FCC ID: 2APYY-AB0447 WIRELESS CHARGER

90 mm 90 mm 90 mm Glass Wireless charger Bamboo Operation:

FCC statement User manual Product Overview:

1 2 3 4 Indicator Light Type-C Charging area Instruction sheet Important Safety Instructions Specifications:

Input: DC 5V/2A, 9V/2A Wireless Output: DC 5V/1A, 9V/1.1A Working Distance: 2~4 mm When using this product, basic precautions should always be followed, including the following:

a. Read all the instructions before using the product. b.To reduce the risk of injury, close supervision is necessary when the product is used near children. c. Do not put finger or hands into the product. d. Do not expose product to rain or snow. e. Using the product incorrectly may result in the risk of fire or injury to persons. f. Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons. g. Do not use the product that is damaged or modified. Damaged or modified product may exhibit unpredictable behavior resulting in fire, explosion and/or risk of injury. h. Do not disassemble the product.Takeit to a qualified service person when services or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. i. Do not expose product to fire or excessively high temperatures. Exposure to fire or temperature above 113F (45C) may cause explosion. j. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. k. Switch off the product when not in use. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 4 However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The distance between user and products should be no less 20cm Warning!

This wireless charger is designed to charge Qi compatible mobile phones. Not for use with Airpods, Airpod Pros or other earphones with wireless charging cases.Airpods is a trademark of Apple Inc., registered in the U.S. and other countries. 1 3 0 m m

Item No.: 28829 562792 Input: 5V 2A, 9V 2A Wireless Output: 5V 1A, 9V 1.1A FCC ID:2APYY-AB0447 MADE IN CHINA m m 4 9 94 mm Item No.: 28829 562792 Input: 5V 2A, 9V 2A Wireless Output: 5V 1A, 9V 1.1A FCC ID:2APYY-AB0447 MADE IN CHINA 5 mm 25mm Item No.: 28829 562792 Input: 5V 2A, 9V 2A Wireless Output: 5V 1A, 9V 1.1A FCC ID:2APYY-AB0447 MADE IN CHINA 5 mm 15 mm 45mm

August 09, 2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with L E A D E R P R E M I U M S L I M I T E D / 9/F., Hengfu Mansion, NO.858. Fuming Road, Ningbo, China

<Signature>

NameJoan Wang TitleManager CompanyLEADER PREMIUMS LIMITED

August 09, 2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2APYY-AB0447 Product Name: WIRELESS CHARGER Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameJoan Wang TitleManager CompanyLEADER PREMIUMS LIMITED

LEADER PREMIUMS LIMITED 9/F,Heng FU Mansion,No.858,Fuming Road,Ningbo China Tel.: 0086-574-87723018 Fax: 0086-574-87379877 Covered Equipment Certification Attestation Letter 03/07/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2APYY-AB0447 LEADER PREMIUMS LIMITED certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. LEADER PREMIUMS LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: JOAN Wang Title:Sales Manager Company Name: LEADER PREMIUMS LIMITED Date: 03/07/2023

LEADER PREMIUMS LIMITED 9/F,Heng FU Mansion,No.858,Fuming Road,Ningbo China Tel.: 0086-574-87723018 Fax: 0086-574-87379877 U.S. Agent Designation for Service of Process -

Certification Attestation Letter 03/07/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2APYY-AB0447 FRN:0027569581 Per section 2.911(d)(7) of the FCC rules, LEADER PREMIUMS LIMITED certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: TWINTECH INDUSTRY,INC. FCC Registration Number (FRN): 0033423088 Physical U.S. Company Address: 16401 Berwyn Road Cerritos,CA 90703 Contact Person: Hsin-Chia Chao Agent Email Address: hc@twintechpromo.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Agent Signed (if different to Applicant):

Signed:

Signed:

Printed name: JOAN Wang Title: Sales Manager Company Name: LEADER PREMIUMS LIMITED Date: 03/07/2023 Printed name:Hsin-Chia Chao Title: President Company Name: hc@twintechpromo.com Date: 06/07/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.