FCC ID: 2AIVH-GC730692 Zentoy

Congratulations Quick Notes Before Use Control Button Welcome to a world of sensational pleasure. Zentoy, a premium, high quality pleasure device lies at your ngertips. We made it from the nest materials and gave it a unique, proprietary design that departs from anything you have ever experienced. Plus it is really simple to use, featuring a single multifunctional button, so you can concentrate on whats really important: pleasure. Enchance your experiences by using Zentoy mobile applications, available at Apple Store and Google Play. Before you embark on your rst pleasure trip, we advise you to quickly go through this manual. For the full manuals and FAQ please visit: zentoy.com The Zentoy Team

- Clean your Zentoy before use.

- Hold the button for 3 seconds to turn it ON or OFF. Each button press rotates to the next mode.

- Do NOT bend over 30 Degrees.

- Already charged, but you can fully charge for optimum results. Charging time varies from 50 to 100 minutes. Delivers up to 2 hours of pleasure.

- The noise created when shaking the Zentoy is because of a Zenball included at the tip for optimum sensations and balanced vibes.

- To charge your Zentoy, attach the DC pin to the DC socket. You should feel a subtle click. Connect the other end to a USB charging plug.

- While charging, the LED light will turn blue. When the battery is full, the LED light will turn o.

- Charging time varies from 50 to 100 minutes. Do not charge for more than 24 hours at a time.

- Only use original Zentoy chargers.

- Charge and use your Zentoy at temperatures between 5 and 35 C (41 - 95 F).

- 4 pre-insralled vibration modes plus an Idle mode. First mode is the Idle mode. 5 additional fully customizable vibration modes are accessible through the Zentoy Play Mobile Application.

- If Zentoy remains in Idle mode for more than 3 minutes, it automatically turns o to save battery.

- Use only silicone-free lubricant when needed.

- 100% waterproof. Safe to submerge in bathtab and wash.

- 100% body safe silicone.

- Download the complementary Zentoy Mobile Apps for remote control and customisation of the vibration modes. Clean & Care

- Clean before and after each use. It is advised to use the Zentoy Clean Foam for maximum results. Alternatively you can use mild soap and warm water.

- Store in provided case to keep clean and safe.

- Do NOT use any of the following products with Zentoy as this could make the device permanently tacky and/or cause skin irritation:

silicone-based lubricants, massage oil, hand cream, cleansers containing alcohol or petrol or acetone.

- A long press for 3 seconds will turn it ON or OFF. A short vibration buzz will indicate that the action is registered and that the button can now be released.

- When the device is ON, short button presses (less than 3 seconds) will advance forward through operation modes in a cyclic order.

- The rst mode is the Idle mode. Press a second time for the vibrations to start. If Zentoy remains in Idle mode for more than 3 minutes, it automatically turns o. Your Zentoy features 9 vibration modes, called Zenvibes, plus the Idle mode. On a new Zentoy, modes 5 to 9 are left empty. You can record your Zenvibes and upload them to your Zentoy using the Zentoy Play Mobile Application. Zentoy talks to you via a light indicator. Blue light White light White light slow ashing White light constant White light fast ashing Zentoy charging Zentoy ON Zentoy in idle mode Zentoy in any active mode Low battery, recharge 2016 Lavme Inc - All rights reserved. Designed and Developed by Lavme Inc in USA. Manufactured in PRC. Play Safe Zentoy Play Specications

- Keep out of reach of children.

- Intended for people aged 16 or older.

- Do NOT use in areas that are irritated, swollen, inamed or have skin lacerations.

- Consult your physician if you are pregnant or if you are shortly after birth.

- Stop using your Zentoy if you experience discomfort.

- Do not use your Zentoy if any of the components are damaged.

- In the unlikely case unusual sounds occur, turn your Zentoy o and contact us at support@zentoy.com

- NEVER leave your Zentoy in direct sunlight or UV light.

