45mm How to use the Letv sele stick Press for 3 second to power on 4 5 Press the sele button to take photos/record videos Bluetooth connection How to connect via Bluetooth Step 1. Press the button for 3 seconds and the LED indicator will glow blue, indicating that the sele stick is powered on. When the indicator ashes blue, the device is in the Bluetooth pairing mode (if it has never been connected) Reconnecting mode (auto connecting to a paired device in 5 seconds) Step 2. Turn on Bluetooth on the phone, search for letv-ZPG, and tap it to auto pair and connect. When connected, the indicator on the sele stick will glow blue, and the photo-taking mode is ready to use Step 3. Place the phone into the bracket, launch Camera on the phone, and press the sele button to take photos/record videos Press for 3 second to power o
(The indicator glows red during charging and goes o when fully charged) 6 LeUBP-201E
(The indicator glows blue when powered on and ashes blue when pairing)
*
We suggest you to remove the phone case when using this device. Do not twist the sele stick using extra force. 85mm Product Weight: 173g Extended length: 66cm Materials: aluminum, plastic Packing dimensions: 213x61x41mm In the Box: sele stick x1 lanyard x1 user manual x1 3R warranty certicate x1 data cable x1 Battery Capacity:
Working time: 30H Input current:
Charge cycles:
65mAh 300MA-2A 300 Standby time: 3 days Charging voltage: 5V Charging time: 1.5H Notes 1. Store and use the product in normal temperature. 2. Do not expose this product to rain and water or use in a wet environment. 3. Do not throw the product to avoid damage. 4. Do not use chemical solvents to coat or wipe the product. 5. The maximum weight capacity of the phone bracket and connecting rod is 1kg. 6. Do not use the sele stick where you are not prohibited. 7. Check it in as luggage when taking a ight. Kind notice: If the Letv sele stick is not connected to a phone 10 minutes after it is powered on, the indicator will go o and the sele stick will go into the hibernation mode. In the photo-taking mode, the indicator will go o and the sele stick will go into the hibernation mode if idle for 24 hours. If the connected phone goes out of range
(10m in testing environment), the sele stick will go into the hibernation mode. You can wake it up by pressing the sele button. The statements should be displayed in the user manual:
changes or modifications not expressly approved by the party responsible for compliance could void the users aut-
hority to operate the equipment. This device complies with Part 15 of the FCC Rules. Oper-
ation is subject to the following two conditions: (1) this dev-
ice may not cause harmful interference, and (2) this device must accept any interference received, including interferen-
ce that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re-
asonable protection against harmful interference in a resid-
ential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use-
d in accordance with the instructions, may cause harmful i-
nterference to radio communications. However, there is no guarantee that interference will not occur in a particular ins-
tallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following m-
easures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.