Langogo Minutes Instruction manual SPEC Product Name: Langogo Minutes Product Size: 115 * 45.3 * 12.6mm Product Color: Gray Product Weight: 80g Touch Screen: 2.45-inch Touch Screen 432 *240P Retina Display Processor: MT6580 Quad-core Storage: 8GB Microphone: Dual Noise-cancelling Microphone Speaker: Hi-Fi Speaker with Power Amplifiers Battery: 1510mAh Operating Temperature: -10C 40C Operating Humidity: <70%
Charging Time: 2.5 Hours (5V 1A Charger) QUICK GUIDE 1. How To Use The Translation Function Press the button on the right side and hold to speak Release to hear the translation result One-button Translation: It will automatically recognize between the two selected languages and translate into another one. 2. More Information Visit www.langogo.ai/instructions.pdf for more instructions. LEARN MORE Thanks for using Langogo. Please visit www.langogo.ai for more product information. SUPPORT Please contact support@langogo.ai for more support. IMPORTANT 1. Please upgrade the system directly through the device settings. 2. Do not use the device in outdoor environment during a thunderstorm. 3. Please keep this device out of childrens reach. 4. Please note with the warning signs and comply with driving regulations and laws when using this device. 5. Please use the original battery, accessories and parts that come in the box. 6. Please take good care of the device to avoid any collision or damage. If damage is found, please immediately stop operation and contact the retailer for repair, otherwise it may result in injury such as electric shock. 7. Please keep the device dry. Do not touch it with wet hands. Keep liquids away from the device. 8. Do not use this device in places, such as petro stations or cabins, etc., where wireless devices like mobile phones, are prohibited with warning signs. 9. Please charge the battery in well-ventilated areas and away from flammable and explosive materials. 10. Please keep away from any ignition source, such as heating systems, heaters, ovens or open flames, etc. Avoid sun exposure. 11. Do not attempt to repair or disassemble the device. 12. Please use the original USB charging cable that comes in the box and refer to the charging specifications for charging. 13. The device must be charged in a ventilated environment of -40 ~ + 55 , and must use the qualified charger provided by the regular manufacturer. The use of an unapproved charger may be dangerous and will violate the approval and warranty terms of this device. 14. This product is not equipped with an adapter, adapter should meet the following requirements:
(1) The adapter shall have a national compulsory product certification.
(2) The output specification of the adapter should be DC 5V-1A.
(3) The output interface of the adapter is a Type-C USB interface. If the adapter does not meet the requirements above, following problems may cause:
(1) The device cannot be charged;
(2) The device has some faults, such as generate heat, crash, unable to turn on, etc.
(3) Battery life is shortened, battery generate heat, explosion, etc.;
DISCLAIMER We assume no responsibility for any damage or loss resulting from your failure to comply with instructions for use. HAZARDOUS MATERIALS Part Hazardous Materials or Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb)
(Hg)
(Cd) Chrome Diphenyl (PBB) Diphenyl Ethers Device x Data x o o o o
(Cr6+) o o o o
(PBDE) o o Cable O X Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product may not be collocated or operated in conjunction with any other antenna or transmitter.