WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Distribution: Internal Status: Confidential External Restricted Extended e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D TITLE: WUS MOTO Mounting process mode Reference :
C 307 020 0010 Version E2 Author D. LUCE (MD) 06/09/16 Name and Department Date Signature Internal Approval Check S.BAIGET (SY) Approver P. GABAUDAN (PL) C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 1/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 VERSIONS HISTORY Modification origin Author Comments Initial version all OEM version Creation Detailled procedure Screwing profile Screwing profile Screwing tool Screwing procedure Screwing procedure Merge between 3080820010-A6 and S 307 020 0010-A2 Adding C for customer document. Spec for new L valve Gen2 Tire ease recommendation and maximum speed Recommendation on rim interface Scheme adapted to 50 Update Pictures Warning FCC part 15/ RSS T. Benard T. Benard T. Benard D.Luce D.Luce D.Luce D.Luce L.Lafranchis T. Benard D.Luce D.Luce D.Luce D.Luce L.Lafranchis D.Luce e b t o n n a c d n a t n e s n o c n e l y g o o n h c e T
-
L D L f t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D A0 A1 A2 A3 A4 A5 A6 B0 B1 B2 C0 D0 E0 E1 E2 Version Update Date Chapters /
Pages modified 13/05/08 All 14/05/08 All 05/08/08 12 12 25/08/08 12 14/09/08 25/09/08 7,9,10,11,12 06/01/09 Title 08/01/09 All 01/09/09 1 05/10/09 All 22/10/10 6,12 21/05/13 6 05/08/13 all 31/01/14 All 6 06/09/16 C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 2/ 24 Copyrights 2016 Toulouse France e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 5.WUS MOUNTING 3.DESCRIPTION 4.UTILISATION RULES Table des matires 1.PURPOSE 2.TERMINOLOGY, ACRONYMS AND ABBREVATIONS
................................................................................................................................... 4
............................................................... 4 2.1.Terminology...........................................................................................................................4 2.2.Acronyms..............................................................................................................................4
............................................................................................................................ 5
.................................................................................................................. 5 4.1. Specifications.......................................................................................................................6
........................................................................................................................ 6 5.1.Precautions during mounting operation................................................................................6 5.2.WUS mounting......................................................................................................................7 5.3.WUS screwing recommendations........................................................................................8 5.4.Detailed views of WUS assembly.........................................................................................9 5.5.Method to verify the screwing torque..................................................................................11
...................................................................................................................... 12 6.1.Precautions.........................................................................................................................12 6.2.Mounting.............................................................................................................................12
.................................................................. 15
............................................................................................................... 18 8.1.Replacing valve seal...........................................................................................................18
.............................................................. 19 9.1.Presentation........................................................................................................................19 9.2.WUS holder goal.................................................................................................................20
................................................................................................................ 21 10.1.Step 1................................................................................................................................21 10.2.Step 2................................................................................................................................22 10.3.Step 3................................................................................................................................24 7.DISMOUNTING A TIRE EQUIPPED WITH A WUS 8.WUS DISMOUNTING 9.WUS MOUNTING SCREWDRIVER PROCEDURE 10.SCREWING STEPS 6.TIRE MOUNTING C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 3/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 PURPOSE 1. This document describes the requirements for the mounting of WUS. 2. TERMINOLOGY, ACRONYMS AND ABBREVATIONS 2.1. TERMINOLOGY e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D 2.2. ACRONYMS App NA NR TBD TBC HW Q SW RF TW WUS SY WL MD Approval Non Available Non Relevant To Be Defined To Be Confirmed Hardware Quality Software Radio Frequency Tire Watch (system for surveying tires pressure) Wheel Unit Sensor System Wireless Mechanical Design C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 4/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 3. DESCRIPTION The wheel unit sensor (WUS) of TIRE WATCH TM system is a pressure and temperature sensor composed with:
A molded black plastic housing, An anodized aluminium nut with BTR cavity for hexagonal key (5mm.), clipped in housing with a stainless steel spring, An anodized aluminum valve oriented at 90; including an EPDM seal, a short core mechanism and a cap. 4. UTILISATION RULES The Wheel Unit Sensor can be mounted on all motorcycle rims according to the following specification :
e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D
- with a minimal wide of 3 inches and with a diameter from 12 to 21 inches,
- with an ETRTO compliant valve hole about 11.5mm +/- 0,2 diameter, or 8,5mm+/-0,2,
- with a radial orientation of the valve hole axis
- with a maximum rim thickness around the valve hole about 6 mm.
