FCC ID: FSU200BT MULTIMEDIA SPEAKER SYSTEMS

Operation Description 1. The USB power plug of speaker is plugged in. English 2. Turn on the power and enter the LINE function by default. The red LED is always on. At this time, the audio cable can be inserted into the audio device to play music. 3. Short press button on the remote control to enter the Bluetooth status, and the blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After the pairing is successful, there will make a notification sound. The blue LED is always on. At this time, the audio device can play music. 4. Short press button on the remote control to stop playing music, click again to resume playback. Short press on the remote control, increase the volume, press twice consecutively to go to the previous song, long press button on the remote control to increase the volume, and the speaker sounds louder. Short press on the remote control, the volume decreases, press twice consecutively to go to the next track, long press button on the remote control to decrease the volume, and the speaker sound is reduced. 5. Pairing: In the Bluetooth status, long press button on the remote control for 3 seconds. When the speaker will make a notification sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue LED flash alternately. At this time, Bluetooth device pairing can be performed. 6. After press button on the remote control to enter the Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode. 7. In pairing mode, search for Bluetooth pairing device 3 times, and it will automatically turn off if there is no signal for 5 minutes in Bluetooth mode. 8. Turn off: Long press the button for 3 seconds to turn off power and the LED. 9. After restarting, the volume level will automatically return to the middle value, and the last volume level will not be remembered. Button Function English Status Function Button Operation Turn off Turn on Short press the button Power on Bluetooth 1 Power on Line 2 Bluetooth

/ Line Increase Volume 3 Bluetooth

/ Line Decrease Volume Short press button Short press button Long press the button for 3 seconds Short press button Long press button Shot press button Long press button 4 Bluetooth Previous Track Press twice button Description The red LED is on when the USB power cord of speaker is plugged in, and enters LINE mode Blue LED flash alternately and enter pairing status. The blue LED is always on. When the speaker will make a notification sound, it indicates that the current LINE mode is entered. The red LED always on. Short press the to increase volume. button button Long press the to increase volume continuously. Short press the decrease volume Long press the decrease volume continuously. button to button to button Press twice consecutively to go to the previous track Power on Turn off Turn off power and LED. Status Function Button Operation Description 5 Bluetooth Next Track Play music Pause 6 Line Mute Press twice button Short press button Short press button 7 Bluetooth PAIR Long press the button for 3 seconds English button Press twice consecutively to go to the next track button to Short press stop playing music, click again to resume playback. Short press the enters to mute status. Press it again, the music unmute. button button Long press the for 3 seconds. When the speaker will make a notification sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue LED flash alternately. At this time, Bluetooth device pairing can be performed. 8 RGB lighting touch control Switch between ten lighting modes Touch RGB lighting button can switch between ten lighting mode. English FCC warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-ncrease the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

KYE SYSTEMS CORP. Authorization Company: KYE SYSTEMS CORP. Address: No. 492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 24160, Taiwan (R.O.C.) Product Name: MULTIMEDIA SPEAKER SYSTEMS Model Number(s): USB SoundBar 200BT SP-XXXXXXX, USB SP-HF380BT, USB SoundBar XXXXX, USB SoundBar XXXXX XX, USB SoundBar RGB BT, USB SoundBar XXX XX, USB SoundBar XXXX XX, XXX XXXXXXXX XXXX, XXX XXXXXXXX XXXXX(X can be 0-9 & A-Z and blank) Product Description: MULTIMEDIA SPEAKER SYSTEMS We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Ricky Chen Title:

Section Supervisor Company: KYE SYSTEMS CORP. Date: 2022/06/8

KYE SYSTEMS CORP. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: FSU200BT Date: 2022/06/8 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ricky Chen Title: Section Supervisor

Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The difference is only in model names and appearance. Production name Trade name Model no. FCC ID: FSU200BT MULTIMEDIA SPEAKER SYSTEMS Genius USB SoundBar 200BT SP-XXXXXXX, USB SP-HF380BT, USB SoundBar XXXXX, USB SoundBar XXXXX XX, USB SoundBar RGB BT, USB SoundBar XXX XX, USB SoundBar XXXX XX, XXX XXXXXXXX XXXX, XXX XXXXXXXX XXXXX(X can be 0-9 & A-Z and blank) Confirmed by KYE SYSTEMS CORP. Signature:

Name:

Ricky Chen Title:

Section Supervisor Date: 2022/06/8