FCC ID: 2AM4E37130-AGJ5 Noodoe II

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. If the identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module, Contains FCC ID: 2AM4E37130AGJ5. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the multi-transmitter procedures. The host integrator must follow the integration instructions provided in this document and ensure that the composite-system end product complies with the requirements by a technical assessment or evaluation to the rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the requirements by a technical assessment or evaluation to the rules, including the transmitter operation and should refer to guidance in KDB 996369. This module will be installed into a motorcycle instrument panel and only approved for use by the grantee in its own products. It not intended for sale to third parties,thus the integration instructions not be detailed. The instructions placed in the theory of operation exhibits using for long term confidential. Processor ARMR CortexR -M7 based Processor Noodoe2.0 OS Noodoe OS 128MB (64MBx2) SDRAM Capacity 4GB eMMC Transflective TFT LCD 3.6/ 6 Display 480 x 480 pixel resolution (3.6) 480 x 800 pixel resolution (6) Sensor Ambient Light Sensor and G Sensor Wireless Connectivity Function Bluetooth Classic EDR & BLE V4.2 Noodoe is a connected scooter experience that puts you, the rider, at the center of everything. The KYMCO Noodoe app helps you make your connected KYMCO experience thoughtful, personal and social. Noodoe is thoughtful. As you approach your KYMCO, your phone automatically connects to the scooter. When you turn on the ignition, you are greeted with your favorite photo. Noodoe reminds you of the weather forecast, so you know that it's not going to rain. While riding, the world's first road-centric navigation for two-wheel transportation guides you to your destination. When the gas runs low, the smart compass helpfully shows you nearby gas stations. At a stoplight, Noodoe presents you with missed calls, breaking news, new messages, and friends social updates, all without you having to pull out the phone. When you park, Noodoe automatically memorizes the location. From the moment you approach the scooter, until the end of each journey, every moment is inspirational and fun. Noodoe is personal. It helps you celebrate self-expression because no two persons in the world are the same. You have different likes, different needs, and crave for new ways to express yourself. Because of this, Noodoe is a real-time cloud service that gives you choices. Noodoe cloud lets you browse different dashboard designs, download the ones you like to your personal collection, and install them onto your scooter. Beyond a great rider experience, Noodoe makes your scooter the only one of its kind. Noodoe is social. With a bit of inspiration, you can become a Noodoe dashboard designer and publish your designs to the Noodoe cloud. Noodoe is a full-fledged social network where you can share your creations, follow others, and be followed. The result:

endless one-of-a-kind creations, representing the ultimate form of self-expression. It's no longer just about moving from A to B, but a rewarding experience of self-expression, creativity, sharing, belonging, and social interactions. Key functions for staying connected and informed:

Navigation Let the world's first road-centric navigation optimized for two wheel transportation guide you to your destination. Time Select your preferred clock designs from the Noodoe cloud, you can also design your own clock. Weather Noodoe displays current weather conditions and provides the weather forecast for you. You can select preferred weather dashboard designs from the Noodoe cloud or design your own weather dashboard. Speed Select your preferred speedometer designs from the Noodoe cloud or design your own speedometer dashboard. Smart Compass With you as the center point, the system provides relative locations of nearby KYMCO dealers, gas stations, convenience stores, and other useful points of interest. Groups - Show the relative locations of your riding crew members on the dashboard as you tour around town. Gallery Choose your favorite image from your phone to greet you on the dashboard as you start up your Kymco scooter. Notification Noodoe displays important notifications from your smart phone when the scooter is stopped. Notifications include Facebook, Line, WhatsApp, missed calls, etc. Find My Ride Noodoe records the last parked location when the ignition is turned off so it can guide you to the parked location via your phone when you're ready to hit the road. Journey Diary Create and share diaries of your most awesome riding adventures. You can also explore epic journeys of other Noodoe riders. Dimension 86.9 x 79.6 x 18.4mm (L x W x H) (PCBA module) Remark

*All specifications are subject to change without notice.

No. 35, Wan Hsing St., Sanmin Dist., Kaohsiung City 807, Taiwan, R.O.C. TEL: (886)-7-382-2526 EXT. 250 FAX: (886)-7-382-4737 KWANG YANG MOTOR CO., LTD. Authority to Act as Agent Date: 2020-11-19 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Taiwan to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Kwang Yang Motor Co., Ltd. / No. 35, Wansing St., Sanmin District, Kaohsiung City 80794, Taiwan For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes Agency Agreement Expiration Date:

FCC benefits. Thank you, By

Permanent

(Signature) On behalf of

Kwang Yang Motor Co., Ltd.

(Company Name) Title Senior Engineer Telephone

+886-7-382-2526 Ext. 25 Leo Chen

(Print Name) 1

No. 35, Wan Hsing St., Sanmin Dist., Kaohsiung City 807, Taiwan, R.O.C. TEL: (886)-7-382-2526 EXT. 250 FAX: (886)-7-382-4737 KWANG YANG MOTOR CO., LTD. Confidentiality Letter Date: 2020-11-19 Subject: Confidentiality Request for FCC ID: 2AM4E37130-AGJ5;

Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Kwang Yang Motor Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

public. Short-Term Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

Senior Engineer

(Signature/Title) Leo Chen

(Print name) 1

No. 35, Wan Hsing St., Sanmin Dist., Kaohsiung City 807, Taiwan, R.O.C. TEL: (886)-7-382-2526 EXT. 250 FAX: (886)-7-382-4737 KWANG YANG MOTOR CO., LTD. 30-Nov-20 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AM4E37130-AGJ5 Models: 37130-AGJ5, 37130-AKD3 Declaration on Similarity We herewith confirm that for the models listed above the RF Transmitter Module is Electrically Identical. The differences are in the model numbers and in the digital data interface. 1) 37130-AGJ5 is large screen and 37130-AKD3 is small screen. ___________________ Leo Chen

(Signature)

(Printed) 1

Applicant/Grantee Kwang Yang Motor Co., Ltd. FCC ID:

2AM4E37130-AGJ5 Section 15.212 Modular Transmitters /

X Request for Modular Approval Request for Limited Modular Approval Requirements Device Conditions Comply (Y/N) Single Modular Approval Requirements The radioelements shielded, please see exhibition External Photo The radioelements must have the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation. The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The Equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. The module shall be tested for compliance with the applicable standard in a stand-

alone configuration, i.e. the module must not be inside another device during testing. All modulation and data input(s) are buffered. The EUT has buffered data inputs, it is integrated on the RF chip Output power is controlled by the RF Chip and de-coupled from supply voltage variations. Frequencies are determined by Crystal The antenna is part of the module The modular transmitter was tested in a stand-alone configuration via a UART Interface. The module shall comply with the Category I equipment labelling requirements. In the exhibition OEM manual, there are Instructions given to the OEM on how to label the end product. 1 2 3 4 5 6 Y Y Y Y Y Y The modular transmitter complies with all specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer will provide adequate instructions along with the module to explain any such requirements. A copy of these instructions is included in this application for equipment authorization:

Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). 7 8a Instructions in User Manual Please refer the Maximum Permissible Exposure Information. Y Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Name/Title: Yu-Jen Chen / Senior Engineer Company Name: Kwang Yang Motor Co., Ltd. Date: 24/06/2021