- Rim Internal surface and External surface must be co planar on each side of the valve hole
- No Burrs accepted on external side of the valve hole for the seat of the seal, Valve, nut and spring seats must be plan with a sufficient diameter to accept spring, nut and valve. A seat diameter about 16.5mm +0.5 / -0 is sufficient to accept our TPMS system on spring side
(internal rim side) and on valve side (external rim side) For other mounting interface (ex : hole 8,3mm or valve in spoke (BMW)) ask to LDL the specification). Typical mounting External part of the rim C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 5/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 4.1. SPECIFICATIONS e b t o n n a c d n a t n e s n o c n e l y g o o n h c e T
-
L D L f t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Screwing torque for valve core mechanism:
Screwing torque for valve cap:
Manual screwing torque for nut:
Environmental Temperature Range:
Monitoring Temperature Range:
Surviving Temperature Range 1 minute :
Relative Pressure Range Monitored:
0.3 +/- 0.1 Nm. 0.2 to 0.35 Nm. 5 Nm +/- 0.5 Nm.
-20C to +60C.
-30C to +125C
-40C to +150C 0 to 3,5 bars. Relative Maximum pressure range non destructive:
0 to 15 bars Used Inflating Fluid:
Anti-puncture Fluid utilisation:
Air or Nitrogen Utilisation without any consequence. Just introduce Fluid when the valve is down, close to the ground Maximum speed of the vehicle:
350 Km/h on rim 17
********************************************************************************************************************
NOTA :
5. WUS MOUNTING 5.1. PRECAUTIONS DURING MOUNTING OPERATION Do NOT use WUS after a drop of more than 1 meter on a hard ground C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 6/ 24 Copyrights 2016 Toulouse France e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Do NOT generate an electrostatic discharge higher than 6 Kilovolts by air onto the WUS, during mounting and disassembly of the WUS or at any time during utilization (avoid the use of nylon worksuit, and in general way, avoid all textile rubbing before handling WUS) Do NOT store the TIRE WATCH at temperatures higher than 30C and lower than 0C When removing the core from the valve, it has to be replaced by a new short core (brass without chrome forbidden) of the same type, according to V0.07.1 ETRTO core chamber specification. The valve cap must always be in place (except for inflating, pressure release or pressure checks). 5.2. WUS MOUNTING Check the external surface of the rim cleanness ; remove grits and other paint marks Orientation of the Wheel Unit Sensor on the rim : the black housing engraved must be visible after mounting. The sensor body must be presented in front of the valve hole, inside the rim, then lay the spring upon the flat surface around the valve hole. Shove the valve into the valve hole, the seal must face the rim. Push onto the WUS nut in order to bend the spring, and then start screwing the valve manually still the seal get in touch with the rim. While screwing keep the WUS in place. Make sure that the screwing tool stays aligned with the hexagonal cavity of the nut during the screwing process. C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 7/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 e b 5.3. WUS SCREWING RECOMMENDATIONS t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Make sure the following recommendations are respected :
Screwing speed : max of 2 turns in 1 second. Apply a torque of 5 Nm +/- 0,5 Nm with the good screwing speed. This is the screwing condition of on which the specification of our WUS is based. For the manual process please use a torque controlled tool. The valve and the nut have to be screwed on 5 complete threads (5 nut rounds) Minimum, The plastic part must slightly be able to turn around its nut after tightening; under no circumstances it has to be in contact on the rim surface. You must be able to introduce a piece of paper between the sensor and the rim (minimum slack of 1/10 mm). Once mounted, the WUS must be distant from the rim as illustrated here under ; the distance between them can reach 10mm. Optimal distance is 1mm. From 1/10 to 10 mm C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 8/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Electronic part including the spring. This part is situated inside of the tyre Valve including the seal ;
situated on the external part of the tire RIM e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D 5.4. DETAILED VIEWS OF WUS ASSEMBLY Step N 1 Step N2 The Spring side must face the internal side of the rim. The valve seal must face the rim valve hole on the external side. C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 9/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 While pushing on the nut, keep it centred on the valve hole ; then introduce the valve in the valve hole. Step N3 e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Step N4 While you are still pushing on the nut start screwing the valve manually still the seal get in touch with the rim. Step N5
- Screw the nut with a allen key
(5mm). Do note exceed 2 rounds per second.
