all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.99 MiB | November 09 2023 | |||
1 |
|
internal photo | Internal Photos | 448.10 KiB | November 09 2023 | |||
1 |
|
external photo | External Photos | 213.70 KiB | November 09 2023 | |||
1 |
|
label and location | ID Label/Location Info | 371.86 KiB | November 09 2023 | |||
1 |
|
Agent for service Attestation from Agent | Attestation Statements | 246.54 KiB | November 09 2023 | |||
1 |
|
Agent for service Attestation from Applicant | Attestation Statements | 104.38 KiB | November 09 2023 | |||
1 |
|
Antenna Spec | Test Report | 699.58 KiB | November 09 2023 | |||
1 | Block Diagram | Block Diagram | November 09 2023 | confidential | ||||
1 |
|
FCC 2.911[d][5] Attestation | Attestation Statements | 111.65 KiB | November 09 2023 | |||
1 |
|
RF Exposure | RF Exposure Info | 196.36 KiB | November 09 2023 | |||
1 |
|
Test Report | Test Report | 682.69 KiB | November 09 2023 | |||
1 |
|
Test Setup Photo | Test Setup Photos | 634.21 KiB | November 09 2023 | |||
1 |
|
author letter | Cover Letter(s) | 1.17 MiB | November 09 2023 | |||
1 |
|
confidentiality request letter | Cover Letter(s) | 84.65 KiB | November 09 2023 | |||
1 | operation description | Operational Description | November 09 2023 | confidential | ||||
1 | schematics | Schematics | November 09 2023 | confidential |
1 | User Manual | Users Manual | 4.99 MiB | November 09 2023 |
Item #1000 000 000 USER GUIDE SMART HOME ALARM SYSTEM THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of our Smart Home Alarm System Kit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Defiant!
Table of Contents Safety Information........................ 3 Warranty........................................ 4 Pre-Installation............................. 5 Inspect All Components............. 5 About Wireless Equipment ........ 5 Installation Location .................. 5 Package Contents ..................... 6 Product Introduction .................... 7 Siren Hub................................... 7 Keypad......................................10 Motion Sensor..........................12 Door/Window Sensor................13 Installation ..................................15 Operation ....................................20 Replace the Batteries .................23 Specification...............................24 Troubleshooting..........................25 2 Safety Information WARNING: Keep out of reach of children. This product contains small magnets and other small parts, which can cause choking or injury if ingested. WARNING: Any battery has the potential to leak harmful chemicals that can damage skin, clothing or the inside of the battery compartment. To avoid risk of injury, do not allow any substance leaked from the battery to come in contact with eyes or skin. Any battery has the potential to rupture and may even explode if exposed to re or other forms of excessive heat. Use caution at all times when handling batteries. To reduce the risk of personal injury or harm to this product, take the following precautions:
Do not use different brands of batteries in the same device. When replacing batteries always replace the whole set. Do not use rechargeable or reusable batteries. Do not allow children to install batteries unsupervised. Follow battery manufacturers instructions for the proper handling, storage and disposal of batteries. WARNING: Used batteries should be disposed of at an appropriate recycling center. Do not discard with normal household trash. DO NOT BURN. WARNING: Before mounting any of the devices clean the surface with a gentle degreaser. Please note that some surfaces may be unsuitable for mounting with the adhesive pads provided. WARNING: Risk of personal injury. Prolonged exposure to alarm siren may cause permanent hearing loss. WARNING: Keep batteries away from children. This product contains coin/button cell batteries. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep away from infants and small children at all times. If battery is swallowed or placed inside any part of the body, immediately seek EMERGENCY medical attention. Battery may rupture if the inczorrect type of battery is used. Follow the instructions in this manual. CAUTION: Do not install In wet locations. Outside the premises (outdoors). Near metal objects or mirrors which may cause radio signal interference. Near main wiring. 