FCC ID: 2ARVCKS NOTE SORTER

Note FCC Label in the Machine Request from Us 1. It is strictly prohibited to use part or this entire instruction to other publication without permission of the publisher. 2. The contents of this instruction and the specification of the machine may change without a preliminary notice for future improvement. 3. Please contact to the regional distributor of LAUREL, if there are any doubtful points, or errors, etc. in this instruction. 4. It is understood that LAUREL will not be responsible for any losses caused by use of the machine, or regardless of any errors in the instruction. 5. The illustrations in this instruction may differ from the actual machine as they are abstract. 6. The display screen illustrated in this instruction may differ from an actual dis-

play screen. 7. Please contact a regional distributor of LAUREL if the manual has disorderly binding or missing pages. 8. Please contact a regional distributor of LAUREL for loss or damage of the in-

struction. FCC Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Notice This machine has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio com-

munications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the operator will be required to correct the interference at operators own expense. 1 2 1 2 Ks Series Safety Instructions &

Quick Reference This Instruction describes how to use the machine and precautions for your safe use. Please read carefully and understand this instruction before operating the machine. Keep this Instruction handy for ready reference. 1TA00R10000AA-C Safety Caution Safety Caution This instruction is used to follow symbols to make you cautious in order to use the machine safely and to prevent you from a risk of an injury or from losing your property. It describes contents of danger and/or how to prevent the danger together with marking which indicates contents of the danger near the symbols. Please read through this instruction to understand the meanings of symbols and markings before use. Description of Warning, Caution and Examples In case the machine is wrongly operated without respect to this icon, there is a possibility of fatal or serious injury to the operator. In case the machine is wrongly operated without respect to this icon, there is a possibility of injury or material phys-

ical damage to the machine. Description of Symbol and Examples This symbol warns of electric shock. This symbol warns the op-

erator to be cautious not to pinch a finger etc. In case of handling without care, there is a risk of injury. This mark requires all power plug be removed before tak-

ing necessary action. This mark instructs you to connect earth wire to the proper grounding. This mark indicates an action must be carried out. This figure symbol indicates prohibited acts. This symbol warns the oper-

ator not to disassemble the machine. There is a risk of danger. This symbol warns possibility of fire and smoke. If smoking, abnormal smell, noise is detected from the machine, stop the operation and pull out the plugs from outlet. Then contact a regional distributor of LAUREL. Without respect to this caution, there is risk of failure, an electric shock or a fire. If a liquid is spilled over the machine or metal, burnable material are dropped inside of the machine, do not use the machine. Pull out the plug from outlet and contact a regional distributor of LAU-

REL. Otherwise, there is a risk of an electric shock or a fire. Make sure to connect earth wire to the proper grounding. Otherwise, there is a risk of an electric shock. Do not install the machine at a moist area, dusty or any place for handling water. There is a risk of an electrical shocks and a fire. Do not use the Power Cable which is not for the machine. There is a risk of failure, an electric shock or a fire. The Power Cable enclosed in the box is exclusive for the machine. Use the cable for the machine. Otherwise there is a risk of failure, an electric shock or a fire. Make sure the machine has stopped completely before accessing inside the machine. Otherwise, there is a risk of an injury. Hold the specified part when opening and closing doors and be sure not to pinch your finger. Otherwise, there is a risk of an injury. This machine is not suitable for use in places where children may possibly be located. Do not disassemble the machine except having been instructed in the instruction. There is a risk of an electric shock and a fire. Although it is a heavy machine, it is installed on a table, so place it on a desk with sufficient strength so that it is not placed on an unstable place. Safety Caution Power Cable Notice Please use the power code which is enclosed with the machine or please use the one with the below mentioned specifications. Rated voltage above the power supply voltage used. Rated current that is higher than the rated current of the machine described in the manufacturing nameplate. Supports safety certification required in the country of use. The shape of the connector connected to the machine conforms to

