FCC ID: UK2-MOD65412 60GHz Module set for Gigabit-Class Wireless Infrastructure Application

MOD65412 Wireless Link Module Set Preliminary Data Brief SB-DB-02006-0.80 February 2018 MOD65412 Wireless Link Module Set Preliminary Data Brief Copyright Notice Copyright 2018 Lattice Semiconductor Corporation. All rights reserved. The contents of these materials contain proprietary and confidential information (including trade secrets, copyright, and other Intellectual Property interests) of Lattice Semiconductor Corporation and/or its affiliates. All rights are reserved. You are permitted to use this document and any information contained therein expressly and only for bona fide non-commercial evaluation of products and/or services from Lattice Semiconductor Corporation or its affiliates; and only in connection with your bona fide consideration of purchase or license of products or services from Lattice Semiconductor Corporation or its affiliates, and only in accordance with the terms and conditions stipulated. Contents, (in whole or in part) may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior written permission of Lattice Semiconductor Corporation and/or its affiliates. Copyright infringement is a violation of federal law subject to criminal and civil penalties. You have no right to copy, modify, create derivative works of, transfer, sublicense, publicly display, distribute or otherwise make these materials available, in whole or in part, to any third party. You are not permitted to reverse engineer, disassemble, or decompile any device or object code provided herewith. Lattice Semiconductor Corporation reserves the right to revoke these permissions and require the destruction or return of any and all Lattice Semiconductor Corporation proprietary materials and/or data. Patents The subject matter described herein may contain one or more inventions claimed in patents or patents pending owned by Lattice Semiconductor Corporation and/or its affiliates. Trademark Acknowledgment Lattice Semiconductor Corporation, the Lattice Semiconductor logo, Silicon Image, the Silicon Image logo, Instaport, the Instaport logo, InstaPrevue, Simplay, Simplay HD, the Simplay HD logo, Simplay Labs, the Simplay Labs logo, the SiBEAM Snap, the SiBEAM Snap logo, UltraGig, the UltraGig logo, GigaRay and the GigaRay logo are trademarks or registered trademarks of Lattice Semiconductor Corporation in the United States and/or other countries. HDMI and the HDMI logo with High-Definition Multimedia Interface are trademarks or registered trademarks of, and are used under license from, HDMI Licensing, LLC. in the United States or other countries. MHL and the MHL logo with Mobile High-

Definition Link are trademarks or registered trademarks of, and are used under license from, MHL, LLC. in the United States and/or other countries. WirelessHD, the WirelessHD logo, WiHD and the WiHD logo are trademarks, registered trademarks or service marks of SiBeam, Inc. in the United States or other countries. HDMI Licensing, LLC; MHL, LLC; Simplay Labs, LLC; and SiBeam, Inc. are wholly owned subsidiaries of Lattice Semiconductor Corporation. All other trademarks and registered trademarks are the property of their respective owners in the United States or other countries. The absence of a trademark symbol does not constitute a waiver of Lattice Semiconductors trademarks or other intellectual property rights with regard to a product name, logo or slogan. Export Controlled Document This document contains materials that are subject to the U.S. Export Administration Regulations and may also be subject to additional export control laws and regulations (collectively Export Laws) and may be used only in compliance with such Export Laws. Unless otherwise authorized by an officer of Lattice Semiconductor Corporation in writing, this document and the information contained herein (a) may not be used in relation to nuclear, biological or chemical weapons, or missiles capable of delivering these weapons, and (b) may not be re-exported or otherwise transferred to a third party who is known or suspected to be involved in relation to nuclear, biological or chemical weapons, or missiles capable of delivering these weapons, or to any sanctioned persons or entities. Further Information To request other materials, documentation, and information, contact your local Lattice Semiconductor sales office or visit the Lattice Semiconductor web site at www.latticesemi.com. Disclaimers These materials are provided on an AS IS basis. Lattice Semiconductor Corporation and its affiliates disclaim all representations and warranties