3 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Warranty 1 YEAR LIMITED WARRANTY This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. Guarantee does not include normal wear and tear. Wireless Protocal The Wi-Fi CERTIFIED Logo is a registered trademark of Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google, Google Play and Google Home are trademarks of Google LLC. The keypad and the sensors only works with Siren Hub required. FCC Regulation This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pre-Installation INSPECT ALL COMPONENTS Compare all parts in the package with the Package Contents list. If any part appears missing or damaged, do not install this product. Contact customer support. ABOUT WIRELESS EQUIPMENT Wireless systems are reliable and tested to high standards; however, it is important to consider that there are some limitations due to their transmitting power and range:
Receivers may be blocked by radio signals occurring on or near operating frequencies, regardless of the code selected. A receiver can only respond to one transmitted signal at a time. Wireless equipment should be tested regularly to determine whether there are sources of interference and to protect against faults. INSTALLATION LOCATION DETERMINE THE LOCATION OF THE SIREN HUB, WHICH SHOULD BE PLACED:
Within a few feet of an electrical outlet Where it is easily accessible Away from doors or windows that could be accessed by intruders Away from extreme temperature sources (radiators, ovens, stoves etc.) and large metal objects that could interfere with the wireless performance. 5 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Pre-Installation PACKAGE CONTENTS AA BB CC DD EE Part Description AA BB CC DD Siren Hub with 3*AA batteries Keypad with 3*AA batteries Motion Sensor with 2*AAA batteries Door/Window Sensors with CR2032 battery EE Magnet FF GG HH Power Adapter and Cable Keypad Double-Side Adhesive Tape Mounting Screws Sets Quantity 1 1 1 2 2 1 1 10 FF GG HH WARNING: THESE SENSORS AND THE KEYPAD HAVE TAMPER RESISTANT BRACKETS TO ENSURE THEY ARE NOT REMOVED FROM THEIR INSTALLATION PLACEMENT. THESE BRACKETS MUST REMAIN ON THE SENSORS DURING USE. REMOVAL OF THESE BRACKETS WILL RESULT IN A TAMPER ALARM BEING TRIGGERED. 6 Pre-Installation (continued) Product Introduction Siren Hub Your home Siren Hub connects the alarm system to your 2.4GHz Wireless network and other smart home devices. It also sounds the alarm to alert you when a security breach has occurred. A B C D E F G Part Description Siren Alarm LED Power LED Internet LED Join/Pairing LED A B C D E Part Description Reset Button F G H I Battery Bracket Power Adapter and Cable H I 7 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Pre-Installation (continued) Power LED Internet LED Alarm LED Join/Pairing LED Description OFF OFF BLINKING OFF OFF OFF ON Blinking ON OFF ON ON ON ON OFF OFF OFF OFF ON=
GREEN |
YELLOW |
RED ON=
GREEN |
YELLOW |
RED OFF OFF OFF Armed Away ON= RED Armed Stay ON=GREEN Blinking OFF OFF OFF The base station is powered off. Booting up. Applicable whether the Unit is onboarded or not. Connecting to WiFi. See the timeout below. Unit is Onboarded. Failed to connect to WiFi. The unit did not connect to the Internet after 30 seconds. Unit is Onboarded. Disarmed, powered on and operates normally. No Faults detected, no ofine sensors. Armed in Stay or Away Modes, Powered on operates normally. No Faults detected, no ofine sensors. The Unit Reset. Press the siren button for 10 seconds to trigger a reset. The LED will blink for 5 secs. The Unit will remove all paired sensors and keypad and will clear any paired sensors, sensor states, and stored PINs. 8 Pre-Installation (continued) Power LED Internet LED Alarm LED ON ON OFF OFF ON ON ON ON ON=
