Tracker 3.0 Instructions 1.1 Appearance diagram Power Vol Key Description:
1. On /Off key: in the off state, press this key to start the machine normally; in the on state, short press to enter or exit the sleep mode, long press this key will give a prompt whether to shut down or not, if long press the power key for more than 10 seconds, the machine will shut down automatically. 2. Volume adjustment key: press left to decrease the volume and right to increase the volume. 1.2 Interface diagram Interface specification
(1) COM:Can be connected toCOM peripherals.
(2) HDMI OUT:HD signal transmission to peripherals.
(3) USB *4 :Can be connected to USB peripherals, such as USB mouse, USB scanner and other peripherals with USB.
(4) Micro SD:Can bepluged in the micro SD card and play the content stored in it.
(5) LAN:Can connect to the Internet.
(6) DC:Input power supply. 1.3 Connection of Electronic balance and Tracker
(as shown in the figure below) 1.4 Product Specification Product Specification Table Product name LCM Track 3.0 13.3inch19201080 IPS Architecture Dual Core Cortex-A72+Quad Core Cortex-A53 COM Cable: as follows Can be connected the Tracker and the Electronic balance by the COM cable, and then the Electronic balance will transfer the weight data to Tracker. At this time, the Tracker will calculate through the corresponding app application software, and display in the corresponding form in the Tracker. Through the application and calculation of the Tracker app, the wasted food can be classified, summarized and displayed. System DDR Main frequency EMMC Wifi/BT TouchScreen USB2.0 Input Temperature Size Others Android 9.0 2GB Up to 2GHz 8GB WiFi,2.4G+5G 10Point G+G Support external mouse, USB flash disk, etc 12V/3A Operation Temperature: 0~50C; Storage Temperature: -10~50C 217.5mm327mm26mm Support multiple audio and video formats 1.5 Standard list Please check whether the main engine and accessories are complete after purchasing the product. Number 1 2 3 4 5 Name Tracker Instructions Power Input Product certificate Warranty card Quantity 1 1 1 1 1 Unit Set PCS PCS Sheet Sheet Remarks Note: if consumers use power adapter for power supply, they should purchase a power adapter that meets the requirements of corresponding safety standards or a power adapter that has obtained CE / FCC certification The accessories are subject to the real object, and are subject to change without notice. FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Matters needing attention In order to use and store the machine safely and correctly, please read the precautions carefully first. 1. Users are not allowed to disassemble by themselves. 2. Do not use or store the machine in the environment of high temperature, high pressure, humidity, strong static electricity and strong magnetic field. 3. Avoid the machine falling from a high place or being under too much pressure. Do not use pen, ball point pen, pencil and other sharp objects to contact the LCD screen, so as to avoid damage to the screen. 4. When the screen display is blurry and the sound playing is abnormal, using the machine can not guarantee the normal use of all functions. 5. The machine has some water-proof functions. In case of rain or falling into the water accidentally, please do not start the machine. After drying the machine, attach the description of the occurrence, and send it to the after-sales service point in the area for maintenance as soon as possible. 6. Please do not use the machine in dusty place or throw or shake it to avoid damaging the parts of the machine. 7. Do not use any highly corrosive liquid to clean the components of the machine; use soft cleaning cloth and neutral detergent when cleaning. 8. Please back up all important data separately. Our company will not be responsible for the loss or damage of internal data caused by improper operation, unauthorized maintenance, and inability to use. 9. When upgrading the system, please make sure that the machine is powered on to avoid the upgrade failure or even system crash due to low power failure during the upgrade process. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body. CE:
1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.Adapter shall be installed near the equipment and shall be easily accessible. 3.The plug considered as disconnect device of adapter. 4.The device complies with RF specifications when the device used at 0m form your body. 5.The product shall be connected to a USB interface of version USB2.0 or higher. Hereby, Leanpath,Inc. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. Frepuency bands Maximum output power BT(EIRP)2402-2480 MHz BLE(EIRP)2402-2480 MHz 2.4G WiFi (EIRP) 2412MHz-2472MHz 5G WiFi(EIRP) :5150-5250MHz ,5725MHz-5875MHz 7.20dBm 3.04 dBm 17.06dBm 18.36dBm Address:8305 SW Creekside Place, Suite A, Beaverton OR 97008