- Final torque 5 Nm +/- 0.5 Nm. AVOID ANY SCREWING IF PLASTIC HOUSING IS IN CONTACT WITH THE RIM
(the introduction of a piece of paper (80gr/m) between the rim and the plastic parts make you sure that there is no contact). C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 10/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 e b Step N6
- Check that the external part of the valve does not meet any obstacle during rim rotation (like break system).
- Check that the external seal is correctly set and that the valve is in contact with the rim.
- The flat surface of the valve must feet the flat surface of rim valve hole.
- The plastic parts must be free from rim constraints (no contact).
- The plastic parts must slightly be able to turn around its nut,on approximatively +/- 5. (no constraints on plastic parts operated by the rim sides after tightening). t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Step N7 5.5. METHOD TO VERIFY THE SCREWING TORQUE C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 11/ 24 Copyrights 2016 Toulouse France e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 The measurement of the residual torque is done by retightening the valve nut by a turn maximum in reduced speed (1/4 of a turn in 10 seconds). Therefore use a torque-controlled tool which is able to memorize the maximum torque. IF the torque mandatory to start the rotation of the nut in the measurement is equal to 4 Nm, stop the procedure, the Torque is correct. The retightening torque may not be smaller than 4 Nm. It is recommended to verify the screwing torque at each tire mounting. 6. TIRE MOUNTING 6.1. PRECAUTIONS Before any mounting operation of the tire, make sure that the Wheel Unit Sensor has been correctly mounted and tightened to the rim. The tire must be lubricated so as to facilitate its mounting. Respect manufacturer recommendations. NO lubrication product, tire ease or any other matter may partially or completely cover the pressure measuring hole or the inflation hole of the wheel unit. In general, it is forbidden to coat the wheel unit with a soap for tire mounting The tire must never be allowed to put mechanical constraints onto the wheel unit sensor during the mounting operation; only a dynamic slide touch is acceptable, constant pressure stress is forbidden. Make sure that the tire does not get trapped between the rim and the wheel unit sensor during mounting procedure. Its recommended to check the screwing torque before any tire mounting. 6.2. MOUNTING The bead of the tire must be engaged approximately 80 beyond the valve. Do not introduce a mounting tool between the valve and the point of engagement of the tire. Tire mounting must be done while moving away from the valve
. Beyond this point starts the final engagement operation, which finishes in the zone of the valve. During this phase, only fast sliding touch is allowed during final tire jumping onto the rim. Process to be validated by LDL Technology. C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 12/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 For manual mounting only standard dealer shop machine e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D First sidewall :
Step N1 Step N2 C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 13/ 24 Copyrights 2016 For clockwise tire mounting machine Start putting the tire on the rim on the opposite side of the valve The first sidewall is now introduced Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Second sidewall :
Step N3 30 to 80 Start introducing manually the second sidewall At almost 50 far away the valve e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Step N4 At the end of the mounting process, the second sidewall end climbing on the rim when the shoe is in front of the valve C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 14/ 24 Copyrights 2016 Toulouse France e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 7. DISMOUNTING A TIRE EQUIPPED WITH A WUS Before detaching the tire, make sure that the Wheel Unit Sensor is still correctly mounted and tightened on the rim, by checking that the valve is tightened. Before any introduction of tools between the tire and the rim, make sure that both sidewalls of the tire are completely detached from the rim. For clockwise tire mounting machine Step N1 Step N2 Grip the tire with the press at 50 minimum from the valve With a tire iron, raise the first sidewall at 50 from the valve according to scheme next page C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 15/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Scheme: Universal tire mounting and dismounting procedure e b Outil de montage (immobile). Mounting tool (static). Valve dans la position de dpart. Valve START position. Environ 50. About 50. t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Pneu. Tire. Jante. Rim. Sens de rotation de la roue sur lappareil Wheel spin direction on the Mounting machine. C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 