FCC ID: SQG-1001 LoRa Gateway RG191-M2

by: Laird Connectivity latest update: 2017-07-11 model: 1001

One grant has been issued under this FCC ID on 07/11/2017 (this is one of seven releases in 2017 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked instructions, warrantee terms, drivers, password defaults, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 9
1 ~ 2017-07-11 9

app s				submitted / available
1	Users Manual V2	Users Manual	pdf	634.73 KiB	October 07 2017 / November 07 2017
1		Cover Letter(s)	pdf		October 07 2017 / November 07 2017
1		External Photos	pdf		October 07 2017 / November 07 2017
1		Internal Photos	pdf		October 07 2017 / November 07 2017
1		ID Label/Location Info	pdf		October 07 2017 / November 07 2017
1		Cover Letter(s)	pdf		October 07 2017 / November 07 2017
1		RF Exposure Info	pdf		October 07 2017 / November 07 2017
1		Test Setup Photos	pdf		October 07 2017 / November 07 2017
1		Test Report	pdf		October 07 2017 / November 07 2017

exhibit
download
text

Users Manual V2

Users Manual

pdf

634.73 KiB

October 07 2017 / November 07 2017

A Datasheet Sentrius RG191-M2 Concentrator Card Pluggable M2.COM LoRaWAN Adapter RG191-M2 Concentrator Card Datasheet CONTENTS 1 Introduction ....................................................................................................................................................... 3 2 Overview ............................................................................................................................................................ 3 3 4 5 6 Specification summary ...................................................................................................................................... 3 Hardware Specifications .................................................................................................................................... 4 Pin Definitions ................................................................................................................................................... 5 FCC and IC Regulatory Statements .................................................................................................................... 7 Power Exposure Information ......................................................................................................................... 7 OEM Responsibilities ............................................................................................................................................. 7 Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 2 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet INTRODUCTION 1 The Sentrius RG191-M2 LoRaWAN Concentrator Card combines Lairds long-standing expertise in optimized RF design with the emerging LoRaWAN ecosystem. The Sentrius RG191-M2 card enables OEMs to integrate a high-performance, certified LoRaWAN gateway interface to any Linux-based platform. Lairds optimum hardware solution expands upon Sentrius drivers and reference design for improved RF performance. Comprehensive integration and design services for a custom gateway are also available via Lairds dedicated Engineering Services team and qualified LoRa antenna solutions are available from Laird. 2 OVERVIEW The module is designed around the Sentrius SX1301 digital baseband chip with an integrated LoRa concentrator IP, which is designed to perform high performance gateway function in the ISM band. The RF frontend consists of two of SX1257, high performance digital I and Q modulator/demodulator transceiver chips. The RF front-end is terminated with standard U.FL connector. The board form factor and connector pinout are designed to conform to M2.COM specifications. The card requires a single 5-volt supply and it generates its power supply requirements on-board. Standard SPI communication, reset, and power supply to the board are provided through a 75-position host interface connector. 3 SPECIFICATION SUMMARY Category Feature Specification General Radio Connectors Semtech Radios SX1301 and SX1257 (x2) Reference Design Based on Semtech Rev 1.0 - SX1301 AP1 Connector Type M2.COM E Key - http://www.m2com-standard.org/en-us External Antenna U.FL connector TX (max) 440 mA Power Consumption RX (all channels) 340 mA Voltage Input Input Idle 40 mA 5V (+/- 10%) Frequency Range RG191-M2: 902 to 928 MHz RF Characteristics RX Sensitivity Up to -140 dBm Max RF Output Power Up to +27 dBm Software Host Interface Driver Support SPI https://github.com/Lora-net/lora_gateway

(Laird testing done with Linux) Temperature Operating Range

-30C to +85C Physical Regulatory Warranty Dimensions Weight Certifications 12 months 75 x 53 x 3.8 mm

<11 g FCC/IC/CE Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 3 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet 4 HARDWARE SPECIFICATIONS Figure 1: Schematic Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 4 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet 5 PIN DEFINITIONS Table 1: Pin definitions Pin #

Pin Name Laird RG191-M2 Pinout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 GND VCC USB_D+

VCC USB_D-

USB_OTG_ID GND I2S_SCK SDIO_CLK I2S_WS SDIO_CMD I2S_SD_OUT SDIO_DATA0 I2S_SD_IN SDIO_DATA1 CB_RESET_OUT#

SDIO_DATA2 GND SDIO_DATA3 CB_PWR_ON SDIO_WAKE#

UART0_TXD SDIO_RESET#

CONNECTOR KEY CONNECTOR KEY CONNECTOR KEY CONNECTOR KEY CONNECTOR KEY CONNECTOR KEY CONNECTOR KEY CONNECTOR KEY UART0_RXD GND UART0_RTS I2C1_DATA UART0_CTS I2C1_CLK GPIO_0 GND GPIO_1 Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless Comment

+5V

+5V 1 PPS signal from a GPS receiver

Populated Populated Populated Populated Populated Populated Populated Populated 5 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet Pin #

41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Pin Name Laird RG191-M2 Pinout Comment PWM0/GPIO_8 GPIO_2 PWM1/GPIO_9 GPIO_3 GND GPIO_4 ADC_0/GPIO_10 GPIO_5 ADC_1/GPIO_11 GPIO_6 GND GPIO_7 ADC_2/GPIO_12 USB_OTG_OC#

ADC_3/GPIO_13 SIO_25/W_DISABLE#

GND I2C0_DATA ADC_4/GPIO_14 I2C0_CLK ADC_5/GPIO_15 SPI_MOSI GND SPI_MISO VDD_RTC SPI_CLK BUCKUP#

SPI_CS0#

GND SPI_CS1#

RESET_IN#

VCC WAKE#

VCC GND Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated Populated GARD ID [1=US; 0=EU]

RESERVED

RESERVED RESERVED

SPI MOSI

SPI MISO SPI CLOCK SPI CHIP SELECT

RESET [ACTIVE LOW]

+5V

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 6 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet 6 FCC AND IC REGULATORY STATEMENTS Model US/FCC CANADA/IC RG191-M2 SQG-1001 3147A-1001 The OEM must follow the regulatory guidelines and warnings listed below to inherit Laird modular approval. The RG191-M2 holds full modular approvals and has been certified for integration to products only by OEM integrators under the following conditions:

1. The antenna(s) must be installed such that a minimum separation distance of 20 cm is always maintained between the radiator (antenna) and all persons. 2. The transmitter module must not be operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. If the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: If these conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC and Industry Canada authorizations are no longer considered valid and the FCC ID and IC Certification Number cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC and Industry Canada authorization. Power Exposure Information Federal Communication Commission (FCC) Radiation Exposure Statement:

To comply with FCC RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and operating in conjunction with any other antenna or transmitter. OEM Responsibilities WARNING: The OEM must ensure that FCC and Industry Canada labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Laird FCC identifier for this product. Contains FCC ID: SQG-1001 Contains IC: 3147A-1001 The OEM of the RG191-M2 module must only use the approved antenna(s) listed above (TBD), which have been certified with this module. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end-product. The user manual for the end-product must also include the following information in a prominent location:

To comply with FCC and Industry Canada RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 7 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on visible on outside of device:

The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Label and text information should be in a size of type large enough to be readily legible, consistent with the dimensions of the equipment and the label. However, the type size for the text is not required to be larger than eight point. CAUTION:

The OEM should have their device which incorporates the RG191-M2 tested by a qualified test house to verify compliance with FCC Part 15 Subpart B limits for unintentional radiators. WARNING:

Changes or modifications not expressly approved by Laird could void the users authority to operate the equipment. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver connected. Consult the dealer or an experienced radio/TV technician for help. FCC Warning:

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Industry Canada (IC) Warning:

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. French equivalent is:

Le prsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 8 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet IC Radiation Exposure Statement To comply with Industry Canada RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be operating in conjunction with any other antenna or transmitter. REMARQUE IMPORTANTE Dclaration IC d'exposition aux radiations Pour se conformer Industrie Canada RF limites d'exposition pour la population gnrale / exposition non contrle, l'antenne utilise pour ce transmetteur doit tre installe pour fournir une distance d'au moins 20 cm de toutes les personnes et ne doit pas fonctionner en conjonction avec toute autre antenne ou transmetteur. Modular Approval OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). Approbation modulaire OEM intgrateur est toujours responsable de tester leur produit final pour les exigences de conformit supplmentaires ncessaires ce module install (par exemple, les missions de priphriques numriques, les exigences de priphriques PC, etc.) Antennas This radio transmitter RG191-M2 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This device has been designed to operate with the antenna listed below, and having a maximum gain of 2.0 dBi

