FCC ID: 2APYY-AB0119 wireless chargers

Wireless Charger User Manual This Wireless Charger will allow you to charge any wireless compatible smartphone or device without the need for a charge cable by simply placing it on top of the charge plate.Compatible with the wireless charging protocols as stipulated by the Wireless Power Consortium (WPC). Contents:

1. Wireless Charger 2. Micro USB Charging cable 3. User Manual Specifications:

Size: Size: 75 x 76 x 12 mm Number of coils:One Power Rating: 5W Input:5V / 1.5A Output:5V / 1A Conversion Efficiency:70%

Directions of Use:

1. Using the supplied USB charge cable, plug the Micro USB connector into the rear of the wireless charger and then the standard USB connector into an approved AC power adapter. 2. When the power is turned on, the LED indicator will turn on in white color for 3s then turn off to show that the wireless charger is ready for use. 3. Place your wireless compatible device rear down onto the charger. When detected and positioned correctly the indicator will switch the white LED on and begin to charge your device. 4. When charging is complete remove your device and the LED indicator will turn off. Notes:

Correct Operation: Use only for the purpose the product was designed. Misuse may cause fire, explosion or other dangers. Appropriate Devices: Use only Approved AC power adapters with this device as inappropriate current may cause lower than expected charge rates. USB Cable: The cable supplied with this wireless charger provides appropriate current and connectivity.When using a higher input current, please use an appropriate cable rated higher than 2.0 Amps. Cleanliness&Use: Ensure that the charging platform is clean at all times.Sensitive equipment and other nonmetals or electromagnetic items should not be placed on the charging base. Overheating: If this should occur,please turn off the power to the charger and allow it to cool before attempting to charge again. Misuse&Tampering: Keep device dry.Do not store or operate in extreme environments. Do not attempt to open, throw,hit or shake this device. Sensitive Electronic Devices:

Manufacturers recommend keeping a minimum distance of 20cm between a wireless charging device and other sensitive devices.If there is any reason to suspect that interference occurs, please turn off the power immediately. FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheusersauthoritytooperatetheequipment. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovide reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This equipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalled andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurina particularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing measures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The distance between user and products should be no less than 20cm

WIRELESS CHARGERS Input:DC 5V/1500mA WIRELESS CHARGERS Input:DC 5V/1500mA FCC ID: 2APYY-AB0119 FCC ID: 2APYY-AB0119

June 15, 2020 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China. (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with LEADER PREMIUMS LIMITED/9/F.,Hengfu Mansion,NO.858 Fuming Road

<Signature>

NameJoan Wang TitleManager Applicant CompanyLEADER PREMIUMS LIMITED

June 15, 2020 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2APYY-AB0119 Product Name: wireless chargers Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameJoan Wang TitleManager CompanyLEADER PREMIUMS LIMITED