IPAS IPAS(Intelligent Proximity Alert System) IPAS is designed to reduce the risk of collision between pedestrians and moving vehicles in your workplace. The system uses the cutting-edge RF technology to precisely measure the distance between the vehicles and pedestrians providing highly reliable collision warning. Functionality Key Map for Operating and Sensing 12/12/2018 1 IPAS Vehicle Tag small Datasheet Ultra wideband technology based vehicle tag for detecting moving pedestrians and vehicles. Ultra Wideband based intelligent proximity alert system Standard deviation of distance measurement 10cm CAN bus interface with 12/24V external power Easy use without a setup Simple installation and detachment using magnetic pads and a lever Detecting functions are unaffected by wind, falling rain or snow, fog, humidity, air temperature, or light Tag operates in warehouse, factory, port and construction/mining site as a safety device IP65 enclosure withstands harsh environments Technical Data General Specifications Communicatio n Method Interface Max. Detectable Distance Standard Deviation of Detecting Distance UWB CAN Bus 2.0 30m 2.9cm
(400ms, 30m) Weight 442g Ultra Wideband RF Parameter Method Frequency Bandwidth UWB compliant IEEE802.15.4-
2011 STD 3993.6MHz 499.2MHz Conducted Rx Sensitivity
-93dBm
/500MHz
(6.8Mbps, PER 1%) Conducted Tx Power Density Max
-41.3dBm/MHz Data Rate 6.8Mbps Electrical Characteristic Power DC 12V / 24V Operating Specifications Operating Voltage Power Consumption DC 9~32V Below 4W Operating Temperature
-30~85 Storage Temperature Ingress Protection Rating
-40~85 IP65 Connector I.P Connector PLUG 6P
(M10xP0.5) 12/12/2018 2 IPAS Vehicle Tag small Overview IPAS Vehicle Tag is a safety-assisting device which prevents collisions between pedestrians and vehicles by signaling dangers in 2 way communication to both drivers and pedestrians in industrial working site. Signal processing tag determines the distance from the vehicle tag to the object based on the time delay of the return signal. The tag can be configured to a caution and a warning zone. When a pedestrian enters into the caution and danger area of the vehicle tag, the sound alarm comes out from the indicator connected with the vehicle tag. The two zones are factory pre-set to default distances; they can be reconfigured for different distances using buttons on IPAS Indicator installed with the vehicle tag. The tag and the indicator can be connected using IPAS Cable Harness. The sensitivity was pre-calibrated at the factory, assuming that the detecting field will be clear of obstacles. The sensitivity cannot be adjusted by users handling. Caution Area Danger Area A B Figure2.IPASVehicleTagDetecting Distances Minimum Distance Maximum Distance A B 10m 10m A must be set-up lower than B (AB) 1m 1m Hysteresis, applies to IPAS, is a dynamic lag between an input and an output that disappears if the input is varied more slowly; this is known as rate-dependent hysteresis. However, phenomena such as the magnetic hysteresis loops are mainly rate-independent, which makes a durable memory possible. Systems with hysteresis are nonlinear, and can be mathematically challenging to model. Some models such as the Preisach model
(originally applied to ferromagnetism) and the Bouc-Wen model attempt to capture general features of hysteresis; and there are also phenomenological models for particular phenomena such as the Jiles-Atherton model for ferromagnetism. 3 Figure3.Hysteresis 12/12/2018 IPAS Vehicle Tag small Specifications Dimension Connector Specifications Pin No. Function P01 P02 P03 P04 P05 P06
+12V CAN_L CAN_H RS232_TX RS232_RX GND Wire Description Size AWG #26 Color Red Yellow Blue White Green Black 12/12/2018 4 IPAS Vehicle Tag small Accessory Products IPAS Cable Harness(6M) IPAS Extension Cable(6M) IPAS Cable / Cigar Jack Adapter
(250V 5A Fuse Included) IPAS Cable / Open Wire Adapter
(250V 5A Fuse Included) Packing Figure7. 1. Inner Box Figure7. 2. Gift Box 12/12/2018 5 IPAS Vehicle Tag small Certifications CE: ETSI EN 302 065-1 V2.1.1 (2016-11) KC: MSIP-CRM-KWO-PAS-K01-10 HS Code : 8531-10.9000 Country of Origin : Republic of Korea Model No : PAS-K01-12 FCC ID : ZE8-PAS-K01-12 Manufacturer : KYUNGWOO SYSTECH, Inc. / KOREA FCC notice to users The following statement applies to all products that bear the FCC logo on the product label. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. See 47 CFR Sec. 15.105(b). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(a)(3). Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 12/12/2018 6 IPAS Vehicle Tag small CAUTION : Make No Modification to this Product Any modifications to this product not expressly approved by Kyungwoo Systech could void the users authority to operate the product. Contact Kyungwoo Systech for more information. Kyungwoo Systech, Inc. Limited Warranty Kyungwoo Systech, Inc. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Kyungwoo Systech, Inc. will repair or replace, free of charge, any replace, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of KIGIS product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. IMPLIED (INCLUDING, WITHOUT LIMITATION, This Warranty is exclusive and limited to repair or, at the discretion of Kyungwoo Systech, Inc., replacement. IN NO EVENT KYUNGWOO SYSTECH INC. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Kyungwoo Systech, Inc. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Kyungwoo Systech, Inc. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Kyungwoo Systech, Inc. will void the product warranties. All specifications published in this document are subject to change; Kyungwoo Systech, reserves the right to modify product specifications or update documentation at any time. For the most recent version of any documentation, refer to: www.kyungwoo.com, www.kigistec.com. 12/12/2018 7