lintensit relative des sons plus aigus. (Pour le mode Utilisateur) Pour rgler le volume relatif des haut-parleurs dans un systme qui en compte plusieurs. Pour slectionner le mode de sortie audio numrique : RAW/PCM. Balance SPDIF Mode Ambiophonie Sound Pour amliorer votre exprience dcoute. Auto Volume Language audio Pour rgler automatiquement les niveaux de volume. Pour slectionner la langue audio : English, franais, espagnol. Fr 21
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-04-26 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-04-26
|
||||
1 | Applicant's complete, legal business name |
KUNSHAN KONKA ELECTRONICS CO., LTD
|
||||
1 | FCC Registration Number (FRN) |
0025203290
|
||||
1 | Physical Address |
No.189 East Qianjin Road
|
||||
1 |
KUNSHAN, JIANGSU, N/A 215300
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AHAK
|
||||
1 | Equipment Product Code |
WD48UW4490
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R**** W********
|
||||
1 | Title |
ALE
|
||||
1 | Telephone Number |
(86) ********
|
||||
1 | Fax Number |
(86) ********
|
||||
1 |
w******@konka.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD TV | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Waltek Services(Shenzhen) Co., Ltd.
|
||||
1 | Name |
p**** z********
|
||||
1 | Telephone Number |
86755********
|
||||
1 | Fax Number |
86755********
|
||||
1 |
p******@waltek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0180000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC