English Hardware Installation 1. Install two AA batteries in the mouse. Pairing Process in Vista and Windows XP SP2 1. Open the Windows control panel, then select Bluetooth devices. 2. Click Add.. 3. Select My device is setup and ready to be found, then click Next. 1 English 4. Press and hold the CONNECT button under the mouse. 5. In Peripherals (Keyboards, mice, joysticks), select Genius Bluetooth Mouse and click Next. 6. Select Dont use a passkey and click Next. 2 English 7. Windows will start to connect the Genius Bluetooth Mouse automatically. Press the finish button after the connection process is completed. Once the connection between the Genius Bluetooth Mouse and your computer is established, the connection will be kept permanently. That means the connection will re-establish automatically each time you run Windows. Pairing Process in Mac OS X 10.2.8 or later 1. Press and hold the CONNECT button under the mouse. 3 English 2. Click the Bluetooth icon on the task bar and select Setup Bluetooth device. 3. Click Continue when the Bluetooth Setup Assistant appears. 4 4. Choose Mouse and press Continue to the next step. 5. When Bluetooth finds the Genius Bluetooth Mouse, please press Continue to the next step. 6. Click Continue when the Passkey exchange with your mouse appears. English 5 7. The connection is now successful and you can use your Genius Bluetooth Mouse. English Now you can use the Genius Bluetooth Mouse wirelessly with a Bluetooth enabled Apple computer. Afterwards, the connection of the Genius Bluetooth mouse will re-establish automatically each time Mac OS X runs. 6 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.