YELLOW OFF ON Blinking Fast Blinking ON ON OFF ON=RED blinking ON ON OFF OFF OFF Join/Pairing LED FAST BLINKING for 1 sec duration. ON solid for 1 sec duration. Description Pairing of a sensor failed. Pairing of a sensor succeeded. Blue Alarm State. May happen when 1) one or more sensors lose connectivity to the hub, which is indicated as an ofine state in the app. 2) the user tries to arm the alarm system and some of the sensors may need to be bypassed. The blue light goes off after the condition is rectied. Turn on the alarm indicator LEDs if the alarm is active. Unit is in battery backup mode. Unit is in low battery mode. WiFi is disconnected. 9 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Pre-Installation (continued) Keypad The keypad controls your alarm system via Bluetooth through connecting to gateway. It features four alarm modes: Disarm - deactivates sensors, Arm Away - activates all sensors, Arm Stay - activates select sensors and SOS to active emergency alarm to suit your needs. A B C E F I D G H J N M L K Part Description A B C D E F G Disarm Arm Away Arm Stay SOS Network Indicator Not Ready Sensor Alert Indicator Battery Indicator Items Onboard Button Part Description Buzzer Cancel H I Conrm Anti-tamper Switch Reset/Onboard Button J K L M Battery Bracket N Description Press and hold the reset/onboard button (behind the battery cover) for 5 seconds to start onboarding/pairing of the device. This is a medium duration press. 10 Pre-Installation (continued) Items Battery Indicator Not Ready Sensor Alert Indicator Network Indicator Reset Button Anti-tamper Switch Buzzer Conrm/Cancel Disarmed Armed Stay Armed Away SOS Description Solid green: Battery capacity >= 20%
Solid yellow: Low 20% >=battery capacity > 10%
Solid red: Very Low Battery capacity <= 10%
Batteries should be replaced If some sensors are not ready (tampered with is active, malfunctioned sensor, bypass required) when try to arm the system, the app will send the notication and the LED indicator on the keypad will ash to indicate that the system is not ready for arming. Presses to continue arming or press X to cancel arming. Note that the sensor can be bypassed/ignored in the app before arming. Flashing green: Pairing and searching for the hub Solid red: No signal or bad signal from the hub Solid green: Paired to the hub, good signal Press and hold it for 10 seconds to reset the device. After reset, the device will clear the network information, restore factory Settings,and enter the pairing state. Once the keypad is taken off the bracket, the anti-tamper alarm will be triggered For sound prompt Conrm: Conrms the mode you are entering Cancels: Cancels whatever mode you may have been entering and resets the keypad back to a ready state Disarmed: Disarms the alarm system. No alarms will sound in this mode Armed Stay: Used to only arm certain selected sensors when the user is at home but still wants partial protection. Ex. If you want to secure the front door, but do not want the hallway motion sensor activated Armed Away: Used to arm all sensors on the network Holding the SOS button for 3 seconds triggers an alarm from the Siren Hub. 11 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Pre-Installation (continued) Motion Sensor The Motion Sensor sends you mobile alerts whenever motion is detected. It seamlessly pairs with your Siren Hub and can be easily mounted to any wall or corner in your home. A D B C Part Description LED Indicator Reset/Onboard Button Anti-tamper Switch Battery Bracket A B C D E E Items LED Indicator Reset Button Onboard Button Anti-tamper Switch Description If sensor has not been added to Siren Hub, the LED will blink about once per second. The LED will be turned off after connecting to the Siren Hub Press and hold the reset button (behind the battery cover) for 10 seconds to reset the device. The reset button is the same button used for onboarding. After reset, the device will clear the network information, restore factory Settings, and enter the pairing state. Press and hold the reset/onboard button (behind the battery cover) for 5 seconds to start onboarding/pairing of the device. This is a medium duration press. If the sensor is removed from the bracket, it will trigger the anti-tamper switch and send a notication to the app. When installing, please be sure that the sensor is well mounted to avoid false notications. 12 Pre-Installation (continued) Door/Wndow Sensor Sends a notication or sounds the alarm whenever a door or window is opened. A G C B F D E Part Description A B C LED Indicator Magnet Anti-tamper Switch Part Description Battery Battery Cover Bracket Bypass/Reset Button D E F G Items LED Indicator Reset Button Onboard Button Description If sensor has not been added to Siren Hub, the LED will blink about once per second. The LED will be turned off after connecting to the Siren hub. Press the front of the device for 10 seconds to reset the device. Note that the bracket must be removed rst. This is a long press. After reset, the device will clear the network information, restore factory Settings, and enter the pairing state. Immediately after reset, the sensor will provide updated information including battery level to the hub. Press the front of the device for 5 seconds to start onboarding/