- Your Zentoy is 100% waterproof. Can be used in bathtub.

- Keep your Zentoy charged over 50% for optimum battery life time.

- Your Zentoy utilizes an integrated Lithium Polymer accumulator and must NOT be burned, dismantled or exposed to temperatures above 60 C (140 F). Risk of battery explosion.

- Do NOT Drop your Zentoy.

- Do NOT Microwave or Boil your Zentoy.

- Do NOT Overheat your Zentoy. Zentoy Play Application will enable you to fully control your Zentoy directly through your Bluetooth enabled Smartphone. You can play live and/or create, save and transfer custom vibration patterns. The complementary Zentoy Play and all Zentoy Mobile Applications are available for iOS and Android devices. Visit www.zentoy.com to nd out more. Materials: Medical grade silicone and ABS body safe plastic Dimensions: 22cm x 5.1cm x 3.3cm (8.7in x 2.0in x 1.3in) Silicone Length: 11cm (4.3in) Battery: Li-Po 400mAh, 3.7V Charging: 1hr at 5.0V, 400mA Runtime: Up to 2hrs 100% Waterproof Support Warranty In the rare case you face problems with this device, contact our support team at support@zentoy.com. Zentoy comes with 2 year Limited Warranty Please visit www.zentoy.com/warranty for more details. Never attempt to open or repair this device by yourself, as this will void your warranty. My Zentoy does not turn on I hear a noise when I shake my Zentoy My Zentoy makes strange sounds My Zentoy heats up while charging I charge but it does not turn on The app cannot connect to my Zentoy Charge A Zenball exists in the tip. Turn OFF. Contact us Unplug immediately. Contact us Contact us Refer to the online manual Disposal Electronic equipment. Not to be treated as household waste. Dispose of properly. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Disclaimer Use this product at your own risk. Neither Lavme Inc. nor its retailers assume any responsibility or liability for the use of this pleasure object. Lavme Inc reserves all rights to implement technical changes that serve the improvement of the device as well as changes to the design. The grantee is not responsible for any changes or modications not expressly approved by the party responsible for compliance. Such modications could void the users authority to operate the equipment. FCC ID: 2AIVH-GC730692 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

LAVME INC 3500 S.Dupont Hwy, Dover, 19901, Delaware USA, +1 408 2151566 File Name 2AIVH-GC730692 BlkDia.pdf 2AIVH-GC730692 Schem.pdf 2AIVH-GC730692 OpDes.pdf Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AIVH-GC730692 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, LAVME Inc

-------------------------------

Theodoros Kyrios CEO

LAVME Ine 3500 S.Dupont Hwy, Dover, 19901, Delaware, USA 26 Jun 2016 Equipment Authorization Division Office id Engineering and Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Dear Sirs:

LAVME Inc requests acceptance of the labeling proposal described below for Zentoy bearing FCC ID: 2AIVH-GC730692. The subject Zetnoy model as shown in Figure 1, authorized under FCC Part 15 Subpart C LAVME Inc 3500 S.Dupont Hwy, Dover, 19901, Delaware, USA The surface of the device is not enough to indicate the FCC statement. For this reason, LAVME Inc proposes those statements to be shown on the user manual and the device to carry the FCC ID number only. Figure 2. is showing the FCC ID llocation. Figure 2. Sincerely, LAME Inc Theodoros Kyrios CEO

3500 S.Dupont Hwy, Dover, 19901, Delaware USA, +1 408 2151566 LAVME INC FCC ID: 2AIVH-GC730692 POWER OF ATTORNEY June 23, 2016 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize CMA Industrial Development Foundations Limited

(Andrew Wong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CMA Industrial Development Foundation Limited (Andrew Wong) on our behalf shall have the same effect as acts of our own. This authorization expires one year from original date. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, LAVME Inc, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, LAVME Inc

-------------------------------

Theodoros Kyrios CEO