(express, implied, statutory or otherwise), including but not limited to: (i) all implied warranties of merchantability, fitness for a particular purpose, and/or non-infringement of third party rights; (ii) all warranties arising out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that may be obtained from use of, the materials are accurate, reliable, complete, up-to-date, or produce specific outcomes. Lattice Semiconductor Corporation and its affiliates assume no liability or responsibility for any errors or omissions in these materials, makes no commitment or warranty to correct any such errors or omissions or update or keep current the information contained in these materials, and expressly disclaims all direct, indirect, special, incidental, consequential, reliance and punitive damages, including WITHOUT LIMITATION any loss of profits arising out of your access to, use or interpretation of, or actions taken or not taken based on the content of these materials. Lattice Semiconductor Corporation and its affiliates reserve the right, without notice, to periodically modify the information in these materials, and to add to, delete, and/or change any of this information. Products and Services The products and services described in these materials, and any other information, services, designs, know-how and/or products provided by Lattice Semiconductor Corporation and/or its affiliates are provided on AS IS basis, except to the extent that Lattice Semiconductor Corporation and/or its affiliates provides an applicable written limited warranty in its standard form license agreements, standard Terms and Conditions of Sale and Service or its other applicable standard form agreements, in which case such limited warranty shall apply and shall govern in lieu of all other warranties

(express, statutory, or implied). EXCEPT FOR SUCH LIMITED WARRANTY, LATTICE SEMICONDUCTOR CORPORATION AND ITS AFFILIATES DISCLAIM ALL REPRESENTATIONS AND WARRANTIES (EXPRESS, IMPLIED, STATUTORY OR OTHERWISE), REGARDING THE INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS PROVIDED BY LATTICE SEMICONDUCTOR CORPORATION AND/OR ITS AFFILIATES, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND/OR NON-INFRINGEMENT OF THIRD PARTY RIGHTS. YOU ACKNOWLEDGE AND AGREE THAT SUCH INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS HAVE NOT BEEN DESIGNED, TESTED, OR MANUFACTURED FOR USE OR RESALE IN SYSTEMS WHERE THE FAILURE, MALFUNCTION, OR ANY INACCURACY OF THESE ITEMS CARRIES A RISK OF DEATH OR SERIOUS BODILY INJURY, INCLUDING, BUT NOT LIMITED TO, USE IN NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION, EMERGENCY SYSTEMS, OR OTHER SYSTEMS WITH A SIMILAR DEGREE OF POTENTIAL HAZARD. NO PERSON IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PERFORMANCE OF THE INFORMATION, PRODUCTS, KNOW-HOW, DESIGNS OR SERVICES OTHER THAN AS PROVIDED IN THESE TERMS AND CONDITIONS. 2 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 1. General Description The Lattice MOD65412 Wireless Link Module Set is a two-board wireless link evaluation platform that includes a MOD65410 baseband board that conforms to the PCI Express (PCIe) Half-Mini Card specification and a MOD63422 RF board that includes a printed circuit board (PCB) antenna. The baseband board contains the SB6541 device, a single-chip IEEE 802.11ad-based baseband processor for industrial, and communication applications. The RF board contains the SiI6342 device, a 60 GHz RF transceiver for medium-range access, backhaul, and bridging applications. The baseband and RF boards are connected by a Flexible Printed Circuit (FPC) cable. The module set can be integrated with a host network processor via PCIe to provide wireless station (STA) or access point (AP) functions in a gigabit network link. 1.1. Applications Fixed wireless broadband backhaul and access Indoor/outdoor Wi-Fi wireless backhaul Indoor/outdoor 4G LTE small-cell wireless backhaul Municipal and Enterprise backhaul MOD65412 Wireless Link Module Set Preliminary Data Brief 1.2. Features IEEE 802.11ad single-carrier PHY MCS modes 1-8, with PHY data rate up to 2.3 Gb/s IEEE 802.11ad control PHY MCS mode 0 IEEE 802.11ad channels 2 and 3 (59.4 63.7 GHz) PCI Express 1.1 x1 interface to host system 1.7 Gb/s effective maximum bidirectional TCP/IP throughput Transmitter EIRP (typical) 37 dBm @ MCS4 Rx sensitivity (typical) 86 dBm @ MCS4 Dual firmware image support with 2 MB flash Adaptive beamforming with 45 steering angle

(-3dB point) Integrated EMI shield, heat sink and antenna on RF board simplify system integration Operating temperature range: 25 oC to +90 oC case temperature; start-up at 40 oC Board dimensions:

Half-Mini card (30 mm 26.8 mm 1 mm) RF board (64 mm 52 mm 8.2 mm) Linux driver supporting kernel version 3.10 to 4.0 Regulatory certification: FCC Figure 1.1. Typical Application SB-DB-02006-0.80 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL 3 MOD65410 Baseband BoardNetworkProcessorMOD63422RF BoardPCIeNetwork NodeNetworkProcessorPCIeNetwork NodeIP DataIP DataMOD65410 Baseband BoardMOD63422RF Board MOD65412 Wireless Link Module Set Preliminary Data Brief 2. System Description 2.1. Block Diagram The MOD65412 Wireless Link Module Set block diagram is presented below (Figure 2.1). Figure 2.1. Wireless Link Module Set Block Diagram 2.2. Baseband Board Dimensions The MOD65410 baseband board is a PCI Express Half-Mini Card. Refer to the PCI Express Mini Card Electromechanical Specification, Revision 2.0, for the bare PCB dimensions. The PCI Express system connectoris card edge is 0.8 mm pitch, 52 pins. The baseband board is 30 mm 26.8 mm 4.6 mm, with an EMI enclosure on the top side and without the FPC cable attached. The board is 30 mm 26.8 mm 5.1 mm with a standard height FPC connector attached. The two mounting screws are M2: ISO 7045:2011 M20.4 Pan head screws with type H or Z crosscut drive or M2.5: ISO 7045:2011 M2.50.45 Pan head screws with type H or Z crosscut drive. Figure 2.2. Baseband Board Mechanical Dimensions 4 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 SB6541Power Supply50-pin Connector50-pin ConnectorSiI6342P.S.1.8V1.1V1.0V3.3VauxPET0p/nPER0p/nREFCLK+/-W_DISABLE1#LED_WWAN#PERST#54MHzHSBUSRF I/QRF I/QHSBUSPCLKPCLK3.3VFlashSPIPCIe Mini-CardEdge ConnectorBaseband BoardRF Board50-pin Connector50-pin ConnectorGNDGNDGNDRST#FPC CableTX0-TX11RX0-RX11Antennas on PCB10.4528.6023.903.854.5015.60CN1Pin 12.40MAX1.000.10`1.20MAX8.2524.2030.00+ 0-0.3026.80+ 0-0.302.152xREFR0.802xMAX3.202xMIN4.000.10`1.500.10`n2.602x23.90 MOD65412 Wireless Link Module Set Preliminary Data Brief 2.3. RF Board Dimensions The MOD63422 RF board is 62.6 mm 51.6 mm 7.4 mm. The PCB bottom side is covered by a combination EMI shield/heat sink block. There are two M20.4 threaded screw holes in the heat sink for attaching a cable retention plate, if needed to prevent the FPC cable from working loose due to shock and vibration. There are four holes in the PCB and heat sink that can be used to mount the module to the system assembly. These holes are 2.4 mm in diameter. M2 wafer head screws are recommended for mounting the module to the system. The four mounting screws are M2: ISO 7045:2011 M20.4 Wafer head screws with type H or Z crosscut drive. Figure 2.3. RF Board Mechanical Dimensions 2.4. Baseband and RF Board Interconnect The baseband and RF boards each have connectors for FPC cable. On the baseband board Description: Dual row board-to-board socket, 0.4 mm pitch, 50 pins, 1.5 mm stacking height Connector type: Hirose DDF40C series Part number: DF40C-50DS-0.4V(51) On the RF board Description: Dual row board-to-board plug, 0.4 mm pitch, 50 pins, 1.5 mm stack height Connector type: Hirose DF40C series Part number: DF40C-50DP-0.4V(51) The FPC cable has mating connectors on each end. Connector types: Hirose DF40C series Part numbers:DF40C-50DP-0.4V(51) on the baseband board end DF40C-50DS-0.4V(51) on the RF board end For technical details of the connectors, refer to the information provided by the manufacturer at https://www.hirose.com/product/en/products/DF40/

SB-DB-02006-0.80 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL 5 51.6046.4062.6057.402.602.6025.8031.30RX Antenna ElementsTX Antenna Elements4x M2x0.4-5 Wafer Head Cross-drive ScrewsCenter of SiI6342IZU IC5.001.600.620.809.3044.002.4046.8047.8031.3012.1012.108.304 x 2.40 THRUnx2 x M2x0.4 THRUxJ1Pin 12.505.0036.0019.00q MOD65412 Wireless Link Module Set Preliminary Data Brief 2.5. Board Interconnect Cable MOD65412 Wireless Link Module Set uses an FPC cable to connect high speed signals between the baseband board and the RF board. This implementation of the FPC interconnect is 150 mm long, with board-to-board connectors at either end. The cable is folded to connect the baseband board inside the host system to the RF board mounted on an exterior surface of the host system. The FPC has two layers, with all signals routed on one layer and a ground plane on the second layer. The construction of the FPC cable is shown in Table 2.1 below. The geometry used with this implementation is 165 m traces for single-ended 50 signals and 100/100/100 m trace/space/trace for 100 differential signal pairs. In designing a system specific FPC cable, care must be taken to match the trace lengths of the two signals in a differential pair as closely as possible. In addition to matching pair trace lengths, the lengths of the TXI/TXQ pairs must be matched, the lengths of the RXI/RXQ pairs must be matched, and the lengths of the HSD[0-3]/HSCS/HSCLK pairs must be matched. The cable included with the Starter Kit matches differential pair trace lengths and group trace lengths to <5 m. Table 2.1. FPC Interconnect Cable Cross Section Circuit Layer Thickness 12.5 Top Bottom Total thickness 15 34 20 50 20 34 15 12.5 213 Unit m m m m m m m m m m Material Polyamide Adhesive Copper Adhesive Polyamide Adhesive Copper Adhesive Polyamide FPC Construction Top Coverlay Double-sided FPC Bottom Coverlay 6 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 MOD65412 Wireless Link Module Set Preliminary Data Brief Figure 2.4. FPC Interconnect Cable Schematic Figure 2.5. FPC Interconnect Cable Mechanical Dimensions SB-DB-02006-0.80 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL 7 RST_NHSD0_NHSD0_PSTBYHSDOUTRXI_NRXI_PTXQ_PTXQ_NTXI_NTXI_PRXQ_NRXQ_PPCLK_NPCLK_PHSD2_PHSD2_NHSD1_NHSD1_PHSD3_NHSD3_PHSCLK_NHSCLK_PHSCS_PHSCS_NHSD0_PHSD0_NHSCLK_NTXI_NTXI_PRXI_PHSCLK_PTXQ_NTXQ_PRXI_NRXQ_PRXQ_N3V3J1DF40C-50DP-0.4VHIROSE_DF40C-50DP123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354J2DF40C-50DS-0.4VHIROSE_DF40C-50DS1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950Baseband Module End of CableRF Module End of CableA1507.53.47.5153.4Pin 1Pin 1J1Baseband Board EndJ2RF Board End1588150.20.3Detail AScale 2:1 MOD65412 Wireless Link Module Set Preliminary Data Brief 3. Electrical Interface This section describes the Electrical Interface between the module set and the host system. The system connector is a 52-pin card edge connector that is compliant with the PCIe Mini Card specification. Refer to the PCI Express Mini Card Electromechanical Specification, Revision 2.0, for complete details on the card form factor and interface signals. 3.1. Pin Out Direction Description Function Group I I O O I I O I I O PCI Express differential transmit pair PCI Express differential receive pair PCI Express differential reference clock (100 MHz) System data/control System data/control System data/control Reference clock request Functional reset to the module System control System control Radio operation disable signal System control LED control signal to indicate radio enabled for transmitting System control 3.3 V source Module power Ground Module power Signal Type 31 Pin Number Table 3.1. System Interface Pin Out Name PETn0 PETp0 PERn0 PERp0 REFCLK-