pairing of the device. Note that the Bracket(F) must be removed rst.This is a medium duration press. 13 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Pre-Installation (continued) Items Bypass Button Anti-tamper Switch Description Pressing the front of the device for < 1 second will temporarily disarm the sensor (the default time is 1 minute(s). Then opening the door/window will not trigger the alarm. The system will resume its state after the door/window has been closed. A. By default, the bypass feature is disabled. If the door/
window is opened under ARM AWAY or ARM STAY state, the alarm will be triggered. B. When the system is under ARM AWAY or ARM STAY mode, after you set the BYPASS time, press the BYPASS button on t he device, the alarm will not be triggered if the door/window is opened. C. The door/window needs to be closed before the preset bypass time, otherwise the alarm will be triggered again. D. The BYPASS feature only takes effect one time. If you closes the door within the valid bypass time and opens it again, the alarm will be triggered. E. If you triggers the door sensor rst and then presses the bypass button, the alarm will be triggered and must be turned off in the keypad. F. After you press the bypass button, you must open the door or window within 1 minute, otherwise this feature will not take effect. If the sensor is removed from the bracket, it will trigger the anti-tamper switch and send a notication to the app. When installing, please be sure that the sensor is well mounted to avoid false notications. 14 Installation 1 Mounting the Siren Hub IMPORTANT: Be sure that when choosing your location, that it Can easily be seen when the strobe is ashing. You can hear the alarm. There is a good 2.4GHz Wireless network. There is a wall socket nearby that is not controlled by a wall switch. The Siren Hub (AA) can be mounted on the wall or ceiling. AA Plug the Power Cable (FF) into Siren Hub (AA) . Ensure Power Cable (FF) inside the wire duct. AA FF Pull out the battery insulator pull tab to activate the battery. AA Remove the Bracket (H) from the Siren Hub
(AA) by following the below arrow direction. AA H Hang the Siren Hub (AA) on the Bracket (H) by following the direction of "UP" arrow on the back of Bracket (H) or following the opposite direction of the Open arrow on the front of Bracket (H). Decide upon your placement position and attach the bracket with either Screws (HH) or preinstalled double-sided adhesive tape. H AA Connect the Power Adapter (FF) to wall socket that is not controlled by a wall switch. OR HH FF 15 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Installation (continued) 2 Install the Keypad IMPORTANT:
Do not install the keypad:
Outdoors. Near large metal objects or mirrors as they sometimes cause radio signal interference. Near main wiring. Pull out the battery insulator pull tab to activate the battery. Remove the Bracket (N) from the Keypad(BB) by following the direction of the unlock marked on the side of Keypad (BB). Hang the Keypad (BB) on the Bracket (N) by following the direction of lock marked in the side of Keypad (BB). Unlock BB Lock N N BB Decide upon your placement position and attach the Bracket (N) with either Screws (HH) or double-sided adhesive tape (GG). OR HH N GG 16 3 Installing the Motion Sensor IMPORTANT:
Remove the clear, protective cover from the front of the motion sensor. The sensor should be placed at a height of 6.5-8 ft. above the oor for best coverage. There should be no large obstructions in front of the sensor. The sensor should not be installed in locations where there may be wide temperature changes such as near air conditioners, fans, refrigerators,or ovens/ranges. Installation (continued) The Motion Sensor (CC) can be installed on the top of a cabinet or other tall furniture, on the at surface of a wall or in a corner wall area. Decide upon your placement position and attach the Bracket (E) with either Screws (HH) or preinstalled double-sided adhesive tape. CC CC CC OR If installing on a horizontal surface, such as a tall piece of furniture or cabinet top, be sure to leave the mounting Bracket (E) in place on the back of the sensor so the anti-tampering alarm is not falsely triggered. Proper Screws (HH) locations for wall-mount installation. Remove the Bracket (E) from the Motion Sensor (CC) by following the direction of the unlock marked on the side of Motion Sensor (CC). OR Unlock E CC 17 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Installation (continued) When placed on the top of cabinet or other tall furniture, be sure the face of the sensor and the face of the furniture are ush with each other, as shown in the illustration below. This will allow the signal to be uninterrupted and maintain the best possible detection range. Pull out the battery insulator pull tab to activate the battery. Hang the Motion Sensor
(CC) on the Bracket (E) by following the direction of lock marked in the side of Motion Sensor (CC). Lock If mounted at a height of 7.4 ft. above the oor, the detection range will be approximately 26 ft. with a 11010 view angle. If mounted at a lower height, the detection range may be decreased. 4 Installing the Door/Window Sensor 11010 IMPORTANT:
The distance between Door/Window Sensor (DD) and Magnet (EE) must not exceed 1.2 inch in closed state. This sensor should not be mounted on a metal frame. This sensor should only be installed indoors. 26ft. 23 20 16 13 10 7 3 30 7 10 13 16 20 23 26ft. The Door/Window Sensor (DD) can be mounted on a door or window. 7.4ft. DD DD 5.6ft. 0 3 7 10 13 16 20 23 26ft. 18 MAX to 1.2 inch DD EE Installation (continued) Remove the Bracket (J) from the Door/Window Sensor (DD) by following the direction of the unlock marked on the side of Door/
Window Sensor (DD). Hang the Door/Window Sensor(DD) on the Bracket (J) by following the direction of lock marked in the side of Door/Window sensor (DD). Unlock Lock Decide upon your placement position and attach the Bracket (J) with either Screws (KK) or preinstalled double-sided adhesive tape. OR Pull out the battery insulator pull tab to activate the battery. 19 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Operation 1 Download the Hubspace app from the Apple App Store or the Google Play Store. 4 Tap the + button in the upper-right corner on the app screen to add your Siren Hub. 2 Sign in if you have an account, or register to create an account then sign in. 3 Connect your Security Kit to power and follow the instructions on the app screen. NOTE:
Please remove the Battery Insulator Pull Tab behind the battery from the Siren hub, Keypad and Sensors to get power connected. The siren hub need plug into power and have a non-rechargeable battery backup. This Hubspace hub requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks that your product can use. If you do not see your Wi-Fi network name when you attempt to connect your product, please check your router settings or move your product closer to your Wi-Fi router. My Home NOTE:
Bluetooth access is required for product setup. Android phones must also enable Location services to allow for Bluetooth scanning. 5 Scan the QR code on the Siren Hub or in the Quick Start Guide. HUBSPACE APP QUICK START GUIDE XXXX-XXXX XXXX-XXXX XXXX-XXXX NOTE:
If the QR code cannot be scanned, you can enter the code manually in the app. Tap Enter Code and follow the instructions. You can find the QR code on the side of siren hub housing. If the QR code is lost, you can press the siren hub reset button for 5 seconds to put into setup mode and follow the app. instructions. 20 Operation (continued) 6 Using your Security Kit System. Once the Siren Hub added successfully in the app, tap on the Home Alarm in the app. to display the controls for adding the Keypads and Sensors. Plus + in the app and follow the instructions. The Keypad or Sensor's Bracket must be removed rst when add into app.
- Manually Pair a Sensor or the Keypad: Press and hold the onboard button of sensor/keypad for 5 seconds, Siren Hub beeps and the Connectivity/Network/Pairing LED indicator starts blinking red.
- Remove all known Sensors and Keypad: Press and hold the reset button of sensor/keypad for 10 seconds Siren Hub should beep again). You need to create a 6-digit PIN code before you can use security system. Tap the "PIN Management" in the app. and follow the instructions to set up your PIN. Arming the system. Armed Away Mode:
On the keypad: Press , enter the PIN code and press . The keypad will blink 3 times and the Hub alarm LED blinking green to indicate success setting. On the App: Tap on the home page. Armed Stay (Home) Mode:
On the keypad: Press , enter the PIN code and press . The keypad will blink 3 times and the Hub alarm LED will blink green. On the App: Tap on the home page. Disarmed Mode:
On the keypad: Press , enter the PIN code and press . The keypad will blink 3 times and the Hub alarm LED will blink green. On the App: Tap on the home page. Sending an Emergency signal:
On the keypad: Press and hold for 3 seconds for emergency. On the App: Tap on the home page. Faulted sensors:
On the keypad: The indicator will be red with a sound prompt. Input the PIN code and press to preeced arming (ignoring the faulted sensors). Or press to cancel the arming operation. Other keys (except ) are disabled in this case. 21 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Operation (continued) Wrong PIN Code:
On the App: Tap OK to proceed or Cancel to cancel. On the keypad: The key backlights will ash with a sound prompt if the PIN code is not right. Input the PIN code again and press . No need to press or before re-input. Press to cancel the operation. Entry Delay Setting:
This is the time users have to disarm the system before the alarm sounds. The default delay time is 30 seconds (you can change the setting via app).The Siren Hub starts a countdown after a sensor is triggered, the delay time will also be sent to the Keypad. Exit Delay Setting:
This is the time users have to exit the house before the system arms itself. The default delay time is 30 seconds (users can change the setting via app).The Siren Hub starts countdown after Armed Away or Stay are activated, the delay time will also be sent to Keypad so that keypad beeps as well to alert the user. 7 Set up your Voice Assistant. You can connect your Smart Home Alarm System Kit to Google Home and Alexa from the Hubspace app. Or, you can sign in to the Alexa app or Google Home and connect to your Hubspace product from there. 22 Replace the Batteries The app will notify you when a devices battery gets too low. To replace the battery, please disarm the system rst to avoid unintended anti-tamper alarms. 1 Replace the Keypad batteries When you nd the battery indicator is red and receive a low battery alert through the app, follow the instructions below:
Disarm the system, and remove the keypad from the wall bracket. Open the battery compartment cover and remove the old batteries and replace with new AA batteries. Hang the keypad back on the wall bracket. 2 Replace the Door/Window sensor battery The app will notify you when a devices battery gets low. To replace the battery, please disarm the system rst to avoid unintended tamper alarm. Close the battery cover. Replace the screw on the battery cover. Hang the door/window sensor on the bracket. 3 Replace the Motion Sensor battery The app will notify you when a devices battery gets low. To replace the battery, please disarm the system rst to avoid unintended tamper alarm. Disarm the system. Remove the motion sensor from the wall bracket. Loosen the screw on the battery cover. Open the battery cover. Remove the old battery and replace with new AAA battery. Close the battery cover. Replace the screw on the battery cover. Hang the motion sensor on the wall bracket. Disarm the system. Remove the door/window sensor from the bracket. Loosen the screw on the battery cover. Open the battery cover. Remove the old battery and replace with new CR2032 battery. 23 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Specication Item Siren Hub Keypad Motion Sensor Product Size 3.19 in L x 3.19 in W x 1.6 in D
(w/Bracket) 4.29 in L x 2.52 in W x 1 in D 2.36 in L x 1.57 in W x 1.34 in D Door/Window Sensor
& Magnet 1.92 in L x 1.14 in W x .74 in D (Sensor) 1.88 in L x .32 in W x .25 in D (Magnet) Power Source Main Power:
DC, 5V1A Backup Power:
AA*3 Battery AA*3 Battery AAA*2 Battery CR2032*1 Battery Battery Life Up to 4hours Protocal Detection Range Wi-Fi/Bluetooth/
Sub-G private protocal N/A 1.5 years Bluetooth N/A 2 years 2 years Sub-G private protocal Sub-G private protocal
"11010, 26.25ft with PIR detection"
The distance between Door/Window Sensor and Magnet must not exceed 0.8 inch in closed state. Mounting Type Mounting Height Transmission Distancet Opperating Temperature Storage Temperature IP Certication 3M Adhesive Tape or Screw N/A