16/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Step N3 e b Step N4 t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Slide the tool head under the tire Then make the tire turn to disengage the first sidewall Disassembly of the second sidewall. Step N5 Overview Rear View With a tire iron, raise the second sidewall at 50 from the valve Repeat the disassembly operations of the first sidewall until the tire is completely separated from the rim. At any time the hand Tool or machine Tool must get in touch with the sensor. C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 17/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 8. WUS DISMOUNTING It is MANDATORY to interchange the seal if a complete disassembly of the WUS is done (if you change the rim for example), all unscrewing action on the nut is equivalent to a complete disassembly. Its RECOMMANDED to check the screwing torque at each time the tire is dismounted 8.1. REPLACING VALVE SEAL For the used valve seal dismounting, use a PLASTIC TOOL to disengage the seal from its case (in order to avoid damaging the valve). e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Disengage the seal from its case Slide the seal along the valve body Remove the used seal THREADING IT IS MANDATORY TO CHANGE THE VALVE IF THERE IS ANY SCRATCH OR HIT IN THIS AREA NEW VALVE SEAL MOUNTING Do not use lubricant, solvent, grease or oil. Check that the valve can be used again. Present the seal in this way, flat surface oriented to the valve cap Shove the seal into the valve Check that the seal is in its lower position C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 18/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 9. WUS MOUNTING SCREWDRIVER PROCEDURE 9.1. PRESENTATION Hexagonal 5mm wrench Screwdriver clutch e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Screwdriver (here LUM12 HRX8-50 from Atlas Copco reference: 8431028025) WUS HOLDER WUS HOLDER FIXED ONTO SCREWDRIVER C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 19/ 24 Copyrights 2016 Toulouse France e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 9.2. WUS HOLDER GOAL For an automatic screwing, LDL recommend to use a WUS holder fixed onto the screwdriver which pushes the case down and lock the case in rotation. WUS case displacement Anti rotation shapes C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 20/ 24 Copyrights 2016 Push Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 10. SCREWING STEPS e b 10.1. STEP 1 Introduce the valve t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Autorized area to hold the valve by hand Start the screwing by hand till get contact between seal and rim external side. C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 21/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 10.2. STEP 2 Apply automatic screwdriver on the top housing till rise the introduction of the hexagonal 5mm wrench into the nut and lock in rotation the case with the WUS Holder (PTFE part mounted onto the screw driver). Just maintain the valve with hand by its nose. e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D Push C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 22/ 24 Copyrights 2016 Toulouse France WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 e b Push t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 23/ 24 Copyrights 2016 Toulouse France e b t o n n a c d n a l y g o o n h c e T
-
L D L f t n e s n o c n e t t i r w t u o h t i w d e t t i o y t r e p o r p m s n a r t r o d e c u d o r p e r e h t s i t n e m u c o D WUS MOTO Mounting process mode Ref : C 307 020 0010 Version : E2 Details on WUS case displacement:
For a better understanding WUS holder is represented with a partial cut (orange area) Now the screwdriver clutch is on the nut and the WUS holder has pushed down the WUS case. There is a gap between the nut head and the WUS case (green arrow on scheme) so we can start screwing without the nut touching the WUS case and damaging the WUS anti rotation embossed shapes. During screwing the nut must be pressed onto the rim, so it is the nut which achieves the coaxiality of the assembly in the valve hole and not the valve seal. 10.3. STEP 3 In case of L-Valve rotation under screwing action, hold the valve during the screwing process with a PTFE spanner to avoid marking and scratch onto the valve anodization. LDL recommend to screw according the profile explained below :
Screw the valve by hand till get contact between valve seal and external rim side (around 5 complete turns). Screwing by hand on at least 1 turn is also accepted for industrial production. Screw the nut with a torque gun at constant speed :
No minimum, 50 rpm recommended , 100 rpm maximum , do not exceed 120rpm MAX LUM12 HRX8-50 LUM12 HRX8-110 Screwing tool Atlas Copco reference 0 50 100 110 120 Torque gun speed , in RPM FINAL TORQUE: 5 Nm 0.5 Nm C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS 24/ 24 Copyrights 2016 Toulouse France