FCC ID: 2BD9AS05051-4051 Wireless Controller

User Manual for Multi-functional Control Module SPECIFICATION INPUT :12/24V OUTPUT: 5A max. For each port, 8A max. For total Description on control functions:

1. Connecting the IR sensor to the control module with cable:

a. Connect the IR sensor to the control module, and press the button on the control module for recognition, then the light will turn on. b. When DIP switch 1 is on, a single sensor can simultaneously control 3 sets of output circuits. When DIP switch 1 is off, a single sensor controls only the corresponding set of output circuits. c. When DIP switch 2 is on, the controller realizes the function of a hand-wave switch. When DIP switch 2 is off, the controller realizes the function of a door switch. d. DIP switches 3 and 4 are used to switch the color temperature. The specific correspondences are as follows:

2. Connecting the PIR sensor to the control module with cable:

a. Connect the PIR sensor to the control module, and press the button on the control module for recognition, then the light will turn on. b. When DIP switch 1 is on, a single sensor can simultaneously control 3 sets of output circuits. When DIP switch 1 is off, a single sensor controls only the corresponding set of output circuits. c. Dip switch 2 has no corresponding function. d. DIP switches 3 and 4 are used to switch the color temperature. The specific correspondences are as follows:

e. Dip switches 5 and 6 are used to adjust the PIR delay time. The specific correspondences are as follows:

3. Connecting the mechanical sensor or capacitive touch sensor to the control module with cable:

a. Connect the sensor to the control module, and press the button on the control module for recognition, then the light will turn on. b. When DIP switch 1 is on, a single sensor can simultaneously control 3 sets of output circuits. When DIP switch 1 is off, a single sensor controls only the corresponding set of output circuits. c. Dip switch 2 has no corresponding function. d. DIP switches 3 and 4 are used to switch the color temperature. The specific correspondences are as follows:

e. Dip switch 5 and 6 have no corresponding functions. 4. Connecting the wireless IR sensor to the control module (hand-wave/door switch):

a Wireless pairing: Press the button on the control module once, the indicator light will turn on, then press and hold the button until the indicator light starts to blink; Open the battery compartment of the wireless IR sensor and close it again. If the connected LED light blinks once, it indicates successful pairing. b When DIP switch 1 is on, a single sensor can simultaneously control 3 sets of output circuits. When DIP switch 1 is off, a single sensor controls only the corresponding set of output circuits. c DIP switch 2 has no corresponding function. d. DIP switches 3 and 4 are used to switch the color temperature. The specific correspondences are as follows:

e. Dip switch 5 and 6 have no corresponding functions. f. Clearing the pairing: Press the button on the control module once, the indicator light will turn on. After the indicator light turns off, press and hold the button until the indicator light starts to blink, indicating that the pairing has been cleared. 5. Connecting the wireless PIR sensor to the control module a. Wireless pairing: Press the button on the control module once, the indicator light will turn on, then press and hold the button until the indicator light starts to blink; Open the battery compartment of the wireless IR sensor and close it again. If the connected LED light blinks once, it indicates successful pairing. b. When DIP switch 1 is on, a single sensor can simultaneously control 3 sets of output circuits. When DIP switch 1 is off, a single sensor controls only the corresponding set of output circuits. c. DIP switch 2 has no corresponding function. d. DIP switches 3 and 4 are used to switch the color temperature. The specific correspondences are as follows:

e. Dip switches 5 and 6 are used to adjust the PIR delay time. The specific correspondences are as follows:

6. Explanation on sensors function and priority:

Active control category: capacitive touch sensor; IR hand-wave switch; IR door switch; machanical sensor;

wireless IR hand-wave switch; wireless IR door switch; wireless remote control;

Passive control category: PIR sensor; wireless PIR sensor. Active control has the highest priority and can override lower priority controls. For example, if someone is detected by a PIR sensor and the light is controlled to be off by an IR sensor, the light will turn off immediately without waiting for the PIR delay. After the light turns off, the PIR sensor cannot turn on the light even if someone is detected until the next time (3 minutes after no one is detected by the PIR sensor). PIR disabled function: During normal PIR delay time, if the light is turned off by other means (such as an IR hand-wave switch), the PIR function will be disabled. After there is no activity below the PIR sensor for more than 3 minutes, the PIR function will automatically recover. For controls with the same priority, the latest control overrides the previous control. For example, if both an capacitive touch switch and a wireless IR door switch are paired, the light will turn on while opening the door, but the capacitive touch switch will turn the light off again. After power is restored, the status of the wired sensor takes precedence over the one before power loss. For example, if a mechanical door switch or an IR door switch is paired with a wireless hand-wave switch, and the last control to turn off the light was through the hand-wave switch, after power is restored the output status depends on the one of the wired sensor connected to that circuit. FCC Statement changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. FCC Suppliers Declaration of Conformity Product NameWireless Controller Model number LED-CONTROL-MODULE-EASYLUX-12V-1, LED-CONTROL-MODULE-EASYLUX-