"WIFI:328 ft in open area BLE:131 ft in open area Sub-G:492 ft in open area"
32 F to 104 F_ Up to 85% non-
condensing 3M Adhesive Tape or Screw 47.24 in - 59.00 in above ground 3M Adhesive Tape or Screw 78.74 in - 90.55 in above ground 3M Adhesive Tape or Screw N/A 131 ft in open area 492 ft in open area 492 ft in open area 32 F to 104 F_ Up to 85% non-
condensing 32 F to 104 F_ Up to 85% non-
condensing 32 F to 104 F_ Up to 85% non-
condensing
-4 F~122 F
-4 F~122 F
-4 F~122 F
-4 F~122 F IP20 FCC/IC IP20 FCC/IC IP20 FCC/IC IP20 FCC/IC 24 Troubleshooting Problem I cannot nd the QR code. The QR code has become damaged. How do I add the Siren Hub. I lost my QR code. How do I add Siren Hub?
Solution It is on the Siren Hub housing. A copy of the QR code is also included in your products documentation. Under the QR code is a 24-digit code. You can enter those manually instead of scanning the code. 1. Make sure the product is connected to power. 2. In the Hubspace app, tap +, then Add Product. 3. On the Scan Product screen, tap the Search button in the lower-right corner. 4. Follow the on-screen instructions. Press the reset button and hold it for 5 seconds on the Siren Hub that enables it to be put into setup mode. When it enters that mode, it must indicate by beeping twice. Then it will broadcast the QR code information so that the unit can be added without using the QR code. A product is on another account. How do I transfer it?
The user will be required to put the Siren Hub into setup mode before the transfer can proceed. Pressing the siren reset button for 5 seconds into setup mode. Scan the QR code and it will transfer to your account. Check the LED indicators status. 1. Make sure the power indicator is on. 2. If both Internet and Join/Pairing indicators are off, there may be a problem with your home router. 3. If the middle Internet indicator is off, and the Join/Pairing indicator is blinking, but not at a steady pace, there may be a problem with the internet. Please check your home internet connection. You may need to reboot your router. 4. If the middle Internet indicator is off, and the Join/Pairing indicator is regularly blinking, once per second, then it means the siren hub is in setup mode. You need to use the app to add the siren hub again. Make sure the batteries are installed correctly and full of power. You may need a new pair of batteries altogether. NOTE: Do not use rechargeable batteries. Please check the motion sensor and door/window sensor to make sure all sensors are good to use. Siren Hub is listed as ofine in the app The keypad does not work and no indicator/button is lit The"Not Ready"Sensor Alert Indicator (F) of the keypad turn on 25 HOMEDEPOT.COM/Hubspace Please contact 1-877-592-5233 for further assistance. Troubleshooting Problem The Keypad does not respond when some keys are pressed sometimes Sensors are listed as ofine in the app after installation Unintended alarms by pets Unintended alarms by excessive heat or cold Unintended alarms from other items Hub Alarm LED on yellow. The Hub cannot pair more sensors Solution When the keypad is communicating with the hub, it will not respond to button presses. When the Faulted Sensor indicator is red, only Conrm, Cancel and the Emergency buttons are allowed to be pressed. When no mode swithing key is pressed, the keypad will not respond to number, Conrm and Cancel keys pressing. They may be too far from the siren hub. Try and move the siren hub closer to the location of the sensors. Please try and position the sensor where they will not be triggered by pets. Vibration or movement caused by pets bumping a sensor may trigger the sensor. Please keep sensors away from the following:
Direct sun exposure, electric heaters, heat vents, replaces, drafty windows, air conditioners and AC vents. When placing your sensors in the home, please be aware that some things such as billowing curtains, ceiling fans and sometimes shadows can trigger the sensor. One or more sensors disconnected, sensor is not ready or system arm bypassed. The Siren hub only can access up to 32 sub-devices. The paired sub-
devices need to be removed before add the additional new sub-devices if existing paired is over 32 sub-devices. 26 IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et D veloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autoris e aux deux conditions suivantes :
1)L'appareil ne doit pas produire de brouillage;
2)L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur.Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre leradiateur et votre corps.
