FCC ID: 2AZDN-SBCHAM Chameleon

Gateway Setup MANUAL 01 Whats in the box?

The product package should contain the following items:

- Syncrob.it HNT Gateway

- An AC power adapter (varies by region)

- 3dbi Lora antenna (varies by region)

- Ethernet cable Optional Accessories:

- 6 dbi Antenna

- Antenna Cable

- Mounting Bracket If any of the parts are incorrect, missing, or damaged, contact SyncroB.it via email at support@syncrob.it. Keep the carton, including the original packing materials, in case you need to return the product for repair. 02 Gateway Setup Manual 02 The Front of the Gateway You can use the status lights on the front of the gateway to verify various conditions. White (Blinking) - Powered up Green (Steady) - Ready Yellow (Blinking) - Connected to Wi-Fi/Ethernet Amber (Progress) - Syncing blockchain Cyan (Blinking) - Firmware update Red (blinking) - Error Magenta (Blinking) - Rebooting NOTE: The 6th LED will turn steady blue while pairing mode is active. 03 Gateway Setup Manual 03 The Back of the Gateway 1. USB OTG Port (Mirco USB) 2. Power adapter port 3. Soft reboot button 4. Antenna port 5. Ethernet port 04 Preparing your Gateway for Setup 1. Carefully screw in the provided 3dbi antenna (See Figure 3). 2. Find a suitable location for your Gateway (for optimal coverage we recommend placing the unit near a window and close to a power source). 3. If you are using ethernet connection, locate the ethernet port on the back of your gateway and securely insert ethernet cable. (See Figure 4) 4. Power the gateway with the included power adapter. 5. Allow the unit a few seconds to power on. LED strip should begin blinking white. figure 3 figure 4 04 Gateway Setup Manual ! Warning Please remember to follow the following steps when using your SyncroB.it Gateway. 1. Never power on the Gateway without its antenna connected as this may damage the unit. 2. Do not install this device on top of any other electrical equipment or install any other equipment on top of this device. Keep this device away from any heat sources such as direct sunlight, heaters, radiators, or other A/V receivers or devices that emit heat. 05 Setting up your Gateway Download and install the Helium application from App store or Play store and follow the on-screen instructions. Once you have set-up your Helium wallet, go to hotspots and tap setup hotspots (See Figure 5), from the list select SyncroB.it Hotspot (See Figure 6) and follow the onscreen instructions. figure 5 figure 6 figure 7 Download Helium App 05 Gateway Setup Manual FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

The equipment comlies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and This devices contains BT and WIFI transmitter module FCC ID: 2ABCB-RPIRM0 your body 06 Gateway Setup Manual P.O. Box 635 Shepherdsville, Ky 40165 USA support@syncrob.it https://syncrob.it/contact/

Appendix FCC ID Label FCC ID: 2AZDN-SBCHAM TB-RF-074-1.0 Appendix ID Label Location ID LOCATION FCC ID: 2AZDN-SBCHAM TB-RF-074-1.0

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-6-26>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AZDN-SBCHAM Model name CH-23 For the product stated above, we request that the following information be held confidential;

Exhibits Short-Term Confidentiality Long-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Candi MAY/CEO Launch Pad LLC Company:

358 Westside Drive, Shepherdsville KY 40165 USA Address:

5024199036 Phone:

N/A Fax:

george@syncrob.it E-Mail:

Launch Pad LLC 358 Westside Drive, Shepherdsville KY 40165 USA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2021-6-26 We, Launch Pad LLC the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AZDN-

SBCHAM including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Candi MAY/CEO Launch Pad LLC 358 Westside Drive, Shepherdsville KY 40165 USA 5024199036 N/A george@syncrob.it