"IEC-60320-C13". To prevent the Power Cable from bending or putting a burden on the Power Cable connection, please use a Power Cable whose connection shape matches the installation location. If any other than the above is used, smoke, fire, electric shock, machine failure may occur, and the authorities may give guidance. If you do not use the machine for long time, Please be sure to turn off the Power Switch. When turning on and off the Power Switch, Please take a time interval of 5 seconds or more. Handle the machine with care. Do not strike or shake the machine. Close all doors before start operation. Press the keys or switches gently. About the Installation of the Machine Please avoid high temperature, high humidity, dust, vibration, and direct sunlight. In case the environment of operation exceeds room temperature (5C to 35C) and humidity (35% to 80%), the performance of the machine will deteriorate re-

markably. Please use an air-conditioner, a humidifier, etc. in case of above conditions. About Dew Condensation In case the machine is installed to places where are high humidity or move from the place is cold to warm, may cause to the dew condensation. In case the dew condensation, please leave the machine for hours at the place where you use, and turn on the Power Switch after that. Installation, Transfer In order to have correct function of the machine, it is necessary to have appropri-

ate adjustment for Installation and Transfer. Do not remove the Ferrite Core. The optional Customer Display must be connected using the attached cable. When you install or transfer this machine, please contact a regional distributor of LAUREL. Handle the Machine with Care Children Since this machine is the business and the industrial device, it is not suitable to be used in places where children may possibly be located. Caution Mark in the Machine The safety caution labels are attached to the place which is hazardous area in the machine. These labels reminds an operator conscious of the danger while operating the machine. If the caution label is unreadable, peeling off and/or stain, please contact a re-

gional distributor of LAUREL. Dangerous to touch the rollers. Dangerous to touch the rollers. Dangerous to touch the rollers. Dangerous to touch the rollers. Be careful when touching the knob. Name of Each Part Quick Instruction Guide Function Description of Sort Mode Touch "?" to display the operation description. Fitness Mode 9 ON OFF 1 1 2 3 4 5 6 7 8 1 Upper Cover 7 Dust Tray1 2 Sub-Front Cover 8 Dust Tray2 3 Sub-Display 4 Status LED 5 Pocket 6 Main-Display 9 Reject Pocket Power Switch Hopper 1 2 3 Sorting out Fit notes and Unfit notes. In case the banknotes are mixed, the 1st counted Note will be the target for sorting. ATM Mode Sorting out ATM notes. In case the banknotes are mixed, the 1st counted de-

nomination will be the target for sorting. Sort Mode Sorting out denomination. Face/Orient Mode Sorting out banknotes based on Facing and Orientation. In case the banknotes are mixed, the 1st counted denomination will be the target for sorting. Issue Mode Sorting out New and Old banknotes based on issue. In case the banknotes are mixed, the 1st counted denomination will be the target for sorting. Description of Status LED LED indicates notes category by color of lights. Status LED Sort Mode Blue Green Orange Red Fitness Fit notes Unfit notes Suspect notes ATM Sort ATM notes Single Denomination Circulated notes Mixed Denomination Face/Orient Genuine notes Unfit notes Suspect notes Suspect notes Suspect notes Issue New notes Old notes Before 2Generations Suspect notes How to Open the Guides and Validator How to Open the Guides and Validator How to Open the Guides and Validator Space for the Installation, Space for the Operation Guide 1 Validator Guide 5 Guide 2 Guide 4 Guide 6 Guide 3 Guide 4 2 3 2 1 1 3 Guide 7 170 1000 680 150 0 5 Installation Space Operation / Maintenance Space 0 0 4 0 1 5 0 6 0 1 1 1 0 0 6 0 9 9 2 1 Unit : mm

| FCCID: 2ARVCKS |

i This device complies with part 15 of the FCC Rules, Operation is subject fo the following two conditions: (1) This i OSviCe May Nol CAUSE NAN IMLererence, and (2) iS GeVice MUS! BCOSP! any INLEMEPence FeCeiVved, INCILGIMg interference that may cause undesired operation.

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN Letter of Authorization Date: June 4, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: LAUREL PRECISION MACHINES Co., LTD FCC ID: 2ARVCKS To whom it may concern:

We, the undersigned, hereby authorize Rie Fujiwara of Consumer Technology Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Tomoaki hwo. bu hi Tomoaki Iwabuchi LAUREL PRECISION MACHINES CO., LTD

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN Request for Class II Permissive Change June 4, 2021 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 FCCID :2ARVCKS Applicant: LAUREL PRECISION MACHINES CO., LTD To Whom It May Concern:

This is to request a Class II permissive change for FCC ID: 2ARVCKS, originally granted on December Tecan the following points from the original model.

* DB PCB

* Customer display Please refer to attached Theory of Operation-Differences for details of these modifications. Meanwhile we submit the following documents related to this change. There is no change before and after change except for these documents. Ex] | Test Report RF Exposure External Photo Be Internal Photo User Manual Label Drawing/ Location

Block Diagram Specification Schematic Diagram Parts List This time, we performed the testing and confirmed that this product still meets the minimum requirements of the applicable rules of FCC. Please refer to the test report submitted with this application. Thank you for your attention to this matter. Sincerely, Tenoa ki Twa bua i Tomoaki Iwabuchi LAUREL PRECISION MACHINES CO., LTD

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN About the test report Date: June 1, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: LAUREL PRECISION MACHINES CoO., LTD FCCID :2ARVCKS To whom it may concern:

There are 4, 8, 12, 16, 20, 24 pocket products in the product series, but the tests are conducted on the 24 pocket products. This is because we have determined that 24 pockets is the worst possible condition, since the additional pockets do not regulate the operation, but rather the load increases with each additional pocket and the noise emitted increases with it. Sincerely, Tomoaki Jwabuchi Tomoaki Iwabuchi LAUREL PRECISION MACHINES CoO., LTD

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN Request for Confidentiality Date: June 4, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: LAUREL PRECISION MACHINES CO., LTD FCCID :2ARVCKS To whom it may concern:

Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459:

Block Diagram Theory of Operation Schematics The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Teme ak) Tveelats oh i Tomoaki Iwabuchi LAUREL PRECISION MACHINES CoO., LTD

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN Request for Short-Term Confidentiality Date: July 26, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID :2ARVCKS Applicant: LAUREL PRECISION MACHINES CO., LTD To whom it may concern:

Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459:

External Photos Internal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, a IN

/ CINOCK | we pu Tomoaki Iwabuchi LAUREL PRECISION MACHINES CoO., LTD

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN Special Power of Attorney To whom it may concern:

I, Keisuke Satou of LAUREL PRECISION MACHINES CO., LTD hereby appoint Tomoaki Iwabuchi of LAUREL PRECISION MACHINES CO., LTD to represent me to act on my behalf to do any and all of the following:

Sign the following documents on my behalf and apply to FCC for the products

- Letter of agency and anti-drug

- Confidentiality cover letters

- Any other application document that requires a signature by grantee. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effective from September 29, 2020 unless specifically extended or terminated by either party. Date: September 29, 2020 Place: Japan ji Re EB i Keisuke Satou LAUREL PRECISION MACHINES CoO., LTD

LAUREL LAUREL PRECISION MACHINES CO., LTD. 12-6, HIGASHITABATA 1-CHOME, KITA-KU, TOKYO 114-0013, JAPAN Date: September 29, 2020 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: LAUREL PRECISION MACHINES CO., LTD FCC ID: 2ARVCKS To whom it may concern:

We, the undersigned, hereby authorize Rie Fujiwara of Consumer Technology Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, SHR AAA Tomoaki Iwabuchi LAUREL PRECISION MACHINES CO., LTD