24V-1, Mec Driver Sensor Module 12V, Mec Driver Sensor Module 24V Suppliers Name: VISHTEC LLC Suppliers Address (USA) 9888 W Belleview Ave Ste 2142 Denver CO 80123 Suppliers Website: N/A Contact Email/Telephone: Alan.graham@vish-tec.com /5714007350 FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Signature : [Alan Graham]

Print name:

Date of issue: January 10, 2024

L&S Lighting Equipment (Shanghai) Co., Ltd Address: Building No.1, Lane 255 Longpan Road, Malu Town, Jiading District, Shanghai, China Confirmation Letter We, L&S Lighting Equipment (Shanghai) Co., Ltd The product: Wireless Controller And model No.: LED-CONTROL-MODULE-EASYLUX-12V-1, LED-CONTROL-MODULE-EASYLUX-24V-1, Mec Driver Sensor Module 12V, Mec Driver Sensor Module 24V FCC ID: 2BD9AS05051-4051 LED-CONTROL-MODULE-EASYLUX-24V-1, Mec Driver Sensor Module 12V, Mec Driver Sensor Module 24V have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with DS- LED-CONTROL-MODULE-EASYLUX-12V-1 .The difference lies only the input voltage. The input voltage of model LED-CONTROL-MODULE-EASYLUX-12V-1 & Mec Driver Sensor Module 12V is DC 12V, the input voltage of model LED-CONTROL-MODULE-EASYLUX-24V-1 & Mec Driver Sensor Module 24V is DC 24V.all these changes do not degrade the unwanted emissions of the certified product. Contact Name: Bob Zhao Title of Person: Supervisor Date 01/08/204

CFR 47 2.911 (d)(5) Attestation Date: 01-04-2024 FCC ID: 2BD9AS05051-4051 Grantee FRN: 0034652719 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. L&S Lighting Equipment(Shanghai)Co.,Ltd (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. L&S Lighting Equipment(Shanghai)Co.,Ltd (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Bob Zhao Job Title: bob.zhao@ls-light.com Company Name: L&S Lighting Equipment(Shanghai)Co.,Ltd

CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Date: 01/10/2024 Grantee code: 2BD9A Grantee FRN: 0034652719 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent Company NameVISHTEC LLC FRN: 0033407131 Agent Contact NameAlan Graham Agent US Address9888 W Belleview Ave Ste 2142 Denver CO 80123 Agent Email AddressAlan.graham@vish-tec.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of L&S Lighting Equipment(Shanghai)Co.,Ltd (the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Authorized Agent Contact Person NameAlan Graham Agent contact Job Title Compliance manager Agent Company nameVISHTEC LLC Applicant Information Company Name: L&S Lighting Equipment(Shanghai)Co.,Ltd Contact Name: Bob Zhao Title of PersonSupervisor Address: Building NO.1, Lane 255 Longpan Road, Malu Town, Jiading District; Shanghai China Grantee code: 2BD9A Grantee FRN: 0034652719

Date: 1/4/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID: 2BD9AS05051-4051 Grantee FRN: 0034652719 L&S Lighting Equipment(Shanghai)Co.,Ltd (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Agent Company NameVISHTEC LLC FRN: 0033407131 Agent Contact NameAlan Graham Agent US Address9888 W Belleview Ave Ste 2142 Denver CO 80123 Agent Email AddressAlan.graham@vish-tec.com Sincerely yours, Name: Bob Zhao Job Title: bob.zhao@ls-light.com Company Name: L&S Lighting Equipment(Shanghai)Co.,Ltd

L&S Lighting Equipment(Shanghai)Co.,Ltd Date: 01-04-2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) f) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: L&S Lighting Equipment(Shanghai)Co.,Ltd Contact Name: Bob Zhao Title of PersonSupervisor Address: Building NO.1, Lane 255 Longpan Road, Malu Town, Jiading District; Shanghai China

L&S Lighting Equipment(Shanghai)Co.,Ltd Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2BD9AS05051-4051 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: L&S Lighting Equipment(Shanghai)Co.,Ltd Contact Name: Bob Zhao Title of PersonSupervisor Address: Building NO.1, Lane 255 Longpan Road, Malu Town, Jiading District; Shanghai China Date: 01/04/2024