Questions, problems, missing parts? Before returning to the store, 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/Hubspace Retain this manual for future use.
1 | label and location | ID Label/Location Info | 371.86 KiB | November 09 2023 |
Door/Window Sensor Model:SSCA20BP4 Battery:CR2032*1 3VDC FCC ID:2AB2Q-
Date Code:
Made in China 1.4mm WW/YY T h e l a b e l w a s c a r v e d i n t o t h e p r o d u c t w i t h r a d i u m .
1 | Agent for service Attestation from Agent | Attestation Statements | 246.54 KiB | November 09 2023 |
LEEDARSON AMERICA INC. Date: 4/14/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Grantee Code: 2AB2Q Grantees FRN: 0023443971 To whom it may concern:
FCC US Agent LEEDARSON AMERICA INC. FCC FRN: 0033657479 Agent Contact Name: Joe Chen Agent US Address: 300 Technology CT Suite 100, Smyrna GA. The USA. 30082 Agent Email Address: THD-BIZ@leedarson.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of LEEDARSON LIGHTING CO., LTD. (the applicant) for the above grantee code. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, On dat. Authorized Agent Contact Person Name: Joe Chen Agent contact Job Title: General Manager Agent Company name: LEEDARSON AMERICA INC.
1 | Agent for service Attestation from Applicant | Attestation Statements | 104.38 KiB | November 09 2023 |
LEEDARSON LIGHTING CO., LTD Date: 10/13/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID:2AB2Q-SSCA20BP4 Grantees FRN:0023443971 LEEDARSON LIGHTING CO., LTD (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information:
Contact Person:Joe Chen Company Name:LEEDARSON AMERICA INC. Company Address:300 Technology CT Suite 100, Smyrna GA. The USA.30082 FRN:0033657479 Email:THD-BIZ@Leedarson.com Sincerely yours, Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of Personsafety engineer Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:10/13/2023
1 | FCC 2.911[d][5] Attestation | Attestation Statements | 111.65 KiB | November 09 2023 |
LEEDARSON LIGHTING CO., LTD Date: 10/13/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(5) Attestation FCC ID: 2AB2Q-SSCA20BP4 Grantees FRN:0023443971 1. LEEDARSON LIGHTING CO., LTD (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. LEEDARSON LIGHTING CO., LTD (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of Personsafety engineer Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:10/13/2023
1 | confidentiality request letter | Cover Letter(s) | 84.65 KiB | November 09 2023 |
LEEDARSON LIGHTING CO., LTD Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:
Request for Confidentiality FCC ID:
2AB2Q-SSCA20BP4 To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: LEEDARSON LIGHTING CO., LTD Contact Name: Vick Zhang Title of Personsafety engineer Address: Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian, China Date:10/13/2023
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-11-09 | 902 ~ 928 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-11-09
|
||||
1 | Applicant's complete, legal business name |
LEEDARSON LIGHTING CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0023443971
|
||||
1 | Physical Address |
Xingda Road, Xingtai Industrial Zone
|
||||
1 |
Zhangzhou, Fujian, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB2Q
|
||||
1 | Equipment Product Code |
SSCA20BP4
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
V******** Z******
|
||||
1 | Title |
safety engineer
|
||||
1 | Telephone Number |
(86) ********
|
||||
1 | Fax Number |
(86) ********
|
||||
1 |
c******@leedarson.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Door/Window Sensor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
1 | Name |
S******** G****
|
||||
1 | Telephone Number |
+86 0********
|
||||
1 |
S******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 902.00000000 | 928.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC