QUICK SETUP GUIDE Safety Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, outlets, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way. Examples of service-requiring damages include power supply cord or plug damage, liquids has been spilled or objects falling onto the apparatus, apparatus not operating normally, and/or apparatus being dropped. Do not install this equipment in a confined space, such as a book case or similar unit, and make sure that it is well ventilated. The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, or curtains. WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on apparatus. WARNING:
The power adapter is used as a disconnect device. The disconnect device shall remain readily operable. The equipment shall be used at a maximum of 95(35) ambient temperature. WARNING:
Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
Guarantee
Maintenance Cleaning the Unit No sound in Bluetooth Cannot establish Bluetooth connection with this product Cannot connect to Wi-Fi
kygolife.com visit www.
Oslo,Norway Email:webshop@kygolife.com Org.nr NO 916594844 1. Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and the device name you entered during Google Home App setup is selected. 2. Turn up the volume on your speaker. 3. Turn up the volume on your Bluetooth device. 4. Make sure that your Bluetooth device is not muted. 5. Make sure that your speaker is paired to the correct Bluetooth device. 1. Shorten the distance between your speaker and your Bluetooth device. 2. Make sure that your speaker and Bluetooth device are both in pairing mode. 3. Make sure that your Bluetooth device is not connected to any other device. 4. Make sure that your speaker is not paired to any other Bluetooth device. 5. Make sure that your Bluetooth device supports Bluetooth v4.2. 6.Make sure that you have selected B9/800 when you entered during Google Home App setup. 7. Turn your devices off, then on. Re-pair your speaker and your Bluetooth device. 1. Make sure that the wireless network is not disturbed by microwave ovens, DECT phones, or other neighboring Wi-Fi devices. 2. Make sure that the speaker and your device shar the same network. 3. Make sure that your router/modem is on and that you are within range of it.
Quick Setup Guide Power on/off Bluetooth Mic mute AUX IN CHARGE IN AUX IN CHARGE IN Kygo Button
Features Bluetooth 4.2 8 hours playing time Chromecast built-in 2,4/5 GHz Wifi support Google Assistant built-in 360 degree sound profile LED indicator for low battery Great Sound quality with AAC Compatible with Kygo Sound App IPX 7 - Waterproof and flotable Multiroom playback across speaker with built in chromecast Four RGBs Mic LED Indicator Mic Description Google Voice Assistant Function Power ON/OFF VOL+
VOL-
Bluetooth 1. Press about 2s to power on, press again to power down. 2. If power on, the WiFi mode set up. After WiFi setup finished, if no any action in 30mins,unit will enter to standby mode, but unit must keep listening for hotword if micphone is not muted. Press to turn up the volume, holding to keep going up. Press to turn down the volume, holding on to keep going down. 1. Press the button once: if the speaker is playing then pause, if the speaker is paused then continue playing; If in Bluetooth pairing mode and no connection to any device, then exit pairing mode
(in this state with no action, then auto exit pairing mode 10 mins later). 2. Short press about 2s: enter Bluetooth pairing mode, if Bluetooth connected, then disconnected current connection and go to new Bluetooth pairing. 3. Long press>5s: disconnect all Bluetooth connections and enter to pairing mode. 4. Automatic reconnect last device in pairing mode. 5. Keep connection in standby mode with 30mins, press Play button on Phone can wake up and streaming. 6. In standby mode, after 30min, will disconnect Bluetooth connection. Press button for Mic mute on and off. Mic Mute Kygo Button Short press it will be connected to live streams from Kygo concert or Google Cast Stream Factory Default Resetting Source change festivals and so on. Install Google Home app into phone, follow instruction of application for wifi setup and music streaming process. When the speaker power on, hold the vol- & vol+ at the same time for 15s, the speaker will power off by itself and reset factory default settings. WiFi streaming: Once detect signal from Google cast, auto switch to WiFi mode to play music. In standby mode, still can detect signal and wake up to stream music. Bluetooth: In Bluetooth mode, once unit be paired with device, can play music, if WiFi is playing music, stop or pause WiFi playing first. Aux IN: In AUX IN connection, Bluetooth is disabled; if you wake up with OK, Google, then change to WiFi mode. Just start with "OK Google", then ask it questions or tell it to do things like this:
"Play some jazz"
Turn up the volume"
"Set a 13 minute timer for pizza"
"Do I need an umbrella today?"
Google Chromecast Built-in Follow the three steps below to enjoy this feature:
1. Connect a phone or tablet to the same Wi-Fi network as your speaker using the Google Home App. 2 .Cast podcasts, music, and more from 100+ Chromecast-enabled apps. Tap the Cast button in a Chromecast-enabled app to play 3 .Tap the Cast button in a Chromecast-enabled app to play music on your speaker. Establish Bluetooth connection The speaker is equipped with Bluetooth to allow wireless playback from any Bluetooth-enabled phone or tablet. 1. If power on, Short press the button about 2s then enter Bluetooth pairing mode, blue led indicator fast flash. 2. click the device name you entered during Google Home App setup on your device to pair with the speaker. 3. After the speaker and your device are paired, you can stream music from your device to the speaker.
Troubleshooting
Specification If you have problems using this product, check the following points before you request service, never try to repair the product yourself. If you still have any problems, get support at www.kygolife.com/support. PROBLEM SOLUTION No Power Make sure that your speaker is plugged in and turned on.
Function LED indicators System Boost up 4RGB LEDs show white color slow breathing 1.Red LED fast flash (Battery power is less than 20%) 2.Red LED slow breathing (Solid Red when 100%
charged) Reach Max Volume 4 RGB all show white fast flash for two times Bluetooth Aux-in Mic Mute Factory Default Resetting 1.Blue LED fast flash (Pairing mode) 2.Solid blue(Connected) 3.Blue LED off(Disconnect) Solid Green Micphone off: 4 RGB Orange 4RGB LEDs show white constant with fade in 0.5s