INSTALLATION INSTRUCTIONS For DOCK-150-B-BK Wireless Charger Input rating: DC 5V, 6A Output rating: Wireless charger: 5 watts Max. USB charger: 1 x 2.4A (12 watts) Max. 2 x 1A (5 watts) Max. or using this unit. CAUTION: To prevent the risk of re and electric shock, please be sure to read all instructions before installing IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of re, electric shock, or injury to persons:
1. Do not use power supply and cord(s) from 3rd party to connect the unit(s). 2. Do not try to open the unit for any reason. 3. Do not place any metal objects on the wireless charging surface. 4. Do not charge devices simultaneously when the total (including wireless and USB charger) charging power is over 5V 6A (30W). MOUNTING 1. Bore a 3 hole using the specications from the illustrations on the right. 2. Push the charger into the hole. 3. Connect the power adapter cord to the input jack on the bottom of the wireless charger. USING WIRELESS CHARGER 1. Plug the power adapter to nearest wall outlet. 2. The LED indicator will ash briey indicating the charger is correctly powered up. 3. Place the Qi wireless charging capable device on the DOCK-150-B-BK. Blue indicator will be on for 10 seconds when it detects the device being charged. Once the device is fully charged the LED turns green indicating the charging is completed (green indicator works with compatible devices with status feedback functions only). USING USB CHARGER 1. Press the center of the DOCK-150-B-BK to reveal the USB charging ports. 2. Select a charging port based on required max. charging current of the device being charged. 3. Plug in the USB type A connector to the port on the DOCK-150-B-BK to charge the device. 4. Remove all the USB type A connectors from the DOCK-150-B-BK and press the center again to hide the USB charging ports. Please contact with National Lighting Corp. for assistance if any question occurs during installation. DOCK-150-B-BK Installation Instructions National Lighting Corp. Version: 1.2 INSTALLATION INSTRUCTIONS For DOCK-950-B-QC-BK Wireless Charger Input rating: DC 5V, 2A (Quick Charge power adapter) Output rating: 5 watts / 10 watts (Quick Charge power adapter) CAUTION: To prevent the risk of re and electric shock, please be sure to read all instructions before installing or using this unit. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of re, electric shock, or injury to persons:
1. Do not use power supply and cord(s) from 3rd party to connect the unit(s). 2. Do not try to open the unit for any reason. 3. Do not place any metal objects on the wireless charging surface. MOUNTING 1. Bore a 3 hole using the specications from the illustrations on the right. 2. Push the charger into the hole. 3. Connect the power adapter cord to the input jack on the bottom of the wireless charger. USING THIS WIRELESS CHARGER 1. Plug the power adapter to nearest wall outlet. 2. The LED indicator will ash briey indicating the charger is correctly powered up. 3. Place the Qi wireless charging capable device on the DOCK-950-B-QC-BK. Blue indicator will be on for 10 seconds when it detects the device being charged.Once the device is fully charged the LED turns green indicating the charging is completed (green indicator works with compatible devices with status feedback functions only). This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Please contact with National Lighting Corp for assistance if any question occurs during installation. DOCK-950-B-QC-BK Installation Instructions National Lighting Corp. Version: 1.2