REFCLK+

33 23 25 11 13 LVCMOS LVCMOS Open-Drain 3.3V tolerant Open-Drain 3.3V tolerant 3.3 V 5%, 1 A Electrical Ground CLKREQ#

PERST#

W_DISABLE1#

LED_WLAN#

3.3Vaux GND RSVD/NC 7 22 20 44 2, 24, 39, 41, 52 4, 9, 15, 18, 21, 26, 27, 29, 34, 35, 37, 40, 43, 50 1, 3, 5, 6, 8, 10, 12, 14, 16, 17, 19, 28, 30, 32, 36, 38, 42, 44, 45, 46, 47, 48, 49, 51 N/C Card edge pins not used by module Reserved pins The PET and PER differential pairs are named from the system board point of view. The PETp0 and PETn0 pins are connected to the PCI Express transmitter differential pair on the system board and to the PCI Express receiver differential pair on the SB6541 device on the baseband board. The PERp0 and PERn0 pins are connected to the PCI Express receiver differential pair on the system board and to the PCI Express transmitter differential pair on the SB6541 device on the baseband board. 8 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 3.2. Description MOD65412 Wireless Link Module Set Preliminary Data Brief 3.2.1. 3.3 V The PCI Express Mini Card edge connector supplies 3.3 V power to the module set. Due to the nature of the wireless power optimization implemented in this module set, the average power consumed by the module is much lower than the peak power, which is transient. Parameter Value Power Input VIN Max Input Voltage Ripple Max Power Typical Power (at MCS6) Idle Power 3.3 V DC, 1.1 A 9%

Baseband: 1.0W, RF: 2.7W Baseband: 0.7W, RF: 1.5W Baseband: 0.6W, RF: 0.9W 3.2.2. GND These pins provide the common power and signal ground returns for the module. 3.2.3. PCI Express x1 Lane The PETp0/PETn0 and PERp0/PERn0 differential pairs make up a 1 PCI Express Lane that are the primary means of communicating with and controlling the module setMOD65412 Wireless Link Module Set. The signals are named with respect to the host platform. The PETp0/PETn0 signals are the input pair and are connected to the receiver pins on the SB6541 device on the baseband board. The PERp0/PERn0 signals are the output pair and are connected to the transmitter pins on the SB6541 device through DC-blocking capacitors. 3.2.4. Reference Clock The REFCLK+/REFCLK- differential pair is an input to the baseband board. The reference clock is a 100 MHz clock used to assist the synchronization of the SB6541 device PCI Express interface timing circuits. The reference clock is required by the SB6541 device for proper operation. 3.2.5. CLKREQ#

The CLKREQ# signal is an active low output from the baseband board. It is used by the baseband board to request that the host platform supply a PCI Express reference clock. The baseband board ties this signal low through a 1 K pull-down. 3.2.6. PERST#

The PERST# signal is an input to the baseband board. It is used by the host platform to indicate the system power source state and to force a hardware reset on the module. The host platform de-asserts (drives high) the signal when the system power sources are stable and within tolerance specifications. The host platform asserts (drives low) the signal when the system power is turned off or goes out of spec. 3.2.7. W_DISABLE1#

The W_DISABLE1# signal is an active low input to the baseband board. The host platform can use this signal to indicate to the baseband processor that the radio should be disabled. 3.2.8. LED_WWAN#

The LED_WWAN# signal is an active low output from the baseband board intended to drive an LED indicator on the host platform. It is used to indicate when the module has enabled the radio for transmission. SB-DB-02006-0.80 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL 9 MOD65412 Wireless Link Module Set Preliminary Data Brief 4. Grants and Labeling The MOD65412 Module Set is subject to modular approval in regulatory regions. The United States of America (FCC) is the first region that the module is certified. In order to comply with radiation exposure limit set by the FCC, the system where the module is installed must operate at a distance of 30 cm away from any person. It is under such condition that the system integrator can use the MOD65412 modular grant. The MOD65412 modular grant covers three components of the module: the baseband board, the RF board, and the FPC cable. The grant allows the system integrator to use different lengths of the FPC cable between 75 mm and 250 mm to meet specific system design requirements. The FPC cable reference design can be obtained through Lattice Semiconductor sales representatives. The following grants have been issued for the MOD65412 module set:

Model: MOD65412:

FCC (USA): UK2-MOD65412 4.1. Module Label Examples The labels attached to the model set provide identification and traceability in addition to displaying regulatory grants. Example labels are shown below. The exact layout may differ, but all important information should be displayed clearly. Figure 4.1. Example Label on MOD63422 10 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 Lattice Semiconductor CorporationBAR CODE AREAMade in CountryODM or OEM marks: for example Lot number, Product ID15 mm38 mmLabel Color: WhiteText Color: BlackMaterial: adhesive and Time Resistant (Polyester)2115 ONel Drive San Jose, CA 95131, USAPN: MOD63422OPN: MOD63422LABEL MOD65412 Wireless Link Module Set Preliminary Data Brief Figure 4.2. Example Label on MOD65410 SB-DB-02006-0.80 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL 11 Lattice Semiconductor CorporationBAR CODE and MAC address AreaMade in CountryODM or OEM marks: for example Lot number, Product ID14 mm28 mmLabel Color: WhiteText Color: BlackMaterial: adhesive and Time Resistant (Polyester)2115 ONel Drive San Jose, CA 95131, USAOPN: MOD65412 (MOD63422 + MOD65410) PN: MOD65410FCC ID: UK2-MOD65412LABEL MOD65412 Wireless Link Module Set Preliminary Data Brief Ordering Information Device Lattice GigaRay Module Set Ordering Part Number MOD65412 12 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 Appendix A. OEM Installation Interference Statement A.1. USA - Federal Communications Commission (FCC) MOD65412 Wireless Link Module Set Preliminary Data Brief This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 1. 2. 3. 4. 5. 6. 7. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate warranty and all applicable regulatory certifications and approvals. Caution: Exposure to Radio Frequency Radiation: The installer of this radio equipment must place the module inside the enclosure of a stationary system intended to operate 30 cm away from the end user body in typical operation. This implies that this module shall not be integrated in battery operated devices, handheld devices, wearable accessories for example. The antenna(s) used for this transceiver must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Other antennas shall be installed with a minimum 30 cm separation from the 60 GHz device antenna present in this module. Caution: User is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC rule 15.255(a) prohibits the use of this device on aircrafts or satellites. This module is intended for the OEM integrator. Additional note to System Integrator/OEM:

The regulatory label on the final system must include the exact statement:

Contains FCC ID: UK2-MOD65412 on the enclosure SB-DB-02006-0.80 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL 13 MOD65412 Wireless Link Module Set Preliminary Data Brief Revision History Revision 0.80, February 2018 First preliminary release. 14 2018 Lattice Semiconductor All rights reserved. CONFIDENTIAL SB-DB-02006-0.80 7th Floor, 111 SW 5th Avenue Portland, OR 97204, USA T 503 268 8000 www.latticesemi.com