(LSR 900 MHz Dipole). Antennas not included in this list or having a gain greater than 2.0 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. List of all Antennas Acceptable for use with the Transmitter 1) LSR 001-0002 center-fed 900 MHz dipole antenna and LSR 080-0001 U.FL to Reverse Polarity SMA connector cable. Antennes Cet metteur radio RG191-M2 a t approuv par Industrie Canada pour fonctionner avec les types d'antennes lists ci-dessous avec le gain maximal admissible indiqu. Les types d'antenne non inclus dans cette liste, ayant un gain suprieur au gain maximal indiqu pour ce type, sont strictement interdits pour tre utiliss avec ce priphrique. Cet appareil a t conu pour fonctionner avec l'antenne indique ci-dessous, et ayant un gain maximal de 2,0 dBi (Dipole LSR 900 MHz). Les antennes non comprises dans cette liste ou ayant un gain suprieur 2,0 dBi sont strictement interdites pour tre utilises avec cet appareil. L'impdance d'antenne requise est de 50 ohms. Liste de toutes les antennes Acceptables pour l'utilisation avec l'metteur 1) LSR 001-0002 antenne diple de 900 MHz alimente au centre et LSR 080-0001 U.FL la Polarit Inverse SMA Cble de connexion. Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com www.lairdtech.com/wireless 9 Copyright 2017 Laird. All Rights Reserved Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610 RG191-M2 Concentrator Card Datasheet IMPORTANT NOTE If these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end-product

(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: " RG191-M2 Contient des IC: 3147A-1001". Embedded Wireless Solutions Support Center:

		frequency	equipment class	purpose
1	2017-07-11	923.3 ~ 927.5	DTS - Digital Transmission System	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2017-07-11
1	Applicant's complete, legal business name	Laird Connectivity
1	FCC Registration Number (FRN)	0022590616
1	Physical Address	W66N220 Commerce Court
1		Cedarburg, Wisconsin 53012
1		United States

app s	TCB Information
1	TCB Application Email Address	h******@acbcert.com
1	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1	Grantee Code	SQG
1	Equipment Product Code	1001

app s	Person at the applicant's address to receive grant or for contact
1	Name	B****** S**
1	Title	VP Strategic Business Development
1	Telephone Number	262-4********
1	Fax Number	262-3********
1	E-mail	b******@lairdconnect.com

app s	Technical Contact
1	Firm Name	Laird Technologies
1	Name	T** T**** S**
1	Physical Address	W66N220 Commerce Court
1		Cedarburg, 53012
1		United States
1	Telephone Number	262.4********
1	Fax Number	262.3********
1	E-mail	T******@lairdtech.com

app s	Non Technical Contact
1	Firm Name	Laird Technologies
1	Name	T** T S**
1	Physical Address	W66N220 Commerce Court
1		Cedarburg, 53012
1		United States
1	Telephone Number	262.4********
1	Fax Number	262.3********
1	E-mail	T******@lairdtech.com

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	DTS - Digital Transmission System
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	LoRa Gateway RG191-M2
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Single Modular Approval
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Power Output is Conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This filing meets the SAR threshold exclusion set forth in KDB 447498 at the distance specified in the filing and therefore can be used in mobile/portable configurations that meet the exclusion distance.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	Laird Technologies, Inc.
1	Name	A****** A**
1	Telephone Number	26237********
1	Fax Number	262 3********
1	E-mail	a******@lairdtech.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C		923.30000000	927.50000000	0.5890000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BE49-X1CCAV2024030 GMSTEK, LLC O551753824 SWAGTEK EWQ500GTB Itron Inc 2BDVP-CTA2 Traintrackr LLC 2BLNN-LP233PRO ABrite Tech(Shanghai)Co.,Ltd.